manufacturing plant & equipment, vehicles, trailers & stock - O'Maras ...
manufacturing plant & equipment, vehicles, trailers & stock - O'Maras ...
manufacturing plant & equipment, vehicles, trailers & stock - O'Maras ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
AUCTION CATALOGUE<br />
Wednesday 20th March 2013<br />
MANUFACTURING PLANT<br />
& EQUIPMENT, VEHICLES,<br />
TRAILERS & STOCK<br />
From: 10:30am<br />
PLEASE NOTE: Vehicles, Trailers & Forklifts will be sold at 12:00PM<br />
17 Kenna St, Orange NSW 2800<br />
(Entrance via Barret Court)<br />
Inspection: Morning of sale from 8am<br />
Terms of Sale: A Buyers Premium of 10% applies to motor <strong>vehicles</strong> and 15% will be added<br />
to all other lots sold. 25% cash deposit required on the fall of the hammer unless prior<br />
arrangements are made with the auctioneer. This sale is GST inclusive.<br />
ALL GOODS MUST BE PAID FOR IN FULL BY 12 NOON THURSDAY 21ST MARCH<br />
AND REMOVED BY 4:00PM FRIDAY 22ND MARCH 2013 NO EXCEPTIONS.<br />
Please note: Some items may be removed prior to sale. Please check with the auctioneer on the morning of sale.<br />
02 9555 7000<br />
www.omaras.com.au
TERMS AND CONDITIONS OF SALE<br />
1. INTERPRETATION<br />
1.1. “Auctioneer” means A.C.N. 073 168 680 Pty Limited A.C.N. 073 168 680 trading as O’Maras Valuers & Auctioneers A.B.N. 83 073 168 680 and any of its<br />
subsidiaries (as defined in Section 46 of the Corporations Act 2001 (Cth)) and includes, where the context permits, the person conducting the auction<br />
sale on its behalf;<br />
1.2. “Purchaser” means a purchaser of a lot and where there is more than one, jointly and severally;<br />
1.3. “Vendor” includes each and every one of the owners of the subject lot and the person or company instructing or authorising the Auctioneer to offer that lot for sale<br />
and where more than one, jointly and severally.<br />
2. THE PURCHASER<br />
2.1. The Vendor has the right to bid.<br />
2.2. Subject to any reserve price and/or the discretion of the Auctioneer, the highest bidder at an Auction is the Purchaser.<br />
2.3. In the event of any dispute arising between bidders in relation to a lot, the Auctioneer is entitled, in his/her absolute discretion:<br />
2.3.1. settle the dispute between the bidders; or<br />
2.3.2. submit the lot for sale by auction.<br />
2.4. In either circumstance set out in clause 2.3, the decision of the Auctioneer shall be final.<br />
3. PAYMENT<br />
3.1. Unless otherwise agreed, each lot must be paid for by cash or bank cheque immediately on completion of the sale of a lot, and prior to delivery of that lot to the<br />
Purchaser.<br />
3.2. Where applicable, the Purchaser must pay GST. The Auctioneer will announce whether the sale/or particular lots are sold GST inclusive,<br />
GST exclusive or GST free.<br />
3.3. The Purchaser agrees to pay any buyers premium or processing charge which may be applicable.<br />
3.4. If there is more than one Purchaser, then each Purchaser is jointly and severally liable to pay for all said lots.<br />
4. THE BID<br />
4.1. Unless the Auctioneer specifically states otherwise:<br />
4.1.1. each bid must be at least twenty five percent (25%) in advance of the previous bid;<br />
4.1.2. no party is allowed to retract his or her bid after making it.<br />
4.1.3. the Auctioneer may accept or refuse any bid or bids without having to state his/her reasons.<br />
4.1.4. prior to bidding the Purchaser must complete a Bidder’s Registration form and provide:<br />
4.1.4.1. his or her name and residential address;<br />
4.1.4.2. identification;<br />
4.1.4.3. if the Auctioneer requires, must immediately pay down twenty-five cents in the dollar in part payment purchase money.<br />
4.2. If the Purchaser fails to comply with clause 4.1.4.3, the Auctioneer may in his/her absolute discretion immediately submit the lot or lots for re auction.<br />
5. PRINCIPAL<br />
5.1. The Auctioneer assumes that the Purchaser is the Principal.<br />
5.2. The Purchaser and the Vendor authorise the Auctioneer and/or the Auctioneer’s clerk to sign the all documents necessary to complete the sale of any lot.<br />
5.3. The Sale Book and these conditions, except as otherwise provided by State or Federal law, constitute the whole contract between:<br />
5.3.1. the Vendor and the Purchaser;<br />
5.3.2. the Vendor and the Auctioneer; and<br />
5.3.3. the Auctioneer and the Purchaser.<br />
6. RISK<br />
6.1. On the fall of the hammer:<br />
6.1.1. each lot shall be at the Purchaser’s risk and expense;<br />
6.1.2. notwithstanding clause 6.1.1, if delivery is made or possession of the lot is obtained by the Purchaser or his/her representative<br />
prior to the payment of the purchase money, then the property in the lot does not pass to the Purchaser until payment in full by<br />
the Purchaser of the purchase money or the clearing of any cheque given on account of same.<br />
6.2. The Purchaser is responsible for all security measures and insurances in relation to the lot.<br />
6.3. The Purchaser is required to effect all/any insurances at his/her expense.<br />
7. NO WARRANTY<br />
7.1. Except as otherwise provided by state or federal law, no condition or warranty is given (whether express or implied) by the Auctioneer with<br />
any lot offered.<br />
7.2. Bidders must satisfy themselves by inspection or otherwise as to the nature and condition of the goods offered for sale.<br />
7.3. All lots are available for inspection prior to commencement of sale and it is deemed that the Purchaser has inspected the goods.<br />
7.4. Each lot is sold “as is”, according to these conditions. The Purchaser acknowledges this fact and accepts responsibility for making their own investigations and<br />
inspections with respect to any lot in which they may be interested before the auction.<br />
7.5. Except as otherwise provided by state or federal law, the Auctioneer is not liable to pay any compensation in respect of fault or error of description of any lot sold.<br />
7.6. Any statement as to the quantity is approximate only and is as represented to the Auctioneer by the Vendor. The Auctioneer gives no warranty that the quantities<br />
stated are correct. In addition to any other rights the Purchaser may have, compensation for shortages in quantity shall be given if demanded in writing before<br />
delivery of the goods. If any dispute as to compensation arises, the dispute shall be settled by an arbitrator who shall be somebody mutually agreed upon by both<br />
parties. If there is no agreement, then the dispute shall be settled by an arbitrator appointed the president of the Institute of Chartered Accountants.<br />
8. REMOVAL OF LOTS<br />
8.1. To prevent inaccuracy in delivery and inconvenience in the settlement of purchases, the Purchaser must not remove any lot during the sale.<br />
8.2. The Purchaser must remove all lots purchased within one (1) day of the completion of the sale or as specified at the time of sale.<br />
9. DEFAULT<br />
9.1. If any Purchaser fails to comply with any of these conditions or if any cheque given on account of his/her purchase is dishonoured, any moneys which the Purchaser<br />
has paid to the Auctioneer on account of his/her purchase or purchases is absolutely forfeited to the Vendor. In this event, the Vendor and/or the Auctioneer is at<br />
liberty to sue the Purchaser for damages, or at their option, to resell the lot in any manner and upon such terms and conditions as they think proper.<br />
9.2. All losses and expenses incurred by the Vendor and/or the Auctioneer resulting from any resale pursuant to clause 9.1 and all damages which the Vendor and/or<br />
