Sale Catalogue - Pro Auction

Bakery & Food Processing 

Machinery Equipment 

offered to sell by tender 

centrally located at the former 

Global Cake, 

Carnaby Site, Bridlington 

Tender closes: 

Friday 19th December 2008 

at 5.00pm 

Viewing is strictly by arrangement 

with the auctioneers. 

All images of the equipment 

to be sold are displayed on the 

Bidspotter website; further details 

provided upon request. 

Printed catalogue provided on request, call / fax: 

United Kingdom +0044 1761 414000 

USA +001 914 462 3598 

Hong Kong +00 852 3017 3619 

France +0033 177 725 928 

Tender registration and bidding: 

at www.bidspotter.com 

www.proauction.ltd.uk 

Email: info@proauction.ltd.uk Facsimile: 0845 280 2492

GENERAL CONDITIONS OF SALE 

(as approved by The Royal Institution of Chartered Surveyors) 

1 Application of these General itions 

1.1 In these general conditions the expression “the 

Auctioneer” includes his employees and agents and any 

person to whom conduct of the Auction is delegated under 

clause 5.11 below. 

1.2 These General Conditions apply to every Auction of 

Plant and Machinery, Chattels, Trade Stocks and Vehicles 

conducted by the Auctioneer and to any Lot offered for 

sale in the Auction whether that Lot includes property fixed 

to land or not fixed to land or any other personal property. 

1.3 If these General Conditions have not previously been 

accepted by a person attending or bidding at an Auction, 

bidding for any Lot in the Auction shall be deemed to be 

an acceptance by the Bidder of these General Conditions. 

1.4 To the extent that these General Conditions are 

inconsistent with any special conditions set out or referred 

to in the Auction Catalogue or announced at the Auction, 

the special conditions shall prevail. 

1.5 These General Conditions shall be governed 

construed and enforced in accordance with the law of 

England, but:- 

(a) if the Auction is held in Scotland, in accordance with 

the law of Scotland; 

(b) if the Auction is held in Northern Ireland, in 

accordance with the law in Northern Ireland. 

2. The Seller’s Instructions and Warranties 

2.1 The Seller warrants that:-( 

a) to any Lot offered for sale he will be able to pass good 

and unencumbered title free from third party claims; 

(b) any Lot offered for sale may lawfully sold; 

(c) the premises where the Auction is to be held (if not 

the Auctioneer’s premises) will be safe for that purpose 

and that it will be lawful to hold the Auction there. 

2.2 If the Seller’s instructions are given by the Seller’s 

agent, the Seller’s agent warrants that he has the Seller’s 

authority:- 

(a) to instruct the Auctioneer; 

(b) to give the warranties set out in clause 2.1 above; 

(c) to instruct the Auctioneer to act in accordance with 

these General Conditions and any special conditions. 

3. The Auctioneer’s Remuneration 

3.1 The Auctioneer’s remuneration shall be such as has 

been agreed between the Seller and the Auctioneer. 

3.2 The Auctioneer may deduct his remuneration from 

monies received from Buyers before accounting to the 

Seller for the balance. 

4. Bidding on behalf of Another 

4.1 Unless the Auctioneer has previously acknowledged 

in writing that the bidder bids as agent on behalf of a 

named principal, every bidder shall be taken to bid on his 

own behalf as principal. 

4.2 If the Auctioneer has earlier acknowledged in writing 

that the Bidder bids as agent on behalf of a named 

principal, the Bidder warrants that he has the authority of 

his principal to make each bid he makes. 

5. Conduct of the Auction 

5.1 The Auctioneer offers each Lot as agent of the Seller 

and not as principal unless otherwise indicated in the 

Auction Catalogue. 

5.2 Any Lot may be subject to a reserve price unless 

otherwise indicated in the Auction Catalogue. 

5.3 The Seller or his representative or the Auctioneer on 

his behalf may bid for any Lot unless otherwise indicated 

in the Auction Catalogue. 

5.4 The Auctioneer may at any time before the fall of the 

hammer withdraw or divide any Lot or combine any Lots. 

5.5 With the previous consent of the Seller, the 

Auctioneer may sell any Lot by private sale before or after 

the Auction. 

5.6 The Auctioneer may require any Bidder to give his 

name and address and proof of identity before accepting 

a bid. 

5.7 The Auctioneer may reject any bid at his sole 

discretion and without being required to give a reason. 

5.8 The Buyer shall be the person who made the highest 

bid before the fall of the hammer or such other person as 

the Auctioneer may declare to be Buyer without being 

required to give a reason. 

5.9 The Auctioneer may decide whether there is a 

dispute between Bidders, may summarily determine the 

dispute or immediately again offer the Lot for sale, in each 

case without being required to give a reason. 

5.10The Auctioneer shall in every other respect decide 

how the Auction is to be conducted and without being 

required to give a reason. 

5.11The Auctioneer may in his sole discretion delegate to 

a person whom he believes to be competent the conduct 

of the Auction in accordance with these General 

Conditions 

6 After the Sale 

6.1 Upon the Auctioneer declaring any Lot sold, the buyer 

shall immediately:- 

(a) give the Auctioneer his name and address and if 

requested his proof of identity; 

(b) identify any person on whose behalf he has bought; 

(c) pay to the Auctioneer if requested a deposit of up to 

25 per cent of the price. 

6.2 Within the time specified in clause 6.3 below, the 

Buyer shall pay the following sums to the Auctioneer in 

full:- 

(a) the balance of the price of all Lots purchased together 

with any VAT due; 

(b) the value as summarily determined by the Auctioneer, 

whose determination shall be final and binding, of all or 

part of any Lot or of the premises where the Auction is 

held which has been damaged or destroyed by the Buyer 

or his principal or agent. 

6.3 The time for complying with clause 6.2 above shall be 

the time specified in the Auction catalogue or if no time is 

specified there, 4pm on the next working day, and in every 

case time shall be of the essence. 

6.4 The Auctioneer may at any time in his sole discretion 

grant the Buyer an extension of time for complying with 

clause 6.2 above, in which case the Buyer shall pay the 

Auctioneer in full before moving or removing the Lot 

interest on any unpaid sums at a rate of 4 per cent above 

Barclays Bank Plc base rate in force from time to time. 

6.5 Until the Buyer has complied with clause 6.2 above:- 

(a) title to any Lot bought shall not pass to the Buyer; 

(b) the Lot shall be at the Buyer’s risk; 

(c) the Auctioneer shall have a lien over any Lot bought 

by the Buyer in the Auction; 

(d) if the Buyer effects or purports to effect a resale or 

any other disposition of all or part of the Lot, the Buyer 

shall hold the proceeds of resale or other disposition on 

trust for the Auctioneer and Seller. 

6.6 On written request by the Buyer the Auctioneer shall 

provide a VAT invoice in proper form, if appropriate. 

7. Removal of the Lot bought 

7.1 The Buyer may not remove any Lot he has bought 

until after the end of the Auction. 

7.2 The Buyer may not remove any Lot until the Buyer 

has paid the sums specified in clause 6.2 above in full for 

every Lot he has bought. 

7.3 After paying the sums specified in clause 6.2 above, 

the Buyer must remove the Lot bought by the time 

specified in the Auction Catalogue or if no time is specified 

there, 5pm on the next working day, and in every case 

time shall be of the essence. 

7.4 The Auctioneer may at any time at his sole discretion 

and on terms specified by him grant the Buyer an 

extension of the time specified in clause 7.3 above. 

7.5 If the Lot bought is or includes a motor vehicle, no 

warranty is given that the vehicle may safely or lawfully be 

driven on the road. 

7.6 When removing any Lot the Buyer:- 

(a) is responsible for detaching any Lot fixed to land and 

must do so safely and lawfully and must not use flame 

cutters, explosives or any other dangerous equipment or 

process without previous written permission signed by or 

on behalf of the Auctioneer; 

(b) must use safe and lawful means of removing the Lot; 

(c) shall indemnify the Auctioneer and Seller against any 

loss damage legal or other expenses and any claim 

arising from the detaching of the Lot or its removal. 

(d) shall have insurance in respect of such indemnity and 

shall on request produce to the Auctioneer a receipt for 

the last premium due or other sufficient evidence that 

such insurance has been effected and remains in force. 

8. Default by the Buyer 

8.1 If at any time the Buyer has failed either to pay the 

sums specified in clause 6.2 above in full by the expiry of 

the time specified in clause 6.3 above (or any extension 

granted under clause 6.4 above), or to remove any Lot by 


granted under clause 7.4 above) the Auctioneer may 

rescind the Sale of that Lot, in which case any deposit 

shall be forfeit, and that Lot may be resold by auction or 

privately. 

8.2 If the Auctioneer has rescinded the sale but the Buyer 

has removed the Lot bought, the Auctioneer shall be 

entitled without previous notice to enter upon any 

premises where he believes the Lot to be and remove it. 

8.3 If the Auctioneer has rescinded the sale and the Lot 

has been resold, the Buyer shall make good any 

deficiency, namely:- 

(a) the sale price less the resale price; 

(b) the costs of and incidental to resale. 

8.4 If because the Buyer has failed to remove any Lot by 


granted under clause 7.4 above), the Seller is unable to 

give vacant possession on disposing of or relinquishing 

any interest in the premises from which the Lot should 

have been removed, the Buyer shall compensate the 

Seller for any loss resulting. 

9. Liabilities and Indemnities 

9.1 The Auctioneer warrants that he believes that the 

Seller of each Lot is able to pass good title, and if the 

Seller is not able to do so, the Auctioneer shall use his 

reasonable endeavours to assist the Buyer in obtaining 

good title and in pursuing any remedies the Buyer might 

have against the Seller, but the Auctioneer shall not be 

bound to initiate litigation and shall not be under any other 

obligation to the Buyer. 

