Download recordsheet RX-28 - OSBORN International GmbH

Wheel brushes
Areas of use
Wheel brushes are used for
various surface treatments such as
rust-removal, de-burring, honing,
welding, buffing, cleaning, rough
polishing, etc. The brushes are
suitable for both stationary and
hand machines.
Front view
Qualities
Wheel brushes provide high productivity
and flexibility at low cost.
The brush material and size are
adapted to both machine and
intended use.
• Brazil
• China
• Denmark
• France
• Germany
• Great Britain
• Mexico
• Portugal
• Romania
• Spain
• Sweden
• United States of America
Top view
Side views
Edge
Honing
Machine
RX-28
OSBORN INTERNATIONAL AB
P.O. Box 244
561 23 Huskvarna, Sweden
Tel: +46 36 - 38 92 00
Fax: +46 36 - 13 31 90
E-mail: info@osborn.se
Internet:www@osborn.se
A Unit of Jason Incorporated

Edge honing machine RX-28
1. Side alignment
brush adjusters.
Technical data
Technical description
The machine is designed for edge honing, polishing or de-burring
of indexable inserts and other parts of different forms. Radii of
hard metal indexable cutting tools can be controlled very
accurately. A rotary table that contains 28 spindles is housed
inside the machine. One part is manually placed on top of each
spindle. The actual machining is done by three brushes as the
rotary table and the spindles themselves are rotating. Several
types of abrasives can be used in brushes.
Brushes can be adjusted in height and sideways.
Automatic brush height compensation for brush wear.
Individual spindle drive units at each brush station make it
possible to use different settings for spindle rotating speed and
direction. All brushing stations are guided in ball and groove
precision guides. Safety is guaranteed as the machine is totally
enclosed.
The machine is controlled by an electronic control system and
uses an operator’s panel as HMI (Human Machine Interface).
Easy maintenance with access through hatches.
2. Operator’s
panel.
3. Easily
accessible
for service.
4. Direct driven
ballscrews in
Z linear axes. 3.
1
3
2
4
2.
Number of spindles
Number of brushes
Cooling liquid
Brush motors
Rotary table motor
Height adjustment
Horizontal adjustment
Spindle rotary drive
HMI
Control system
Table rotation speed
Loading/unloading
Machine weight
Part max size
Dimensions LxWxH
28 pcs
3 pcs
Cutting oil or oil emulsion
4 kW, frequency controlled
Servo motor
AC motor
By hand wheel
AC motors, frequency controlled
Operators panel
Electronic PLC system with
enclosed cabinet
Up to 2000 spindles per hour
Manual by operator
About 1800 kg
45 mm
1900 x 1500 x 2000 mm