the Auctioneer may sustain are recoverable from the Purchaser as liquidated damages. The Vendor and/or the Auctioneer is not obliged to give any<br />
notice of a resale. Without limiting the generality of the foregoing, the Auctioneer is entitled in the event of a resale to:<br />
9.2.1. the amount of any commission and buyer’s premium lost on a purchase as a result of the purchaser not proceeding with the<br />
purchase;<br />
9.2.2. the cost of advertising in respect of any such purchase;<br />
9.2.3. any other costs incurred in such resale.<br />
02 9555 7000<br />
www.omaras.com.au
TERMS AND CONDITIONS OF SALE<br />
10. WAIVER<br />
10.1. The Purchaser is deemed to have waived or abandoned any claim under these conditions unless the claim is made at or before the time the goods leave the auction<br />
site (“Premises”).<br />
10.2. No servant or agent of the Auctioneer is authorised to waive, add to or vary these terms and conditions without written authority of the Company Secretary or the<br />
Managing Director.<br />
11. PREMISES<br />
11.1. All members of the public, including Purchasers, enter the Premises entirely at their own risk.<br />
11.2. Purchasers and members of the public are warned that dangerous machinery, chemicals or other dangerous items and features may be on the Premises. Everyone<br />
entering these premises should be careful.<br />
11.3. The Purchaser indemnifies the Auctioneer, the Vendor and the owner of the Premises against any damage whatsoever caused by the Purchaser or his/her servants<br />
during removal of goods.<br />
12. WITHDRAWAL OF LOTS FROM SALE<br />
12.1. Items may be withdrawn from Auction without any prior notice to bidders and the Auctioneer is not liable for any loss or compensation whether consequential or<br />
otherwise.<br />
13. COPYRIGHT<br />
13.1. The Purchaser recognises that there may be software installed on computer <strong>equipment</strong> and that use of such software, without license may infringe the rights of the<br />
software owner. Prospective Purchasers should consider terms and conditions contained in licensing agreements before purchase. The Purchaser expressly<br />
undertakes to be bound by the terms and conditions of the license for any software which may be installed on computer <strong>equipment</strong> purchased at auction.<br />
13.2. The Purchaser indemnifies the Vendor and the Auctioneer against any legal action or claim by the software owner or any third party in relation to any breach of<br />
copyright, moral rights and any other intellectual property rights.<br />
14. ADVERTISEMENTS AND REPRESENTATIONS<br />
14.1. Advertisements or brochures for the auction or forthcoming sales are statements of opinions and are not to be relied upon as statements or representations of fact.<br />
14.2. If there is any reference to the state of repair, condition, fitness or quality of any goods by the Auctioneer, the Purchaser acknowledges that such reference is<br />
information provided by the Vendor and if any dispute arises in such respect then the Purchaser must not take any action against the Auctioneer in<br />
relation to such dispute or any subsequent claim, action or court proceeding and the Purchaser agrees to indemnify the Auctioneer from and against all<br />
liability (including costs on a full indemnity basis) which may be incurred by the Auctioneer in relation to any such dispute, subsequent claim, action or<br />
court proceeding.<br />
15. AUCTIONEERS RIGHTS<br />
15.1. The Auctioneer and vendor reserve the following rights which may be exercised by the Auctioneer without giving any reason:<br />
15.1.1. to not offer for sale any lot described in the catalogue;<br />
15.1.2. to offer for sale part only of any lot described in the catalogue;<br />
15.1.3. to offer two or more of the lots described as separate lots in the catalogue for sale together as one lot;<br />
15.1.4. if any goods or lots described as separate lots in the catalogue are offered for sale together as one lot and not knocked down to<br />
a successful bidder, to offer such goods or lots for auction as separate lots;<br />
15.1.5. to withdraw any lot or lots from sale;<br />
15.1.6. to refuse to accept the bidding of any person or persons;<br />
15.1.7. to refuse any person or persons admission to or eject them from the auction site;<br />
15.1.8. to refuse to accept any bid for a lot being less than a sum name from time to time by the auctioneer;<br />
15.1.9. to keep secret the existence and quantum of the reserve price, if any of a lot prior to the close of bidding or withdrawal of the lot.<br />
16. SALE OF PLANT IN NEW SOUTH WALES<br />
16.1. The Purchaser acknowledges that:<br />
16.1.1. the Occupational Health & Safety Act 1983 (the “Act”) and the subsequent Occupational Health & Safety Regulations<br />
(“Regulations”) impose obligations in respect of safety for workers arising out of the design, manufacture and supply of <strong>plant</strong> and <strong>equipment</strong> for use in<br />
the workplace;<br />
16.1.2. the Auctioneer and the Vendor have warned prospective Purchasers that no <strong>plant</strong> offered for sale is fit for use in any workplace and it is the Purchaser’s<br />
or users responsibility to ensure that the <strong>plant</strong> is brought to a standard necessary to comply with the Act and the Regulations before using it and to carry<br />
out testing and examination to ensure it is safe and fit for use in the workplace;<br />
16.1.3. any relevant occupational health and safety information (if any) with any <strong>plant</strong> or <strong>equipment</strong> was prepared by the designer or manufacturer. The<br />
Purchaser must not make any claim against the Auctioneer whatsoever in relation to such information and neither the Auctioneer nor the Vendor make<br />
any representation in relation to the information whatsoever, including in regards to the validity or the correctness of it;<br />
16.1.4. where no such information and/or records are available or cannot otherwise be developed:<br />
16.1.4.1. no liability for the actions of same is assumed by the Auctioneer and/or the Vendor;<br />
16.1.4.2. the Auctioneer and the Vendor have advised the Purchaser that the <strong>plant</strong> <strong>equipment</strong> can only be sold for the purposes of scrap or spare<br />
parts;<br />
16.1.4.3. the Purchaser must not make a claim against the Auctioneer whatsoever in relation to the non-existence of such information;<br />
16.1.5. it is the responsibility of the Purchaser to ensure that the Purchaser seeks to ascertain the information and/or records of the Purchaser’s own accord.<br />
16.2. Breaches of the Act or the Regulation carry very heavy penalties. In the interest of health and safety for workers, safety inspections of all <strong>plant</strong> purchased at auction<br />
must be performed by the Purchaser. Where <strong>plant</strong> is to be used in areas not covered by the Act and the Regulations the Purchaser should regard the <strong>plant</strong> as unfit<br />
for use.<br />
17. CAPACITY<br />
17.1. The Purchaser hereby warrants to the Auctioneer that the Purchaser is over eighteen (18) years of age and has capacity to make a legally binding contract.<br />
18. INDEMNITY<br />
18.1. The Auctioneer is acting as agent for the Vendor. If there is any claim or a dispute arises by the Purchaser (whether before or after the Auctioneer has paid the<br />
Vendor) then such dispute or claim shall be between the Purchaser and the Vendor.<br />
