to download a copy of the Online Auction catalogue - Sanderson ...
to download a copy of the Online Auction catalogue - Sanderson ...
to download a copy of the Online Auction catalogue - Sanderson ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
On <strong>the</strong> instructions <strong>of</strong> The Wyndeham Press Group Ltd & O<strong>the</strong>rs<br />
Piecemeal (subject <strong>to</strong> Conditions <strong>of</strong> Sale and unless sold previously)<br />
Piecemeal (subject <strong>to</strong> General Conditions and Special Conditions unless previously sold)<br />
WEB OFFSET PRINTING PRESSES,<br />
PACKING & PRE PRESS EQUIPMENT,<br />
FACTORY & OFFICE FURNISHINGS,<br />
PRIVATE & COMMERCIAL VEHICLES<br />
Order <strong>of</strong> sale<br />
Lots<br />
1-6A Web Presses & In-Line Finishing (see note re combination lots)<br />
7-67 Press & In-Line Finishing Equipment Spares & Equipment<br />
67A-71 Bindery Equipment<br />
72-79 Pre-Press Equipment<br />
80-89 Regenerative Thermal Oxidisers & Waste Collection Plant<br />
90-146 Air Compressors, Lifting Equipment & Packaging Equipment<br />
147-278 General Fac<strong>to</strong>ry Equipment<br />
279-279E Private & Commercial Vehicles<br />
280-387 General Fac<strong>to</strong>ry Equipment<br />
388-417D Fitters Shop Equipment<br />
418-477 Office Furniture & Equipment<br />
Pho<strong>to</strong>graphs & timed online bids via www.bidspotter.co.uk<br />
Bidding closes: From 12 noon Wednesday 19 Oc<strong>to</strong>ber 2011<br />
View:<br />
At:<br />
9am-4pm Thursday 13 Oc<strong>to</strong>ber & Tuesday 18 Oc<strong>to</strong>ber 2011 or by appointment<br />
21 & 29 Kingsland Grange, Wools<strong>to</strong>n, nr. Warring<strong>to</strong>n, Cheshire UK, WA1 4RW<br />
Brook House, 64-72 Spring Gardens, Manchester UK, M2 2BQ<br />
Tel: +44 (0) 161 259 7000, Fax: +44 (0) 161 259 7007<br />
auctions@sandersonwea<strong>the</strong>rall.com<br />
sandersonwea<strong>the</strong>rall.com
GENERAL CONDITIONS OF SALE<br />
1. Interpretation<br />
1.1. In <strong>the</strong>se General Conditions <strong>the</strong> following words and expressions<br />
shall have <strong>the</strong> meanings set opposite:<br />
“<strong>Auction</strong>”<br />
any auction (whe<strong>the</strong>r a Live <strong>Auction</strong> or an<br />
<strong>Online</strong> <strong>Auction</strong> and whe<strong>the</strong>r conducted<br />
independently or simultaneously) conducted<br />
pursuant <strong>to</strong> <strong>the</strong>se General Conditions and <strong>the</strong><br />
Special Conditions;<br />
“<strong>Auction</strong>eer”<br />
<strong>the</strong> person conducting <strong>the</strong> <strong>Auction</strong> or <strong>to</strong> whom<br />
<strong>the</strong> conduct <strong>of</strong> <strong>the</strong> <strong>Auction</strong> is delegated under<br />
General Condition 4.9 below;<br />
“Bidder”<br />
any person who <strong>of</strong>fers <strong>to</strong> purchase any Lot<br />
whe<strong>the</strong>r by bidding at <strong>Auction</strong> or <strong>of</strong>fering <strong>to</strong><br />
purchase by private treaty or tender;<br />
“Bid”<br />
an <strong>of</strong>fer <strong>to</strong> purchase any Lot whe<strong>the</strong>r by<br />
bidding at <strong>Auction</strong> or <strong>of</strong>fering <strong>to</strong> purchase by<br />
private treaty or tender, and “Bids” and<br />
“Bidding” shall be construed accordingly;<br />
“Buyer”<br />
any person who agrees <strong>to</strong> purchase any Lot<br />
whe<strong>the</strong>r at <strong>Auction</strong> or by private treaty or<br />
tender and as determined under General<br />
condition 4.12 below;<br />
"Buyer's Premium" a commission payable by <strong>the</strong> Buyer on <strong>the</strong><br />
completion <strong>of</strong> a Sale <strong>the</strong> amount <strong>of</strong> which is<br />
set out in <strong>the</strong> Special Conditions; The<br />
<strong>Auction</strong>eer, when acting as Agent for <strong>the</strong><br />
Seller, may also receive commission from <strong>the</strong><br />
Seller.<br />
“Catalogue”<br />
<strong>the</strong> <strong>catalogue</strong> incorporating <strong>the</strong>se General<br />
Conditions and <strong>the</strong> Special Conditions;<br />
"Clearance Date and Time" <strong>the</strong> date and time on which all Lots must<br />
be removed by <strong>the</strong> Buyer from <strong>the</strong> Location as<br />
specified in <strong>the</strong> Special Conditions;<br />
“The Company” <strong>Sanderson</strong> Wea<strong>the</strong>rall LLP (company number<br />
OC 344 770) whose registered <strong>of</strong>fice is at 25<br />
Welling<strong>to</strong>n Street Leeds LS1 4WG;<br />
"Deposit"<br />
<strong>the</strong> sum payable by <strong>the</strong> Buyer <strong>to</strong> <strong>the</strong> Company<br />
as set out in <strong>the</strong> Special Conditions;<br />
"Live <strong>Auction</strong>" any auction conducted at <strong>the</strong> Location or at<br />
such o<strong>the</strong>r location(s) as shall be notified by<br />
<strong>the</strong> Company in <strong>the</strong> Special Conditions or in<br />
<strong>the</strong> Catalogue;<br />
“Location”<br />
<strong>the</strong> premises at which <strong>the</strong> Lots are located,<br />
details <strong>of</strong> which are set out in <strong>the</strong> Special<br />
Conditions;<br />
“Lot”<br />
any Lot described in <strong>the</strong> Catalogue, on <strong>the</strong><br />
Website or on <strong>the</strong> Company’s invoice;<br />
"<strong>Online</strong> <strong>Auction</strong>" any auction conducted over <strong>the</strong> internet via <strong>the</strong><br />
Website pursuant <strong>to</strong> <strong>the</strong>se General Conditions<br />
and <strong>the</strong> Special Conditions;<br />
"Sale"<br />
<strong>the</strong> sale <strong>of</strong> any Lot by <strong>Auction</strong>, private treaty or<br />
tender and as determined under General<br />
Condition 4.11 below;<br />
“Seller”<br />
<strong>the</strong> person upon whose instructions <strong>the</strong><br />
Company is conducting <strong>the</strong> Sale, details <strong>of</strong><br />
whom are set out in <strong>the</strong> Special Conditions;<br />
“Special Conditions” any additions <strong>to</strong> <strong>the</strong>se General Conditions set<br />
out or referred <strong>to</strong> in <strong>the</strong> Catalogue, announced<br />
at <strong>Auction</strong> or o<strong>the</strong>rwise specified by <strong>the</strong><br />
Company;<br />
"Website"<br />
"VAT"<br />
<strong>the</strong> website at: www.bidspotter.co.uk;<br />
value added tax chargeable under English Law<br />
for <strong>the</strong> time being and any similar additional<br />
tax.<br />
2. Application <strong>of</strong> <strong>the</strong>se General Conditions<br />
2.1. These General Conditions apply <strong>to</strong> every Sale <strong>of</strong> plant and<br />
machinery, chattels and trade s<strong>to</strong>cks conducted by <strong>the</strong> Company.<br />
2.2. These General Conditions, <strong>the</strong> Special Conditions and any terms<br />
set out in <strong>the</strong> Catalogue shall <strong>to</strong>ge<strong>the</strong>r comprise <strong>the</strong> "Conditions <strong>of</strong><br />
Sale".<br />
2.3. To <strong>the</strong> extent that <strong>the</strong>se General Conditions are inconsistent with<br />
any Special Conditions, <strong>the</strong> General Conditions shall prevail.<br />
2.4. Bidding for any Lot shall be deemed <strong>to</strong> be an acceptance by <strong>the</strong><br />
Bidder <strong>of</strong> <strong>the</strong>se General Conditions and <strong>the</strong> Special Conditions.<br />
2.5. These General Conditions shall be governed construed and<br />
enforced in accordance with <strong>the</strong> laws <strong>of</strong> England and Wales unless<br />
<strong>the</strong> Location is in:-<br />
2.5.1 Scotland in which case <strong>the</strong> laws <strong>of</strong> Scotland shall apply; or<br />
2.5.2 Nor<strong>the</strong>rn Ireland in which case <strong>the</strong> laws <strong>of</strong> Nor<strong>the</strong>rn Ireland<br />
shall apply.<br />
2.6. A reference <strong>to</strong> writing or written shall include e-mail.<br />
2.7. Any word or phrase having a meaning defined in <strong>the</strong>se General<br />
Conditions shall have <strong>the</strong> same meaning when used in <strong>the</strong> Special<br />
Conditions.<br />
3. Identity <strong>of</strong> <strong>the</strong> Parties<br />
3.1. The Company <strong>of</strong>fers each Lot as agent <strong>of</strong> <strong>the</strong> Seller and not as<br />
principal unless o<strong>the</strong>rwise indicated in <strong>the</strong> Catalogue.<br />
3.2. The identity <strong>of</strong> <strong>the</strong> Seller is set out in <strong>the</strong> Special Conditions.<br />
3.3. Unless <strong>the</strong> Company has previously acknowledged in writing that<br />
<strong>the</strong> Bidder Bids as agent on behalf <strong>of</strong> a named principal, every<br />
Bidder shall be taken <strong>to</strong> Bid on his own behalf as principal.<br />
3.4. Any Bidder acting as agent on behalf <strong>of</strong> a named principal shall<br />
remain liable <strong>to</strong> <strong>the</strong> Seller and <strong>the</strong> Company for all obligations and<br />
liabilities <strong>of</strong> his principal jointly and severally with <strong>the</strong> principal. The<br />
Bidder warrants that he has <strong>the</strong> authority <strong>of</strong> his principal <strong>to</strong> make<br />
each Bid made.<br />
3.5. Every Bidder is required <strong>to</strong> give his name and address and provide<br />
satisfac<strong>to</strong>ry pro<strong>of</strong> <strong>of</strong> identity and such o<strong>the</strong>r information and<br />
documentation as is required <strong>to</strong> <strong>the</strong> Company before making any<br />
Bid and in <strong>the</strong> case <strong>of</strong>:<br />
3.5.1. a Live <strong>Auction</strong> by <strong>the</strong> completion <strong>of</strong> a registration form;<br />
3.5.2 an <strong>Online</strong> <strong>Auction</strong> by online registration at <strong>the</strong> Website; and<br />
3.5.3 a private treaty or tender by prior registration or notification <strong>of</strong><br />
details, as and when requested by <strong>the</strong> Company.<br />
3.6 The Company reserves <strong>the</strong> right at any time <strong>to</strong> reject <strong>the</strong><br />
registration <strong>of</strong> any persons and refuse access <strong>to</strong> <strong>the</strong> <strong>Auction</strong> at its<br />
sole discretion.<br />
3.7 On registration for an <strong>Online</strong> <strong>Auction</strong> Bidders will be added <strong>to</strong> <strong>the</strong><br />
Company's mailing list for <strong>the</strong> purposes <strong>of</strong> notification <strong>of</strong> future sales<br />
by email. If a Bidder wishes <strong>to</strong> s<strong>to</strong>p receiving such notifications <strong>the</strong>y<br />
can unsubscribe at any time by clicking on <strong>the</strong> link provided at <strong>the</strong><br />
bot<strong>to</strong>m <strong>of</strong> each email.<br />
3.8 On registration in accordance with General condition 3.5 <strong>the</strong> Bidder<br />
acknowledges that only adults aged 18 years and over are entitled<br />
<strong>to</strong> enter in<strong>to</strong> a legally binding contract and as a result <strong>the</strong>y are <strong>the</strong><br />
