Cooled Injection System CIS 6

Cooling Options
4
1 LN 2
Cooling
For applications with injection temperatures up to - 150 °C. The Dewar vessel
required for this purpose can also be provide by GERSTEL.
2 LCO 2
Cooling
For applications with injection temperatures up to - 50 °C.
3 Cryostat Cooling
Preferably for applications with injection temperatures up to - 40 °C, for which a
Peltier cooling system is not sufficient, but for which cooling with LCO 2
or LN 2
is
not required. Peltier and cryostat cooling systems can be upgraded with an LN 2
-
option.
4 Patented Peltier Cooling
Preferably for applications with injection temperatures up to + 30 °C (with an
initial oven temperature of 60 °C), for which cooling with LCO 2
or LN 2
is not required.
Technical Data on CIS 6
Temperatur
emperature e ranges
with LN 2
cooling – 150 to + 650 °C
with LCO 2
cooling – 50 to + 650 °C
with cryostat cooling – 40 to + 650 °C
with Peltier cooling + 30 to + 650 °C *
Heating rate
Split-flow
0,5 to 18 °/s
adjustable to 400 ml/min,
depending on the type of
carrier gas and GC
GERSTEL Controller 506
The Controller 506 is a permanent feature
of every CIS 6 and controls all
GERSTEL modules.
Transfer modes
Split/split-less
Solvent Venting
Solvent Venting
with stop-flow
LAN interface Suitable for networks
* at 60°C initial oven temperature
GERSTEL MAESTRO Software
The proven GERSTEL MAESTRO Software provides a comfortable means of
controlling the CIS 6 and the GERSTEL modules. This software is compatible
with MS Windows 2000/XP and has automatic hardware recognition
Information, descriptions and specifications in this
publication are subject to change without notice.
GERSTEL, GRAPHPACK and TWISTER are registered
tradenames of GERSTEL GmbH & Co. KG.
© Copyright by GERSTEL GmbH & Co. KG