[lagoon] comfortable functions - W. Schillig

Characteristics
Flexible head section
Every article is equipped with
an additional step-by-step
headrest function as standard.
lagoon – visual effects
Cover: leather Z86/99 black
Back support function
All articles could be equipped
with the back support function
(item number = RV1, RV2)
for additional charge. With
that both of the backs can
be adjusted independently
by vapour pressure and with
weight shifting to get into a
comfortable reclining position.
Flexible arm parts
The arm parts are step-by-step
foldable for additional charge.
Item number = SV1, SV2.
Order information
Back parts:
All parts are equipped with the relevant original
covering in the back.
Flexible arm parts:
A maximum load-bearing capacity up to 25 kg is
guaranteed for the flexible arm parts with step-bystep
function. They are no seating accommodation.
Planning sketch:
Owing to the many variation possibilities, please
send a planning sketch with your order. You can use
the magnetic folder for planning and send us a copy
of your plan. At the type plan, we have red-marked
the connecting sides at the articles K 75R/L and ET
for you.
Connecting sides:
The connecting sides are available in original covering
instead of lining against additional charge. See prizes
at the opening credits, page 6).
Seam appearance:
Decorative stitching, flat-fell seams or double seams
can look differently with the quality in material and
leather. Manufacturing-related seams can be dropped
or replaced by simple seams.
Recommendation:
As an occasional furniture we recommend the tables
from model series 10012 and the »jan« armchair
14300. As storage place for the ottomans we
recommend the plexiglas cover L 010 or a matt from
the model series 10006.
Cover: material B12/95 anthracite
Every stated measure is approximately and in
centimetres. Subject to change. The measures are
shown as follows: width/depth/height/seat height
and refer to the leg height of 13 cm.
Seat depth: ca. 62 cm
Height of the arm parts, if function is down:
ca. 50 cm
Height of the arm parts, if function is up: ca. 60 cm
Overall depth with function: ca. 139 cm
Model-demanding quality:
The upholstery of the model is considering casual
processed to create a particular optical appearance.
This is no quality defect, but a quality which
depends on the model and which guarantees
optimal seating comfort.
Order checklist
Remembered everything?
Compilation and cover
Leg design, leg height
Leg colour for wooden/
wood-metal legs
Casters for ottomans
Back support adjustment (surcharge)
Flexible arm parts (surcharge)
Compilation sketch, Cushions
Storage place for the ottomans
(see order information)
Passt gut zu
»lagoon« – der
Sessel »jan«
N o 14300.