only people entitled <strong>to</strong> register for <strong>the</strong> <strong>Auction</strong>. By registering <strong>the</strong><br />
Bidder warrants that he is aged 18 years or older and is capable <strong>of</strong><br />
forming a legally binding contract.<br />
4 Conduct <strong>of</strong> <strong>Auction</strong>s<br />
4.1 Any Lot may be subject <strong>to</strong> a minimum bid or reserve price. The<br />
Seller is entitled <strong>to</strong> change <strong>the</strong>se at any time before <strong>the</strong> conclusion<br />
<strong>of</strong> <strong>the</strong> Sale.<br />
4.2 The Seller, <strong>Auction</strong>eer or any representative, agent or person acting<br />
on behalf <strong>of</strong> <strong>the</strong> Seller may Bid for any Lot. Persons entitled <strong>to</strong> Bid<br />
pursuant <strong>to</strong> this condition 4.2 shall be entitled <strong>to</strong> place Bids on any<br />
Lot up <strong>to</strong> <strong>the</strong> reserve price including by placing Bids in response <strong>to</strong><br />
o<strong>the</strong>r Bidders.<br />
4.3 Lot descriptions will be amended as appropriate as and when<br />
information becomes available <strong>to</strong> <strong>the</strong> Company. Prospective<br />
Bidders must read Lot descriptions before making a Bid so that <strong>the</strong>y<br />
are fully aware <strong>of</strong> any amendments <strong>to</strong> <strong>the</strong> description appearing in<br />
<strong>the</strong> Special Conditions and/or on <strong>the</strong> Website or in <strong>the</strong> Catalogue in<br />
relation <strong>to</strong> a particular Lot.<br />
4.4 The <strong>Auction</strong>eer may at any time before <strong>the</strong> conclusion <strong>of</strong> <strong>the</strong> Sale<br />
withdraw or divide any Lot or combine any Lots.<br />
4.5 The Company may sell any Lot by private treaty or tender before or<br />
after <strong>the</strong> <strong>Auction</strong>. The <strong>Auction</strong>eer may reject any Bid at his sole<br />
discretion and without being required <strong>to</strong> give a reason.<br />
4.6 No Bid shall be retracted without <strong>the</strong> consent <strong>of</strong> <strong>the</strong> <strong>Auction</strong>eer.<br />
4.7 The <strong>Auction</strong>eer may where <strong>the</strong>re is a dispute between Bidders,<br />
summarily determine <strong>the</strong> dispute or immediately again <strong>of</strong>fer <strong>the</strong> Lot<br />
for sale, in each case without being required <strong>to</strong> give a reason.<br />
4.8 The <strong>Auction</strong>eer shall in every o<strong>the</strong>r respect decide how <strong>the</strong> <strong>Auction</strong><br />
is <strong>to</strong> be conducted and without being required <strong>to</strong> give a reason.<br />
4.9 The <strong>Auction</strong>eer may in his sole discretion delegate <strong>to</strong> a person<br />
whom he believes <strong>to</strong> be competent <strong>the</strong> conduct <strong>of</strong> <strong>the</strong> <strong>Auction</strong> in<br />
accordance with <strong>the</strong>se General Conditions.<br />
4.10 The <strong>Auction</strong>eer may from time <strong>to</strong> time act jointly with an associated<br />
<strong>Auction</strong>eer who will be named in <strong>the</strong> Catalogue and/or in <strong>the</strong> Special<br />
Conditions.<br />
4.11 A Sale is concluded (constituting acceptance <strong>of</strong> <strong>the</strong> Bidder's <strong>of</strong>fer,<br />
subject <strong>to</strong> General Condition 4.12 below) when:<br />
4.11.1 in <strong>the</strong> case <strong>of</strong> a Live <strong>Auction</strong>, on <strong>the</strong> fall <strong>of</strong> <strong>the</strong> <strong>Auction</strong>eer's<br />
hammer; and/or,<br />
4.11.2 in <strong>the</strong> case <strong>of</strong> an <strong>Online</strong> <strong>Auction</strong>, at <strong>the</strong> close <strong>of</strong> <strong>the</strong> timed<br />
<strong>Online</strong> <strong>Auction</strong> Sale as specified on <strong>the</strong> Website and as<br />
defined by General Condition 4.17.3 below or;<br />
4.11.3 in <strong>the</strong> case <strong>of</strong> a private treaty or tender, when <strong>the</strong> Bidders<br />
Bid is accepted by <strong>the</strong> Company, such acceptance <strong>to</strong> be<br />
communicated <strong>to</strong> <strong>the</strong> Bidder in writing by way <strong>of</strong> receipt <strong>of</strong><br />
<strong>the</strong> Company’s invoice.<br />
4.12 The Buyer shall be <strong>the</strong> person who made <strong>the</strong> highest Bid before <strong>the</strong><br />
conclusion <strong>of</strong> <strong>the</strong> Sale pursuant <strong>to</strong> General Condition 4.11 above<br />
subject <strong>to</strong> approval and acceptance by <strong>the</strong> Company, <strong>the</strong><br />
<strong>Auction</strong>eers and <strong>the</strong> Seller or such o<strong>the</strong>r Bidder as <strong>the</strong> <strong>Auction</strong>eer<br />
and/ or <strong>the</strong> Company may declare <strong>to</strong> be <strong>the</strong> Buyer without being<br />
required <strong>to</strong> give a reason. The <strong>Auction</strong>eer and/ or <strong>the</strong> Company<br />
and/ or <strong>the</strong> Seller is not bound <strong>to</strong> accept <strong>the</strong> highest Bid or any<br />
o<strong>the</strong>r Bid placed in <strong>the</strong> course <strong>of</strong> <strong>the</strong> <strong>Auction</strong>.<br />
4.13 In <strong>the</strong> case <strong>of</strong> an <strong>Online</strong> <strong>Auction</strong> <strong>the</strong> Buyer, as determined under<br />
General Condition 4.12 above, shall within a reasonable time after<br />
<strong>the</strong> conclusion <strong>of</strong> <strong>the</strong> Sale receive by email an invoice in respect <strong>of</strong><br />
<strong>the</strong> monies due for <strong>the</strong> Lot(s) purchased.<br />
4.14 In <strong>the</strong> event that <strong>the</strong> reserve price is not met, <strong>the</strong> Company may<br />
consider <strong>the</strong> Bids received below <strong>the</strong> reserve price with <strong>the</strong> Seller<br />
who at its sole discretion may accept, reject or place a counter<strong>of</strong>fer.<br />
4.15 On conclusion <strong>of</strong> <strong>the</strong> Sale and acceptance <strong>of</strong> <strong>the</strong> Bidders Bid<br />
pursuant <strong>to</strong> General Conditions 4.11 and 4.12 above, <strong>the</strong> Buyer
acknowledges and agrees that he has entered in<strong>to</strong> a contract with<br />
<strong>the</strong> Seller <strong>to</strong> buy <strong>the</strong> Lot and <strong>the</strong> Buyer must complete <strong>the</strong><br />
transaction <strong>to</strong> purchase <strong>the</strong> Lot.<br />
4.16 The Buyer may not remove any Lot he has bought until after <strong>the</strong><br />
end <strong>of</strong> <strong>the</strong> <strong>Auction</strong>.<br />
4.17 In relation <strong>to</strong> an <strong>Online</strong> <strong>Auction</strong>:<br />
4.17.1 <strong>the</strong> Company cannot guarantee that <strong>the</strong> internet services<br />
will operate continuously or without interruptions and this<br />
could affect <strong>the</strong> conduct <strong>of</strong> <strong>the</strong> <strong>Online</strong> <strong>Auction</strong> and <strong>the</strong><br />
Bidders ability <strong>to</strong> Bid online. The Company shall not be<br />
liable in any respect in <strong>the</strong> event <strong>of</strong> any dispute due <strong>to</strong><br />
errors, omissions or disruptions <strong>to</strong> internet services or<br />
power failures or any o<strong>the</strong>r unforeseen circumstances<br />
which may occur during <strong>the</strong> <strong>Online</strong> <strong>Auction</strong>;<br />
4.17.2 <strong>the</strong> <strong>Auction</strong>eer may at any time, without notice, postpone or<br />
cancel an <strong>Online</strong> <strong>Auction</strong> or extend an <strong>Online</strong> <strong>Auction</strong><br />
beyond <strong>the</strong> published closing time (including extension <strong>of</strong><br />
<strong>the</strong> timed <strong>Online</strong> <strong>Auction</strong> in accordance with General<br />
Condition 4.17.3 below);<br />
4.17.3 <strong>the</strong> timed <strong>Online</strong> <strong>Auction</strong> Sale is au<strong>to</strong> bid extension enabled<br />
meaning that where a Bid is placed within ten minutes <strong>of</strong><br />
<strong>the</strong> original scheduled close <strong>of</strong> <strong>the</strong> timed <strong>Online</strong> <strong>Auction</strong> <strong>the</strong><br />
scheduled close <strong>of</strong> <strong>the</strong> timed <strong>Online</strong> <strong>Auction</strong> will<br />
au<strong>to</strong>matically be extended by an additional ten minutes.<br />
This continues with a new scheduled close time each time a<br />
Bid is placed until no-one places a Bid before <strong>the</strong> last<br />
scheduled close <strong>of</strong> <strong>the</strong> timed <strong>Online</strong> <strong>Auction</strong>. Every time a<br />
Bid is placed within ten minutes or less left in <strong>the</strong> <strong>Online</strong><br />
<strong>Auction</strong> an additional ten minutes Bidding time is added<br />
until <strong>the</strong>re are no more Bids. Such time shall <strong>the</strong>n be<br />
deemed <strong>to</strong> be <strong>the</strong> close <strong>of</strong> <strong>the</strong> timed <strong>Online</strong> <strong>Auction</strong>.<br />
4.18 In <strong>the</strong> event that <strong>the</strong> <strong>Auction</strong>eer unknowingly sells a Lot that was not<br />
eligible for Sale (i.e. <strong>the</strong>re is a third party interest that comes <strong>to</strong><br />
light) <strong>the</strong>n <strong>the</strong> <strong>Auction</strong>eer shall be entitled <strong>to</strong> immediately rescind<br />
that Sale without any fur<strong>the</strong>r liability <strong>to</strong> <strong>the</strong> <strong>Auction</strong>eer and/or<br />
Company or <strong>the</strong> Seller.<br />
4.19 Copies <strong>of</strong> <strong>the</strong> <strong>Auction</strong>s (Bidding Agreements) Act 1927 and 1969<br />
are held at <strong>the</strong> Company’s and/or <strong>the</strong> <strong>Auction</strong>eer’s principal place<br />
<strong>of</strong> business.<br />
5 Sale and Payment<br />
5.1 The Buyer shall pay <strong>the</strong> following sums <strong>to</strong> <strong>the</strong> Company in full and<br />
without set <strong>of</strong>f:-<br />
5.1.1 immediately upon <strong>the</strong> Sale <strong>of</strong> any Lot <strong>the</strong> Deposit, if<br />
requested by <strong>the</strong> Company; and<br />
5.1.2 <strong>the</strong> balance <strong>of</strong> <strong>the</strong> price <strong>of</strong> <strong>the</strong> Lot purchased, <strong>to</strong>ge<strong>the</strong>r with<br />
<strong>the</strong> Buyer’s Premium by no later than 48 hours after<br />
conclusion <strong>of</strong> <strong>the</strong> Sale or, in <strong>the</strong> case <strong>of</strong> an <strong>Online</strong> <strong>Auction</strong>,<br />
after receipt <strong>of</strong> an invoice in respect <strong>of</strong> <strong>the</strong> purchased Lot(s)<br />
pursuant <strong>to</strong> General Condition 4.13 above, or such o<strong>the</strong>r time<br />
