SYSTEMS

Info

8 BASE GRILLE SERIES 800 STAINLESS STEEL 866-391-6216 www.base-spec.com info@base-spec.com P: 651-463-2273 F: 651-463-2320 l Look and feel of stainless steel l Long-lasting entrance system l 3 heights: 3/8 " , 5/8 " , 9/8 " l Durable welded construction l Supports foot and cart traffic Base 800 Series Stainless Steel Grille systems make a stunning first impression in building entryways. Built to last, Base Grilles maintain a “like new” look through the four seasons and throughout years of service. Surface beams and cross struts are robot welded at each intersection to assure longevity and a positive appearance in your application. Base Stainless Steel Grilles enhance building appearance Base Grilles help keep buildings clean, cut floor maintenance costs and provide an aesthetic touch to any building. Dirt and soilage drop through the voids and concentrate in the grille recess. Custodians simply lift a grille section and vacuum up dirt and debris. Grilles have lockdowns — removal and replacement are easy. Available in three heights (3/8", 5/8" and 9/8"). SPECIFICATIONS Subject to change without notice Material: Stainless steel with support bars spaced 1” apart for maximum load capacity Construction: Surface wires .093” (2.4 mm) by 0.156” (4 mm) with 0.70” (1.8 mm) support bars spaced 1” (24mm) o.c. Spacing between rails shall be 0.140” (3.6 mm) Tread finish: Satin, stainless steel LEED: MR credits 4.1, 4.2 – recycled content; EQ credit 5 3/8" Grille (SS- 838) 5/8" Grille (SS-858) 9/8" Grille (SS-898) 1/8" A “L” series frame available for recess applications – for use on all four sides of grille B Frame: A=1/2" / B=3/4" Frame: A=3/4" / B=3/4" Frame: A=1-1/4" / B=1-1/4"
BASE REVERS-A-GRID SERIES 900 FOR HEAVY TRAFFIC AREAS l Reversible – flips top to bottom l Long lasting – doubles grid life l Buffed rubber wiper bars with raised aluminum scraper strips l Supports foot and cart traffic 866-391-6216 www.base-spec.com info@base-spec.com P: 651-463-2273 F: 651-463-2320 Base Revers-A-Grid scrapes debris and absorbs moisture REVERSIBLE for long life 9 Base 900 Series Revers-A-Grid combines absorbent buffed rubber wiper bars with raised aluminum scraper strips – top and bottom. Grid can be reversed – doubles mat life. Functions in surface and recessed applications – indoors and out. Insert colors: gray or black. See L-4 frame option (right) for recess applications. B-2 ramp option (right) for surface applications. Connector strip joins sections. SPECIFICATIONS Subject to change without notice Dimensions Surface application 1-3/8" 1-1/8" 1-1/8" 7/16" 7/16" Material: Alternating strips of scraper bars (aluminum) and wiper bars (buffed or unbuffed rubber) Design: Gray or black rubber wiper bars Depth: 15/32” LEED: Possible LEED-NC credits; MR credit 4 (1-2 points); IEQ credit 5 (1 point) Recycle content: 25% pre-consumer, 75% post-consumer Sizes: Custom made to your specifications Shallow recess application FINISHED FLOOR CONCRETE 1-1/8" 7/16" L4 FRAME CONCRETE 1-3/8" B-2 aluminum ramp for surface applications 3/8" 1/2" L-4 frame available for recess applications – for use on all four sides of Revers-A-Grid 1-1/2" 1/2" Connector strip (inverted “T”) joins sections – for use on traffic direction abutments 1" Colors Gray Black
Page 1 and 2: Established 2003 ENTRANCE PROTECTIO
Page 3 and 4: 3 866-391-6216 www.base-spec.com in
Page 5 and 6: 5 866-391-6216 www.base-spec.com in
Page 7: 7 866-391-6216 www.base-spec.com in
Page 11 and 12: 11 866-391-6216 www.base-spec.com i

SYSTEMS

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?