SAE 2008 Alternate Refrigerant Systems ... - SAE International
SAE 2008 Alternate Refrigerant Systems ... - SAE International
SAE 2008 Alternate Refrigerant Systems ... - SAE International
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
speaker biographies<br />
Kenneth Porrett<br />
Staff Engineer<br />
General Motors<br />
Ken Porrett is a Staff Engineer with General Motors<br />
Corporation. Ken began his career with GM in 1990<br />
and has held various positions in Validation and HVAC.<br />
His current assignment is with the Global Technology<br />
Engineering group working on global alternative<br />
refrigerants. Ken has also worked on the development of<br />
fuel economy improvements for mobile air conditioning<br />
systems.<br />
Bruno Rose, PSA<br />
PSA Peugeot Citroën<br />
Bruno Rose studied mechanical & thermodynamics<br />
engineering in the Ecole des Mines in Nantes. From<br />
1998, he worked as an engineering consultant for the<br />
automotive and aircraft industries, designing engine<br />
cooling circuits, air conditioning systems and their control<br />
strategies. Since 2004, he is responsible for the Heating<br />
and Air Conditioning engineering group in PSA Peugeot<br />
Citroën, Vélizy.<br />
Carsten Post<br />
Manager, Application and Development<br />
Hydro Aluminium<br />
Educated as Mechanical Engineer from South Danish<br />
University in 1996. Born in Denmark 1970.<br />
Eight years of experience as application and development<br />
engineer at Hydro Aluminium working with development of<br />
heat exchanger components. Three years in a position as<br />
project manager for developing A/C components specific<br />
for R744 air conditioning systems at Hydro Alunova.<br />
Present in a position as manager for Application and<br />
Development in the manufacturing plant of Hydro<br />
Aluminium in Tonder and since 2002 a core team member<br />
of the Piflex P/S project group<br />
Christophe Proust, INERIS<br />
Senior Scientist and Research Manager<br />
French Institute for Industrail Risk<br />
Dr. Proust is specialized in explosions and manages a<br />
team of students, technicians and engineers on a large<br />
scale experimental site close to Paris. After more than 20<br />
years of experience in the field, a significant body of data<br />
has been gathered concerning all the major aspects of<br />
industrail safety including the formation and the ignition of<br />
explosive atmospheres.<br />
Harald Riegel<br />
Manager Development R744 AC<br />
Behr GmbH & Co.KG<br />
Dr. Riegel is currently Manager Development R744 AC at<br />
Behr. He has a Master in Physics PhD. He is a member of<br />
<strong>SAE</strong>, VDI, and German Physical Society<br />
Eric Scarlett<br />
GM - MPG - HVAC/PTC Development<br />
General Motors<br />
Mr. Scarlett has a BSME from Michigan State<br />
University. He started his working career in 1984 with<br />
Tecumseh Products on refrigerator compressor. In 1989<br />
he joined Ford Motor Company (and later Visteon) were he<br />
worked on compressors and refrigerant systems where he<br />
become a Technical Professional. In 2007 he joined GM in<br />
system development.<br />
Markus Schwerdtfeger<br />
Business Unit Manager Face Seals<br />
KACO GmbH & Co. KG<br />
University degree Engineer (German: “Dipl.-Ing.<br />
Maschinenbau”) I am responsible for running the business<br />
unit “face seals” inside the KACO GmbH. I am a member<br />
of the SABO group; which is a worldwide group of around<br />
4.000 people that develops, manufactures and sells<br />
dynamic seals for automotive and industrial use. I am<br />
responsible worldwide for development, manufacturing<br />
and sales for face seals of our group.<br />
I have a 12 year experience in dynamic seals and for 9<br />
years I have been involved in the development of a shaft<br />
seal for the R744 compressor. For 7 years I have been<br />
responsible for the development of the shaft seal for the<br />
R744 compressor. Our team in Germany has developed<br />
a production ready design for the R744 compressor<br />
shaft seal for various customers worldwide and various<br />
innovative testing equipments to analyze such seals.<br />
16<br />
<strong>SAE</strong> <strong>2008</strong> <strong>Alternate</strong> <strong>Refrigerant</strong> <strong>Systems</strong> Symposium