and date as may be specified in <strong>the</strong> Special Conditions; and<br />
5.1.3 any o<strong>the</strong>r payment or amount due <strong>to</strong> <strong>the</strong> Seller and/or <strong>the</strong><br />
Company pursuant <strong>to</strong> <strong>the</strong>se General Conditions or <strong>the</strong><br />
Special Conditions on demand.<br />
5.2 In every case time for payment shall be <strong>of</strong> <strong>the</strong> essence.<br />
5.3 In view <strong>of</strong> Money Laundering Regulations <strong>the</strong> Company reserves<br />
<strong>the</strong> right <strong>to</strong> refuse payment in cash. Payments in cash <strong>of</strong> more than<br />
£7,500 will not, in any circumstances, be accepted.<br />
5.4 If <strong>the</strong> Buyer fails <strong>to</strong> make any payment on <strong>the</strong> due date for payment<br />
<strong>the</strong>n, without limiting any o<strong>the</strong>r right or remedy available <strong>to</strong> <strong>the</strong><br />
Seller, <strong>the</strong> Buyer shall pay <strong>to</strong> <strong>the</strong> Company interest (both before and<br />
after any judgment) on <strong>the</strong> amount unpaid at <strong>the</strong> rate <strong>of</strong> 1.5% above<br />
<strong>the</strong> bank base rate <strong>of</strong> Barclays Bank Plc per month or any part<br />
<strong>the</strong>re<strong>of</strong> until payment in full is made.<br />
5.5 Until <strong>the</strong> Buyer has fully complied with its obligations in this General<br />
Condition 5:-<br />
5.5.1 title <strong>to</strong> any Lot bought shall not pass <strong>to</strong> <strong>the</strong> Buyer;<br />
5.5.2 <strong>the</strong> Seller shall have a lien over any Lot bought by <strong>the</strong> Buyer<br />
in <strong>the</strong> <strong>Auction</strong>;<br />
5.5.3 if <strong>the</strong> Buyer effects or purports <strong>to</strong> effect a resale or any o<strong>the</strong>r<br />
disposition <strong>of</strong> all or part <strong>of</strong> <strong>the</strong> Lot, <strong>the</strong> Buyer shall hold <strong>the</strong><br />
proceeds <strong>of</strong> resale or o<strong>the</strong>r disposition on trust for <strong>the</strong> Seller.<br />
5.6 All sums payable under <strong>the</strong>se General Conditions and <strong>the</strong> Special<br />
Conditions are exclusive <strong>of</strong> any applicable VAT for which <strong>the</strong> Buyer<br />
shall be additionally liable <strong>to</strong> pay <strong>to</strong> <strong>the</strong> Company. On written<br />
request by <strong>the</strong> Buyer <strong>the</strong> Company will provide a VAT invoice.<br />
5.7 The Company will only accept payment under this General<br />
Condition 5 from <strong>the</strong> Buyer or its authorised agents.<br />
6 Removal <strong>of</strong> Lots<br />
6.1 Risk <strong>of</strong> damage <strong>to</strong> or loss <strong>of</strong> <strong>the</strong> Lot shall pass <strong>to</strong> <strong>the</strong> Buyer<br />
immediately upon <strong>the</strong> conclusion <strong>of</strong> <strong>the</strong> Sale.<br />
6.2 The removal <strong>of</strong> Lots from <strong>the</strong> Location shall be undertaken by <strong>the</strong><br />
Buyer entirely at its own risk and without any liability whatsoever <strong>to</strong><br />
<strong>the</strong> Company.<br />
6.3 Buyers are responsible for any and all costs and expenses incurred<br />
in relation <strong>to</strong> <strong>the</strong> removal <strong>of</strong> Lots and any o<strong>the</strong>r applicable charges,<br />
taxes and insurance costs.<br />
6.4 The Buyer may not remove any Lot until <strong>the</strong> Buyer has:-<br />
6.4.1 paid by cleared funds all amounts payable pursuant <strong>to</strong><br />
General Condition 5 above in full; and<br />
6.4.2 if requested by <strong>the</strong> Company produced satisfac<strong>to</strong>ry evidence<br />
<strong>to</strong> <strong>the</strong> Company that <strong>the</strong> Buyer has adequate public liability<br />
insurance in respect <strong>of</strong> <strong>the</strong> indemnity set out in General<br />
Condition 6.11 below and/or deposited with <strong>the</strong> Company, by<br />
way <strong>of</strong> security for <strong>the</strong> costs <strong>of</strong> making good any damage<br />
likely <strong>to</strong> occur, such sum as <strong>the</strong> Company may stipulate.<br />
6.5 The Company will only permit <strong>the</strong> removal <strong>of</strong> Lots purchased by <strong>the</strong><br />
Buyer or its authorised agents.<br />
6.6 The Buyer must remove each Lot purchased by <strong>the</strong> Clearance Date<br />
and Time for which time shall be <strong>of</strong> <strong>the</strong> essence. Lots may only be<br />
removed during normal working hours or such hours as are<br />
specified in <strong>the</strong> Special Conditions. No clearance on Bank or Public<br />
Holidays.<br />
6.7 Buyers should co-operate regarding order <strong>of</strong> removal <strong>of</strong> Lots in<br />
order <strong>to</strong> comply with <strong>the</strong> Clearance Date and Time. If it transpires<br />
that a Buyer makes no effort <strong>to</strong> commence dismantling and <strong>the</strong><br />
particular Lot is preventing o<strong>the</strong>r buyers from removing purchased<br />
Lots, <strong>the</strong>n <strong>the</strong> <strong>Auction</strong>eer reserves <strong>the</strong> right <strong>to</strong> insist that removal<br />
take place immediately notwithstanding <strong>the</strong> specified Clearance<br />
Date and Time. In <strong>the</strong> event <strong>the</strong> Buyer does not comply with its<br />
obligations under this General Condition 6.7, <strong>the</strong>n <strong>the</strong> <strong>Auction</strong>eer<br />
reserves <strong>the</strong> right <strong>to</strong> arrange for <strong>the</strong> removal and/or s<strong>to</strong>rage <strong>of</strong> <strong>the</strong><br />
Lot and charge any attendant costs <strong>to</strong> <strong>the</strong> Buyer.<br />
6.8 If any Lot is unsold and has <strong>to</strong> be dismantled & lowered <strong>to</strong> allow <strong>the</strong><br />
removal <strong>of</strong> any o<strong>the</strong>r lot, <strong>the</strong>n such dismantling & lowering shall be<br />
<strong>the</strong> responsibility <strong>of</strong> <strong>the</strong> Buyer <strong>of</strong> <strong>the</strong> relevant Lot(s).<br />
6.9 Title <strong>to</strong> computer s<strong>of</strong>tware sold pursuant <strong>to</strong> <strong>the</strong> Sale <strong>of</strong> a Lot is not<br />
transferred under any Sale <strong>to</strong> <strong>the</strong> Buyer and use is subject <strong>to</strong> any<br />
licence or <strong>copy</strong>right restrictions and user conditions. The Sellers,<br />
Company and/or <strong>Auction</strong>eers reserve <strong>the</strong> right <strong>to</strong> erase any private<br />
or sensitive information prior <strong>to</strong> <strong>the</strong> Sale or at any later date.<br />
6.10 The Buyer and/or his removal contrac<strong>to</strong>r must liaise with <strong>the</strong><br />
Company's site representative prior <strong>to</strong> commencing<br />
dismantling/removal <strong>of</strong> a Lot from <strong>the</strong> Location and must at all times<br />
comply with its obligations under clause 6.11 below.<br />
6.11 When removing any Lot from <strong>the</strong> Location <strong>the</strong> Buyer shall, or shall<br />
procure that its removal contrac<strong>to</strong>rs shall:<br />
6.11.1 carry out a full assessment <strong>of</strong> Lot, <strong>the</strong> Location and <strong>the</strong><br />
land or buildings <strong>to</strong> which <strong>the</strong> Lot is fixed <strong>to</strong> assess <strong>the</strong><br />
risks associated with detaching/removing <strong>the</strong> Lot and shall<br />
fully satisfy <strong>the</strong>mselves that <strong>the</strong>y can detach/remove <strong>the</strong><br />
Lot in compliance with <strong>the</strong> Buyers obligations under this<br />
General Condition 6.11 prior <strong>to</strong> handling and/or<br />
commencing removal <strong>of</strong> a Lot;<br />
6.11.2 obtain all relevant planning permissions (where required) in<br />
relation <strong>to</strong> <strong>the</strong> removal <strong>of</strong> building structures and plant<br />
housings;<br />
6.11.3 buyers <strong>of</strong> Lots will be required <strong>to</strong> make good holes or voids<br />
exposed by <strong>the</strong> removal <strong>of</strong> Lots. Cladding taken <strong>of</strong>f<br />
buildings for removal <strong>of</strong> plant & equipment will have <strong>to</strong> be<br />
replaced, unless o<strong>the</strong>rwise specified by <strong>the</strong> Company;<br />
6.11.4 when detaching any Lot fixed <strong>to</strong> land or buildings, do so<br />
safely and lawfully and must not use flame cutters,<br />
explosives or any o<strong>the</strong>r dangerous equipment or process<br />
without first obtaining written consent <strong>of</strong> <strong>the</strong> Company;<br />
6.11.5 remove <strong>the</strong> Lot in compliance with all relevant legislation,<br />
regulations, codes <strong>of</strong> practice, guidance, orders, rules and<br />
o<strong>the</strong>r requirements <strong>of</strong> any relevant government or<br />
governmental agency or authority whe<strong>the</strong>r Parliamentary,<br />
statu<strong>to</strong>ry, parochial or local including (without limitation) in<br />
compliance with <strong>the</strong> Health and Safety at Work etc Act<br />
1974, <strong>the</strong> Environmental Protection Act 1990, The<br />
Construction (Design and Management) Regulations 2007,<br />
Control <strong>of</strong> Substances Hazardous <strong>to</strong> Health Regulations<br />
2002 (COSHH), and <strong>the</strong> Road Vehicle (Construction and<br />
Use) Regulations 1986 and any subsequent amendments<br />
<strong>the</strong>re<strong>of</strong> and all o<strong>the</strong>r health and safety and environmental<br />
legislation in existence at <strong>the</strong> time <strong>of</strong> <strong>the</strong> Sale. To <strong>the</strong><br />
extent that such regulations are advisory ra<strong>the</strong>r than<br />
manda<strong>to</strong>ry, <strong>the</strong> standard <strong>of</strong> compliance <strong>to</strong> be achieved by<br />
<strong>the</strong> Buyer shall be <strong>to</strong> <strong>the</strong> best industry practice;<br />
In all cases arising under this General Condition 6.11 <strong>the</strong> costs <strong>of</strong><br />
compliance shall be borne by <strong>the</strong> Buyer and <strong>the</strong> Buyer hereby<br />
indemnifies <strong>the</strong> Company and <strong>the</strong> Seller against all losses, costs,<br />
expenses, damages, liabilities, demands, claims, actions and<br />
proceedings which <strong>the</strong> Company and/or <strong>the</strong> Seller may incur arising<br />
directly or indirectly out <strong>of</strong> any breach by <strong>the</strong> Buyer <strong>to</strong> <strong>the</strong> provisions<br />
<strong>of</strong> this General Condition 6.11 and <strong>the</strong> Buyer shall make good any<br />
damage caused <strong>to</strong> (without limitation) o<strong>the</strong>r lots, <strong>the</strong> Location or <strong>to</strong><br />
any property belonging <strong>to</strong> third parties, in removing any Lot under<br />
