SIJECT...
SIJECT...
SIJECT...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>SIJECT</strong> IM<br />
(Open Loop) (Closed Loop)<br />
Automation and Drives<br />
<strong>SIJECT</strong> 16<br />
<strong>SIJECT</strong> 16i CS<br />
CI16i ...<br />
• CI16i / CI16iP<br />
• CI16i / CI 16iP<br />
Extension<br />
OP‘s<br />
Software<br />
Appendix<br />
<strong>SIJECT</strong> IM (Open Loop) <strong>SIJECT</strong> IM (Closed Loop) 2.0<br />
Automatic Easy PLC-Recovery (MMC-Card) x x Automatic Easy PLC-Recovery (MMC-Card)<br />
Unterstützung der neuen Steuerung<br />
<strong>SIJECT</strong> CI16iP.<br />
x x<br />
x<br />
x<br />
CI16iP supported.<br />
New machinetypeconceptallowedsametypeof programfor<br />
different machines different Types of Injection Molding<br />
Machines<br />
Quality data table. New concept, 16 rows with 200 data per<br />
field. (64 free selectable data, with free cycle step selecting).<br />
x Mold gate control 16x.<br />
x Hydraulic actions. Upgrade from 32 pre-prepared actions to 48.<br />
x<br />
Automatic clamp force adjustment for toggle system machines.<br />
Clamp force sensor required<br />
x Mold height position sensor for toggle system machines.<br />
Mold Closing profile- 3 x x x Mold Closing profile- 3 x<br />
Mold Open Profile- 3x x x Mold Open Profile- 3x<br />
Ejector- Forward 2x x x Ejector- Forward 2x<br />
Ejector- Back 2x x x Ejector- Back 2x<br />
Injection process step number limitation 6x. x x Injection process step number limitation 6x.<br />
Holding pressure step number limitation 5x. x x Holding pressure step number limitation 5x.<br />
Dosing step number limitation 3x. x x Dosing step number limitation 3x.<br />
Decompression x x Decompression<br />
x New Standard S7-Temperature control FB58 used.<br />
x New temperature alarm concept.<br />
<strong>SIJECT</strong> CI 16i / CI 16iP IM Application<br />
39