9.2 Every Lot is sold as seen and where lying. 

9.3 No Lot is sold as compromising or including any new 

goods. 

9.4 The Auctioneer neither has nor professes any expert 

or other knowledge of any Lot sold and is hereby excluded 

any liability the Auctioneer might otherwise incur and any 

right or immunity the Buyer might otherwise possess in 

respect of any conditions warranties or representations 

relating to the condition of any Lot sold or the 

merchantable quality of the Lot or its fitness for the 

particular or any purpose for which it is or may be required 

whether such conditions warranties or representations are 

expressed or implied in the Auction Catalogue or are the 

subject of oral or written statements made by or on behalf 

of the Auctioneer or any other person before or in the 

course of the Auction. 

9.5 No liability shall attach to the Auctioneer either in 

contract or in tort for loss, injury or damage legal or other 

expenses sustained by the Seller, any Bidder, the Buyer 

or any other person by reason of:- 

(a) any defect in any Lot sold, whether or not such defect 

be latent or apparent on examination; 

(b) any defect or danger of the premises where the 

Auction is held; 

(c) any alleged failure of the Auctioneer to properly 

advertise the Auction or to seek or obtain expert legal 

advice with regard to any Lot offered for sale or its reserve 

price; 

(d) any act or omission of the Auctioneer in the conduct 

of the Auction or after the Auction; 

(e) any act or omission of any person other than the 

Auctioneer. 

9.6 The Seller shall indemnify the Auctioneer in respect of 

any claims made by another or third party for any loss 

injury damage or legal or other expenses referred to in 

clause 9.5 above. 

9.7 The Auctioneer shall not be liable to indemnify the 

Seller or any Bidder or the Buyer in respect of any claims 

made by another or third party for any loss injury damage 

or legal or other expenses referred to in clause 9.5 above. 

9.8 Clauses 9.3 to 9.7 shall not be valid insofar as 

prohibited by statute. 

9.9 In no circumstances shall the Auctioneers be liable for 

any consequential damage. 

10. Waiver 

10.1No indulgence shown by the Auctioneer shall prevent 

the Auctioneer or the Seller from subsequently insisting 

upon their respective rights and remedies. 

2 

Pro Auction Limited 

Unit 5, Midsomer Enterprise Park, Radstock Road, Bath, BA1 6LD United Kingdom 

Tel: +44(0)1761 414000 Fax: +44(0)845 280 2492 Email: info@proauction.ltd.uk Website: www.proauction.ltd.uk 

Company Registration no: 5059610

SPECIAL NOTES & CONDITIONS 

(to be read in conjunction with the General Conditions of Sale 

as approved by The Royal Institution of Chartered Surveyors) 

Former Global Cake Ltd 

Bakery and Food Processing 

ADDRESS OF AUCTION: 

FORMER GLOBAL CAKE LTD 

Carnaby Industrial Estate 

Bridlington 

East Yorkshire YO15 3QY 

VIEWING Viewing is by arrangement with the 

auctioneers. 

REGISTRATION Prospective purchasers must 

register and obtain a buyer’s number when 

entering the site on Sale Day in order to be a 

successful bidder. A REQUIREMENT OF SUCH 

REGISTRATION WILL BE PHOTOGRAPHIC AND 

PROOF OF ABILITY TO PAY FOR POTENTIAL 

PURCHASES, (PASSPORT, DRIVING LICENCE). 

The Auctioneers reserve the right to refuse 

admission. 

Persons under the age of 16 will not be allowed 

on site. 

PAYMENT All lots must be paid and cleared for 

before prior to removal by Cash, Banker’s Draft, 

credit or debit card or Cheque supported by an 

appropriate Banker’s Letter stating that the Bank 

will HONOUR your cheque and the limit up to 

which they are willing to do so, unless 

otherwise agreed. 

V.A.T. V.A.T. will be added to sale bills at 17.5%. 

Special rules apply for sales for export – request 

information from the auctioneer 

BUYERS PREMIUM Buyer’s Premium of 15% 

plus V.A.T. will be added to purchasers bills. The 

Buyers Premium will relate to any sales which 

might take place prior to the auction, during the 

auction and after the auction and indeed to any 

Private Treaty Sales of items not included in the 

auction. 

DEPOSITS The Auctioneer reserves the right to 

take a 25% deposit at Point of Sale. Purchasers 

are reminded to leave a 25% deposit before 

leaving site on sale day. Payment in full must be 

made within 24 hours of the sale. 

ABSENT BUYING INSTRUCTIONS If you cannot 

attend the sale we will execute bids 

confidentially on your behalf. 

For absent bids indicate your limit for each lot, 

Your bids will be executed at the lowest prices 

allowed by reserves and other bids. 

A buyers premium plus applicable charges & 

taxes, is payable on successful bids. 

Absentee and telephone bids are accepted at 

your risk, and are subject to the Terms & 

Conditions of sale and any Special Conditions 

relating to the auction. 

Please submit your bids not later than 4 hours 

prior to the sale commencing, you will receive 

confirmation of receipt. 25% deposit required 

on composite total of bids. 

REMOVAL All lots which are subject to a lift-out 

charge are detailed on an information sheet 

available from the Sale’s pay office, where 

applicable the charges are mandatory. Goods to 

be removed from site between Monday 5th 

January 2009 and Thursday 15th January 2009 

by 4.00pm. 

SITE PROCEDURE The Vendor or Pro Auctions 

Limited are not liable for, nor accept any 

responsibility for any injury, loss or damage to 

persons or property sustained whilst on site. 

HEALTH & SAFETY LEGISLATION AND 

CONSTRUCTION, DESIGN AND MANAGEMENT 

REGULATIONS 1994. 

Purchasers should be aware of the above and 

comply as appropriate, they should attend at the 

beginning of the auction to hear the Auctioneers 

opening announcements regarding formal 

requirements it is also important that all 

purchasers/contractors comply with site rules, site 

procedures and Health & Safety Regulations. 

Purchasers are deemed to have listened to the 

Auctioneers opening announcements which may 

include amendments and/or additions to the 

Conditions of Sale. 

Unless specifically excluded purchasers of lots will 

be required to make good holes or voids exposed 

by the removal of lots. 

HAZARDOUS MATERIALS & SUBSTANCES If 

any hazardous materials or substances are to be 

removed or disposed of then such disposal will be 

the responsibility of the purchaser, but in 

accordance with all current Environmental 

Legislation and the Vendors procedures and audit 

requirements. Cladding taken off buildings for 

removal of plant & equipment will have to be 

replaced, unless otherwise specified by the 

Auctioneer. 

COMPLIANCE WITH LAWS, REGULATIONS 

AND PLANNING Purchasers or their Removal 

Contractors are responsible for applying for 

relevant planning permissions (if appropriate) with 

reference to the removal of building structures and 

plant housings. 

Purchasers or their Contractors shall at all times 

comply with all orders, regulations, requirements 

and rules of any authority whether Parliamentary, 

statutory, parochial or local and in particular shall 

comply with all requirements applicable to the 

employment by them of labour or otherwise 

affecting the work. 

The Purchasers or their Contractors shall in 

addition and without prejudice to the generality of 

the foregoing conform to the regulations and 

byelaws of local authorities and shall pay all fees 

and charges arising under the said regulations and 

byelaws in respect of the Work. 

ELECTRIC CABLE/PALLETS Electric cable and 

pallets are not included with the sale of any lots 

unless otherwise indicated. 

ORDER OF REMOVAL Buyers should co-operate 

regarding order of removal in order to comply with 

the clearance date. If it transpires that a purchaser 

makes no effort to commence dismantling and the 

particular item of plant is preventing other buyers 

from removing equipment, then the Auctioneer 

reserves the right to insist that removal take place 

immediately notwithstanding the final clearance 

date. 

If in the event the purchaser does not comply, then 

the Auctioneer reserves the right to arrange for the 

removal of the lot or lots and charge any attendant 

costs to the purchaser. 

INSURANCE The Auctioneers remind prospective 

bidders of Condition 7 of the Conditions of Sale. 

Any buyers of fixed plant or their duly appointed 

contractors MUST consult with the Auctioneers duly 

appointed representative, prior to commencing 

removal. Written consent to commence dismantling 

will be required. It should also be noted that all 

dismantling contractors working on site must be 

insured for at least two million pounds (£2,000,000) 

public liability cover and proof of cover must be 

produced before work commences. 

Lots must be insured by the purchaser from the fall 

of the hammer, no responsibility whatsoever will 

rest with the Auctioneer or Vendor in the event of 

any loss suffered. 

The Purchaser or his Contractor will also ensure 

that employers liability cover in the sum of TEN 

MILLION POUNDS (£10,000,000) is in place. 

CONTENTS All items in, under, over and around 

any lot in this catalogue are not included with such 

lot unless stated in the catalogue description or by 

the Auctioneer 

DOCUMENTS The Vendors/Agents/Auctioneers 

reserve the right to remove any documents they 

may require from the lot prior to the sale or at any 

later date. 

SOFTWARE Title to computer Software is not 

transferred and use is subject to any licence or 

copyright restrictions and user conditions. 

The Vendors/Agents/Auctioneers reserve the right 

to erase any private or sensitive information prior to 

delivery or at any later date 

INSPECTION & CONDITION: The articles may be 

inspected at the times and place set out in the 

Catalogue. Each buyer (whether or not he inspects 

those articles which he purchases) shall be 

deemed to buy with notice of all defects in them. No 

buyer shall have the right to reject for any reason 

any articles which he may purchase. Every express 

or implied warranty or condition as to 

merchantability, condition or fitness for purpose of 

any of the articles is excluded. 