this General Condition 6.11.<br />
6.12 The Company shall be entitled <strong>to</strong> halt <strong>the</strong> clearance <strong>of</strong> any Lot if in<br />
its absolute discretion <strong>the</strong> removal <strong>of</strong> a Lot is being carried out in an<br />
unsatisfac<strong>to</strong>ry manner. Where <strong>the</strong> clearance is halted by <strong>the</strong><br />
Company, <strong>the</strong> Buyer must liaise with <strong>the</strong> Company's site<br />
representative as <strong>to</strong> how <strong>the</strong> Lot should be removed from <strong>the</strong><br />
Location provided that <strong>the</strong> Buyer shall at all times ensure that it<br />
complies with its obligations under General Condition 6.11 above<br />
and <strong>the</strong> Company shall have no liability in this regard.<br />
6.13 The Buyer shall provide evidence as and when requested by <strong>the</strong><br />
Company <strong>of</strong> <strong>the</strong> Buyer's insurance policies in respect <strong>of</strong> <strong>the</strong><br />
following insurances and at a minimum level <strong>of</strong>:<br />
6.13.1. Public Liability Cover - limit Two Million Pounds (£<br />
2,000,000); and
6.13.2. Employers Liability Cover - limit Ten Million Pounds<br />
(£10,000,000);<br />
<strong>the</strong> Company reserves <strong>the</strong> right <strong>to</strong> vary <strong>the</strong> level <strong>of</strong><br />
insurance cover stated above at any time, as and when<br />
required.<br />
6.14 The Buyer shall provide <strong>to</strong> <strong>the</strong> Company a Risk Assessment &<br />
Method Statement complying with The Construction (Design &<br />
Management) Regulations 2007, COSHH or with any subsequent<br />
amendments <strong>the</strong>re<strong>of</strong> or such o<strong>the</strong>r legislation as shall from time <strong>to</strong><br />
time be in force.<br />
6.15 Electric, gas, water, steam and waste disconnections are <strong>the</strong><br />
responsibility <strong>of</strong> <strong>the</strong> Buyer and MUST be carried out by an approved<br />
contrac<strong>to</strong>r following consultation with <strong>the</strong> site representative.<br />
6.16 It is expressly brought <strong>to</strong> <strong>the</strong> Buyer’s attention that certain Lots<br />
could contain blue or white asbes<strong>to</strong>s, dangerous chemicals etc.<br />
which if not handled correctly during <strong>the</strong>ir removal could result in<br />
breach <strong>of</strong> Health & Safety at Work legislation and/or Control <strong>of</strong><br />
Substances Hazardous <strong>to</strong> Health Regulations or o<strong>the</strong>r statu<strong>to</strong>ry<br />
requirements.<br />
6.17 Any fluids, gases and/ or waste remaining in plant and machinery<br />
are <strong>the</strong> responsibility <strong>of</strong> <strong>the</strong> Buyer and MUST be removed from <strong>the</strong><br />
Location strictly in accordance with any applicable statu<strong>to</strong>ry<br />
requirements.<br />
6.18 The Buyer must use safe and lawful means <strong>of</strong> removing <strong>the</strong> Lot,<br />
must comply with all current statu<strong>to</strong>ry requirements and regulations<br />
including those relating <strong>to</strong> <strong>the</strong> disposal and removal if waste, and if<br />
required, satisfy <strong>the</strong> Company in relation <strong>to</strong> <strong>the</strong>ir removal<br />
procedures; in particular, <strong>the</strong> removal <strong>of</strong> waste materials must be<br />
undertaken by an approved and licensed contrac<strong>to</strong>r <strong>to</strong> an approved<br />
waste management site.<br />
6.19 It is <strong>the</strong> purchaser’s or <strong>the</strong>ir removal contrac<strong>to</strong>rs responsibility (i.e.<br />
Police, Ministry <strong>of</strong> Transport, Local Authority) <strong>to</strong> transport <strong>of</strong>f site<br />
long/ wide loads, within sufficient time prior <strong>to</strong> <strong>the</strong> commencement<br />
<strong>of</strong> clearance period as stated in <strong>the</strong> Special Notes & Conditions.<br />
6.20 The Buyer shall indemnify <strong>the</strong> Company and <strong>the</strong> Seller against any<br />
loss, damages, expenses, claims or liabilities arising directly or<br />
indirectly from <strong>the</strong> possession or use <strong>of</strong> <strong>the</strong> Lot after title <strong>to</strong> <strong>the</strong> Lot<br />
has passed <strong>to</strong> <strong>the</strong> Buyer but before it is removed from <strong>the</strong> Location.<br />
6.21 All Lots are sold on <strong>the</strong> understanding that <strong>the</strong> Seller does not<br />
represent <strong>the</strong>m as being in a condition which makes <strong>the</strong>m suitable<br />
for domestic use. If any Lots are intended for domestic use <strong>the</strong><br />
Buyer must ensure that <strong>the</strong>y comply with <strong>the</strong> requirements <strong>of</strong> <strong>the</strong><br />
Furniture & Furnishings (Fire) (Safety) Regulations 1988 and any<br />
subsequent amendments <strong>the</strong>re<strong>of</strong> or such o<strong>the</strong>r relevant statu<strong>to</strong>ry<br />
requirements or regulations as shall from time <strong>to</strong> time be in force.<br />
6.22 The Buyer undertakes <strong>to</strong> comply with <strong>the</strong> provisions <strong>of</strong> <strong>the</strong> Data<br />
Protection Act 1998 in processing data held by <strong>the</strong>m in connection<br />
with any Lot.<br />
7 Default by <strong>the</strong> Buyer<br />
7.1 If at any time <strong>the</strong> Buyer has failed <strong>to</strong> pay <strong>the</strong> sums specified in<br />
General Condition 5 above in full by <strong>the</strong> due date for payment, or <strong>to</strong><br />
remove any Lot purchased by <strong>the</strong> Clearance Date and Time<br />
specified in <strong>the</strong> Special Conditions <strong>the</strong> Seller may rescind <strong>the</strong> Sale<br />
<strong>of</strong> that Lot, in which case any Deposit shall be forfeit, and that Lot<br />
may be resold.<br />
7.2 If <strong>the</strong> Seller has rescinded <strong>the</strong> Sale but <strong>the</strong> Buyer has removed <strong>the</strong><br />
Lot purchased, <strong>the</strong> Seller shall be entitled without previous notice <strong>to</strong><br />
enter upon any premises where he believes <strong>the</strong> Lot <strong>to</strong> be and<br />
remove it.<br />
7.3 If <strong>the</strong> Seller has rescinded <strong>the</strong> Sale and <strong>the</strong> Lot has been resold by<br />
<strong>the</strong> <strong>Auction</strong>eer and/or <strong>the</strong> Company or by <strong>the</strong> Seller, <strong>the</strong> Buyer shall<br />
reimburse <strong>the</strong> Seller with any shortfall where:-<br />
7.3.1 <strong>the</strong> resale price less <strong>the</strong> Sale price; and<br />
7.3.2 <strong>the</strong> costs incurred by <strong>the</strong> Seller incidental <strong>to</strong> <strong>the</strong> resale.<br />
7.4 If <strong>the</strong> Buyer fails <strong>to</strong> remove any Lot by <strong>the</strong> Clearance Date and Time<br />
specified:-<br />
7.4.1 <strong>the</strong> Seller may remove <strong>the</strong> Lot from <strong>the</strong> Location and leave it<br />
outside at <strong>the</strong> Buyer’s risk in all respects;<br />
7.4.2 <strong>the</strong> Seller may charge <strong>the</strong> Buyer for <strong>the</strong> reasonable costs <strong>of</strong><br />
s<strong>to</strong>rage;<br />
7.4.3 <strong>the</strong> Seller may charge <strong>the</strong> Buyer rent, taxes, men's wages<br />
and expenses incurred as a result <strong>of</strong> <strong>the</strong> Lot(s) remaining at<br />
<strong>the</strong> Location; and<br />
7.4.4 <strong>the</strong> Buyer shall indemnify <strong>the</strong> Seller against any loss,<br />
damages, expenses, claims or liabilities incurred by <strong>the</strong> Seller<br />
arising from <strong>the</strong> Buyer’s failure <strong>to</strong> remove <strong>the</strong> Lot from <strong>the</strong><br />
Location.<br />
8 Acknowledgements and Exclusion <strong>of</strong> Warranties<br />
8.1 The Buyer acknowledges that in agreeing <strong>to</strong> purchase any Lot he is<br />
not relying on any warranties or representations made by <strong>the</strong> Seller<br />
or <strong>the</strong> Company or any <strong>of</strong> <strong>the</strong>ir employee’s agents or<br />
representatives. All representations, warranties and conditions,<br />
express or implied, statu<strong>to</strong>ry or o<strong>the</strong>rwise in respect <strong>of</strong> all and any <strong>of</strong><br />
<strong>the</strong> Lots are expressly excluded and without limitation any<br />
warranties and conditions as <strong>to</strong> title, quiet possession, satisfac<strong>to</strong>ry<br />
quality, fitness for purpose and description are excluded <strong>to</strong> <strong>the</strong><br />
fullest extent as permitted by law.<br />
8.2 The Buyer fur<strong>the</strong>r acknowledges that nei<strong>the</strong>r <strong>the</strong> Sellers nor <strong>the</strong><br />
Company shall in any circumstances be liable <strong>to</strong> or <strong>to</strong> compensate<br />
<strong>the</strong> Buyer nor shall <strong>the</strong> Buyer be entitled <strong>to</strong> rescind <strong>the</strong> Sale or<br />
reject any Lot for an error omission or misstatement contained in<br />
<strong>the</strong> Catalogue and/or in <strong>the</strong> Special Conditions.<br />
8.3 The Buyer also acknowledges that:-<br />
8.3.1 all <strong>the</strong> Lots are purchased on <strong>the</strong> basis that risk <strong>of</strong> good title<br />
<strong>to</strong> all or any <strong>of</strong> <strong>the</strong>m passing <strong>to</strong> <strong>the</strong> Buyer is at <strong>the</strong> Buyer’s<br />
risk and without limitation <strong>the</strong> Lots are sold subject <strong>to</strong> any<br />
claims, liens, distraint and execution and subject <strong>to</strong> all<br />
leasing, hire or hire purchase agreements and reservation <strong>of</strong><br />
title claims (if any) in respect <strong>of</strong> <strong>the</strong>m;<br />
8.3.2 if it shall be found that <strong>the</strong> Seller does not have title <strong>to</strong> all or<br />
any <strong>of</strong> <strong>the</strong> Lots <strong>the</strong> Buyer shall have no right <strong>to</strong> rescind, avoid<br />
or vary this agreement or <strong>to</strong> claim damages or a reduction in<br />
<strong>the</strong> price paid or payable;<br />
8.3.3 anything found in, under, near or in any Lot which is not<br />
specifically included in <strong>the</strong> description <strong>of</strong> <strong>the</strong> Lot remains <strong>the</strong><br />
property <strong>of</strong> <strong>the</strong> Seller;<br />
8.3.4 any intellectual property rights or s<strong>of</strong>tware subsisting in a Lot<br />
may be third party property and as such <strong>the</strong> Seller and/or <strong>the</strong><br />
Company may be unable <strong>to</strong> effect transfer. The Buyer will not<br />
be authorised <strong>to</strong> use intellectual property rights or s<strong>of</strong>tware<br />
and any such use or transfer shall be at <strong>the</strong> Buyers sole risk.<br />
8.4 The Buyer undertakes that it shall ensure that any vehicle<br />
