Radial Insert Ball Bearings and Housing Units - Industrial ...

More documents

Recommendations

Info

Product overview Housing units Plummer block housing units Flake graphite cast iron housings with long base UCP 0001816B Two-bolt flanged housing units Flake graphite cast iron housings UCFL 00018169 Four-bolt flanged housing units Flake graphite cast iron housings UCF 00018167 18 TPI 219 Schaeffler Technologies INDUSTRIAL TECHNOLOGIES +38 044 4982194 www.ind-techno.com.ua
Housing units Features Housing units with flake graphite cast iron housing Plummer block housing units These housing units are available as plummer block and flanged housing units. The units are ready-to-fit and comprise FAG flake graphite cast iron housings in which FAG radial insert ball bearings are fitted. In order to ensure function and reliability under all operating conditions, the bearings and housings are matched to each other. Due to the spherical outer ring of the bearing and the concave housing bore, housing units can compensate for static misalignments of the shaft, see page 21. The housings are screw mounted on the adjacent construction. Less stringent tolerances are sufficient for the screw mounting surfaces, see page 21. The flake graphite cast iron housings are single piece components in accordance with JIS B 1559 and have high radial and axial load carrying capacity, see page 21. The housing has a lubrication groove for relubrication of the radial insert ball bearing. The housing is supplied with a lubrication nipple M6 with a protective cover. Cast iron units are available as plummer block and flanged housing units. The housings have a primer paint coating as anti-corrosion protection of colour RAL9005 (black). Plummer block housing units have a housing with a long base and are screw mounted to the adjacent construction through slot holes, Figure 1. 0001817A UCP Figure 1 Plummer block housing unit, flake graphite cast iron housing, with long base Schaeffler Technologies TPI 219 19 INDUSTRIAL TECHNOLOGIES +38 044 4982194 www.ind-techno.com.ua
Page 1 and 2: Radial Insert Ball Bearings and Hou
Page 3 and 4: Foreword FAG Black Series Radial in
Page 5 and 6: Contents Page Radial insert ball be
Page 7 and 8: Radial insert ball bearings Page Pr
Page 9 and 10: Radial insert ball bearings Feature
Page 11 and 12: Design and safety guidelines Compen
Page 13 and 14: Shaft tolerances for radial insert
Page 15 and 16: Radial internal clearance continued
Page 17 and 18: Schaeffler Technologies TPI 219 15
Page 19: Housing units Page Product overview
Page 23 and 24: Design and safety guidelines Compen
Page 25 and 26: Fitting of plummer block and flange
Page 27 and 28: Accuracy Dimensional tolerances The
Page 29 and 30: 0001819F UCP A A 1 H 1 H 2 N N 1 B
Page 31 and 32: 000181A4 UCFL A A 1 N B U Q dyn. C
Page 33 and 34: 000181A1 UCF A A 1 N B U Q dyn. C r
Page 35: MATNR 036926418-0000 / TPI 219 / GB

Radial Insert Ball Bearings and Housing Units - Industrial ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?