UNSOLD LOTS If any lot or item is unsold and has 

to be dismantled & lowered to allow the removal of 

any other lot, then such dismantling & lowering 

shall be the responsibility of the purchaser of the 

relevant Lot(s) or Item(s). 

CONDITIONAL SALES Please note the 

Auctioneer reserves the right to effect conditional 

sales on certain lots. 

The Auctioneer reserves the right to rescind the 

sale of lot(s) if purchasers or their contractors fail to 

provide a satisfactory Method Statement in 

accordance with current Health & Safety 

Regulations(or if their transport arrangements are 

considered unsuitable). 

RESERVES Where applicable, Lots will be offered 

subject to reserve prices. 

LOTS with a quantity greater than 1 shall be offered 

on an individual basis – the highest bidder shall 

have the option, at the auctioneers discretion, to bid 

for 1 or all of the quantity available. 

WARNING 

It is a criminal offence to form a ring at auction 

or to induce another to abstain from bidding. 




Company Registration no: 5059610 

3

Please note all capacities, dimensions and dates of 

manufacture are approximate and potential purchasers 

should make their own inspection for verification. 

MANNER OF OFFERING In order to assist prospective purchasers the plant has been broken down into individual lots for 

identification purposes. The auctioneer has absolute discretion regarding the offering of the lots and may offer lots as a group or 

consolidated lots, but where possible prospective purchasers wishing to bid for individual lots will be accommodated. 

LOT No. DESCRIPTION NOTES 

LINE 2 BAKE AREA 

1 M A Rademaker BV UDVl biscuit production line comprising of dough feeder 

slitter trimmer, flour duster roller unit and biscuit cutter (s/n 28395 -5EW) - 

manufacturer website - www.rademaker.com/ 

2 Mono FG400 tilting dough mixer (s/n 099143958) - 

manufacturer website - www.monoequip.com 

3 Mondomix Topos jacketed mixer model 1787-4 with food pump discharge - 

manufacturer website - www.mondomix.nl/ 

4 Meincke gas fired band oven with in-feed conveyor to guillotine, slitter and greaser 

1500mm width - manufacturer website - http://www.sasib.com/ 

5 Mondomix UB25 mixer with fed tank and pump (s/n 11423) - manufacturer website - 

www.mondomix.nl/ 

6 Cox Denholm Rotorack 8 rack gas fired rotary oven 

7 Cox Denholm Rotorack 8 rack gas fired rotary oven 

8 Modular walk through cooling tunnel eight fan cooling overall dimensions 3500mm x 

7500mm holds approximately 30 racks 

9 Chill room 6 refrigeration compressor and two four-fan evaporator units 

10 DCA 8 wide Maxecon industrial donut production and frying line comprising depositor, 

roller finisher & fryer (s/n 62524) 

10a DCA conveyorised donut fryer (s/n 64399) 

11 Rheon butter feeder model OC891 (s/n 001) 

12 APV Uniplex mixer (s/n 351/217) 

13 APV Uniplex mixer (s/n 351/215) 

14 Modomix Topos 1787 industrial dough mixer on rise and fall platform 

15 Sidam KF150DE batch freezer (s/n 8820030) YOM 2000 

15a Crypto Sigma arm blade mixer 1000ltr stainless steel front end discharge open frame 

mixers features direct drive, stainless steel tubular frame and a stainless steel product 

zone #304 stainless steel bowl, canopy, agitator, agitator shaft and coolant jacket. - 

manufacturer website - www.shaffermanufacturing.com 

15b Effedue Unimix SRC 2000 series stainless steel mixer with hydraulic lid lifting device, 

vacuum / pressure tight with heating/cooling jacket, agitator system with wall scrapers 

internal homogenizer (s/n 7346) - manufacturer website - www.effeduesrl.com 

16 Dar Kool batch freezer with agitator pump 

17 Tekno Ice FRA350 ice cream machine freezer (s/n FR8003) 

18 Stainless steel heated garlic butter mixing unit comprising 300ltr jacketed mixing tank 

and 500ltr holding tank complete with two DL50 SLGGQ diaphragm pumps skid 

mounted 

18a Skid mounted 2 x 300ltr mixing vessels with scrape surface 

19 Cowie & Riding continuous aerator 

20 Sancassiano SE500 / 400 spiral mixer - 

manufacturer website - www.sancassiano.com/ 

21 Avery Berkel H300/L101 platform scale 60kg 

22 Avery Berkel H300/L101 platform scale 60kg 

23 Koenig Celba Combi SFB with RW1000 model K38-001-0001 (s/n 3800008) 

23a Mondomix A15 continuous aerator 

23b Stainless steel 500ltr vessel with agitation and pump, bottom discharge valve 

24 APV Puma pump C11693 2” - 2.5” - 9” with 150ltr stainless steel holding vessel 

4


25 D&D Engineering Introlox belt collating conveyor with product diverters (s/n 33921) 

26 M A Rademaker 1000mm wide pie making line (Line 4 bases) complete with pastry 

brake & strip feeder, pie platen conveyor, foil positioned, pastry brake and roller, lid 

cutter, trimming station and scrap return belt, cross feed conveyor and associated 

change part. - manufacturer website - www.rademaker.com/ 

27 Oakes continuous mixer aerator 

28 Stainless steel 1000ltr capacity mixing vessel 

29 Stainless steel jacketed mixing vessel 400ltr 

30 Oakes continuous mixer aerator 

31 Bruel Lanemark through feed continuous tray washer and drying unit complete with 

line de-tinner and tray greaser 

32 Newsmith Silver Metro through feed continuous recirculated tray washing and drying 

unit complete with line de-tinner and tray greaser (s/n M856) 

33 Van der Pol 46mtr travelling gas fired band oven 

34 Van der Pol 46mtr travelling gas fired band oven 

34a Van Rietschoten En Houwen 3400 oven loader and un-loader 

34b Electric two deck six zone band oven 40ft long x 8ft wide 

35 Mondomix air cabinet aerator (s/n P1323701) 

36 Cowie & Riding stainless steel continuous cream aerator 

37 Millers M300 dough mixer with stainless bowl 

38 Hobart M802 80 quart planetary mixer with stainless steel bowl planetary mixer - 

manufacturer website - www.hobartuk.com 

SCALING 

39 Sancassiano SE400 mixer with control panel and mixing bowl - 

manufacturer website - www.sancassiano.com/ 









44 VMI SP1208E fixed bowl spiral mixer (s/n 888812) 

44a VMI SPI1280AM spiral mixer (s/n 102141) 

45 VMI SP1220ET spiral mixer with loader (s/n 70986) 

46 Rondo pastry brake electronic control panel 

47 DCA sheeter (s/n 225) 

48 Rondo Seewer Derek mini croissant machine 

49 Rondo Seewer multi roller sheeter type PRB600 (s/n A917402) 

50 Rondo Sewer ZKWA 607A sheeter (s/n B3040011) 

50a Oddy Novatek 428 six pocket roll machine 

50b Oddy Novatek 428 eight pocket roll machine 

51 Konig five finger 4 x 3 roll plant comprising of Konig Rex Automat T5/4 x 3 SI 470-9 

hopper, divider moulder, intermediate proover, roller table, pinner rounder and 

retracting sheeting table 15,000/ph (s/n 03-02-7070) - 

manufacturer website - www.koenig.co.at 

52 Kemper five piece dough line comprising divider, intermediate proover, rollers, roller 

table, cutter and sheeting table (s/n AB90135-1-L-L) - 

manufacturer website - www.emil-kemper.com/ 

53 Kemper four finger roll line comprising divider, moulder, intermediate proover and 

sheeting table - manufacturer website - www.emil-kemper.com/ 

54 Complete Pretzel production line comprising sheeting table, moulder, toaster and 

automatic rack loader with racks 

54a Rondo pastry sheet line with guillotine model ZGP665-C 

5


54b 

54c 

54d 

54e 

54f 

54g 

Belsham Century 100 electric fryer 300mm belt width 

Electrix six lane donut slitter with sugar tumbler 

Stainless steel framed cloth belt conveyor 700mm wide x 2.2mtr 

Stainless steel framed neoprene inclined belt conveyor 600mm x 2mtr 

Stainless steel framed neoprene flighted belt conveyor 300mm x 3mtr 

Jimmy Ennis CRM500 crumbing machine 

55 Rheon egg glazer model 8F002 (s/n 0007) - manufacturer website - www.rheon.com 

56 MMM& PF Holtzheim moulder (s/n 37465) 

57 JBS Process Engineering six finger intermediate prover (s/n 1592C) 

57a Werner & Pfleiderer divider moulder with intermediate prover and rolling table with 

guillotine 

58 Fred Johnson savoury pie line two comprising of blocker, sheeter and crimper. 

complete with tooling for 4oz pies. 