18.2. The Purchaser agrees that the Auctioneer shall be excluded from any subsequent action or court proceedings (“Proceedings”).<br />
18.3. The Purchaser agrees to indemnify and keep indemnified the Auctioneer for any liability or costs incurred by the Auctioneer in relation to any Proceedings. This<br />
clause shall not merge on completion.<br />
02 9555 7000<br />
www.omaras.com.au
INFORMATION FOR BUYERS<br />
PLEASE NOTE: THERE IS NO ONSITE PARKING ALLOWED, AMPLE STREET PARKING IS AVAILABLE.<br />
BUYERS PREMIUM<br />
A buyer’s premium of 15% will be added<br />
to the price of each lot sold.<br />
E.g. bid $100.00, invoice will be $115.00<br />
inclusive of GST.<br />
BANK DETAILS FOR<br />
DIRECT DEPOSIT<br />
Bank: Westpac Name: O’Maras<br />
BSB: 032 102 Account No: 470 798<br />
COLLECTION<br />
Full payment must be settled by 12 noon<br />
the day following the auction.<br />
Goods cannot be collected until paid for<br />
in full. Goods may NOT be collected until<br />
after the auction is completed.<br />
Collection is available 8am to 4pm<br />
weekdays only. THE DEADLINE FOR<br />
PICK UP IS 4PM FRIDAY 22ND MAR<br />
(No Exceptions)<br />
A minimum storage fee of $10.00 per item<br />
per day will apply after this. Larger items<br />
will incur a higher fee.<br />
PAYMENT<br />
A deposit of 25% of the invoice total<br />
is due on the day of the auction. Full<br />
payment must be settled by 12 noon<br />
the following day.<br />
Payment Types:<br />
Cash - Bank Cheque - EFTPOS<br />
Credit Cards<br />
Applicable Charges:<br />
Mastercard / Visa - 1.5%<br />
Amex - 3.2%<br />
Please Note: Personal or Company<br />
cheques will not be accepted<br />
PICK UPS<br />
We will assist where possible; however<br />
it is the buyer responsibility to arrange<br />
labour & transport.<br />
INSURANCE<br />
All items are at the purchaser’s risk and<br />
expense on the fall of the hammer. You<br />
must effect your own insurance.<br />
NOTE<br />
All sales are final. No refunds. No<br />
warranty (unless other wise specified)<br />
Visit our website for the latest news & online bargains<br />
www.omaras.com.au<br />
02 9555 7000<br />
www.omaras.com.au
<strong>O'Maras</strong> Valuers & Auctioneers<br />
112 Lilyfield Road<br />
Lilyfield NSW 2040<br />
Catalogue<br />
Phone 02 9555 7000<br />
www.omaras.com.au<br />
Plant & Equipment<br />
Wednesday 20 Mar 2013<br />
Trailer Manufacturer<br />
Starting at:<br />
To be held at: 17 Kenna Street Orange NSW 2013<br />
10:30 AM<br />
Terms: Cash, EFTPOS, Direct Deposit and Credit Cards (a 1.5% surcharge applies<br />
Credit Card Payments)<br />
Lot GST* Lot<br />
GST *<br />
1 BOSCH 9" angle grinder (not tested)<br />
[1.76]<br />
2 BLACK & DECKER WP1500KXE<br />
sander/polisher (not tested) [1.60]<br />
3 BLACK & DECKER WP1500KXE<br />
sander/polisher (not tested) [1.60]<br />
4 HITACHI SAT180 angle grinder, 180mm<br />
diameter disk capacity (not tested)<br />
5 HITACHI G135C2 angle grinder, 125mm<br />
diameter disk capacity (not tested)<br />
6 MAKITA 5900B circular saw (not tested)<br />
7 MAKITA 4131 circular saw, 185mm<br />
diameter blade (not tested)<br />
8 HITACHI PSW9 circular saw, 235MM<br />
diameter blade (not tested)<br />
9 MAKITA 4323 jigsaw (not tested)<br />
10 METABO heavy duty sander, 6000<br />
oscl/min (not tested)<br />
11 BOSCH 1506.1 metal shearer (not<br />
tested)<br />
12 MAKITA impact wrench, ¾" (not tested)<br />
13 MAKITA 6906 impact wrench, ¾" (not<br />
tested)<br />
14 MAKITA 6905B impact wrench, ½" (not<br />
tested)<br />
15 MAKITA HP1630 hammer drill (not<br />
tested)<br />
16 HITACHI DV16VS5 power drill, steel &<br />
concrete switch (not tested)<br />
17 MAKITA 6413 power drill (not tested)<br />
18 HITACHI DV20VB2 power drill, steel &<br />
concrete switch (not tested)<br />
19 ATRA ACE magnetic drill, Model: AF30,<br />
680w rated motor, 17.5 - 30mm<br />
diameter bit (not tested) [1.67]<br />
20 IRWIN Record No. 5 bench vice, 80mm<br />
wide grip<br />
21 IRWIN Quick Grip trigger vice, large<br />
22 2 x IRWIN Quick Grip trigger vice,<br />
medium<br />
*GST is included in the hammer price of items indicated<br />
23 3 x IRWIN Quick Grip trigger vice, small<br />
24 5 x Assorted F- Clamp, small<br />
25 2 x Assorted F-Clamp, medium & large<br />
26 BOSTITCH Magnesium pneumatic<br />
staple gun (not tested)<br />
27 2 x Assorted pneumatic rivet gun (not<br />
tested)<br />
28 Unbranded pneumatic angle grinder,<br />
approx 230mm diameter drill capacity<br />
(not tested)<br />
29 TORQUE Point Industrial air impact<br />
wrench, ¾" (not tested)<br />
30 Unbranded air impact wrench, ½" (not<br />
tested)<br />
31 Unbranded air impact wrench, ½" (not<br />
tested)<br />
32 Unbranded air impact wrench, ½" (not<br />
tested)<br />
33 Alphanumeric punch set [1.30]<br />
34 Assorted drill bits<br />
35 2 Tier fabricated workbench, yellow<br />
duco, 1400 x 2200mm<br />
36 3 x Assorted 2 tier workbench, yellow &<br />
blue steel<br />
37 HAFCO geared head drill with reverse<br />
tapping, Model: GHD-35, S/N: 780710,<br />
DOM: 07/89 (not tested) [1.57]<br />
38 HAFCO METALMASTER SBD-20B 1HP<br />
16 speed pedestal drill with jig (not<br />
tested) [ 1.54]<br />
39 SKIL double ended pedestal grinder<br />
200mm (not tested) [1.58]<br />
40 4 x Drum of checker steel tail light<br />
brackets<br />
41 Oil spill bind tank, 200L<br />
42 Oil spill bind tank, 200L<br />
43 Oil spill bind tank, 200L<br />
44 Oil spill bind tank, 200L<br />
45 14 x Ute tool box (Unfinished)<br />
Page 5 of 15
Lot GST* Lot<br />
GST *<br />
46 7 x Ute tool box (Unfinished)<br />
47 Pallet of assorted tray parts<br />
48 Pallet of tail light stone, protectors &<br />
number plate brackets (checkered steel)<br />
49 60 x Set of UNI LOCK tray body<br />
fasteners & hinges<br />
50 Allowance for 6 drums of checkered<br />
steel tray body steps & fabricated shelf<br />
50a<br />
Contents to room incl. 2 x metal shelves<br />
& quantity of cabinets<br />
51 7 x Bucket of assorted tray parts & 3<br />
tiered fabricated shelf<br />
52 Pallet of tray mud guards<br />
53 GEMA type PAC1 powder gun control,<br />
98KVa, rated high voltage, dial controls,<br />
4-bar maximum pressure with powder<br />
gun (not tested)<br />
54 GEMA CG01 Easy Ionic powder gun<br />
control, digital control, 6-bar maximum<br />
pressure, with powder gun & OMI air<br />
driver (not tested)<br />
55 HOFMANN Monty 32 tyre changer, 16<br />
bar maximum pressure (not tested)<br />
[1.36]<br />
56 COMPAK twin cylinder 18.20 CFM<br />
mobile compressor (not tested) [1.74]<br />
57 PILOT twin cylinder air compressor, 250<br />
psi maximum pressure, 1400mm<br />
horizontal receiver tank (not tested)<br />
57a<br />
57b<br />
57c<br />
UNI-MIG 330 mig welders, Workshop<br />
series, with internal wire feeder, on<br />
trolley (not tested) [1.59]<br />
UNI-MIG 345 mig welder, Workshop<br />
series with internal wire feeder, on trolley<br />
(not tested) [1.62]<br />
UNI-MIG 330 mig welders, Workshop<br />
series, with internal wire feeder, on<br />
trolley (not tested) [1.59]<br />
58 MIG-O-MAG 315 mig welder, on trolley<br />
(not tested) [1.64]<br />
59 BOC mig 320R welder with wire feeder,<br />
on trolley (not tested) [1.18]<br />
60 UNI-MIG 375S/T series spot welder,<br />
with wire feeder KT-50 (not tested) [1.07]<br />
61 UNI-PLAS 703 plasma cutter, on castors<br />
(not tested) [1.09]<br />
62 ESAB Smashweld 180 welders with in<br />
built wire feeder, on trolley (not tested)<br />
[1.11]<br />
63 ESAB Smashweld 250 welders with in<br />
built wire feeder, on trolley (not tested)<br />
