Pipeline Valve - Pinhol
Pipeline Valve - Pinhol
Pipeline Valve - Pinhol
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Series BS Trunnion Mounted Ball <strong>Valve</strong><br />
NEWAY series BS ball valves are trunnion mounted<br />
supported and available in size 2 to 48 , ANSI class<br />
0<br />
rating 150 to 1500 and temperature ratings of - 46 C to<br />
0<br />
200 C . All meets the fire safe requirement of BS 6755<br />
and API 6FA.<br />
Fully forged steel body and closure eliminates the<br />
inevitable defects of casting and assures the tough<br />
structure of the valve at full rated working pressure. It<br />
also has advantage of quick delivery time, thus more<br />
popular in modern oil and gas industry.<br />
All BS series ball valves are featured with trunnion<br />
mounted ball and independent floating spring loaded<br />
seats which provides bubble-tight shut off and low<br />
operating torques even at low different pressure. Double<br />
sealing O-rings or a combination of an O-ring and gasket<br />
in stem making this series of ball valve suitable for both<br />
above ground or under-ground service.<br />
Double Sealing O-rings<br />
Prevent leakage from stem area<br />
O-ring & Gasket Combination<br />
Prevent leakage from body joint area<br />
Emergency Sealant Injection Fitting<br />
prevent leakage from the stem<br />
Blow-out Proof Stem<br />
Internally inserted and<br />
functioned as the backseat<br />
for assured stem sealing at<br />
all pressures<br />
Emergency Sealant<br />
Injection Fitting prevent<br />
leakage from the seat<br />
Floating Spring Loaded Seats<br />
to assure sealing<br />
even at low pressures<br />
Metal-to-Metal Sealing<br />
When non-meatl sealing is deteriorated<br />
by fire,seat floats to shut off the line fluid<br />
This is a typical NEWAY series BS trunnion mounted ball valve illustrated cross-section drawing which is only for demonstrating of basic<br />
design features. The actual product design may be slightly different from this sample drawing due to its size and pressure class.<br />
12 13