59 Arcall oil / fat model 100 spray glazer (s/n 8917) - 

manufacturer website - www.arcall.co.uk 

60 Arcall model 100 spray glazer - manufacturer website - www.arcall.co.uk 

61 Arcall 650SP spray glazer (s/n 8697) 

61a Arcall spray glazer 

62 Continuous tray index deposit line complete with four head Turbo depositor and 

glazing station 

63 Benier B8-30 divider (s/n 2000079) YOM 1999 

64 Freshbake Aslan four across pie & tart production line 

65 Total Bakery Engineers Asser four across tart & pie production line - 

manufacturer website - www.totalbakeryengineers.co.uk/ 

66 Conical moulder 

67 Rondo SPF602B make up part line (s/n B3037001) 

68 Bagel moulder 

69 Bagel moulder 

69a Bagel moulder 

69b Six lane feed conveyor to bagel moulders 

70 Skerman 500ltr mixing vessel with agitation 

70a Tote bin hoist 

70b Scanio DK K7 mixer bowl hoist 

70c Mixer bowl hoist 

71 Babcock 400 ltr ribbon mixer blender (063209) 

72 Babcock 400 ltr ribbon mixer blender (06320X) 

73 Stainless steel holding tank 1000ltr capacity with agitation 

74 Stainless steel 1000ltr holding tank with agitation 

74a Gardner Kemutec three arm paddle mixer 200ltr capacity (s/n 101638) 

75 Stainless steel 1000ltr holding tank with agitation 

76 3 x stainless portable 500ltr vessels 

77 Avery H500/L101 60kg platform scale (s/n 100F40809) - 

manufacturer website - www.averyberkel.com 

78 Stainless steel heated vessel 

79 Stainless steel mobile pump 

80 Croda twin grease pumping system 

81 Ingersoll Rand twin diaphragm pump ARO PO305 BSS AAA B - 

manufacturer website - www.ingersollrand.com 

82 GEC Avery H300/L202 60kg platform scale - 


83 GEC Avery L107 60kg platform scale - manufacturer website - www.averyberkel.com 


85 Avery H300/L101 60kg platform scale (s/n 1009G62252) - manufacturer 

6


COMAS PIE / TART LINE 

86 Comas complete 1000mm pie making line comprising intermittent running conveyor, 

pie platen conveyor, foil placer, dough extruder and conveyor, hydraulic billeter & 

blocker, presser, online depositor, product duster, dough disc moulder, cutter, sealer 

and lift off unit complete with numerous change parts, control panel and guarding (s/n 

3009 YOM 1999) complete with VMI 550 MAEH dough fork 200kg flour mixer 

complete with automatic bowl tipper and spare bowl (s/n 102591) 

87 Skerman jacketed steam batch cooker system with cooker set, agitated jacketed 

holding vessel and associated gantry (s/n F3445) complete with APV CL2052- 

10980447 transfer pump Alfa Laval MR166 transfer pump (s/n 16723) and gantry 

88 Jacketed chocolate tempering kettle 

89 Jahn Huntingdon stainless steel jacketed mixing vessel 300 litre capacity (s/n 40-300) 

- manufacturer website - www.f-jahn.co.uk 

90 Avery H300/L101 60kg platform scale (s/n 100F4080-10) - 


91 FPL diaphragm pump - manufacturer website - www.flotronicpumps.com 

92 Mondomix UB25 continuous cream aerator (s/n 11422) with Skerman stainless steel 

mixing kettle with mono pump tribol pumps and FPL diaphragm pump - 

manufacturer website - www.flotronicpumps.com 

93 FP Packaging Limited reciprocating foil depositor complete with indexing conveyor 

and four head foil greasing unit (s/n 7038 YOM 2003) - 

manufacturer website - www.freeze-pack.com/ 

93a Collective bid on lots 86 to 93 inclusive as detailed above 

LINE 5 BASE PRODUCTION 

94 Poly band conveyor on stainless frame 600mm x 3400mm 

95 Jahn mobile plastic slatted belt assembly indexing conveyor 350mm wide x 5m 

centres with compressed air piping and valves. 


centres with compressed air piping and valves. - 

manufacturer website - www.f-jahn.co.uk 

97 Cylinder food pump depositor 

98 Oakes continuous aerator - manufacturer website - www.oakes.com 

99 Collette SM300 spiral dough mixer with stainless steel bowl (suitable for repair) - 

manufacturer website - www.collette.be 

100 Avery GEC 60kg platform scales (s/n 124T100) - 



102 Artofex dough mixer with two mobile stainless bowls fully guarded - 

manufacturer website - www.euromixltd.co.uk 


104 Introlox bet 90 degree conveyor on stainless steel frame 60mm wide belt to collator 

105 Introlox belt 90 degree conveyor 300mm wide belt 4000mm overall 


107 Kerry poly band conveyor 90 degree turn 350mm wide belt 

108 Poly band conveyor 300mm x 600mm 

109 Cyclotex neoprene belt / poly band conveyor 330mm wide belt 

110 Plastic slatted belt S bend style conveyor 1000mm wide belt x 4500 overall 

110a Maho baguette slicer 

110b Maho HG42216 baguette slicer 

110c Delta 4 bread slicer (s/n 8090) 




112 Arcall model 100 oil & fat spray glazer (s/n 8924) - 

manufacturer website - www.arcall.co.uk 

113 Apple Meteorite depositor (s/n MR280920) - manufacturer website - www.appleng.co.uk 

7


114 Turbo Obrut single depositor - manufacturer website - www.turbo- systems.com 

115 Turbo Obrut depositor rise & fall stand - 

manufacturer website - www.turbo-systems.com 

116 Apple Meteorite depositor (s/n MR1491087) - 

manufacturer website - www.appleng.co.uk 

117 Podmores single head liner depositor - 

manufacturer website - www.podmoresengineers.com 

118 Podmores mobile vibratory topping feed unit (s/n 27831) - 


119 Banding conveyor with glazing head 1000mm x 1500mm 

120 Tromp Engineering six head depositor with make up table & guillotine 

121 Vickers Euromidas portable shear mixer 

122 BCH jacketed 500ltr batch cooking vessel with scrape surface and agitation complete 

with associated gantry - manufacturer website - www.bchltd.com/ 

123 Silverson model 425LS skid mounted food pump set - 

manufacturer website - www.silverson.com 

124 Case Systems Limited disc glazer 

125 Spare 

126 Arcall spray glazer - manufacturer website - www.arcall.co.uk 

127 OPM OPM80 · 1.5vbag capacity spiral mixer 

128 Millers SM300 mixer with stainless steel bowl 



130 Collette SM300 dough mixer - manufacturer website - www.collette.be 

131 Stainless steel electric tipping pan 

132 3 x DC Norris automatic can openers 

TRAY WASH 

133 Bruel WB800 through feed tray washing system 900x 300mm trays on rail (s/n 4179) - 

manufacturer website - www.bruel.dk 

134 Bruel WB800 through feed tray / basket washer - 

manufacturer website - www.bruel.dk 

135 Newsmith steam cabinet tray and bin utensil washer - 

manufacturer website - www.newsmiths.co.uk 

136 Electrix Northern Dynajet crate washer 

137 Numafa crate washer (suitable for spares) 

137a Newsmith jockey Hydro tray washer model KM333 - 

manufacturer website - www.newsmiths.co.uk 

137b Stainless steel through wash tote bin washer steam cabinet 

DANISH PASTRY PRODUCTION 

138 Complete Danish production line comprising GTP 800mm wide universal pastry 

processing unit, two level billet in-feed, flour dusters, associated feed conveyors, 

reciprocal cutter, front and rear twisters, dust extraction system and associated 

product out feed conveyors - manufacturer website - 

139 Fedco depositing line model PF40 (s/n 200044) complete with Fedco six head 

depositor model CP40CL portable stainless steel (2000-45) - 

manufacturer website - www.fedcosystems.com 

140 Spare 

141 Sancassiano 300ltr spiral mixer with two stainless bowls 

142 M A Rademaker 800mm wide universal pastry line (line 7 ) comprising of two level 

billet in-feed, flour dusters, pastry processing unit, rollers & gauges, sugar depositor, 

Gainsborough guillotine and associated gantry - 

manufacturer website - www.rademaker.com/ 

143 Oase SPK150 AE/S spiral mixer 

143a Oase SPK150 AE/S spiral mixer 

8



145 Semi automatic pastry blocker 


LINE 4 TOPPING 

146 Plastic slatted belt conveyor 600mm wide belt 

147 Inclined poly band conveyor 750mm wide belt 

148 Introlox belt conveyor 600mm wide belt (H000025) - manufacturer website - 

149 Sewtec Automation nut cake conveyor complete with Podmores linear feeder - 

manufacturer website - www.sewtec.co.uk 

150 Crumb depositor over poly band conveyor (s/n 3Genemco USA) - 

manufacturer website - 

150a Technopool Anaconda metal band transfer conveyor 

151 Podmores mobile vibratory topping feed linear unit (s/n 28334) - 


152 Twin lane icing line depositor poly band conveyor 

153 Podmores mobile vibratory topping feed linear unit - 


154 Van der Pol ten burner toasting oven (s/n 522700) - 

manufacturer website - www.vanderpol.nl 

155 Van der Pol in-feed conveyor system 650mm wide belt - 

manufacturer website - www.vanderpol.nl 

156 Mondomix UB25 continuous cream aerator (s/n 12025) complete with stainless steel 

low level food pump with holding tank 

157 Mondo DSM screw cream pump - manufacturer website - www.mondomix.nl/ 

158 Turbo Obrut depositor (MIK331288) - manufacturer website - www.turbo-systems.com 

159 Mondomix VE50 creaming machine with stainless steel jacketed holding vessel and 

agitator (s/n P13325-06 / 990201A) - manufacturer website - www.mondomix.nl/ 

160 Mondomix VE50 creaming machine with stainless steel jacketed holding vessel and 

agitator (s/n P13326-06 / 990201A) - manufacturer website - www.mondomix.nl/ 

161 Stainless steel 500ltr holding vessel 

162 Sewtec Automation nut cake conveyor complete with Podmores linear feeder - 

manufacturer website - www.sewtec.co.uk 




164 Stainless steel band conveyor 700mm wide belt overall 17m length 

165 Poly band conveyor on 90 degree 600mm wide belt 

166 Poly band conveyor 900mm x 900mm - manufacturer website - 

167 Coffin poly band conveyor 400mm x 2500mm 

168 Avery H300/L101 60kg platform scales (s/n 1005388015) - 


169 Stevens 2100 60kg platform scale (s/n TC2523) - manufacturer website - 

170 Avery H265 45kg platform scale (s/n 018289) - 


LINE 4 COOK 

171 APV Pulvermixer MK (s/n 1685293) complete with stainless steel agitated holding 

vessel 


173 Graco Bulldog 215/255 stainless pump - manufacturer website - www.graco.com 

174 3 x stainless steel portable 200ltr daleks 



9


177 4 x Stainless steel portable DARLEK 100ltr hold tank with bottom discharge valve 

