Inch Series
Inch Series
Inch Series
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
www.bergab.ru Берг АБ bergab@ya.ru Тел. (495)-228-06-21, факс (495) 223-3071<br />
MINI RAIL ® LS/MS SERIES•Miniature Lead Screw-Driven Slides<br />
PRODUCT OVERVIEW<br />
Based on Pacific Bearing Company’s proven Simplicity technology. Mini-Rail miniature linear guides provide smooth and quiet<br />
linear motion. The self-lubricating design requires no sealing, emits virtually no particulates, tolerates high temperature extremes<br />
and has no rolling elements that can cause catastrophic failure.<br />
An economical alternative to conventional miniature linear guides, Mini-Rail requires no maintenance, is interchangeable with<br />
industry standard sizes.<br />
TECHNICAL DATA<br />
Ceramic coated rails and carriages are corrosion resistant. FrelonGold ® self-lubricating liner delivers the best overall<br />
performance, the highest loads, the best wear life, and speeds.<br />
MINI RAIL ®<br />
MS SERIES<br />
MINI RAIL ®<br />
LS SERIES<br />
• Robust design - outstanding<br />
reliability<br />
• Fewer parts - less maintenance<br />
• Three (3) leads available<br />
• Integral screw<br />
• Low cost<br />
• High torque stepper motor (NEMA 17)<br />
• Preloaded drive nut - eliminates backlash<br />
• Lengths up to 640 mm<br />
• Ball bearing supports<br />
• Optional hand brake<br />
60<br />
20<br />
TYP<br />
TYP<br />
51<br />
62<br />
38<br />
38<br />
• Right hand rolled thread<br />
• 303 stainless steel screw with<br />
TFE coating<br />
• Self-lubricating Polyacetal,<br />
anti-backlash nut<br />
• Lengths up to 640 mm<br />
• Three (3) leads available<br />
• Optional hand brake<br />
20<br />
TYP<br />
60<br />
TYP 62<br />
38<br />
38<br />
MINI RAIL ®<br />
MOUNTING HOLES FOR M5 SCREWS<br />
M4 TAPPED HOLES<br />
42.2<br />
34<br />
160<br />
10<br />
42.2<br />
6.4<br />
MOUNTING HOLES FOR M5 SCREWS<br />
M4TAPPED HOLES<br />
160<br />
46.0<br />
10<br />
24.8<br />
6.4<br />
NOTE: Unless otherwise specified, mounting holes will be centered.<br />
NOTE: Unless otherwise specified, mounting holes will be centered.<br />
MINI RAIL ®<br />
LS/MS SPECIFICATIONS<br />
Bipolar • Chopper Drive • 100% Duty Cycle,<br />
5.54mm (0.218") Lead Screw<br />
THRUST (lbs.)<br />
100<br />
90<br />
80<br />
70<br />
60<br />
50<br />
40<br />
30<br />
20<br />
10<br />
0<br />
.00012<br />
.00024<br />
.00048<br />
.00096<br />
.00192<br />
RECOMMENDED LOAD LIMIT<br />
400<br />
350<br />
300<br />
250<br />
200<br />
150<br />
100<br />
50<br />
0<br />
THRUST(N)<br />
Size 17 Stepper Motor with 5.54mm (0.218") Screw<br />
LINEAR TRAVEL PER STEP<br />
.001524 mm (.00006")<br />
.003048 mm (.00012")<br />
.006096 mm (.00024")<br />
.012192 mm (.00048")<br />
.024384 mm (.00096")<br />
.048768 mm (.00192")<br />
NOTES: Rail ends are NOT coated. Fully coated rails are available upon<br />
request. CAD files can be downloaded from our website at<br />
www.pacific-bearing.com.<br />
0 200 400 600 800 1000 1200 1400 1600 1800<br />
SPEED (full steps/sec.)<br />
WWW.PACIFIC-BEARING.COM Ordering Information on Page 9<br />
7<br />
www.bergab.ru Берг АБ bergab@ya.ru Тел. (495)-228-06-21, факс (495) 223-3071
Change language