comprised in any Lot is in a roadworthy condition in accordance with<br />
<strong>the</strong> Road Vehicle (Construction and Use) Regulations 1986 and any<br />
subsequent amendments <strong>the</strong>re<strong>of</strong> or such o<strong>the</strong>r relevant regulations<br />
as shall from time <strong>to</strong> time be in force before using it on a public<br />
road. It is <strong>the</strong> Buyer’s responsibility <strong>to</strong> remove Company logos and<br />
lettering from vehicles. Odometer readings are not warranted.<br />
8.5 The Buyer acknowledges that any item <strong>of</strong> plant, machinery or<br />
equipment contained in <strong>the</strong> Lot(s) may not necessarily comply with<br />
any statu<strong>to</strong>ry requirements or regulations governing <strong>the</strong> use <strong>of</strong> that<br />
plant, machinery or equipment in <strong>the</strong>ir working environment. Nei<strong>the</strong>r<br />
<strong>the</strong> Seller nor <strong>the</strong> Company shall incur any liability <strong>to</strong> <strong>the</strong> Buyer<br />
because <strong>of</strong> any default or defect in all or any <strong>of</strong> <strong>the</strong> Lots. Buyers<br />
are entirely responsible for ensuring that <strong>the</strong> use <strong>of</strong> any item <strong>of</strong><br />
plant, machinery or equipment does not contravene any health and<br />
safety and environmental legislation in existence at <strong>the</strong> time <strong>of</strong> <strong>the</strong><br />
Sale.<br />
8.6 The Buyer acknowledges and agrees that <strong>the</strong> Company is acting<br />
only as agent <strong>of</strong> <strong>the</strong> Seller and it is expressly agreed and declared<br />
that no personal liability in connection with <strong>the</strong> Sale <strong>of</strong> any Lot or<br />
o<strong>the</strong>rwise shall fall on <strong>the</strong> Company and <strong>the</strong> Buyer shall indemnify<br />
<strong>the</strong> Company against all and any liabilities arising under or in<br />
connection with <strong>the</strong> Sale <strong>of</strong> any Lot. Insolvency Practitioner(s),<br />
including Administrative Receiver(s), Administra<strong>to</strong>r(s) and<br />
Liquida<strong>to</strong>r(s) act as agent(s) for <strong>the</strong> Seller without personal liability<br />
and shall incur no personal liability whatsoever in relation <strong>to</strong> a Sale<br />
or pursuant <strong>to</strong> any document relating <strong>the</strong>re<strong>to</strong>.<br />
8.7 The Buyer agrees that <strong>the</strong> General Conditions and <strong>the</strong> exclusions<br />
which <strong>the</strong>y contain are fair and reasonable bearing in mind that:-<br />
8.7.1 <strong>the</strong> Buyer must rely absolutely on <strong>the</strong> Buyer’s own opinion<br />
and/or pr<strong>of</strong>essional advice concerning <strong>the</strong> quality, state,<br />
condition, performance and functionality <strong>of</strong> <strong>the</strong> Lots any right,<br />
title or interest which is sold under <strong>the</strong> terms <strong>of</strong> <strong>the</strong>se General<br />
Conditions, <strong>the</strong>ir fitness and suitability for any particular or<br />
any purpose, <strong>the</strong> possibility that some or all <strong>of</strong> <strong>the</strong>m may<br />
have defects not apparent on inspection and examination<br />
including, without limitation, <strong>the</strong> presence <strong>of</strong> contamination<br />
and <strong>the</strong> possibility that <strong>the</strong> Buyer may not acquire title and <strong>the</strong><br />
fact that <strong>the</strong> Buyer would have no remedy under this<br />
Agreement should that happen;<br />
8.7.2 <strong>the</strong> Buyer has available <strong>to</strong> it skilled pr<strong>of</strong>essional advice and<br />
on that basis agrees <strong>to</strong> purchase a Lot for a consideration<br />
calculated <strong>to</strong> take in<strong>to</strong> account amongst o<strong>the</strong>r things <strong>the</strong> risk<br />
<strong>to</strong> it represented by <strong>the</strong> fact that <strong>the</strong> parties believe that all<br />
<strong>the</strong> exclusions and limitations set out in <strong>the</strong>se General<br />
Conditions would be recognised as being fully effective by <strong>the</strong><br />
Courts and <strong>the</strong> Seller making it clear that it would not have<br />
agreed <strong>to</strong> sell any Lot on any o<strong>the</strong>r basis except for a higher<br />
consideration;<br />
8.7.3 <strong>the</strong> Buyer has been given every opportunity which might<br />
reasonably be expected <strong>to</strong> examine and inspect <strong>the</strong> Lots.<br />
8.8 Notwithstanding anything else in <strong>the</strong>se General Conditions, <strong>the</strong><br />
Seller’s and <strong>the</strong> Company’s <strong>to</strong>tal liability under or in connection with<br />
<strong>the</strong> Sale <strong>of</strong> any Lot, whe<strong>the</strong>r in respect <strong>of</strong> breach <strong>of</strong> contract, <strong>to</strong>rt<br />
(including negligence), breach <strong>of</strong> statu<strong>to</strong>ry duty or o<strong>the</strong>rwise,<br />
including consequential loss, shall be limited in aggregate <strong>to</strong> <strong>the</strong><br />
price paid for <strong>the</strong> Lot or if no price has been paid <strong>the</strong>n <strong>the</strong> higher <strong>of</strong><br />
<strong>the</strong> market value or reserve price for <strong>the</strong> Lot. This General<br />
Condition 8.8 does not apply <strong>to</strong> liability for death or personal injury.<br />
8.9 The Buyer acknowledges that a Sale by <strong>Auction</strong> is not a consumer<br />
sale for <strong>the</strong> purposes <strong>of</strong> <strong>the</strong> Sale <strong>of</strong> Goods Act 1979 (as amended<br />
by <strong>the</strong> Sale and Supply <strong>of</strong> Goods Act 1994) and <strong>the</strong> Unfair Contract<br />
Terms Act 1977 and <strong>the</strong> Buyer shall not seek <strong>to</strong> rely upon and<br />
conditions or warranties implied <strong>the</strong>reby or by any o<strong>the</strong>r legislation.
SPECIAL CONDITIONS OF SALE<br />
Seller:<br />
On <strong>the</strong> instructions <strong>of</strong> The Wyndeham Press Group Ltd & O<strong>the</strong>rs.<br />
Location:<br />
21 & 29 Kingsland Grange, Wools<strong>to</strong>n, nr. Warring<strong>to</strong>n, Cheshire UK, WA1 4RW<br />
Order <strong>of</strong> sale:<br />
Directions:<br />
Lots<br />
1-6A Web Presses & In-Line Finishing (see note re combination lots)<br />
7-67 Press & In-Line Finishing Equipment Spares & Equipment<br />
67A-71 Bindery Equipment<br />
72-79 Pre-Press Equipment<br />
80-89 Regenerative Thermal Oxidisers & Waste Collection Plant<br />
90-146 Air Compressors, Lifting Equipment & Packaging Equipment<br />
147-278 General Fac<strong>to</strong>ry Equipment<br />
279-279E Private & Commercial Vehicles<br />
280-387 General Fac<strong>to</strong>ry Equipment<br />
388-417D Fitters Shop Equipment<br />
418-477 Office Furniture & Equipment<br />
Leave M6 mo<strong>to</strong>rway at exit 21 signposted A57 Warring<strong>to</strong>n (Ctr), Irlam. At roundabout(s) take exit signposted Birchwood<br />
B5210. Carry straight on at <strong>the</strong> first two roundabouts following signs for Birchwood B5210 and at <strong>the</strong> third roundabout turn<br />
left signposted Kingsland Grange. Continue down road and turn right in<strong>to</strong> Kingsland Grange, <strong>the</strong>n take first left in<strong>to</strong> yard.<br />
Viewing:<br />
From 9am <strong>to</strong> 4pm Thursday 13 Oc<strong>to</strong>ber and Tuesday 18 Oc<strong>to</strong>ber 2011 or by appointment with <strong>the</strong> Company.<br />
Access <strong>to</strong> <strong>the</strong> Location is allowed on <strong>the</strong> understanding that all persons attend <strong>the</strong> Location entirely at <strong>the</strong>ir own risk and<br />
are responsible for and will indemnify <strong>the</strong> Seller and <strong>the</strong> Company against any losses damage or claims occasioned by<br />
<strong>the</strong>ir presence at <strong>the</strong> Location.<br />
Children under <strong>the</strong> age <strong>of</strong> 16 will not be allowed access <strong>to</strong> <strong>the</strong> Location.<br />
Registration:<br />
All bidders must register <strong>the</strong>ir details with <strong>the</strong> Company and provide identification where required. In <strong>the</strong> case <strong>of</strong> Live<br />
<strong>Auction</strong>s by way <strong>of</strong> <strong>the</strong> registration form provided at <strong>the</strong> Live <strong>Auction</strong> or in <strong>the</strong> Catalogue and in <strong>the</strong> case <strong>of</strong> <strong>Online</strong><br />
<strong>Auction</strong>s, online at <strong>the</strong> Website (www.bidspotter.co.uk).<br />
Bidding:<br />
The General Conditions and <strong>the</strong> Special Conditions apply <strong>to</strong> all Sales by way <strong>of</strong> <strong>Auction</strong>, private treaty and tender and in<br />
<strong>the</strong> case <strong>of</strong> any Bids placed by way <strong>of</strong> an <strong>Online</strong> <strong>Auction</strong> stress that all Bidders must read and understand Bidspotter’s<br />
terms and conditions <strong>of</strong> registration at www.bidspotter.co.uk.<br />
At <strong>the</strong> close <strong>of</strong> <strong>the</strong> timed <strong>Online</strong> <strong>Auction</strong> Sale final Bid figures will be submitted <strong>to</strong> <strong>the</strong> Seller for its approval and any Bid<br />
shall be subject <strong>to</strong> approval and acceptance by <strong>the</strong> Company and/or <strong>the</strong> Seller. No Bid may be withdrawn and <strong>the</strong><br />
Company/Seller does not bind himself <strong>to</strong> accept <strong>the</strong> highest Bid or any o<strong>the</strong>r Bid placed in <strong>the</strong> course <strong>of</strong> <strong>the</strong> <strong>Online</strong><br />
<strong>Auction</strong> Sale.<br />
Buyer's Premium:<br />
Buyers will pay a Buyer's premium <strong>of</strong> 15% (plus VAT) <strong>of</strong> <strong>the</strong> purchase price for each Lot purchased whe<strong>the</strong>r by <strong>Auction</strong> or,<br />
private treaty or tender. The Buyer's Premium is payable by <strong>the</strong> Buyer <strong>to</strong> <strong>the</strong> Company in accordance with <strong>the</strong> General<br />
Conditions and, for <strong>the</strong> avoidance <strong>of</strong> doubt is payable in addition <strong>to</strong> <strong>the</strong> purchase price for <strong>the</strong> Lot. The Buyer's Premium<br />
is not negotiable and is payable by all Buyers.<br />
Deposit:<br />
Buyers shall pay a deposit <strong>of</strong> 25% (plus VAT) <strong>of</strong> <strong>the</strong> purchase price for each Lot purchased as requested by <strong>the</strong> Company<br />
pursuant <strong>to</strong> <strong>the</strong> General Conditions and <strong>the</strong>se Special Conditions. The company reserve <strong>the</strong> right <strong>to</strong> take a deposit by<br />
way <strong>of</strong> a credit/ debit card payment from <strong>the</strong> card presented for registration if <strong>the</strong> payment terms below are not complied<br />
with.