(2 x lots available) 

178 Stainless steel jacketed heated 300ltr vessel with paddle mixing 

179 Wymbs CN4065 50ltr mobile jacketed mixing vessel with scrape surface 

179a 

Collective bid on lots 171 to 179 inclusive as detailed above 

BAVARIAN LINE 6 

180 Special purpose twin lane four head automatic gateaux forming machine, complete 

with former, sponge feed, pick & place, multi creamers and tamping unit 

181 Bell twin level vibrosaw sponge cake cutter 

182 Stainless steel inclined metal band conveyor 500mm wide overall 6000mm 

183 Riggs SCT5503 depositor (TT301) - manufacturer website - www.autopack.co.uk 

184 Apple Meteorite depositor (s/n MR208189) - 

manufacturer website - www.appleng.co.uk 

185 Mobile stainless steel 200ltr tank with integral twin pigtail food pump 

186 Mondomix F50 creaming machine (s/n 12093A) - 

manufacturer website - www.mondomix.nl/ 


188 Introlox belt conveyor with product diverter 1200mm x 2500mm 

189 M A Rademaker twin head four lane chocolate flaking / shaving machine with 

automatic spacing - manufacturer website - www.rademaker.com/ 

190 Introlox belt 900mm wide production conveyor feeding to chocolate flaker 4000mm 

overall 

191 Introlox belt 600mm wide belt conveyor overall 15mtrs long 


192 Kerry twin lane Introlox belt production conveyor two x 300mm wide belt complete 

with manual pick & work place stations 

193 Mono Goldbake two rack type FN Aerotherm B14-30-AC1-2 gas rotary oven - 

manufacturer website - www.monoequip.com 

194 Revorack IV single rack stainless steel electric rotary oven - 

manufacturer website - www.double-d.co.uk 

195 Cox Denholm six rack gas fired rotary oven 

196 Cox Denholm four rack Rotorack gas fired oven (s/n 100001218) - 


196a Tom Chandley Compacta four deck split low crown 16 tray deck oven - 

manufacturer website - www.chandleyovens.co.uk 

196b Tom Chandley Compacta three deck low crown deck oven (s/n 7339) 

BAVARIAN LINE 1& 2 

197 Mondomix A05 skid mounted aerator complete with two pressure vessel pumps 

(s/n 11783) 

198 Stainless steel glazer over wire mesh belt conveyor 

199 Sara Lee mini Gateaux production line (in need of electrical works) 

199a Stainless steel six portion pneumatic cake portioner 

200 Gami TR300 Tunnel Frigo freezer 

201 Gami Choco Line R400 enrober 

201a Chocoma Type 2 chocolate enrober 




205 Podmores linear weigher / nut depositor - manufacturer website - 

www.podmoresengineers.com 

206 Graco President air power pump (s/n 207352) - manufacturer website - www.graco.com 

207 Jahn mobile plastic slatted belt assembly indexing conveyor 350mm wide x 5m centres 

with compressed air piping and valves. - manufacturer website - www.f-jahn.co.uk 

10


208 Apple Meteorite depositor (s/n MR1501087) - manufacturer website - 

www.appleng.co.uk 

209 Turbo Obrut single depositor (s/n ND181983) - 


210 Turbo Obrut single depositor (s/n SLA00036) - 


211 Cyclotex neoprene belt product conveyor 330mmx 5500mm 

212 Turbo depositor (s/n NMD 740589) - manufacturer website - www.turbo-systems.com 

213 Turbo Obrut single depositor (s/n SD846881) - 


214 Turbo Obrut single depositor - manufacturer website - www.turbo- systems.com 

215 Polin WELC94 multi drop depositor 

216 Mono type HG739 multi drop depositor 

217 Mono MK6 multi drop depositor (s/n 10760) 

218 Mono MK6 multi drop depositor (s/n 7323) 

218a Mono multi drop depositor (s/n HG41798) 

219 Rademaker 50ltr stainless steel jacketed vessel 

220 Turbo three head portable depositor with hopper 

221 Single shot depositor 




225 Risco RS200 200ltr paddle mixer 

226 F Jahn & Co portable stainless steel heated kettle with pump - 


227 F Jahn & Co portable stainless steel heated kettle with pump - 


227a F Jahn & Co portable stainless steel heated kettle with pump - 


228 3 x various portable vessel tanks 

229 5 x depositors for spare or repair 

230 5 x depositors for spare or repair 

231 Bavarian 38 gateaux per minute four station gateaux forming machine 

232 Mondomix UB25 continuous cream machine complete with stainless holding vessel 

and pump unit - manufacturer website - www.mondomix.nl/ 

233 Terlet vacuum cooling stainless steel tank holding system (s/n 87/300) - 

manufacturer website - www.terlet.com/ 


234 Mondomix UB25 continuous cream machine complete with stainless holding vessel 

and pump unit - manufacturer website - www.mondomix.nl/ 


236 Bavarian 38 gateaux per minute four station gateaux forming machine 


237 M A Rademaker twin head four lane chocolate flaking / shaving machine with 

automatic spacing - manufacturer website - www.rademaker.com/ 

238 Introlox belt conveyor 1000mm wide x 2000mm overall 

239 Introlox 90 degree 300mm wide belt conveyor 

240 Cyclotex poly band conveyor 90 degrees 300mm wide belt (s/n 300206) 

241 Variable speed Introlox belt conveyor on frame 600mm x 350mm 

LINE 1 MAIN COOK / SAUCE ROOM 

242 Complete sauce cook & hold plant comprising stainless steel 1000ltr capacity holding 

vessel, 2 x Skerman jacketed steam batch cooker with scrape surface mixing and 

agitation (s/n A3869), 2 x Base Product Ltd 500kg pallet /bin hoist (s/n PLM500- 

2200MG) - Raque stainless steel mix holding vessel with agitation, APV Manton 

11


Gaulin homogenizer - manufacturer website, Alfa Laval type N35 plate heat 

exchanger (s/n 25423), APV Puma pump C171508, APV 1.5” CIP pump, 4 x APV 1.5” 

Puma food pump, Inoxpa food pump (s/n 225334A), Stainless steel 1500 litre holding 

tank. 

243 Complete sauce cook & hold plant comprising 2 x Skerman jacketed steam batch 

cooker with scrape surface mixing and agitation , Base Product Ltd 500kg pallet /bin 

hoist , Stainless steel mix holding vessel with agitation, APV 3” food pump C335013, 

APV food pump CL2S0668, APV stainless steel CIP pump, Inoxpa SLR2/50 food 

pump, APV Manton Gaulin homogenizer, Alfa Laval AMIO plate heat exchanger 

(s/n 30100-18791), JA Welch 750ltr stainless steel tank, Stainless steel 700ltr tank, 

APV CIP pump and Inoxpa SLR3/80 pump 

244 Skerman jacketed heated vessel - fat cooker with APV pump (s/n 185) - 

manufacturer website - www.bptskerman.co.uk 

245 Skerman jacketed heated vessel - fat cooker with APV pump (s/n NS1490) - 


246 Skerman jacketed heated vessel - fat cooker (s/n NS000) - 


247 Skerman jacketed heated butter fat melt kettle (s/n F3183) - 


248 Jahn chocolate kettle 500kg capacity (s/n 69/314A) - 


249 Jahn fondant kettle - manufacturer website 

250 Stainless steel 1000ltr holding vessel with agitation 

251 Stainless steel 200ltr pressurised portable vessel 

252 Stainless steel 500ltr pressurized holding vessel 

253 Stainless steel 300ltr mobile pressure vessel 

254 Skerman jacketed steam batch cooker system with cooker set, agitated jacketed 

holding vessel and associated gantry and pumps (s/n NS1530) - 


255 Stainless steel 1000ltr holding vessel 

256 Stainless steel 400ltr holding tank 

257 Graco Bulldog 215/255 stainless pump - manufacturer website - www.graco.com 


258 Urschel RA dicer slicer 

259 Urschel RA dicer slicer 

260 Urschel model CC dicer slicer - manufacturer website - www.urschel.com 



263 Inoxpa SL3/50 pump (s/n 23583A) - manufacturer website - www.inoxpa.co.uk 

264 Inoxpa SL3/50 pump (s/n 233166A) - manufacturer website - www.inoxpa.co.uk 

265 APV 3” food pump C335013 - manufacturer website - www.apv.com 

266 Stainless steel 100ltr mixing vessel 

267 Weigh station platform comprising of elevated gantry stainless steel tables x 3 and 

Avery L214 30kg platform scale - manufacturer website - 

268 Avery L116 60kg platform scale - manufacturer website - www.averyberkel.com 

SECRET BITES FLOW WRAPPING 

269 Gorring Kerr metal detector aperture 360mm x 160mm 

270 Record Jaguar horizontal flow wrapper with Markem 984 date coder 

271 Record Jaguar horizontal flow wrapper 

272 Ilapak Record Panda horizontal flow wrapper 

273 Ilapak Jaguar flow wrapper (suitable for spares) 

274 Ilapak Jaguar horizontal flow wrapper 

275 Ilapak Jaguar horizontal flow wrapper with Markem 904A date coder 

276 Ilapak Record Panda stainless steel horizontal flow wrapper 

12


277 Norprint Vega 80 label applicator 

278 Assi Doman Packaging Machine Systems 2000 wrap around case packer 

278a Assi Doman Packaging Machine Systems 2000 wrap around case packing line (VKB0503) 

