Linear actuator with linear recirculating ball bearing and guideway ...
Linear actuator with linear recirculating ball bearing and guideway ...
Linear actuator with linear recirculating ball bearing and guideway ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Индастриал Технолоджис www.ind-techno.com.ua +38 044 498 21 94<br />
Maintenance<br />
Relubrication of carriages<br />
Funnel type lubrication nipples<br />
Funnel type lubrication nipple<br />
Figure 6<br />
Funnel type lubrication nipples<br />
Warning<br />
Relubrication of carriages<br />
The carriage is relubricated via funnel type lubrication nipples to<br />
DIN 3 405-A-M6. These are located on the longitudinal sides of the<br />
carriage.<br />
The lubrication connector can also be replaced in order to allow<br />
connection to a central lubrication system.<br />
000137B2<br />
1<br />
Relubrication can be carried out from either the left or right side of<br />
the carriage.<br />
Sudden start of the machine.<br />
Crushing of fingers between the carriage <strong>and</strong> machine parts.<br />
❑ Before starting work, disconnect the machine from the power<br />
supply.<br />
❑ Secure the main switch of the machine against switching on.<br />
✓ <strong>Linear</strong> <strong>actuator</strong> warm from operation.<br />
✓ Funnel type nipples clean <strong>and</strong> accessible.<br />
❑ Pump the required lubricant quantity into one of the funnel type<br />
lubrication nipples.<br />
❑ If possible, move the carriage by h<strong>and</strong> during lubrication in order<br />
to distribute the grease evenly.<br />
1<br />
Industrial Technologies<br />
20 MON 70 Schaeffler Group Industrial
Change language