[1.11]<br />
64 UNI-MIG 330 mig welder, Workshop<br />
series, inbuilt wire feeder, on trolley (not<br />
tested) [1.65]<br />
*GST is included in the hammer price of items indicated<br />
65 ESAB Power Compact 315 welder with<br />
traveller wire feeder, on trolley (not<br />
tested) [1.69]<br />
66 UNI-MIG 3013 welder and wire feeder<br />
(not tested) [1.70]<br />
67 UNI-MIG 3023S welder with KT50 wire<br />
feeder (not tested)[1.75]<br />
68 ESAB Power Compact 315 ECF welder<br />
with wire feeder (not tested)<br />
69 RADIAL arm saw RA2500, 25" running<br />
grinder, 180 degree swing, 10" blade,<br />
240v (not tested)<br />
70 2 x Fabricated 2 & 3 tier tray heavy duty<br />
workbenches<br />
71 Fire extinguisher holder (medium - small)<br />
72 Quantity of assorted sheet metal &<br />
checker plate offcuts to pallet<br />
73 Quantity of timber panel lining & joiners<br />
to pallet<br />
74 10 x Scissor frame tipper kits to pallet<br />
75 Quantity of mesh offcuts to 2 pallets<br />
76 3 Sheets metal checker plate approx<br />
3000 x 1200 x 5mm & quantity of RHS &<br />
tube offcuts to pallet<br />
77 Quantity of assorted tray parts to pallet<br />
78 Quantity of assorted drop axle plates<br />
78a<br />
Quantity of pivot plates & assorted<br />
components to pallet<br />
79 Quantity of steel offcuts to 2 pallets<br />
80 Quantity of trailer parts, fittings to pallet<br />
81 Quantity of assorted trailer mudguards<br />
to pallet<br />
82 quantity of assorted Mig & Tig welding<br />
wire reels & rod to pallet<br />
83 Pair of FORD F100 PVC front grille<br />
84 Caravan double folding step<br />
85 Approx 17 x boxes containing assorted<br />
rubber & sponge extrusions<br />
86 CSM Alloy underbody tool box, no key,<br />
RHF 600mm<br />
87 CSM Alloy underbody tool box, no key,<br />
RHF 600mm<br />
88 CSM Alloy underbody tool box LHF, no<br />
key, 800mm<br />
89 CSM Alloy underbody tool box RHF, no<br />
key, 800mm<br />
90 CSM Alloy underbody tool box RHF, no<br />
key, 800mm<br />
91 CSM Alloy underbody tool box RHF, no<br />
key, 800mm (in box)<br />
92 CSM Alloy underbody tool box RHF, no<br />
key, 800mm (in box)<br />
Page 6 of 15
Lot GST* Lot<br />
GST *<br />
93 KENDA 22 x 1100 wheel & tyre +<br />
quantity of assorted components<br />
94 7 x Brass hose tails (assorted sizes)<br />
95 3 x 3" ball valves<br />
96 4 x 1 ½ Ball valves<br />
97 Quantity of assorted Stortz fittings<br />
98 5 x 3" Brass suction strainers<br />
99 Quantity of galvanised pipe fittings incl. 7<br />
x 3" elbows<br />
100 Quantity of unfinished tool box panels to<br />
pallet<br />
101 Large fabricated metal tool box approx<br />
1500 x 1000 x 600 deep (no lock)<br />
102 Fabricated 3 tier metal workbench<br />
approx. 4200 long with vice<br />
103 3 x Horse float tailgate springs<br />
104 6 x Horse float tailgate springs<br />
105 4 x Horse float tailgate springs<br />
106 5 x Horse float tailgate springs<br />
107 6 x Horse float tailgate springs<br />
108 5 x Horse float tailgate springs<br />
109 5 x Horse float tailgate springs<br />
110 5 x Horse float tailgate springs<br />
112 12v Powerpack (used)<br />
113 Fabricated mobile trailer light test cart<br />
114 Unfinished metal tool box shell approx<br />
1800 x 800 x 900<br />
115 Air tailgate cylinder to box<br />
116 12 v Double acting hydraulic powerpack<br />
117 Mega hydraulic 74v powerpack to box<br />
118 5 x Assorted pendant controls to box<br />
119 Band stainless steel strapper and part<br />
reel<br />
120 2 x Panels suit HOLDEN Rodeo<br />
122 Quantity of assorted P.T.O. components<br />
& gasket metals to pallet<br />
123 Table top tool chest, 2 door approx<br />
1700mm long, no keys<br />
124 Table top tool chest, 2 door approx<br />
1700mm long, no keys<br />
125 60 litre PVC water tank (used)<br />
126 63 litre PVC water tank (used)<br />
127 86 litre PVC water tank (used)<br />
128 200 litre diesel tank suit FUSO Fighter<br />
c/w chassis mount straps<br />
129 STRATOS hydraulic car seat<br />
130 PAR VELOX wheels & tyre on chassis<br />
mount<br />
131 2 x Fabricated workshop cooling fans<br />
132 Quantity of assorted hose lengths to box<br />
133 Quantity of metal sheet stampings<br />
assorted shapes<br />
134 Quantity of undrilled hubs to tub<br />
135 KIP Air air block to box<br />
136 TJM T13 Outback Prontal Protection<br />
System Mitsubishi Triton MN09+ to box<br />
137 Unbranded booster<br />
138 PZB Bolonga 3-10762 P.T.O.<br />
139 Quantity of horse float panels, gates &<br />
cushion to floor<br />
140 2 x SUNRAYSIA 15" 6 stud Landcruiser<br />
wheels<br />
141 6 x SUNRAYSIA 14" FORD wheels<br />
142 FORPE horizontal band saw<br />
143 DAIKIN commercial air conditioner to<br />
pallet (used). AS IS<br />
144 3 x Assorted sink units (one with hot<br />
water system) on stand<br />
145 Quantity of ute tail lights & branded mud<br />
flaps to cage pallet<br />
146 1 x 3, 1 x 2 Banks of metal clothes<br />
lockers<br />
147 G & C 1800mm under tray Rolloc drawer<br />
unit<br />
149 ATLAS COPCO air compressor, Model:<br />
GA208 (not tested)<br />
149a<br />
FLUIDAIR refrigerator/dryer (not tested)<br />
150 INGERSOLL RAND 450 CFM air<br />
compressor SSR EP/100/50 (not tested)<br />
150a<br />
150b<br />
CHAMPION refrigerator/dryer, Model:<br />
CRD450 (not tested)<br />
Unbranded receiver tank, 1600 kpa max<br />
pressure, estimated 2,000L (not tested)<br />
152 Unbranded truck hoist 3 stage mast on<br />
swivel base<br />
153 OSTER pipe bolt machine, Model: 552,<br />
415v. AS IS (not tested)<br />
153a<br />
Quantity of assorted chipboard to pallet<br />
155 Cylinder cage<br />
156 Cylinder cage<br />
157 Mobile trolley<br />
158 5 x Fabricated welding screens<br />
159 23 x Fabricated metal workhorses<br />
160 17 x Tray body stands<br />
161 Exhaust fan unit 240v to pallet (not<br />
tested)<br />
161a<br />
Drawing board with machine on stand<br />
*GST is included in the hammer price of items indicated<br />
Page 7 of 15
Lot GST* Lot<br />
GST *<br />
162 5 tier metal shelf and contents including<br />
fasteners, radio etc<br />
163 Workbench approx. 1800mm long, in<br />
metal with vice and contents including<br />
163a<br />
TOOLEX spanners and screwdrivers to<br />
wall<br />
164 TOOLEX air hose reel<br />
165 4 Post PROLIFT 12,000LB lift hoist,<br />
Note: average condition<br />
166 ARMSTRONG trolley jack<br />
167 2 Mobile tool trays<br />
168 2 x Metal cage<br />
170 Fabricated hydraulic pipe bender on<br />
stand with cover<br />
171 ATS 500 truck crane, 2 stage 2000mm<br />
maximum extension, 475kg SWL (not<br />
tested)<br />
172 KEVREK 700 truck crane, 3 stage,<br />
2830mm maximum extension, 700kg<br />
SWL (not tested)<br />
173 Lifting chain with hook ends and hoist<br />
ring<br />
174 MEGA RAM 3032S hydraulic truck hoist,<br />
11T maximum load, 130 bar maximum<br />
pressure (not tested)<br />
175 Hydraulic cylinder, 600mm<br />
176 Hydraulic cylinder, 450mm<br />
177 2 x Hydraulic cylinder, 300mm<br />
178 Hydraulic cylinder, 300mm<br />
179 Hydraulic cylinder, 300mm<br />
180 Assorted parts including hydraulic<br />
cylinder and bracing<br />
181 Quantity of vehicle hi-vis plates to<br />
mudguards<br />
182 Checkered steel toolbox with gas lift<br />
door 600 x 800 x 1200mm<br />
183 Checkered steel toolbox with gas lift<br />
door 600 x 800 x 1200mm<br />
184 Checkered steel toolbox with gas lift<br />
door 500 x 650 x 1200mm<br />
185 Trailer hitch with lever lock<br />
186 Manual pressure tester, 3500 psi<br />
187 Pair of side steps to suit TOYOTA Hilux<br />
(New)<br />
188 Fuel tank to suit TOYOTA Hilux (New)<br />