PACKING HALL 

279 Klicklock Concorde K170 carton erector and inserter (s/n HSK-170-13011-KM) - 

manufacturer website - www.kliklok.com 

280 Klicklock Concorde K170 carton erector and inserter (s/n HSK-170-13037-KM) - 


281 Klicklock Concorde K250 carton erector and inserter (s/n HSK-250-1101KM) - 


282 Klicklock Concorde K250 carton erector and inserter (s/n HSK-250-110X) - 


283 Klicklock Concorde K170 carton erector and inserter (s/n HSK-170-130XX-KM) - 


284 Freemantle Superior S11 cartoner (s/n 03-155) 

285 Freemantle series T7 carton erector & gluer (s/n 92008) - 

manufacturer website - www.tfreemantle.com 

285a Packaging Automation model PA238 automatic integral variable speed, conveyor-fed 

heat sealing tray sealer capacity to 32 ppm complete with die set 

285b Jacob White cartoner 

286 Ling Systems Introlox belt two tier conveyor system with bend and straights inclined 

overall 40mtrs long x 350mm each belt 

287 Neoprene belt decline conveyor 250mm x 10mtr 

288 Introlox belt flighted decline conveyor 300mm x 10mtr 


290 Neoprene flighted belt decline conveyor 300mm x 10mtr 

291 Neoprene belt decline conveyor 300mm x 10mtr 

292 Neoprene flighted belt conveyor 300mm x 10mtr 


294 Neoprene flighted belt decline conveyor 300mm x 10mtr 

295 Introlox belt double S bend conveyor 300mm wide x 10mtr 

296 Slatted plastic belt conveyor 300mm x 5mtr 

297 Neoprene belt conveyor 250mm x 8mtr 

298 Cryovac CJ51 -400 3V hot air heat shrink tunnel (s/n A91200504) - 

manufacturer website - www.cryovac.com 

299 Klicklok 872 XSL automatic bag closing machine (s/n 00230) - 


300 Endoline 708 carton taper with out feed (s/n 98087905) 

301 Jacob White Model 4 cartoner (s/n 6672) 


303 Cintex Micro search metal detector aperture 350mm x 150mm 

304 Gorring Kerr metal detector aperture 600mm x 180mm 

305 Introlox belt inclined conveyor 350mm x 10mtr 

306 Loma Superscan S metal detector twin head type F & Micro - 

manufacturer website - www.loma.com 

307 Loma 6000 check weigh station with conveyor and reject arm (s/n 600106) - 


308 Harland Proteus 155-S label applicator 

309 Harland Proteus 155-S label applicator 

310 Herbert Digi LA2600 label applicator 

311 Introlox belt 90 degree conveyor 360mm x 6mtr 

312 Loma 6000 check weigh station with conveyor and reject arm 

313 Ling Systems slatted plastic belt conveyor 300mm x 2.5mtr 

13




316 Kwicklock bag tie machines x 2 

317 Kwicklock bag tie machines x 2 

318 Loma 6000 check weigh station with conveyor and reject arm 

319 Take - A - Way Elite 60kg platform scale 




323 Dart Developments denester (s/n 0089) 

324 FP Packaging Pnuefeed 376 stainless steel twin head tray denester .(s/n 7878) - 

manufacturer website - www.freeze-pack.com 

325 Siat carton taper 

326 Loma IQ metal detector aperture 350mm x 150mm with air reject - 


327 Neoprene belt conveyor 300mm x 2.5mtr 

328 Plastic slatted belt conveyor 300mm x 15mtr 

329 Metal roller conveyor 600mm x 1.5mtr 

330 Flighted plastic belt conveyor 450mm x 8mtrs 



333 Linx 4200 series ink jet coder 

334 Linx 4200 series ink jet coder 

335 Twin head ferrous / non ferrous metal detector aperture 400mm x 100mm 

336 Domino Solo 6 IP65 ink jet coder - manufacturer website - www.domino-printing.com 

337 Otem MACH 200 stainless steel flow wrapper complete with Ling narrow stainless 

steel heat shrink tunnel (129) - manufacturer website - www.ctpack.com/ 



340 Ling Systems slatted plastic belt conveyor 300mm x 8mtr 

340a Introlox belt conveyor 300mm x 4mtr 

340b Stainless framed neoprene belt conveyor 300mm x 3mtr 

341 Linx 4100 Midi ink jet coder (s/n LP41204) - manufacturer website - www.linx.co.uk 



344 Plastic belt reject conveyor on workstation 450mm x 2mtr 

345 Ling Systems slatted plastic belt conveyor 300mm x 10mtr 

346 Linx 4200 series ink jet coder (s/n LP44097) - manufacturer website - www.linx.co.uk 



349 Linx 4100 Midi ink jet coder (s/n LP41218) - manufacturer website - www.linx.co.uk 

350 Loma check weigh station with reject arm (s/n 600034) - 



352 Linx 4000 series ink jet coder (s/n LP41226) - manufacturer website - www.linx.co.uk 

353 Linx 4100 Midi ink jet coder - manufacturer website - www.linx.co.uk 



356 Adpack STR40-20 heat shrink tunnel 

357 Loma Superscan Micro metal detector aperture 350mm x 120mm 

358 Loma 6000 series check weigher metal detector combination system aperture 

460mm x 100mm 

14


358a 

358b 

Loma Superscan S metal detector on elevated conveyor frame aperture 

350mm x 150mm (s/n 285720) 

Flighted neoprene belt conveyor with integral Loma IQ metal detector aperture 

650mm x 200 

359 Domino Solo 5/5 Auto ink jet coder 



362 OK International Model OK200 644-92 bag de-cuffer and folder for boxes with bags 

inserted/filled, handles boxes approx 12in x 12in x 12in or smaller with Markem 

Smartdate 2 coder (s/n 984849) - manufacturer website - www.emrich.com.au 



Smartdate 2 coder (s/n 981019) - manufacturer website - www.emrich.com.au 



Smartdate 2 coder 

365 Cintex metal detector aperture 350mm x 100mm alarm bell & stop - 


366 Domino Solo 6 ink jet coder (JL2755) - manufacturer website - www.domino-printing.com 

367 Domino Solo 6 ink jet coder (JL2634) - manufacturer website - www.domino-printing.com 

368 Line 5 packing line comprising Ling in-feed conveyor system, Otem MACH 200 

stainless steel flow wrapper and a Ling narrow stainless steel heat shrink tunnel 

(s/n 116) - manufacturer website - www.ctpack.com/ 










372 Digi HC3600E weigh price labeller 

373 Metal detector head 450mm x 230mm aperture 

374 CEIA THS ferrous / non ferrous metal detector aperture 660mm x 150mm complete 

with out feed S bend conveyor 

375 Inter Dibipack Ecopack 600SA heat shrink tunnel 

376 Cormarme GEM X35 carton taper 

377 Marko Tech LM230 top labeller 

378 Loma metal detector 310mm x 180mm 

379 Loma check weigh station with reject arm (s/n 6048) - 











384 Domino Solo 6 IP65 ink jet coder - manufacturer website - www.domino-printing.com 

385 Stork SL25 internal case packer complete with Stork C1000 pallitiser with Norprint hot 

glue head and pallet feed unit - manufacturer website - www.fds.storkgroup.com 


glue head and pallet feed unit - manufacturer website - ww.fds.storkgroup.com 



15







glue head and pallet feed unit - manufacturer website - ww.fds.storkgroup.com 



392 Stainless steel baker’s trolley holds trays 740 x 460mm sold in set of 5 trolleys 

(total 20 lots available) 

393 Galvanised bakers trolley holds trays 740 x 460mm sold in set of 10 trolleys 

(total 13 lots available) 

394 Portable stainless steel perforated trolley (total 15 lots available) 

395 Portable stainless steel trolley (8 lots available) 

396 Stacking bread tray 760mm x 600mm x 170mm approximately 30 per dolly 

(70 lots available) 

397 Dynoplast heavy duty plastic tub 35 tubs per pallet (26 pallets available) 

398 Pallet off wire baskets 750mm x 450mm x 110mm 40 wires per pallet 

(55 pallets available) 

399 Pallet off plastic bread trays 750mm x 450mm x 100mm 45 trays per pallet 


PIZZA EQUIPMENT 

400 Lawrence Equipment - Tortilla, Corn Chip, Pizza, Roti, Flatbread production line 9 

across / 5 out (model 055030303 s/n SS018) including 36 x 36 Legend press on 

stainless frame model FP363607 (s/n FP410 YOM 1999) - manufacturer website - 

www.lawrenceequipment.com 

400a Newtec 2012B onion grader 

401 Raque waterfall type depositor for shredded cheese pizza toppings, depositor uses 

rotary rake type action to evenly deposit topping particles onto pizzas complete with in 

feed and intermittent conveyor system line H32-540-80 (s/n 90239C) - 

manufacturer website - www.raque.com 


rotary rake type action to evenly deposit topping particles onto pizzas - 




feed and intermittent conveyor system line H13-006-10 (s/n 0902000) - 


404 Raque waterfall type depositor for shredded cheese pizza toppings, depositor 

uses rotary rake type action to evenly deposit topping particles onto pizzas 

complete with in feed and intermittent conveyor system line U32-45C-AO (s/n 902330) 