Payment:<br />
All Lots shall be paid for in full within 48 hours <strong>of</strong> <strong>the</strong> conclusion <strong>of</strong> <strong>the</strong> Sale and shall be at <strong>the</strong> Buyer's risk immediately<br />
upon <strong>the</strong> conclusion <strong>of</strong> <strong>the</strong> sale.<br />
Telegraphic Transfer - Bank details for telegraphic transfer:<br />
Account: <strong>Sanderson</strong> Wea<strong>the</strong>rall LLP P & M Clients Account<br />
Bank: Barclays Bank Plc, Albion Street, Leeds<br />
Sort Code: 20-48-46<br />
Account Number: 10931950<br />
SWIFTCODE - BARCGB22<br />
IBANGB84BARC20484610931950<br />
Cash - In view <strong>of</strong> Money Laundering Regulations <strong>the</strong> Company reserves <strong>the</strong> right <strong>to</strong> refuse payment in cash. Payments in<br />
cash <strong>of</strong> more than £7,500 will not, in any circumstances, be accepted.<br />
Bankers Draft/ Cheques: (made payable <strong>to</strong> <strong>Sanderson</strong> Wea<strong>the</strong>rall LLP P & M Clients Account) will only be accepted on<br />
<strong>the</strong> basis that any Lots are not removed until cleared funds are in <strong>the</strong> Company's client account.<br />
Debit Cards: The Company accepts debit cards for payment <strong>of</strong> invoices (subject <strong>to</strong> a surcharge <strong>of</strong> 2.5% - £5 minimum<br />
fee). Credit cards will only be accepted for deposit payments referred <strong>to</strong> under <strong>the</strong> ‘Deposit’ section above.<br />
All sums payable under <strong>the</strong> General Conditions and <strong>the</strong>se Special Conditions are exclusive <strong>of</strong> any applicable VAT for<br />
which <strong>the</strong> Buyer shall be additionally liable <strong>to</strong> pay <strong>to</strong> <strong>the</strong> Company.<br />
Clearance:<br />
All lots must be cleared without fail by 4pm FRIDAY 9 DECEMBER 2011, such date and time being <strong>the</strong> Clearance<br />
Date and Time as referred <strong>to</strong> in <strong>the</strong> General Conditions, REMOVAL OF ALL LOTS WILL BE STRICTLY BY<br />
APPOINTMENT, please see <strong>the</strong> Company's invoice for contact details.<br />
Collection from site is <strong>the</strong> Buyer’s responsibility, <strong>the</strong> Company/ Seller do not provide a packing/ delivery service.<br />
Reserve Removal:<br />
Lots sold subject <strong>to</strong> a reserve removal will ei<strong>the</strong>r be indicated in <strong>the</strong> Catalogue with <strong>the</strong> date <strong>of</strong> availability or will be<br />
identified by <strong>the</strong> <strong>Auction</strong>eer at <strong>the</strong> point <strong>of</strong> Sale. A Deposit will be payable as with o<strong>the</strong>r lots but in this instance payment in<br />
full can be left until five (5) working days prior <strong>to</strong> availability. Unless specified <strong>to</strong> <strong>the</strong> contrary such Lots must be removed<br />
from <strong>the</strong> Location not later than <strong>the</strong> Clearance Date and Time specified for final removal in <strong>the</strong>se Special Conditions.<br />
Fire Alarm:<br />
In case <strong>of</strong> a fire alarm all visi<strong>to</strong>rs and contrac<strong>to</strong>rs are <strong>to</strong> exit buildings and report <strong>to</strong> <strong>the</strong> Muster Point.<br />
Smoking:<br />
No smoking on site. Food and Drink is only <strong>to</strong> be consumed in designated areas.<br />
Safety:<br />
All persons including Buyers, <strong>the</strong>ir employees, agents, representatives and contrac<strong>to</strong>rs are reminded that <strong>the</strong>y are<br />
responsible for <strong>the</strong>ir own safety on site and enter at <strong>the</strong>ir own risk and should take <strong>the</strong> precaution <strong>of</strong> wearing protective<br />
clothing as appropriate.<br />
Finance:<br />
If Buyers wish <strong>to</strong> purchase Lots with <strong>the</strong> help <strong>of</strong> a finance company <strong>the</strong>y should make arrangements well in advance <strong>of</strong> <strong>the</strong><br />
Sale <strong>to</strong> ensure that <strong>the</strong>y are able <strong>to</strong> make payment in accordance with <strong>the</strong> General Conditions.<br />
Overseas Buyers:<br />
Overseas Buyers should ensure that <strong>the</strong> country <strong>to</strong> which <strong>the</strong> items are destined:-<br />
• holds no import restrictions on <strong>the</strong> goods <strong>to</strong> be purchased;<br />
• has no import licence restrictions or a restriction on currency allocation;<br />
• has no prolonged inspection procedure which might cause excess delay or refusal in allowing your goods <strong>to</strong> be<br />
imported.<br />
Overseas Buyers will receive a fully descriptive invoice in order that <strong>the</strong>y may arrange payment as soon as possible with<br />
<strong>the</strong> Company's bank, Barclays Bank plc, Albion Street, Leeds LS1.
Overseas Buyers should employ a suitable freight forwarding organisation. Please note that many <strong>of</strong> <strong>the</strong> machinery<br />
removal companies in <strong>the</strong> United Kingdom are not necessarily freight forwarders. The [Seller and/or Company] will be<br />
pleased <strong>to</strong> advise accordingly.<br />
The Company makes no representation and accepts no liability whatsoever <strong>to</strong> any Buyer in respect <strong>of</strong> <strong>the</strong> issuance or<br />
validity <strong>of</strong> any exportation or importation permits or <strong>the</strong> existence and exercise <strong>of</strong> exportation or importation regulations or<br />
any compulsory purchasing regimes.<br />
VAT Payments and Returns:<br />
All overseas Buyers (EU and non EU) will be charged VAT at <strong>the</strong> current rate on each Lot purchased. This will be<br />
refunded <strong>to</strong> <strong>the</strong> overseas Buyer as soon as <strong>the</strong> Seller receives a <strong>copy</strong> <strong>of</strong> <strong>the</strong> bill <strong>of</strong> lading as pro<strong>of</strong> <strong>of</strong> export,<br />
providing this documentation is received within 3 months <strong>of</strong> <strong>the</strong> sale date. The Seller is unable <strong>to</strong> refund <strong>the</strong> VAT<br />
on <strong>the</strong> Buyer’s Premium <strong>to</strong> non EU countries.<br />
Export Clause<br />
Please note that <strong>the</strong> Buhrs Polywrapping Lines (Lots 68 & 69) are sold subject <strong>to</strong> an export clause. These<br />
machines are being <strong>of</strong>fered with <strong>the</strong> proviso that <strong>the</strong>y must be exported for use outside <strong>of</strong> mainland UK and<br />
purchasers will be required <strong>to</strong> sign an undertaking <strong>to</strong> this effect and supply suitable pro<strong>of</strong> <strong>of</strong> shipment (bill <strong>of</strong><br />
lading, etc).We reserve <strong>the</strong> right <strong>to</strong> rescind <strong>the</strong> sale if <strong>the</strong>se conditions are not complied with.<br />
Lot<br />
Description<br />
UNIT 21<br />
Note <strong>the</strong> Web Printing Presses & Finishing Lines are <strong>of</strong>fered for sale both individually or as a<br />
combination (one lot contract), with <strong>the</strong> combination lots beginning <strong>to</strong> close from 2pm).<br />
At <strong>the</strong> conclusion <strong>of</strong> <strong>the</strong> sale all bids will be considered by our client.<br />
1 MAN Roland UNISET 75 HEATSET WEB OFFSET 64 PAGE QF FOUR COLOUR PRESS, serial no.<br />
11355 (2004), 630mm cut-<strong>of</strong>f, 950mm web width,<br />
Lower Web, CD13 S Independent Split Arm Reelstand, serial no. 313497 (RZF. manu, serial no. 313499);<br />
Zugwerk ICP1350 Infeed Unit, serial no. 311346, Erhardt & Leimer DR5121 Web Guide, serial no.<br />
302752, 100/1100mm; Four ISC-DE/AL 630 Blanket/Blanket Colour Print Units, serial nos. 313484,<br />
313485, 313486, 313487, with OxyDry Au<strong>to</strong>matic Blanket Washers, Turbo Damping and Au<strong>to</strong>matic Ink<br />
Filling; Megtec DDIII 9.1/1066 Gas Fired Dryer, ref no. 0155SD/JN117873, year <strong>of</strong> marketing 2004, paper<br />
width 965mm with Siemens Simatic Touch Panel PC Control; Five Roll Chill Roll Stand with Erhardt &<br />
Leimer Web Guide, QuadTech RGS V-I Register Control System, Silicone Applica<strong>to</strong>r with feed tank;<br />
QuadTech Cut-<strong>of</strong>f Control; (pits in floor <strong>to</strong> be filled & screeded following removal <strong>of</strong> equipment)<br />
Upper Web, CD13 S Independent Split Arm Reelstand, serial no. 313496 (RZF. Manu, serial no. 313499);<br />
Zugwerk ICP1350 Infeed Unit, serial no. 313498, with Erhardt & Leimer DR5121 Web Guide, serial no.<br />
302752, 100/1100mm; Four ISC-DE/AL 630 Blanket/ Blanket Colour Print Units, serial nos. 313488,<br />
313489, 313490,313491 with OxyDry Au<strong>to</strong>matic Blanket Washers, Turbo Damping and Au<strong>to</strong>matic Ink<br />
Filling; MegTech DDIII9.1/1066 Gas Fired Dryer, ref no. 0156SD/JN117874, year <strong>of</strong> marketing 2004,<br />
paper width 965mm with Siemens Simatic Touch Panel PC Control; extraction ducting (from both dryers)<br />
<strong>to</strong> three way main junction, (hole in ro<strong>of</strong> <strong>to</strong> be made good by purchaser), Five Roll Chill Roll Stand with<br />
Erhardt & Leimer Web Guide, QuadTech RGS V-I Register Control System, Silicone Applica<strong>to</strong>r with feed<br />
tank; QuadTech Cut-<strong>of</strong>f Control; KFN.SC Folder, serial no. 313573 (2005) <strong>to</strong> produce 32pp tabloid, 64pp<br />