189 FILLON PICHON paint mixing station,<br />
Model: MM220, DOM: 09/93 with 4 x 16<br />
can and 1 x 11 can mixing shelves<br />
190 Pallet of assorted items including<br />
mudguards, metal strapping,<br />
components, threading & floodlights (not<br />
tested)<br />
*GST is included in the hammer price of items indicated<br />
191 Allowance for 2 x pallets of suspended<br />
light housing<br />
192 2 x Ping pong table<br />
193 Box containing quantity of used hose<br />
lengths<br />
194 3 x Beam straightening frames<br />
195 Prototype supercharger on stand (not<br />
tested)<br />
196 Pallet of assorted chains, fasteners,<br />
springs etc<br />
197 Roll of rubber lining, 250mm wide<br />
198 MAKITA 2414 355mm cut off saw on<br />
fabricated frame (not tested)<br />
199 GV Nibller Medium, 60mm maximum<br />
cut, 3 phase<br />
200 Utility tray to suite HOLDEN Colorado or<br />
ISUZU D Max (unfinished)<br />
201 Quantity of utility tray frame and<br />
prefabricated stand<br />
202 Quantity of utility tray frame and<br />
prefabricated stand<br />
203 Quantity of utility tray frame and<br />
prefabricated stand<br />
204 Quantity of utility tray frame and<br />
prefabricated stand<br />
205 Quantity of utility tray frame and<br />
prefabricated stand<br />
206 Quantity of utility tray walls and beams<br />
with fabricated stand<br />
206a<br />
Reel of COLORBOND sheet, 1300mm<br />
wide, 50m<br />
207 Quantity of styramax cut panels<br />
(insulated)<br />
208 Allowance for quantity of assorted steel<br />
<strong>stock</strong> and <strong>stock</strong> rack<br />
209 Stock rack, 6 section, 12 tiered, yellow<br />
211 BROBO F350 cold saw, no suds pump,<br />
aluminium blade with roller conveyor<br />
(not tested)<br />
212 FLEXOVIT hot saw, Model: F16RA, S/N:<br />
1224, DOM: 11/97, with roller conveyor<br />
(not tested)<br />
213 METALMASTER SUNRISE 70T<br />
universal metal worker/punch/crop/shear<br />
with tooling Model: IW-70D, XD (not<br />
tested)<br />
214 Pallet racking, 2 bay with 3 x 4m<br />
uprights and 12 x cross beams<br />
215 Quantity of assorted steel beams and<br />
pipe<br />
215a<br />
Stock shelf, 3 stand, 5 tiered with<br />
adjustable shelf arms<br />
216 4 x Assorted tray frames<br />
Page 8 of 15
Lot GST* Lot<br />
GST *<br />
217 6 x Assorted tray frames and guards<br />
218 HYCLASS 8ft by 3mm guillotine with<br />
guarding, pedal operated<br />
219 Pallet racking with 2 x 4m uprights & 6 x<br />
cross beams<br />
220 Allowance for assorted items including A-<br />
frame ladder, A-frame/extension ladder,<br />
fabricated platform ladder & manual pipe<br />
bender<br />
221 TAURUS industrial vacuum cleaner (not<br />
tested)<br />
223 Large quantity of carpet rolls<br />
224 KERRICK industrial vacuum with hose<br />
(not tested)<br />
225 UNI-MIG Uni-tig 250 JN welder (not<br />
tested) [1.32]<br />
226 Ridged pipe threader with 4" adaptable<br />
head, Model: 535 (not tested) [1.33]<br />
227 Cable reel trolley & quantity of electric<br />
cable part reels<br />
228 SHERATON small surface grinder with<br />
magnetic chuck,<br />
approximately 360 x 150 (not tested)<br />
[1.08]<br />
230 HAFCO bench drill, Model: SBD-20,<br />
S/N: 688-90 (not tested) [1.15]<br />
231 Fabricated metal workbench with<br />
undershelf & drill stand, approx 2000 x<br />
800<br />
232 Lockable 2 door 2 shelf cabinet in red<br />
metal, approx 2000 x 800 & quantity of<br />
consumables<br />
233 Romanian gap bed, Model: FB-CF 560 x<br />
3000, S/N:1905 3652, 3m<br />
between centers x 550mm overgap,<br />
290mm over bed, 105mm bore,<br />
YOM:1995 (not tested) [1.14]<br />
234 Bank of 4 x metal clothes lockers<br />
235 Fabricated heavy duty 4 tier shelving<br />
unit, approx 900 x 1340 x 500 deep with<br />
Gondola style 5 tier rack<br />
236 11 x Assorted metal checker plate steps<br />
to wall<br />
237 PIRTEK 55 litre spill control kit general<br />
purpose to bag<br />
238 4 x Light duty 5 tier shelving units approx<br />
1600 x 900<br />
239 3 x Assorted mobile welding screens<br />
240 Single cylinder bottle trolley with<br />
2400mm rolled steel section<br />
241 Pair of metal checker plate golf<br />
cart/machine ramps, each approx 2200<br />
x 380<br />
242 Pair motorcycle ramps each approx<br />
1800 x 80<br />
*GST is included in the hammer price of items indicated<br />
243 EPIC hydraulic press brake, 100T rating,<br />
approximately 3m, pulse<br />
guard & rev roth hydraulic pump with 8<br />
step programmable digital<br />
controlled 2 x blades, pedal operated<br />
(not tested) [1.03]<br />
244 PACIFIC power guillotine , auto back<br />
stop, auto guard, pedal<br />
operated with solid state digital back<br />
gauge controller, approximately<br />
3,100mm x 6mm (not tested) [1.01]<br />
245 HYCLASS pan brake, manual,<br />
approximately 2,400mm x 2mm (not<br />
tested) [1.02]<br />
246 SIP twin cylinder air compressor<br />
mounted on a 1.5m horizontal<br />
receiver [1.35]<br />
247 Quantity of sheet steel + galvanised to<br />
rack, assorted sizes & styles<br />
248 quantity of sheet aluminium & aluminium<br />
offcuts to rack<br />
249 Fabricated metal 20 bin vertical sheet<br />
rack, approx 2800w x 1200h x 1800 deep<br />
250 3 x Assorted fabricated sheet<br />
metalworkers bench<br />
251 JOHN HEINE 202A computer with<br />
corner notching die-set, inclinable<br />
power press, 17T capacity, series 2, no<br />
guarding (not tested) [1.06]<br />
252 Spot welder on mobile base (not tested)<br />
253 BALDING BEAVER universal turret mill<br />
UBPR 6334/2,<br />
approximately 1,450mm x 500mm table<br />
(not tested) [ 1.13]<br />
254 Polish vertical mill, Model:: 6M82, S/N::<br />
2934, approximately 1325 x<br />
320 table & universal head (not tested)<br />
[1.12]<br />
255 3 x Bays Gondola style shelving, each<br />
unit 3 tier approx 1500 x 1200<br />
255a<br />
HYCO table saw, plug cut. AS IS (Not in<br />
service)<br />
256 Unbranded 6" D/E grinder with linisher<br />
attachment and ABBOT & ASHBY<br />
double ended grinder on common stand,<br />
240v (not tested)<br />
257 CROWN double ended 8" grinder on<br />
stand, 240v (not tested)<br />
258 GMF double ended bench grinder on<br />
stand 240v (not tested)<br />
259 SAF electric welder, no gun to pallet<br />
260 HAFCO AL1000 centre bend lathe with 3<br />
& 4 jaw chucks, S/N: 4987 (not tested)<br />
261 4 x Rolls of rubber utility matting each<br />
roll10m x 1830mm wide with 3 roll<br />
merchandising rack<br />
Page 9 of 15
Lot GST* Lot<br />
GST *<br />
261a<br />
261b<br />
Hydraulic Porto pack kit to metal case<br />
VITAL 1T chain block to drum<br />
262 Manual pipe and tube bender [1.21]<br />
263 Custom fabricating inline axle fabricating<br />
jig [1.20]<br />
263a<br />
Section (horse float) rubber matting<br />
approx 2000 x 1100<br />
264 KONE overhead electric hoist (capacity<br />
not shown) with pendant control &<br />
grinder crawl (Not in service)<br />
265 Custom fabricated horizontal and vertical<br />
12T arbor press approximately 600mm<br />
throat Note: Tooling for 9, 10 & 12 inch<br />
mud guard forming and various U block<br />
tooling and pipe bending (not tested)<br />
[1.04]<br />
266 Custom fabricated hot saw with infeed<br />
and outfeed bench [1.24]<br />
267 Unbranded 6" powered pyramid pinch<br />
roll, approximately 4mm x 1.8m,<br />
assumed to do mild steel, with light<br />
beam guarding and inching (not tested)<br />
[1.25]<br />
268 Unbranded manual arbor press [1.26]<br />
269 2kg tub VALVOLINE Valplex EP grease<br />
270 Long RAM 3T double pump + bottle jack<br />
