Cincinnati Brochure - Sampe

Tuesday, May 20
Testing and Test Methods
Session Chair: Don Adams, Wyoming Test Fixtures, Salt Lake City,
UT
Contact Resistance Testing of Expanded Products installed in
Composite Laminate, B. Franada, Fatigue Technology Inc.,
Seattle, WA
Laboratory Testing of FTI Expanded Products in Composite
Joint Applications, J. Ransom, D. Bakken, Fatigue Technology
Inc., Seattle, WA
A Characterization Method for the Time-Temperature-Pressure-Cure
Dependency of the Viscoelastic Bulk Modulus, M.K.
Saraswat, K.M.B. Jansen, L.J. Ernst, Technical University
of Delft, Delft, Netherlands
Using Digital Image Correlation to Acquire Full-field Displacements
and Strains in Carbon Fiber Tensile Tow Experiments
and Modified Iosipescu Shear Specimens, P. Moy, C.A.
Gunnarsson, US Army Research Laboratory, Aberdeen
Proving Ground, MD
Biomaterials
Session Chair: Anton Bowden, Brigham Young University, Salt
Lake City, UT
Development of Hip Joint Stem By Peek/Cf Composite, S.
Bandoh, B.I.TEC Co., Ltd., Kakamigahara City, Japan
Using Ice to Mimic Nacre: From Structural Materials to Artificial
Bon, Invited Speaker: Antoni P. Tomsia, Lawrence Berkeley
National Laboratory, Berkeley, CA
Stimuli-Sensitivity of Poly(N-isopropylacrylamide) Gels Containing
Polymer-Grafted Carbon Microcoils, S. Sato, T.
Yamauchi, N. Tsubokawa, Niigata University, Japan; K.
Kawabe, Y. Hishikawa, S. Motojima, CMC Technology
Development Co. Ltd.
PH Responsive Characteristics of Micro Gel with DNA-Dye
Complex, T. Nishiyama, T. Yamauchi, N. Tsubokawa, N.
University, Japan; Y. Kagami, Chitose Institute of Science
and Technology Chitose, Chitose, Japan
Plasma Treated Polypropylene Fibers Used to Reinforce
Hydrogels for Fibrous Cartilage Applications, J. Holloway, G.
Palmese, A. Lowman, Drexel University, Philadelphia, PA
Characterization of Room Temperature Ionic Liquid Solvent
Based Free Radical Copolymerized Network Gels, J.F.
Stanzione III, G.R. Palmese, Drexel University, Philadelphia,
PA; R.E. Jensen, Army Research Laboratory, Aberdeen
Proving Grounds, MD
Silicon Nitride for Orthopedic Applications, M. Anderson, J.
Bernero, Amedica Corporation, Salt Lake City, UT
Development of Hip Joint Stem by Peek/CF Composite, Shunichi
Bandoh, B.I.TEC Ltd.
10
Aircraft Applications Technologies
Session Chair: Dave Widauf, US Air Force as a Squadron Director,
Hill Air Force Base
Prestressed Carbon / Fiber Thermoplastic Electromagnetic
Railgun (ITAR), A.G. Littlefield, J.B. Root, R.J. Mysliwiec,
US Army RDECOM-ARDEC Benét Laboratories, Watervliet,
NY
Oxidative Wear of C/C Composite Aircraft Brakes at Various
Landing Energy Condition Simulations, S. Ozcan, K.
Peszynska-Bialczyk, P. Filip, Southern Illinois University,
Carbondale, IL
Design, Development, and Analysis of a Hybrid Bistable Structure
for Energy Absorption, S.H. Kim, J. Garcia, V. La
Saponara, University of California, Davis, Davis, CA
Mainlanding Gear Fittings in CFRP, M. Siemetzki, EADS
Deutschland GmbH, Munich, Germany
Thermal Mismatch Issues Between Composite-Aluminum Interfaces
in Aircraft Structural Design, J.J. Tierney, D. Heider,
J.W. Gillespie, Jr., University of Delaware, Newark, DE
Development and Mechanical Properties Verification of VARTM
Composite Full-scale Wing Demonstrator, Y. Hirano, Y. Aoki,
Y. Iwahori, S. Sugimoto, Y. Nagao, APG/Japan Aerospace
Exploration Agency, Japan
Trial Production of Complex Contour Wing Structure Fabricated
by VARTM Technique, Y. Iwahori, Japan Aerospace
Exploration Agency, Japan; N. Uota, Kado Corporation,
Japan
1:00 PM - 5:00 PM
Resin Infusion II
Session Chair: Dirk Heider, University of Delaware, Newark, DE
Aerospace VARTM Processing, D. Heider, UD-CCM, Newark,
DE
Role of Flow Velocity on Preform Saturation in Liquid Composite
Molding Processes, V. Neacsu, J.M. Lawrence, S.G.
Advani, University of Delaware, Newark, DE
Transverse Mobility/Permeability Prediction of Fibrous Porous
Media in a Periodic Domain, W.R. Hwang, H.L. Liu,
Gyeongsang National University, Jinju, South Korea; J.F.
Wang, Jiangsu University, Zhenjiang, China
Experimental Study of Void Growth During Curing Stage in
VARTM Process, K.-T. Hsiao, V.R. Kedari, University of South
Alabama, Mobile, AL
Mechanical Properties of Aged PETI-330 Laminates Fabricated
by Resin Transfer Molding, S. Bain, Bain Consulting International
Inc., Ontario, Canada; H. Ozawa, Ube America,
Inc., New York, NY; J.M. Criss, Jr., M&P Technologies, Inc.,
Marietta, GA
Minimizing Thickness Variation in Vacuum Infusion (VI) Process,
B. Yenilmez, E. Murat Sozer, Koc University, Istanbul,
Turkey
Analysis and Application of Vacuum Assisted Resin Transfer
Molding Process, Y.-J. Lee, Y.-T. Jhan, National Taiwan
University, Taiwan; C.-H. Chung, United Ship Design and
Development Center, Taiwan