- manufacturer website - www.raque.com 

405 Stainless steel twin paddle blender 400ltr capacity 

406 Kaufler Brevete P9251 three head stacking pendulum slicer (s/n 10014) - 

manufacturer website - www.kaufler.com/ 

407 Kaufler Brevete P9251 three head stacking pendulum slicer (s/n 10014) - 

manufacturer website - www.kaufler.com/ 

408 Rutland product handling conveyor 400mm wide belt (s/n 49002) - 

manufacturer website - www.sawfordengineering.co.uk 

409 Rutland product handling conveyor 400mm wide belt (s/n 49004) - 

manufacturer website - www.sawfordengineering.co.uk 

410 APV Pizza Press hydraulic cold press (269-1) - manufacturer website - www.apv.com 

411 APV Pizza press die set platens for 5” / 9” pizzas - 

manufacturer website - www.apv.com 

412 Portec 270 spiral neoprene belt conveyor 400mm wide belt 

413 Portec 270 spiral neoprene belt conveyor 400mm wide belt 

16


414 Portec 270 spiral neoprene belt conveyor 400mm wide belt with 2 x Cesco magnet 

heads - manufacturer website - www.portec.com 

415 Portec 270 spiral neoprene belt conveyor 400mm wide belt with 2 x Cesco magnet 

heads - manufacturer website - www.portec.com 

416 Alstom Lieder type RCF02 type 6 static pizza sauce depositor border free style 

depositor six head depositing unit including CIP system - 

manufacturer website - www.robotfoodtech.com 

416a 

416b 

416c 

416d 

416e 

416f 

416g 

416h 

416i 

Stainless steel bucket elevator 200mm wide belt with feed hopper 

Internal bulk powder hopper 

Stainless steel frame Introlox belt conveyor 300mm x 2mtr 

Neoprene belt conveyor 300mm x 2mtr 

Neoprene belt inclined conveyor 300mm x 2mtr 

Neoprene belt inclined conveyor 300mm x 2mtr 

Wright Pugson TCO cutter (s/n J5118TCO) 

Stainless steel dimple pan vibratory conveyor 600mm wide x 2.1mtr 

Inclined neoprene conveyor 300mm x 1400mm 

416j Neoprene belt conveyor 600mm x 3mtr 

417 Alstom Lieder type CIL 9200 static pizza sauce depositor border free style depositor 

six head depositing unit including CIP system - 

manufacturer website - www.robotfoodtech.com 

417a Stainless framed four head trough depositor 

417b Neoprene belt conveyor 600mm x 4mtr 

417c Neoprene belt conveyor 900mm x 2mtr 

417d Raque depositing line comprising in-feed and out-feed band conveyors inline six head 

depositor and 2 x Raque PF2-5-.6 six head piston depositors 



feed and intermittent conveyor system line U32-45C-AO (s/n 902330) - 


419 Raque four head pizza topping depositor 

420 Anglia Autoflow pizza base spiker 

421 Wright Pugson cheese cutter 

421a Pizza press platens on trolleys 

422 Pallet off pizza tray 6” French stick style platen tray for APV hydraulic pizza press 


423 Pallet off pizza tray 5” pizza platen tray for APV hydraulic pizza press (1 pallet available) 

424 Pallet off pizza tray 9” pizza platen tray for APV hydraulic pizza press 










429 Pallet off pizza tray 4” deep pan pizza platen tray for APV hydraulic pizza press 


430 Pallet off pizza tray 5” deep pan pizza platen tray for APV hydraulic pizza press 




432 Fully guarded stainless steel 250kg hoist model LPX040 

433 Acrivan six rack ambient air cooler all stainless steel (s/n 10768) 

17


PIZZA SAUCE PLANT - GRIMSBY 

433a Giusti 250ltr jacketed vacuum cooking kettle with vacuum pump (s/n 010650) 

433b Procip Process Systems Ltd stainless steel sauce manufacturing plant comprising 

500ltr stainless steel mixing vessel with Silverson shear mixer and stainless steel 

750ltr holding vessel with agitation 

433c Procip Process Systems Ltd stainless steel sauce manufacturing plant comprising 



433d Procip Process Systems Ltd stainless steel sauce manufacturing plant comprising 



433e Procip Process Systems Ltd stainless steel 500ltr blend tank with agitation 

433f Procip Process Systems Ltd stainless steel 1500ltr silo with agitation 

433g Procip Process Systems Ltd stainless steel 1500ltr silo with agitation 

433h Collective bid on lots 433a to 433g inclusive as detailed above 

TEST KITCHEN 

433a Rondo FTM503 table top pastry brake 

434 Seewer Rondo STM53 bench top pastry brake (s/n 15082006) - 

manufacturer website - www.rondodoge.com 

435 Riggs Autofill portable depositor 

436 Mondofill piston portable depositor 

437 Apple Meteorite depositor (s/n MM243396) 

438 Portable electric tipping mixer 

439 Eurofours four tray electric oven 

440 Tom Chandley CPMK4 Compacta four deck electric oven - 


441 Cowie & Riding model CR twin whipping machine 

442 Tom Chandley R512 intermediate retarder proover 17 tray - 


443 Skerman prototype test mixer 100ltr bowl (s/n NS1504) - 


444 Doman 10litre portable boiler with pump 

445 Plant PL25 20 quart bench planetary mixer 

446 2 x electric microwave ovens and twin plate boiling top 

447 Crypto Peerless Handomatic pie press (s/n 194362) - 

manufacturer website - www.crypto-peerless.com 

448 Crypto Peerless Handomatic pie press 

449 Avery DX432 15kg bench scale 






455 Avery FX220 15kg bench scale 






461 Stevens bench scale 15kg capacity 

462 Salter SIB 30kg bench scale 

463 Stainless steel preparation table 1800mm x 750mm 

464 2 x Hobart table top batch mixers 

18


465 Portable ingredients trolley on stainless frame for holding multiple test ingredients 

466 Portable ingredients trolley on stainless frame for holding multiple test ingredients 


SPIRAL FREEZERS / COOLERS / REFRIGERATION 

467 Kerry Kerritrack eleven tier spiral Danish cooler complete with gantry and associated 

compressor packs with Kilmatechnik heat exchanger 

468 Frigo Scandia Gyro Compact GC M 76 08 35 18 spiral freezer belt 720mm x 70mm 

pitch (s/n 530001) - manufacturer website - www.jbtcorporation.com/ 







472 Frigo Scandia Gyro Compact GC M 64 08 40 16 spiral freezer (s/n 520001) - 

manufacturer website - www.jbtcorporation.com/ 

473 Frigo Scandia Gyro Compact GC M 76 08 40 18 spiral freezer (s/n 530031) - 

manufacturer website - www.jbtcorporation.com/ 

473a 

473b 

Frigo Scandia Gyro Compact GC M 92 12 25 20 spiral freezer belt 880mm x 110mm 

pitch (dismantled - ready to load) 

Frigo Scandia Gyro Compact GC M 76 08 35 18 spiral freezer belt 720mm x 70mm 

pitch (dismantled - ready to load) 

474 Danish retarder room refrigeration pack comprising compressor and four evaporators 

475 Danish retarder room refrigeration pack comprising compressor and four evaporators 

476 Egg chill room refrigeration compressor and three six fan evaporator units 

477 Butter chill room refrigeration compressor and two six fan evaporator units 

478 Chill room 1 refrigeration compressor and Searle twin fan evaporator unit 

479 Cold store comprising four twin fan evaporators and Baltimore water cool condenser 

unit (s/n 841615H) 

480 Cream chill room refrigeration compressor and 1 x six fan and 2 x two fan evaporator units 

481 High care chill room 2 refrigeration compressor and two three fan evaporator units 

482 Chill room 2 refrigeration compressor and two three fan evaporator units 

483 Modular free standing chiller cabinet 3m x 1.5m x 2.5m 

484 Modular free standing chiller cabinet 2m x 1.5m x 2.5m 

485 High care chill room 2 refrigeration compressor and two, fan evaporator units 

486 Chill room 3 refrigeration compressor and one twin fan evaporator units 

487 Chill room 5 refrigeration compressor and triple fan evaporator unit 

488 Chill room 6 refrigeration compressor and two four fan evaporator units 

489 Modular walk through cooling tunnel eight fan cooling overall dimensions 3500 mm x 

7500mm holds approximately 30 racks 

490 Modular walk through cooling tunnel fourteen fan cooling overall dimensions 

3500 mm x 3500mm holds approximately 5 racks 

491 Danish room chill room refrigeration compressor and Cobal two fan CR44 PINT 

evaporator 

491a APV Hall refrigeration screw compressor on R22 complete with control panel 

(s/n A105598) - manufacturer website - www.apv.com 

491b APV Hall refrigeration screw compressor on R22 complete with control panel 


491c APV Hall refrigeration screw compressor on R22 complete with control panel 

(s/n A10557X) - manufacturer website - www.apv.com 

491d APV Hall refrigeration screw compressor on R22 complete with control panel 


491e APV Hall refrigeration screw compressor on R22 complete with control panel 


19


491f 

APV Hall refrigeration screw compressor on R22 complete with control panel 

(s/n A10557X) - manufacturer website - www.apv.com 

491g Grasso skid mounted DV49 refrigeration compressor pack (s/n 983265) - 

manufacturer website - www.grasso.co.uk 

491h Newton Tesla high pressure water control system tank and pump - 

manufacturer website - www.newton-tesla.com 

491i York rotary screw refrigeration compressor pack on R22 type TDSH233 (s/n L1455F) - 

manufacturer website - www.york.com 

491j 

491k 

UK Engineering ammonia plant surge drum 

Ammonia plant soft surge drum with associate pumps 

AIR HANDLING / FRIDGE PLANT / BOILER 

492 Ingersoll Rand SSR ML55 packaged air compressor - 




494 Ingersoll Rand TMS air dryer - manufacturer website - www.ingersollrand.com 

495 Comp Air Cyclon 337 packaged air compressor (F167/0399) - 

manufacturer website - www.compair.com 

496 Broomwade D9A air dryer (s/n, 901392) - manufacturer website - www.compair.com 



498 Bellis & Morecam CAD650 air dryer 



500 Ingersoll Rand TMS air dryer - manufacturer website - www.ingersollrand.com 

501 RJ Mellor ten point central lubrications system comprising 400ltr oil tank, pneumatic 

pump control panel and monitor - manufacturer website - www.rjmellor.co.uk 

502 Packaged screw compressor set Gram F20K refrigeration compressor with 160kw 

motor and ammonia surge drum (s/n 759193005-13319) 