A4, 128pp double parallel; Plana<strong>to</strong>l Seam S<strong>of</strong>tening System; Two LSZ-Uniset Control Consoles, serial<br />
nos. 313523, 313524 with MegTech Epsilon Emissions Alarm Panel; Baldwin Kaltenzentrale CCS 300<br />
Chiller System, serial no. 2964-132 (2004) with Pumpschrank 898-2-1-M Unit, serial no. 2902-0283<br />
(2004) and Pumpschrank 898-2-2 Unit, serial no. 2902-0280 (2004); Baldwin Fount Water Chilling<br />
Cabinet; Two OxyDry Blanket wash Feed & Control Units; Baumuller Diagnostic System; Firetrace<br />
Au<strong>to</strong>matic Fire extinguisher System; Rolled Steel Press Platform with two staircases and handrails; Three<br />
Pit Mounted Reel Turntables, Au<strong>to</strong>matic Reel Lift, Two Reel Carts, Sliding Reel Cradle and Guide rail<br />
System;<br />
In Outside Yard, three Baldwin Searle DKG80 6 Water/ Glycol(2) Triple Fan Condenser Units, serial<br />
nos. 299869, 299860, 299870 and Baldwin Single Fan Condenser Unit, flow/ return piping <strong>to</strong> press &<br />
equipment (holes in wall <strong>to</strong> be made good by purchaser),<br />
main isola<strong>to</strong>r switch & power distribution panels (no main incoming cable included – available privately) ink<br />
piping <strong>to</strong> be disconnected where indicated<br />
V.200711
Lot<br />
Description<br />
2 Muller Martini PRESS IN-LINE FINISHING LINE comprising; 7208.000.22 Four Band Link Conveyor<br />
approx 600mm between centres, serial no. MMZO 909 324-40 (2005); 7230.0410 Copy Eleva<strong>to</strong>r &<br />
Overhead Conveyor, serial no. MMZO 909 324-50 (2005); 7230.0430 Copy Receiving Station, serial no.<br />
MMZO 909 324-60 (2005); 7235.000.29 Four Band Discharge Conveyor, serial no. MMZO 909 324-70;<br />
0569.0420 Inclined Belt Conveyor 420mm x 4300mm between centres, serial no. MMZO 909 324-100;<br />
0366.000.20 Four Band Link Conveyor 900mm between centres, serial no. MMZO 909 324-110;<br />
0366.0418 Divert Gate, serial no. MMZO 909 324-120; Transnorm KT58 Turn Belt Conveyor 600mm x<br />
approx 1500mm between centres, serial no. 909 324/0130; 0569.0440 Two Section Part Inclined Removal<br />
Conveyor 380mm x 1000mm between centres and 380mm x 1900mm between centres with <strong>copy</strong>holder<br />
chain, serial no. MMZO 909 324-110; 7208.000.22 Four Band Conveyor 1700mm between centres, serial<br />
no. MMZO 909 325-10 with Baumer Scantec-1 Laser Scanner Counter; 7230.0410 Copy Eleva<strong>to</strong>r, serial<br />
no. MMZO 909 325-20; High Level Copy Conveyor approx. 60m between centres; 7230.0430 Copy<br />
Receiving Station, serial no. MMZO 909 325-30; 0570.0430 Belt Conveyor 420mm x 700mm between<br />
centres, serial no. MMZO 909 325-40; 0366.0418 Divert Gate, serial no. MMZO 909 325-60; Transnorm<br />
KT58 Turn Belt Conveyor 600mm x approx 1500mm between centres, serial no. 909325/0070 (2004);<br />
0366.0414 Discharge Station, serial no. MMZO 909 325-80; 0569.0420 Inclined Belt Conveyor 420mm x<br />
3700mm between centres, serial no. MMZO 909 325-90; 0377.0405 Avanti Plus Horizontal Log Stacker,<br />
serial no. MMZO 909 322-10 (2004); 0443.0400 Palletiser, serial no. MMZO 909 323-10 with Leuze<br />
Lumiflex Pho<strong>to</strong>-electric Beam Guard (see lots 62-65)<br />
2A<br />
COMBINATION LOT 1 & 2 (one lot contract), note - bidding on this lot will close from 2pm<br />
3 MAN Roland/ Plamag UNISET 70 HEATSET WEB OFFSET 64 PAGE QF FOUR COLOUR PRESS,<br />
serial no. 11093, 630mm cut-<strong>of</strong>f, 950mm web width; Lower Web; Reelpaster Fixed Arm Reelstand, serial<br />
no. 300621; Zugwerk ICP 1350 In-feed Unit, serial no. 301765, with Erhardt & Leimer DR7111 Web<br />
Guide, serial no. 232502, 120/1100mm; Four Blanket/Blanket Colour Print Units with OxyDry Au<strong>to</strong>matic<br />
Blanket Washers, Turbo Damping and Au<strong>to</strong>matic Ink Filling; Megtec Dual Dry III 9.1/1066 Gas Fired<br />
Dryer, ref no. 0005-SD, year <strong>of</strong> marketing 1999, paper width 965mm, with Siemens Simatic PC FI 10<br />
Touch Panel Control; Five Roll Chill Roll Stand, with Web Guide, Register Control System and Silicone<br />
Applica<strong>to</strong>r; Cut-<strong>of</strong>f Control; (pits in floor <strong>to</strong> be filled & screeded following removal <strong>of</strong> equipment)<br />
Upper Web; Reelpaster Fixed Arm Reelstand, serial no. 300620; Zugwerk ICP 1350 In-feed Unit, serial<br />
no. 301766, with Erhardt & Leimer DR7111 Web Guide, serial no. 232502, 120/1100mm; Four<br />
Blanket/Blanket Colour Print Units, with OxyDry au<strong>to</strong>matic Blanket Washers, Turbo Damping and<br />
Au<strong>to</strong>matic Ink Filling; Megtec Dual Dry III 9.1/1066 Gas Fired Dryer, ref no. 0006-SD, year <strong>of</strong> marketing<br />
1999, paper width 965mm, with Siemens Simatic PC FI 10 Touch Panel Control; extraction ducting (from<br />
both dryers) <strong>to</strong> three way main junction, (hole in ro<strong>of</strong> <strong>to</strong> be made good by purchaser); Five Roll Chill Roll<br />
Stand, with Web Guide, Register Control System and Silicone Applica<strong>to</strong>r; Cut-<strong>of</strong>f Control; KFN 80. PF/AL<br />
630 Folder, serial no. 301733, <strong>to</strong> produce 32pp tabloid, 64pp A4,128pp double parallel; Plana<strong>to</strong>l Opimatic<br />
CombiJet Seam S<strong>of</strong>tening & Glueing System, serial no. 4014473; Pecom Two Opera<strong>to</strong>r Control Console<br />
with Megtec Epsilon Emissions Alarm Panel; Baldwin Kohlzentrale CCS 240 Chiller System, serial no.<br />
850-124, (1999), with IRCTS 850-1200 HS/WD Unit, serial no. 121, and 851-600 HS/WAD Unit, serial no.<br />
5543; Two OxyDry Blanket Wash Feed & Control Units; Firetrace Au<strong>to</strong>matic Fire Extinguisher System;<br />
Rolled Steel Press Platform with two staircases and handrails; Two Pit Mounted Reel Turntables; Two Reel<br />
Carts, Sliding Reel Cradle and Guide Rail System;<br />
In Outside Yard, three Searle DKR80-6 Water Glycol Triple Fan Condenser Units, serial nos. 121680,<br />
121678, 121679 and Baldwin Single Fan Condenser Unit, flow/ return piping <strong>to</strong> press & equipment, main<br />
isola<strong>to</strong>r switch & power distribution panels (no mains incoming cable included – available privately), ink<br />
piping <strong>to</strong> be disconnected where indicated<br />
4 Muller Martini PRESS IN-LINE FINISHING LINE comprising; 7208.000.07 Four Band Link Conveyor,<br />
600mm between centres, serial no. 146057-20,(1999); 7230.000.05 Copy Eleva<strong>to</strong>r & Overhead Conveyor,<br />
serial no. 146057-30, (1999); 7230.000.07 Copy Receiving Station, serial no. 146057-40, (1999); Four<br />
Band Discharge Conveyor, serial no. 146057-50 (1999); Inclined Belt Conveyor, 420mm x 4030mm<br />
between centres; Four Band Conveyor, 925mm between centres; 0366.0418 Divert Gate, serial no. MMZO<br />
146058, (1999); 6248 Turn Conveyor, 425mm x approx. 1500mm between centres; Two Section Part<br />
Inclined Removal Conveyor, 380mm x 1020mm between centres and 320mm x 1900mm between centres<br />
with <strong>copy</strong>holder chain; 7208.000.07 Four Band Conveyor, 1700mm between centres, serial no. 146057-<br />
110, (1999), with Baumer Scantec-1 Laser Scanner Counter; 7230.000.05 Copy Eleva<strong>to</strong>r, serial no.<br />
146057-120, (1999); Control Panel, High Level Copy Conveyor, approx 40m between centres; 7230.000.07<br />
Copy Receiving Station, serial no. 146057-130, (1999); Belt Conveyor, 420mm x 750mm between centres;<br />
0366.0418 Divert Gate, serial no. MMZO 146058, (1999);Inclined Four Band Conveyor, 3725mm between<br />
centres; 0377.0401 Avanti Horizontal Log Stacker, serial no. MMZO 146045, (1999); 0397.000.17<br />
Palletiser, serial no. 146059, with pho<strong>to</strong>-electric guards; 0366.0404 Bump Turn Unit, serial no. MMZO<br />
154624, (1999); Two Section Belt Conveyor with air hydraulic lift <strong>to</strong> one section, 420mm x 900mm<br />
between centres and 420mm x 500mm between centres; Four Band Conveyor, 800mm between centres;<br />
0441.04.00 Exac<strong>to</strong> Trimmer, serial no. 14606.0, (1999); 0441.0420 Bump Turn Unit, serial no. MMZO<br />
146060, (1999); Exac<strong>to</strong> Trimmer; Four Band Conveyor, 2900mm between centres; 7526.0401 Forte<br />
Stacker, serial no. 97.03442, (1999); Air Assisted Ball Table with blower fan (see lots 62-65)
Lot<br />
4A<br />
Description<br />
COMBINATION LOT 3 & 4 (one lot contract), note - bidding on this lot will close from 2.20pm<br />
5 MAN Roland/ Plamag UNISET 70 HEATSET WEB OFFSET 64 PAGE QF FOUR COLOUR PRESS,<br />
serial no. 11063, (1999), 630mm cut-<strong>of</strong>f, 950mm web width;<br />
Lower Web; Reelpaster Fixed Arm Reelstand, serial no. 300623; Zugwerk ICP1350 In-feed Unit, serial no.<br />
300762, with Erhardt & Leimer DR7111 Web Guide, serial no. 232502, 120/1100mm; Four<br />
Blanket/Blanket Colour Print Units, with OxyDry Au<strong>to</strong>matic Blanket Washers, Turbo Damping and<br />
Au<strong>to</strong>matic Ink Filling; Megtec Dual Dry III 9.1/1066 Gas Fired Dryer, ref no. 0028-PZ, year <strong>of</strong> marketing<br />
1999, paper width 965mm, with Siemens Simatic PC FI 10 Touch Panel Control; Five Roll Chill Roll Stand<br />
with Web Guide, Register Control System and Silicone Applica<strong>to</strong>r; Cut-<strong>of</strong>f Control; (pits in floor <strong>to</strong> be filled<br />
& screeded following removal <strong>of</strong> equipment)<br />
Upper Web; Reelpaster Fixed Arm Reelstand, serial no. 300619; Zugwerk ICP1350 In-feed Unit, serial no.<br />
300763, with Erhardt & Leimer DR7111 Web Guide, serial no. 232502 120/1100mm; Four<br />
Blanket/Blanket Colour Print Units with OxyDry Au<strong>to</strong>matic Blanket Washers, Turbo Damping and<br />
Au<strong>to</strong>matic Ink Filling; Megtec Dual Dry III 9.1/1066 Gas Fired Dryer, ref no. 0029-PZ, year <strong>of</strong> marketing<br />
