Excavators without tilt- rotators - Engcon
Excavators without tilt- rotators - Engcon
Excavators without tilt- rotators - Engcon
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Precision work<br />
with a <strong>tilt</strong>rotator<br />
Martin Karlsson digs out the petrol and<br />
diesel tanks and pipes for the pumps<br />
with the utmost care and precision.<br />
“It’s quite complicated since the<br />
pipes run in all directions. The job<br />
would be impossible <strong>without</strong> a <strong>tilt</strong>rotator,”<br />
he says emphatically.<br />
When the new Coop Forum supermarket was<br />
being built in Ulricehamn, it turned out the<br />
Uno X petrol station was too close and needed<br />
to be moved. Lasses Entreprenad AB in Frillesås<br />
was hired to do the excavation work. The three<br />
fuel tanks could stay where they were, but the<br />
pipes and pumps needed moving slightly.<br />
Martin joined the company in January this<br />
year. Not only was he given an exciting task<br />
straight away – he also got to operate a brand<br />
new Komatsu PC138 fitted with an engcon<br />
EC15.<br />
“It’s my first new machine, so it was a very<br />
special feeling,” he says.<br />
Demanding job<br />
The excavation work lasted almost two weeks.<br />
It took slightly longer than expected because<br />
leaked diesel was found in the ground and had<br />
to be cleaned up.<br />
The actual excavation work was also demanding.<br />
It involved digging up the existing<br />
pipes that needed to be moved, as well as uncovering<br />
the upper side of the tanks so that<br />
new pipes could be installed to the new distribution<br />
point.<br />
engcon <strong>tilt</strong><strong>rotators</strong><br />
the trend<br />
6<br />
“There were five pipes attached to each underground<br />
tank. It was quite complicated, and<br />
would have been impossible <strong>without</strong> the <strong>tilt</strong>rotator,”<br />
says Martin.<br />
For Lars Gustavsson, who founded Lasses<br />
Entreprenad in 1990, <strong>tilt</strong><strong>rotators</strong> are a must on<br />
excavators. He has a total of twelve excavators<br />
– mainly Komatsus – and ten of them are fitted<br />
with engcon <strong>tilt</strong><strong>rotators</strong>.<br />
“They range from EC05 to EC30. The only<br />
Jemab in Jönköping has worked with construction<br />
and ground installation for over 40 years. A lot has<br />
happened in that time – and Mats Davidsson, machine<br />
supervisor at Jemab, sees a clear trend.<br />
“Tilt<strong>rotators</strong> will soon be standard on excavators<br />
weighing up to 25 tonnes,” he says. “They’re a must<br />
for machine owners and a requirement from clients.”<br />
excavators <strong>without</strong> <strong>tilt</strong><strong>rotators</strong> are my two<br />
smallest ones, Takejob, but they’ll soon be getting<br />
<strong>tilt</strong><strong>rotators</strong> too,” says Lars.<br />
The company has just over 15 employees. It<br />
does a wide range of work, but specialises in<br />
road and railway works, service operations,<br />
drainage and ground levelling. engcon <strong>tilt</strong><strong>rotators</strong><br />
are a given choice.<br />
“The equipment itself is great,” says Lasse.<br />
“But what’s equally important is that engcon’s<br />
Jönköpings Entreprenad & Markbyggnad AB,<br />
commonly known as Jemab, was founded in<br />
1966. Today the company is a large, well-established<br />
actor in central and south Sweden,<br />
with roughly 40 employees. Although the business<br />
has several strings to its bow, roughly 70%<br />
of the parent company’s business consists of<br />
renting out machines with operators, and the<br />
rest consists of contract work. The company’s<br />
subsidiary, Jemab Rent, rents out smaller construction<br />
machines (up to 10 tonnes) <strong>without</strong><br />
operators.<br />
“In Jemab and Jemab Rent, we have about<br />
ten excavators fitted with <strong>tilt</strong><strong>rotators</strong> ranging<br />
from the engcon EC02 to the engcon EC30,”<br />
says Mats.<br />
“We’ve been using engcon <strong>tilt</strong><strong>rotators</strong> for<br />
five years. They’re reliable, and engcon has an<br />
excellent aftermarket organisation for service<br />
and spare parts. This is extremely important,<br />
since time is money.”<br />
The parent company, Jemab, has 22 con-<br />
“engcon makes great equipment, and their service is by<br />
far the best,” says Martin Karlsson, who uses engcon<br />
<strong>tilt</strong><strong>rotators</strong> in all sizes from EC05 to EC30.<br />
service is by far the best. Having ready access to<br />
the equipment is crucial. These days you can’t<br />
turn up for a job <strong>without</strong> a <strong>tilt</strong>rotator on your<br />
excavator.”<br />
Chuckling, he adds:<br />
“By the way, I’ve got an engcon vibratory soil<br />
compactor too. That also works like a dream,<br />
but we’ll talk about that another time.”<br />
struction machines and twelve trucks. Its<br />
projects include roadworks, foundation laying,<br />
fine levelling and water and sewerage. The<br />
company’s long list of customers includes<br />
Vägverket Produktion, NCC, PEAB, Jönköping<br />
Municipality and Skanska.<br />
The larger excavators used to be equipped<br />
with a different brand of <strong>tilt</strong>rotator – until<br />
about a year ago when Jemab fitted an engcon<br />
EC30 to a New Holland 305.<br />
“We’ve had excellent experience of engcon<br />
<strong>tilt</strong><strong>rotators</strong> on our smaller machines, and<br />
wanted to try engcon on a large machine. So<br />
far we’re very satisfied,” reports Mats.<br />
He’s convinced that more of their larger machines<br />
will also be equipped with <strong>tilt</strong><strong>rotators</strong> in<br />
future.<br />
“Many jobs like water and sewerage work,<br />
golf courses and reservoirs really can’t be done<br />
<strong>without</strong> a <strong>tilt</strong>rotator. And machine operators<br />
are increasingly expected to do the fine levelling<br />
during earth moving work.”