271 Fabricated metal frame workbench with<br />
timber bench top & understorage,<br />
approx 2400 x 600 deep with tool board<br />
+ 2 tier over storage<br />
272 Metric and imperial, brake line flaring<br />
tools [1.29]<br />
273 JBS pipe wrench 36", rigid no. 1 & 2 pipe<br />
cutter & 2 x bolt cutters<br />
274 Balance of hand tools to bench<br />
275 6 x Assorted F clamps<br />
276 2 x Fabricated oil tanks<br />
277 2 x CAMPBELL HAUSFELD wall<br />
mounted air hose reels<br />
278 Fiberglass roof mould for horse float 2m<br />
wide x 4.8m to suit triple horse angle<br />
load float with plug for mould, Note: plug<br />
located in yard<br />
278a<br />
278b<br />
278c<br />
Fiberglass roof mould for horse float<br />
1,650mm wide up to 4.2m long to suit<br />
single or double float with moulded roof<br />
Assorted chain lengths to 3 drums<br />
Twin bottle cylinder trolley<br />
279 ENMACH INDUSTRIES Poly RV<br />
Accessories poly tank, Model:<br />
PRV80S/DPRV-80S<br />
280 ENMACH INDUSTRIES Poly RV<br />
Accessories poly tank, Model:<br />
PRV80S/DPRV-80S<br />
*GST is included in the hammer price of items indicated<br />
281 ENMACH INDUSTRIES Poly RV<br />
Accessories poly tank, Model:<br />
PRV80S/DPRV-80S<br />
282 ENMACH INDUSTRIES Poly RV<br />
Accessories poly tank, Model:<br />
PRV80S/DPRV-80S<br />
283 ENMACH INDUSTRIES Poly RV<br />
Accessories poly tank, Model:<br />
PRV80S/DPRV-80S<br />
284 ENMACH INDUSTRIES Poly RV<br />
Accessories poly tank, Model:<br />
PRV80S/DPRV-80S<br />
284a<br />
DOMETIC caravan air conditioner<br />
rooftop compressor unit only in box,<br />
Model: B3200, S/N: 90901469, Product<br />
no: 991760895"<br />
285 1 x SUNRAYSIA 5 stud 16" land cruiser<br />
with 265 tyre fitted<br />
286 1 x ROGERS suspension type 16"<br />
(Bedford pattern) wheel, 14 ply radial<br />
tyre fitted<br />
287 4 x GT RADIAL tyres, 235 x 75R16<br />
288 4 x ADVANCE tyres 650-162L<br />
289 3 x S/H 6 stud land cruiser wheels and<br />
tyres<br />
290 2 x 6 stud land cruiser wheels each fitted<br />
with unused DUNLOP road gripper<br />
7.50R16<br />
291 6 x GT RADIAL Maxway 185 x 14LT<br />
radial<br />
292 4 x SUNRAYSIA FORD pattern wheels<br />
each fitted with GT RADIAL Maxway 185<br />
x 14LT radial<br />
293 4 x SUNRAYSIA FORD pattern wheels<br />
each fitted with GT RADIAL Maxway 185<br />
x 14LT radial<br />
294 4 x SUNRAYSIA FORD pattern wheels<br />
each fitted with GT RADIAL Maxway 185<br />
x 14LT radial<br />
295 4 x SUNRAYSIA FORD pattern wheels<br />
each fitted with GT RADIAL Maxway 185<br />
x 14LT radial<br />
296 1 x SUNRAYSIA FORD pattern wheel<br />
fitted with BRIDGESTONE R623<br />
185R14LT<br />
297 Leaf spring set 3T rock roller<br />
298 3 x Leaf spring set 4T rock roller<br />
299 4 x Leaf spring set 4T long arm<br />
300 2 x Leaf spring set 3T long arm<br />
301 2 x Leaf spring set 4T long arm<br />
302 1 x Leaf spring set 3T long arm<br />
303 1 x Leaf spring set 1148/9 2500kg<br />
304 1 x Leaf spring set 1151/12 1750kg<br />
305 1 x Leaf spring set 1002/7<br />
Page 10 of 15
Lot GST* Lot<br />
GST *<br />
306 3 x Leaf spring set 1007/9 tandem<br />
rocker 2500kg<br />
307 2 x Leaf spring set 1151/11 tandem<br />
rocker 1500kg<br />
308 BROWNBUILT pallet racking, 4 bays<br />
comprising 5 x approx. 5000mm<br />
uprights and 30 x approx. 2700mm<br />
cross beams<br />
309 47 x Leaf spring 9 leaf 33" (840) 1100kg<br />
per pair rating<br />
310 10 x Leaf spring 7L 8mm 840mm<br />
1634kg per pair rating<br />
311 5 x Leaf spring 33" (840) 7 leaf 922kg<br />
per pair rating<br />
312 25 x Leaf spring 30" (762) 7 leaf 1040kg<br />
per pair rating<br />
313 10 x Leaf spring 28"(710) 7 leaf spring<br />
1108kg per pair rating<br />
314 10 x Leaf spring 6L 8mm 840mm<br />
1400kg per pair rating<br />
315 12 x Leaf spring 33" 840 6 leaf 790kg<br />
per pair rating<br />
316 12 x Leaf spring 30" (762) 6 leaf spring<br />
890kg per pair rating<br />
317 8 x Leaf spring 28" (710) 6 leaf 948kg<br />
per pair rating<br />
318 18 x Leaf spring 24" (610) 6 leaf 1096kg<br />
per pair rating<br />
319 12 x Leaf spring 8mm 840mm 1166kg<br />
per pair rating<br />
320 23 x Leaf spring 30" (762) 4 leaf 592kg<br />
321 18 x Leaf spring 28" (710) 4 leaf 632kg<br />
322 16 x Leaf spring 24" (610) 4 leaf 730kg<br />
323 2 x Leaf spring 1140/10 IES<br />
324 2 x Braked IRS axle assembly 1430kg<br />
each 2060mm body = 2500 OA width on<br />
FORD 14" SUNRAYSIA<br />
325 IRS axle assembly suit 6' body 1450kg<br />
rated<br />
325a<br />
325b<br />
IRS axle assembly suit 4' body 1450kg<br />
rated<br />
IRS axle assembly suit 4' body HOLDEN<br />
bearings<br />
326 6 x Floodlights 240v to pallet<br />
327 Quantity of insulation batts to pallet<br />
328 Large quantity of used rims and tyres to<br />
floor, assorted sizes<br />
329 Custom built fabricated heavy duty<br />
racking comprising of 2 x 4.4m wide<br />
sections<br />
330 Unbranded paint mixing system, not in<br />
service<br />
*GST is included in the hammer price of items indicated<br />
331 Shelving unit, locker, pressure pot, paint,<br />
thinners to spray area<br />
332 BINKS BULLOWS fabricated spray<br />
booth with natural gas fired heating,<br />
approximately 6.9m x 3.8m internal<br />
sizing,Note: buyer must professionally<br />
make good building wall to front in<br />
matching colour/profile (not tested)<br />
333 2 x Pairs axle stands<br />
335 ENDURO Pump unit 240v<br />
336 Pair used braked tandem axle<br />
assemblies<br />
337 Box trailer tailgate 4' wide<br />
338 Custom built slew ring VO/N100<br />
339 16 Tier single sided axle rack<br />
339a<br />
Quantity of PVC tray gate work protector<br />
strips<br />
340 Freestanding double sided 10 tier axle<br />
rack with a quantity assorted trailer axles<br />
341 Freestanding double sided 10 tier axle<br />
rack with a quantity assorted trailer axles<br />
342 2 Bays IAMSON FOX wall mounted bin<br />
storage units with large quantity nuts,<br />
bolts etc<br />
343b<br />
3 Tier metal bench and wire strapping<br />
tool, and clear film pallet wrap dispenser<br />
344 Quantity of suspension including 3 x 6<br />
leaf 1000kg and 1 x 6mm 4 leaf 500kg<br />
344 Approx. 22 x railer lighting adaptor cords<br />
344a<br />
SECURA PVC carton strapper 240v<br />
345 6 x 7 leaf tandem suspension<br />
346 7 x 9 leaf slipper spring<br />
347 25 x 7 leaf slipper spring<br />
347a<br />
16 x 6 leaf slipper spring<br />
348 51 x 5 leaf slipper spring<br />
349 24 x 4 leaf slipper springs<br />
350 17 x Assorted slipper springs<br />
351 7 x Assorted 9 leaf slipper springs,<br />
2100kg and 1186kg<br />
352 74 x Assorted 3 leaf and 2 leaf slipper<br />
spring<br />
352a<br />
38 x Assorted 4 leaf and 5 leaf slipper<br />
springs<br />
353 Allowance for wheel covers, galvanized<br />
steel runs and parts to top shelf<br />
354 11 x Assorted MWI TOYOTA 4 stud lazy<br />
hug and 6" black hubs<br />
355 31 x HQ 5 stud lazy hub<br />
356 Allowance for hub assembly and 4 x 5<br />
stud hubs<br />
357 16 x HT 5 stud lazy hub and 6 stud<br />
Page 11 of 15
Lot GST* Lot<br />
GST *<br />
358 11 x 5 stud lazy hub<br />
359 Quantity of assorted brake pad housing<br />
360 19 x HQ 9" hub drum<br />
361 Allowance for 9 x PARK hydraulic<br />
assembly and 8 x HT 9" hub drum<br />
362 20 x FORD 9" hub drum<br />
363 19 x 9" hub drum, 6 stud<br />
364 Allowance for 4 x HQ disk hub, 1 x HT<br />
disk hub, 9 x FORD disk hub<br />
366 12 x HQ 10" electric drum<br />
367 5 x FORD 10" electric drum<br />
368 Allowance for parallel BRGS 4 x 5 stud,<br />
4 x 6 stud and 7 x HT 10" electrical drum<br />
369 5 x HT 10" electric drum<br />
