Fuzzy RS690T - Orbit Micro
Fuzzy RS690T - Orbit Micro
Fuzzy RS690T - Orbit Micro
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MS-9804 Mainboard<br />
Jumpers<br />
COM Port Power Jumpers: J1, J2<br />
These jumpers specify the operation voltage of the onboard serial ports.<br />
J2<br />
J1<br />
1<br />
1<br />
+12V +5V<br />
1<br />
Clear CMOS Jumper: JBAT1<br />
There is a CMOS RAM onboard that has a power supply from external battery to keep<br />
the data of system configuration. With the CMOS RAM, the system can automatically<br />
boot OS every time it is turned on. If you want to clear the system configuration, set<br />
this jumper to clear data.<br />
1<br />
1<br />
1<br />
JBAT1<br />
3<br />
Keep Data<br />
3<br />
Clear Data<br />
Important<br />
You can clear CMOS by shorting 2-3 pin while the system is off. Then return<br />
to 1-2 pin position. Avoid clearing the CMOS while the system is on; it will<br />
damage the mainboard.<br />
LVDS Power Selection Jumper: J3<br />
Use this jumper to specify the operation voltage of the LVDS interfaced flat panel.<br />
J3<br />
1<br />
1<br />
1<br />
+3V +5V<br />
2-16
Change language