Global Surfacing - Korkat

Maintenance
Roll Coats
Although Poured-in-Place and Bonded
Rubber are often sold as “no maintenance”
products, they are actually “lower maintenance”
products. No playground safety surfacing is
totally maintenance free. The sun’s rays,
weather and foot traffic all take their toll over
time. That is why we recommend periodically
applying a urethane replacement roll coat. You
will be amazed at how a roll coat can bring
your faded and dried surface back to life.
We believe in the value of roll coating so
much, that we will extend the warranty of your
surfacing as long as the surfacing was
originally installed by us and you subscribe to
our Life Extension Program.
Roll coating your playground is like applying protectant to the
dashboard of your car or applying leather conditioner to its seats.
The more you take care of these surfaces, the longer they will last.
Patch Kits
Over time, wear spots may develop in high traffic areas. When they
do, you might want to consider using a patch kit. This will allow you to
address a small problem before it becomes a large one. Our patch kits
are packaged in five-gallon pails and include pre-measured amounts of
rubber and binder. All you need to do is mix the ingredients and apply
the patch. Instructions are included as well as phone support.
Safety
Critical Fall Height
Surfacing Thickness in Inches
No Fall
Area
Up to
4 ft.
Up to
6 ft.
Up to
8 ft.
Up to
10 ft.
Up to
12 ft.
Service
Support from
the Ground Up
All of our playground safety
surfacing products are designed
and manufactured with
long-term performance in mind.
No matter which system you
select from us, you can be
assured that safety, quality and
customer satisfaction are our
highest priorities. All of our
playground safety surfacing
products include a written
warranty and we are always here
to support you before, during
and after the job is complete.