370 5 x L/C 10" 6 stud electric drum<br />
371 7 x Assorted small tyres<br />
372 Assorted trailer brake levers, 17 x large,<br />
13 x small<br />
373 31 x Assorted couplings<br />
374 Quantity of SELECTLOK and STATILUS<br />
gas struts<br />
375 Quantity of locking slide railings<br />
376 Allowance for 3 x heavy duty tow rings<br />
and prefabricated plates<br />
377 Allowance for air hose, assorted<br />
componentry and prefabricated plates<br />
378 Allowance for 6 stud alloys and drum<br />
brake components<br />
379 Allowance for assorted blocks, pins and<br />
bolts<br />
380 Allowance for assorted hanger and<br />
rocker components<br />
381 Reel of steel wire rope<br />
382 Allowance for items to shelf including<br />
locks, latches, plastic caps and<br />
prefabricated plates<br />
383 12 section metal shelf including large<br />
quantity of U bolts, nuts and brackets<br />
384 Allowance for items to shelf including<br />
seals, bearings, pin & nut sets, nuts,<br />
bolts and shackle pins<br />
385 Assorted stub axles to tubs<br />
386 14 x Assorted 3, 4 and 5 tier metal<br />
shelving<br />
387 Bag of 300 x U bolts<br />
388 SIMOL, MANUTEC & FULTON trailer<br />
jacks<br />
389 4 x MANUTEC ASSW-LN 750kg trailer<br />
stand<br />
390 7 x MANUTEC AS14 650kg 14" trailer<br />
leg<br />
*GST is included in the hammer price of items indicated<br />
391 3 x MANUTEC AS20 650kg trailer leg<br />
392 4 x MANUTEC ASSW 1.4m 1000kg<br />
trailer leg<br />
393 7 x MANUTEC ASSW-M 1000kg trailer<br />
stand<br />
394 6 x MANUTEC ASSW-MLH 1000kg<br />
trailer stand<br />
395 COMPOUND SOLUTIONS DS501S<br />
6000kg side wind drop leg<br />
396 COMPOUND SOLUTIONS K450<br />
4500kg side wind drop leg<br />
397 Allowance for assorted jockey wheel<br />
components and swivel brackets<br />
398 Allowance for wheel holders, handles, 8"<br />
rubber wheels etc<br />
399 3 x AERO trailer leg<br />
400 MANUTEC JSWS-10LBAD 1000kg<br />
jockey wheel<br />
401 2 x MANUTEC JW47UB 700kg jockey<br />
wheel<br />
402 MANUTEC JW8 1250kg jockey wheel<br />
403 MANUTEC 205kg jockey wheel<br />
405 Quantity of weld on swivel plates, to suit<br />
legs and jockey wheels<br />
406 MANUTEC 1000kg & 700kg hand<br />
winches<br />
407 ROCK REW 2200 electric winch,<br />
1000kg max pull capacity<br />
408 8 x ANCRA 2500kg strapping and<br />
quantity of winches<br />
409 Assorted black and chrome locks<br />
410 Quantity of lashing rings and lock collars<br />
411 Allowance for shelf of springs, lever<br />
assembly vents, etc<br />
412 Allowance for shelf of heavy duty spring<br />
bolts (20mm & 60mm), heavy, medium<br />
& light duty over centre catches,<br />
coupling guards etc<br />
413 Allowance for shelf of anti-loose<br />
threaded weld on hinges and deep<br />
shackles<br />
414 Allowance for shelf of hinges, hasp &<br />
staples, tow ball overs and tow balls<br />
415 4 x ARTWOOD 2" ball trailer hitch,<br />
5000lbs capacity<br />
416 Pull out truck step unit<br />
417 5 x Pairs of assorted brake shoes and 3<br />
x pairs of disc brake pads<br />
418 76mm 15T ring weld on<br />
419 76mm 6T ring bolt on<br />
420 76mm 9T ring bolt on swivel<br />
421 3" Gooseneck coupling, approx. 10T<br />
Page 12 of 15
Lot GST* Lot<br />
GST *<br />
422 Swivel pintle hook, approx.. 10T<br />
423 40mm15T swivel eye weld on<br />
424 76mm 2T override ring coupling<br />
425 127mm BARTLETT BALL, approx. 30T<br />
426 95mm BARTLETT BALL, approx. 9T<br />
427 40T Pintle hook CW air chamber<br />
428 3 x Pintle hook and ball combination<br />
428a<br />
Spare wheel mount weld on<br />
429 BARTLETT BT1200h pintle hook tow<br />
bar up to 7T capacity<br />
430 HAYMAN REESE R1200-100 tow bar<br />
multi truck fit 2T capacity<br />
431 RJ30 30L PVC water tank under tray<br />
fitting, multi fit left or right with tap and<br />
soap<br />
432 RJ30 30L PVC water tank under tray<br />
fitting, multi fit left or right with tap and<br />
soap<br />
433 RJ30 30L PVC water tank under tray<br />
fitting, multi fit left or right with tap and<br />
soap<br />
434 Fabricated metal tool box under tray,<br />
Model: RHR<br />
435 Contents of 4 shelves including shackle<br />
kits, hand clean, mud flaps, battery<br />
carrier etc<br />
436 IRONMAN single swag, RRP$345<br />
437 Contents of 4 shelves including assorted<br />
globe type tail light kits<br />
438 HANSA Nite Stalker 100w driving lights<br />
439 Contents of two shelves including<br />
quantity of globe type light fittings<br />
440 Quantity of assorted LED tail lights to<br />
shelf<br />
441 Quantity of reflectors to shelf<br />
442 Pair of NARVA Ultima 225 driving lights<br />
443 Pair of NARVA Extreme driving lights<br />
444 Quantity of BRITAX and other trailer<br />
adaptors to shelf<br />
445 3 x Reverse camera kits and quantity of<br />
globes to 2 shelves<br />
446 Quantity of LED trailer light kits to wall<br />
447 RV PVC under body toolbox, multi fit left<br />
or right<br />
448 RV PVC under body toolbox, RHR or<br />
LHF<br />
449 RV Merchandising rack 4 tier<br />
450 Quantity of assorted AP LED strip<br />
lighting, white/red/green/multi<br />
451 Quantity of RBRITAX adaptors/fittings to<br />
wall<br />
*GST is included in the hammer price of items indicated<br />
452 11 x AP AP47AR-TP 12/24v LED trailer<br />
light sight, RRP $89 set<br />
453 3 x Truck double boss winches with 11m<br />
straps and 4 x truck mounting tracks,<br />
each approx. 2.4m<br />
454 Part roll black vinyl stretch upholstery<br />
material<br />
454a<br />
454b<br />
10 x BLAKWOODS adjustable 4 tier<br />
shelving bay 1800 x 900<br />
SAM45 ER-180 cash register (not<br />
tested) [1.97]<br />
455 Computer with AMD 2 processor<br />
2.90GHZ, 4GB RAM & 968GB HDD &<br />
24" ASUS monitor (not tested) [1.113]<br />
456 Computer with AMD 2 processor<br />
2.90GHZ, 4GB RAM & 968GB HDD &<br />
24" ASUS monitor (not tested)[1.113]<br />
457 Computer with AMD 2 processor<br />
2.90GHZ, 4GB RAM & 968GB HDD &<br />
24" ASUS monitor (not tested)[1.113]<br />
458 Computer with AMD 2 processor<br />
2.90GHZ, 4GB RAM & 968GB HDD &<br />
24" ASUS monitor (not tested) [1.113]<br />
459 CANON LBP 7200CDN printer (not<br />
tested) [1.101]<br />
460 CANON LBP 7200CDN printer (not<br />
tested) [1.101]<br />
461 CANON Pixma IP4200 printer (not<br />
tested) [1.99]<br />
462 Allowance for 3 x assorted printers (not<br />
tested)<br />
463 BROTHER MCF 440CN printer (not<br />
tested) [1.104]<br />
464 LG Aria 24ip phone system and 7 x LG<br />
Nortel Telstra LDP7008D handsets (not<br />
tested) [1.94]<br />
465 CANON IR1600 copier (not tested)<br />
466 Allowance for 4 x stools black frame and<br />
4 x office chairs<br />
467 2 x White laminated desks and 1 x white<br />
laminated shelf<br />
468 Allowance for NAMCO stationery cabinet<br />
and 3 & 4 drawer ELITE BUILT filing<br />
cabinets<br />
500 4 x Large doors and quantity of steel<br />
channel and OREGON timber posts<br />
501 PERKINS diesel engine fitted to large<br />
blower fan (not tested)<br />
502 Quantity of pallet racking disassembled<br />
503 3 x Steel roof trusses, heavy dual wheel<br />
differential<br />
504 Spray booth fan and ducting (not tested)<br />
505 Steel workbench approx. 2.4m x 2.4m<br />
Page 13 of 15
Lot GST* Lot<br />
GST *<br />
506 Quantity of horse float jigs and bow<br />
rolling dies<br />
507 Horse float bow rolling jig<br />
508 3 x Stillage bins<br />
509 2 x Aluminium ramps<br />
510 Pallet of steel plate<br />
511 Rotating tray body welding jig<br />
512 Rotating tray body welding jig<br />
513 Quantity of truck chassis and tail shafts<br />