503 Grasso refrigeration compressor set model 65281 with 290kw motor complete with 

ammonia surge drum (s/n 5829) 

504 Grasso refrigeration compressor set model L3 with 104 kw motor complete with 

ammonia surge drum s/n L0224/409413 YOM 1996) - 

manufacturer website - www.grasso.co.uk 

505 Montgomery Refrigeration skid mounted refrigeration pack comprising 4 x skid mount 

Bitzer compressors - manufacturer website - www.montgomery-ltd.co.uk 

506 Grasso RC6312 skid mounted refrigeration pack R22 with drum control panel and 

pumps manufactured by Cryotech - manufacturer website - www.grasso.co.uk 

507 BIB Cochran Minster steam raising boiler 3500lb per hr with Fosse water softening 

plant and hot well (s/n 10479 YOM 1995) - 

manufacturer website - www.bibcochran.com 

LABORATORY 

508 Elga Option 3 wall mounted purifier complete with Elga 75 litre purified water reservoir 

- manufacturer website - www.elgalabwater.com 

509 Seward blender stomacher 400 mixer (s/n 25446) - 

manufacturer website - www.seward.co.uk 

510 Gallenkamp cooled incubator cabinet - 

manufacturer website - www.weiss-gallenkamp.com 

511 Grant W28 thermostatic incubator cabinet - manufacturer website - 

www.grantsousvide.com/ 

512 Grant W14 thermostatic bath circulatory - 

manufacturer website - www.grantsousvide.com/ 

513 Grant Y38 thermostatic bath circulatory - 

manufacturer website - www.grantsousvide.com/ 

514 Prior Clave tactrol autoclave machine Type P5/LAC/EV100 

20


515 Chiltern magnifying colony counter 

516 Stuart Scientific colony counter - manufacturer website - www.Stuart-Equipment.co.uk 

517 Status thermostatic bath circulatory 

518 Quantity of ancillary laboratory equipment beakers, jugs, pipettes & disposables etc 


WORKSHOP & ENGINEERS 

519 Ajax twin disk DS9200 bench grinder (s/n 0997) - 

manufacturer website - www.ajax-mach.co.uk 

520 Nutool LT16J pillar drill - manufacturer website - www.nutool.co.uk 

521 Metabo twin disc bench grinder model 7211W (s/n 739007) - 

manufacturer website - www.metabo.co.uk 

522 RL twin disc bench grinder model TN.6G (s/n 3076) 

523 Murex Transarc DC135 portable welder - 

manufacturer website - www.murexwelding.co.uk 

524 Portamig Porta Plasma 30-60 welder 

525 Portamig JLX250 compact welder (s/n 0102989) 

526 Makita 2414 portable electric cut off saw - manufacturer website - www.makitauk.com 


SILO / STORAGE 

527 Wincanton Engineering jacketed bulk fats storage tank and fat pump (s/n 4511) 

528 J T Scotney mild steel 25 ton sugar silo with Defiant in line weighing system 

(s/n S9432931) - manufacturer website - www.scotney.co.uk 

529 30 ton bulk sucrose silo and pump 

530 Collinson M15 bulk flow bags with flowveyors and pump complete with Russell Finex 

sieve x 2 - manufacturer website - www.collinson.co.uk 

530a Russell Finex sieve 600mm diameter 

530b Russell Finex sieve 900mm diameter 

530c Holmes type HR flour blower 

530d Holmes type HR flour blower 

530f Kerry remote CIP belt washing system 

530g 30 ton silo unit 

530h 30 ton silo unit 

TRAILERS 

531 Montracon MPTRAW2SCL 35 ton trailer 13.8m long trailer unit AX221150 - 

manufacturer website - www.montracon.com 

532 Montracon MPTRAW2SCL 35 ton trailer 13.8m long trailer unit AX221189 - 


533 Craven Tasker Fruehauf 34.5 ton trailer 13.0m long trailer unit AX285135 - 


534 Craven Tasker Fruehauf CMPJG2A2W 34.5 ton trailer 13.0m long & Craven Tasker 

GT10406BV 34.5 ton trailer 13.2m long trailer unit A113202 / T708 - 


535 Montracon MP7RAW2SCL 35 ton trailer 13.8m long trailer unit AX721213 - 


536 Craven Tasker Fruehauf TG704066BB 34.5 ton trailer 13.0m long trailer unit A730/263 

- manufacturer website - www.montracon.com 

537 Craven Tasker Fruehauf GT10406BV 34.5 ton trailer 13.0m long trailer unit 

A100673/CSR941 - manufacturer website - www.montracon.com 

538 Craven Tasker Fruehauf GT10406BV 34.5 ton trailer 13.0m long trailer unit A728 - 


539 Montracon MRAW250N 35 ton trailer 13.6m long trailer unit AX721215 - 


21




541 Craven Tasker Fruehauf GT10406BV 34.5 ton trailer 13.0m long trailer unit A720 

(NXT) - manufacturer website - www.montracon.com 

542 Montracon MRAW250N 35 ton trailer 13.6m long trailer unit AX221190 - manufacturer 

website - www.montracon.com 

543 Montracon MPTRAW25CL 35 ton trailer 13.6m long trailer unit AX221195 - 


544 Craven Tasker Fruehauf GT10406BV 34.5 ton trailer 13.0m long trailer unit AX285131 

- manufacturer website - www.montracon.com 











550 Craven Tasker Fruehauf GT10406BV 34.5 ton trailer 13.0m long trailer unit 

A285121/GR570 - manufacturer website - www.montracon.com 







554 Montracon W10199 35 ton trailer 13.6m long trailer unit AX221163 - 












560 Cherau Eurogcm 247 35 ton trailer 13.5m long with Thermoking XLT260 refrigeration 

pack trailer unit A736 - manufacturer website - 

OFFICE FURNITURE / CANTEEN 

700 Content of office room comprising movable furniture off cupboards, filing cabinets & trays 

701 Content of office room comprising movable furniture off desks chairs & cupboards 


703 Rexel 2250 Auto paper shredder - manufacturer website - www.rexel.com 




707 Content of medical room / occupational health room 

708 Elcold chest freezers x 4 in staff shop - manufacturer website - www.elcold.com 


710 Content of group office room comprising movable furniture off desks chairs & cupboards 


22



713 Content of office room comprising movable furniture off desks chairs cupboards and 

office safe 

714 Kyocera KM3035 photocopier - manufacturer website - www.kyocera.co.uk/ 








721 Hobart AMX commercial dish washer - manufacturer website - www.hobartuk.com 

722 Electrolux WT38 UK dishwasher (new in box) - 

manufacturer website - www.electrolux.co.uk 

723 Contents of staff canteen kitchen comprising ranges, Hobart cooker, 4 x upright 

chillers, fryer salamander and associated tables sinks and racks - 


724 Canteen servery counter comprising serve over counter with hot wells, griddles and 

warming cabinets - manufacturer website - 

725 Canteen table with four chairs (56 lots available) 

726 Klix Systems 1200.5.0 multi vending beverage dispenser 

727 Klix Systems 1200.5.0 multi vending beverage dispenser 

728 Polyvend model 453 chocolate / confection vending machine 

729 Vendo VDI 189-5 drinks vending machine 

730 Zanussi Wittenborg 955589 sandwich vending machine 


End of Sale 





23

Location of Auction: 

Nearest Airport: 

Humberside 

33 miles 

Nearest Railway 

Station: 

Bridlington 3 miles 

Nearest Motorway 

Junction: 

M62 and A1(M) 

FORMER GLOBAL CAKE LTD 

Carnaby Industrial Estate 

Bridlington 

East Yorkshire YO15 3QY 

Contact the auctioneers 

for further information 

and to request a 

catalogue: 

Pro Auction 

Limited 

Unit 5, 

Midsomer Enterprise Park, 

Radstock Road, 

Bath BA1 6LD 

United Kingdom 

Tel: +44(0)1761 414000 

Fax: +44(0)845 280 2492 

Email: 

info@proauction.ltd.uk 

Website: 

www.proauction.ltd.uk 


Surplus asset? 

Call us for a free 

valuation and to 

organise your next sale 

PLEASE NOTE: 

Commission and telephone bids 

by arrangement only. 

An effective way 

to maximise 

realisation on 

redundant assets, 

call the experts 

today 

Guaranteed 

Results!! 

SALIENT INFORMATION: 

• Identification is required 

to enable allocation of a 

bidding card. 

• All capacities, dimensions 

and dates of manufacture 

are approximate and 

potential purchasers should 

make their own inspection 

& enquiries for verification. 

• All bids are subject to 

applicable VAT 17.5% and 

a buyers premium of 15% + 

VAT. 

• Payment is required on day 

of the sale unless prior 

arrangements have been 

agreed. Funds must be 

cleared before collection 

of goods.

Sale Catalogue - Pro Auction

Create successful ePaper yourself

Delete template?

Save as template?