514 Large workbench 3m x 1.5m steel<br />
515 Hydraulic roll former<br />
516 4 x Trailer fabricating jig benches<br />
517 Basket of compressor bell end caps<br />
518 2m x 1.2m Storage bin, 1.4m deep<br />
519 2 x Mesh storage bins<br />
520 2.4m x 1.2m x 1.4m Storage bin<br />
521 Genuine DEXTER wheels to suit<br />
American imported axles with tyres<br />
522 Basket of 16" split rims 5 with tyres and<br />
2 x 15" FORD wheels and tyres<br />
523 Basket of mixed steel wheels<br />
524 Large basket of 16" 6 stud mixed<br />
Landcruiser wheels, approx. 60<br />
525 MORRIS MINI wheel and tyre<br />
526 Mesh storage bin, 2m x 1.2m x 1.5m<br />
527 11 Drums of second hand trailer parts<br />
(most rare hard to find new)<br />
528 New tray fits ISUZU D Max/HOLDEN<br />
Colorado current 2013 model, extra cab<br />
power coated white<br />
529 Single cab alloy tray (Used)<br />
530 Alloy tray/fit NISSAN Patrol (Used)<br />
531 Saw bench<br />
532 Steel tray to fit Hilux extra cab, second<br />
hand, white<br />
533 Ute tub for Hilux dual cab<br />
534 Enclosed canopy body fits old model<br />
BT50 FORD Ranger dual cab/white<br />
second hand<br />
535 HOLDEN Colorado ute tub dual cab<br />
current model, white<br />
536 NISSAN Navarra ute tub dual cab D40<br />
model, white<br />
537 Triton ute tub, dual cab, white<br />
538 VW Amarok ute tub, dual cab, white with<br />
ute liner<br />
539 TOYOTA Hilux ute tub, dual cab, SR<br />
model, white<br />
540 Triton ute tub dual cab, grey with alloy<br />
bar<br />
541 Hilux ute tub dual cab, SR model, white<br />
542 2 x Farm <strong>trailers</strong><br />
543 MAZDA BT-50 ute tub, extra cab, fits<br />
current model, grey<br />
544 Triton ute tub dual cab, grey<br />
545 Boat trailer<br />
546 6 x 4 Box trailer, second hand, green<br />
1201 NISSAN KAH01A15V, forklift Chassis<br />
no: KAH01-900493, 2.7T, 3,300mm<br />
height, 1,122kg SWL, dual fuel, solid<br />
tyre, container mast, lights, hour meter<br />
reads: 3,976hrs [2.08]<br />
1202 12/86 MITSUBISHI forklift, Model: FG-<br />
151, 990kg capacity, type F25-54103,<br />
4.8m lift container mast, side shift,<br />
pneumatic tyres 80% tread remaining,<br />
dual fuel, headlights, indicators, no<br />
seatbelt, (Conditional registration not<br />
transferable) [2.06]<br />
1203 CATERPILLAR ride on petrol forklift,<br />
Model: V80D, S/N: 40101652, rated<br />
3,330kg, lift 3,750mm with side shift,<br />
bogie front wheel, not WH&S compliant,<br />
with slippers to front forks [2.07]<br />
1205 07/90 HOLDEN Rodeo DLX2000 ute,<br />
manual transmission, 2.6L petrol, red<br />
duco, brown vinyl upholstery, air<br />
conditioning, power steering, poor<br />
condition, VIN: JAATFR17HL7105314,<br />
odometer reads: 252,850kms, rego no:<br />
BL04NP valid until 24/08/13 [2.04]<br />
1206 09/06 TOYOTA Hilux 3.0D4D 4x4 dual<br />
cab ute, manual transmission, 3L diesel,<br />
cerise duco, grey upholstery, air<br />
conditioning, power steering, electric<br />
windows, tool boxes, running boards,<br />
bull bar, roll bar, tow bar, stone chips,<br />
minor dents to driver's side, VIN:<br />
MROFZ29G101538861, odometer<br />
reads: 188,908kms, rego no: MAT889<br />
valid until 17/10/13 [2.01]<br />
1206a<br />
1978 MGB 1800cc convertible, black<br />
duco, VIN No: GHN5462181G, Rego<br />
No: NMG78B valid to 02/2014<br />
1207 12/07 FUSO Fighter FK600 truck,<br />
manual transmission, 7.2L diesel, white<br />
duco, grey upholstery, GVM 10,400kg,<br />
air conditioning, power steering, electric<br />
windows, 6m checker plate tray, tool<br />
boxes, 80L water tank, VIN:<br />
TLFFK617KOKK01105, odometer<br />
reads: 120,667kms, rego no: AW35DR<br />
valid until 10/07/13 [2.05]<br />
*GST is included in the hammer price of items indicated<br />
Page 14 of 15
Lot GST* Lot<br />
GST *<br />
1208 03/94 MITSUBISHI Canter, manual<br />
transmission, diesel, white duco, grey<br />
upholstery, GVM 4,495kg, air<br />
conditioning, power steering, checker<br />
plate tray, VIN: 6F6E4067DRTO60802,<br />
odometer reads: 160,338kms, rego no:<br />
AC12DF (expired) [2.02]<br />
1209 G & C MANUFACTURING twin axle<br />
car/trailer carrying trailer, Model:<br />
DC7971, approximately 8m x 2.4m, 2.9T<br />
GVM with brake away unit, dual axle,<br />
VIN: 6B9127000V2CN8114, DOM:<br />
07/97, rego no: K-74759 valid until<br />
13/07/13 [1.49]<br />
1209a<br />
Double sided fabricated A frame<br />
attachment, approx. 7.5 x 3.5m high<br />
(suits lot 1209)<br />
1210 Unbranded double horse float twin axle,<br />
incomplete. AS IS. No rego, sand<br />
blasted and primed, no floor, no roof<br />
1210a<br />
1210b<br />
Unbranded double horse float twin axle,<br />
painted white. AS IS. Previously<br />
registered E86086<br />
KARA KAR double horse float twin axle.<br />
AS IS. Damaged to rear<br />
1211 Car trailer dual axle 12' x 6'6" with<br />
electric brakes, manual winch, 2T GVM,<br />
rego B21692 valid until 20/07/13<br />
1212 Car trailer dual axle 12' x 6'6" with<br />
electric brakes, manual winch, 2T GVM,<br />
rego C75453 valid until 06/06/13<br />
1213 07/11 Dual axle 13x6'6 car trailer,<br />
manual winch, electric brakes, rego no:<br />
AW8995 valid until 26/06/13 [3.02]<br />
1214 G & C MANUFACTURING horse float,<br />
Model: GC4972, DOM: 04/97, electric<br />
brakes, dual axle double float, VIN:<br />
6B9T2700GV2CN8064, rego no:<br />
K62400 valid until 12/05/13 [3.12]<br />
1215 G & C MANUFACTURIING Double<br />
series 85 float, dual axle, electric brakes,<br />
Rego no: G48917 valid until 08/10/13<br />
[3.13]<br />
1216 G & C MANUFACTURIING Double<br />
series 85 float, dual axle, electric brakes,<br />
Rego no: D21211 valid until 27/03/13<br />
[3.13]<br />
1217 PANTECH 11x7 trailer, body mounted<br />
on floating body, electric brakes, barn<br />
doors, Rego no: G29455 valid until<br />
23/05/13 [3.09]<br />
1218 Dual axle 10x6 box trailer with 4' cage,<br />
hydraulic brakes, GVM: 2000kg, Rego:<br />
BB7142 valid until 01/06/13 [3.15]<br />
1219 Enclosed single axle trailer, Model:<br />
GC8975, 9x5'8 wide, 4'6 high, VIN:<br />
6139127000V2CN8146, rego no:<br />
K80816 valid until 18/08/13 [3.10]<br />
*GST is included in the hammer price of items indicated<br />
1220 Golf cart trailer, 5x10, Model: CVT043,<br />
new ramp, VIN: 6T9T27R1270J72002,<br />
rego no: C86787 valid until 08/08/13<br />
[3.07]<br />
1221 Dual axle 8x5 trailer, Model: BOX04N,<br />
hydraulic override brake cage, 2T GVM,<br />
VIN: 6T9T20R04AOJY2007, rego no:<br />
W22386 valid until 29/04/13[3.04]<br />
1222 8 x 5 Box trailer, Rego: CH6695 valid<br />
until 20/08/13 [3.16]<br />
1223 Motorbike trailer, 7x5.8, Rego: BQ-6091<br />
valid until 31/03/13 [3.05]<br />
1224 Box trailer, 7x4, Rego: G-68150 valid<br />
until 10/01/14 [3.06]<br />
1225 Live<strong>stock</strong> trailer, 8x5 with 4' walls, dual<br />
axle, Rego no: B21735 valid until<br />
30/08/13 [3.14]<br />
1226 G & C MANUFACTURIING new box<br />
trailer, approx. 6'x4', Model: Box 04, VIN:<br />
6T9T20R01DODR6007, DOM: 01/13,<br />
750kg capacity, painted green, not<br />
registered<br />
1227 Fabricated single axle work dolly,<br />
approx. 4000 x 1100<br />
1228 Box trailer, 5x8, Rego no: J83159 valid<br />
until 24/10/13 [3.08]<br />
1229 Enclosed single axle trailer, 7x4x4, Rego<br />
no: S25025 valid until 06/05/13 [3.11]<br />
1230 Trailer canopy frame, approx. 7'x4' [4.10]<br />
1231 WELDMESH trailer cage kit 4' high,<br />
approx. 7'x4'6"<br />
1232 WELDMESH trailer cage kit 4' high,<br />
approx. 6'x4'<br />
1233 WELDMESH trailer cage kit 4' high,<br />
approx. 6'x4'<br />
Page 15 of 15