1999, paper width 965mm, with Siemens Simatic PC FI 10 Touch Panel Control; extraction ducting (from<br />
both dryers) <strong>to</strong> three way main junction (hole in ro<strong>of</strong> <strong>to</strong> be made good by <strong>the</strong> purchaser); Five Roll Chill Roll<br />
Stand, with Web Guide, Register Control System and Silicone Applica<strong>to</strong>r; Cut-<strong>of</strong>f Control; KFN 80/AL 630<br />
Folder, serial no. 300753, <strong>to</strong> produce, 32pp tabloid, 64pp A4, 128pp double parallel; Plana<strong>to</strong>l Opimatic<br />
CombiJet Seam S<strong>of</strong>tening & Glueing System, serial no. 4014249; Pecom Two Opera<strong>to</strong>r Control Console<br />
with Megtec Epsilon Emissions Alarm Panel; Baldwin CCS240-850 Chiller System, serial no. 123, (1999),<br />
with Pumpschrank 898-2-1-M Unit, serial no. 119, (1998), and Pumpschrank 898-2-2- M Unit, serial no.<br />
120, (1998); Two OxyDry Blanket Wash Feed & Control Units; Firetrace Au<strong>to</strong>matic Fire Extinguisher<br />
System; Rolled Steel press Platform with two staircases and handrails; Two Pit Mounted Reel Turntables;<br />
Reel Cart, Sliding Reel Cradle and Guide Rail System;<br />
In Outside Yard, three Searle DKR80-6 Water Glycol Triple Fan Condenser Units, serial nos.<br />
115763,115762, 115764 and Baldwin Single Fan Condenser Unit, flow/ return piping <strong>to</strong> press &<br />
equipment, main isola<strong>to</strong>r switch & power distribution panels (no mains incoming cable included – available<br />
privately), ink piping <strong>to</strong> be disconnected where indicated<br />
6 Muller Martini PRESS IN-LINE FINISHING LINE comprising; 7208.000.07 Four Band Link Conveyor,<br />
600mm between centres, serial no. MMZO 146050, (1999); 7230.000.05 Copy Eleva<strong>to</strong>r & Overhead<br />
Conveyor, serial no. MMZO 146050, (1999); 7230.000.07 Copy Receiving Station, serial no. MMzo<br />
146050; Four band Discharge Conveyor; Inclined Belt Conveyor, 420mm x 4030mm between centres;<br />
Four Band Conveyor, 925mm between centres; 0366.0418 Divert Gate, serial no. MMZO 154624, (1999);<br />
Turn Belt Conveyor, 490mm x approx. 1400mm between centres; Two Section Part Inclined Removal<br />
Conveyor, 370mm x 1020mm between centres and 320mm x 1850mm between centres with <strong>copy</strong>holder<br />
chain; 7208.000.07 Four Band Conveyor, 1700mm between centres, serial no. MMZO 146047, (1999),<br />
with Baumer Scantec -1 Laser Scanner Counter; 7230.000.05 Copy Eleva<strong>to</strong>r, serial no. MMZO 146047,<br />
(1999); Control Panel; High Level Copy Conveyor approx. 25m between centres; 7230.000.07 Copy<br />
Receiving Station, serial no. MMZO 146047, (1999); Belt Conveyor, 420mm x 750mm between centres<br />
with air hydraulic lift; 0366.0418 Divert Gate, serial no. MMZO 154624; Inclined Four Band Conveyor,<br />
3725mm between centres; 0377.0401 Avanti Horizontal Log Stacker, serial no. MMZO 146059, (1999);<br />
0397.0400.16 Palletiser, serial no. 146045, (1999), with pho<strong>to</strong>-electric guard; 0366.0404 Bump Turn Unit,<br />
serial no. MMZO 146058; Two Section Belt Conveyor, 420mm x 900mm between centres and 420mm x<br />
500mm between centres with air hydraulic lift; Four band Conveyor, 800mm between centres; 0286.0405<br />
Insert Station, serial no. MMZO 222831-15, (1999); 0366.000.90 Six Band Feed Conveyor, 900mm<br />
between centres, serial no. MMZO 222831-16, (1999); 0441.0440 Exac<strong>to</strong> Trimmer, serial no. MMZO<br />
146046, (1999); 0441.0420 Bump Turn Unit, serial no. MMZO 146046, (1999); Exac<strong>to</strong> Trimmer; Four<br />
Band Conveyor, 2900mm between centres; 7526.0401 Forte Stacker, serial no. 97.03441, (1999); Air<br />
Assisted Ball Table with blower fan (see lots 62-65)<br />
6A<br />
COMBINATION LOT 5 & 6 (one lot contract), note - bidding on this lot will close from 2.40pm
Lot<br />
Description<br />
7 Muller Martini 0441 Rotary Trimmer Knife<br />
Grinding Machine, serial no. 146046/<br />
151671, with two re-ground trimmer heads<br />
and stands, sharpening accessories &<br />
double door cupboard<br />
7A<br />
7B<br />
7C<br />
7D<br />
7E<br />
Strapping Machine Test Arch<br />
Noise Control Centre Sectional Acoustic<br />
Part Glazed Panelling Forming Press<br />
Control Area, 26.4m x 3.8m x 3.9m high,<br />
with elevated wall panelling <strong>to</strong> part,<br />
suspended fluorescent lighting & fresh air<br />
ducting<br />
Daylight Viewing Booth, 4.3m wide<br />
Daylight Viewing Booth, 4.3m wide<br />
Daylight Viewing Booth, 4.3m wide<br />
8 500kg cap. Steel Mesh Cased Goods Lift<br />
<strong>to</strong> upper Press Level, with cage 900mm x<br />
1200 x approx. 1630mm, 4.3m high & CM<br />
Lodestar 1000kg Suspended Electric<br />
Chainblock (situated between Lot 1 & Lot 3)<br />
UNISET PRESS SPARES<br />
9 Roller Quarter Fold Tape Delivery &<br />
Ducting, on pallet (suitable for Uniset 70<br />
presses)<br />
10 Assorted Press Spares, on pallet (suitable<br />
for Uniset 70 presses), with plastic stacking<br />
bins<br />
11 Assorted Press Spares, on pallet (suitable<br />
for Uniset 70 presses), with plastic stacking<br />
bins<br />
12 Assorted Press Spares, on pallet (suitable<br />
for Uniset 70 presses)<br />
13 Assorted Press Spares, on pallet (suitable<br />
for Uniset 70 presses), with plastic stacking<br />
bins<br />
14 Assorted Press Spares, on pallet (suitable<br />
for Uniset 70 presses), with plastic stacking<br />
bins<br />
15 Assorted Press Spares, on pallet (suitable<br />
for Uniset 70 presses), with plastic stacking<br />
bins<br />
16 Assorted Press Spares, on pallet (suitable<br />
for Uniset 70 presses)<br />
17 Electrical Press Spares, on pallet (suitable<br />
for Uniset 70 presses), with plastic stacking<br />
bins<br />
18 Electrical Press Spares, on pallet (suitable<br />
for Uniset 70 presses)<br />
19 Electrical Press Spares, on pallet (suitable<br />
for Uniset 70 presses)<br />
20 Electrical Press Spares, on pallet (suitable<br />
for Uniset 70 presses)<br />
21 Electrical Press Spares, on pallet (suitable<br />
for Uniset 70 presses)<br />
22 Electrical Press Spares, on pallet (suitable<br />
for Uniset 70 presses)<br />
Lot<br />
22A<br />
Description<br />
Baumuller Drive Controller, in box<br />
23 Press Spares, on pallet<br />
24 Press Spares, (suitable for Uniset 75), on<br />
two pallets<br />
25 Two (Mainly Recovered/ Reconditioned)<br />
Sets <strong>of</strong> Eight Damper, Ink Form, Transfer<br />
& Distribu<strong>to</strong>r Rollers, each set with pair<br />
damper rolls, and double sided wood roller<br />
rack (suitable for all three Uniset presses)<br />
26 Two (Mainly Recovered/ Reconditioned)<br />
Sets <strong>of</strong> Eight Damper, Ink Form, Transfer<br />
& Distribu<strong>to</strong>r Rollers, each set with pair<br />
damper rolls, and double sided wood roller<br />
rack (suitable for all three Uniset presses)<br />
27 Two (Mainly Recovered/ Reconditioned)<br />
Sets <strong>of</strong> Eight Damper, Ink Form, Transfer<br />
& Distribu<strong>to</strong>r Rollers, each set with pair<br />
damper rolls, and double sided wood roller<br />
rack (suitable for all three Uniset presses)<br />
28 16 Assorted Rollers (some recovered &<br />
reconditioned), with portable steel double<br />
sided rack<br />
29 16 Assorted Rollers (some recovered &<br />
reconditioned), with double sided wood<br />
roller rack<br />
30 14 Assorted Rollers, (some recovered &<br />
reconditioned), with double sided wood<br />
roller rack<br />
31 Five Reel Paster Foam Rolls<br />
(reconditioned)<br />
32 Two Micro Rollers (both recovered)<br />
33 Three Spreader Rollers<br />
34 Steel Infeed Spreader Roller (unused)<br />
35 Assorted Rollers (require recovering), in<br />
timber crate<br />
36 Two Ink Duct Rollers (one unused & one<br />
refurbished)<br />
37 Two Ink Duct Rollers (one unused & one<br />
requires refurbishment)<br />
38 Two Ink Duct Blades, in timber crate<br />
39 Three Ink Oscillating Rollers (unused)<br />
40 Two Chrome Damper Pan Rollers (one<br />
unused)<br />
41 Eight Unused Ink Rollers, in timber crate<br />
42 Folder Paddle Wheel Assembly – tabloid/<br />
DP (unused), in timber crate (suitable for<br />
Uniset 70 only)<br />
43 Folder Knife Cylinder (unused), in timber<br />
crate<br />
44 Bending Rollers, in timber crate (used)<br />
45 Unused Main Infeed Servo Mo<strong>to</strong>r (Uniset<br />
70) machine no. 0110603, service no. 5143<br />
392K, Drehstron-Servomo<strong>to</strong>r, HS code<br />
8501 52 20<br />
46 Devario CHAIN, on pallet (Unit 29)
Lot<br />
Description<br />
46A Devario CHAIN, on pallet (Unit 29)<br />
46B Devario Chain & Guides, on pallet (Unit 29)<br />
46C<br />
46D<br />
46E<br />
46F<br />
THREE BOXES OF UNISET BLANKETS<br />
(unused)<br />
Uniset Blanket Packings, various gauges,<br />
on pallet<br />
TWO PLATE CYLINDERS (Unused), in<br />
timber crate<br />
TWO PLATE CYLINDERS (Unused), in<br />
timber crate<br />
47 MAN Roland Wartungseinheit Fur<br />
Ro<strong>to</strong>rbalken Portable Turbo Dampener<br />
Washing & Testing Machine, serial no.<br />
5030, (2001)<br />
48 Main Unit Mo<strong>to</strong>r Drive (Uniset 75)<br />
(reconditioned)<br />
49 Roller Topper Former Electric Mo<strong>to</strong>r,<br />
suitable for Uniset<br />
50 Chill Main Drive Mo<strong>to</strong>r (Uniset 75)<br />
51 Two Main Unit Mo<strong>to</strong>rs (Uniset 70)<br />
(reconditioned)<br />
52 Chill Main Drive Mo<strong>to</strong>r<br />
53 Main Drive Mo<strong>to</strong>r (Uniset 70)<br />
(reconditioned)<br />
54 Chill Main Drive Mo<strong>to</strong>r (Uniset 70)<br />
(reconditioned)<br />
55 Reelstand Control Computer Processor<br />
(unused) (Uniset 70), code 11093<br />
56 Roller Topper Former Mo<strong>to</strong>r Drive<br />
(reconditioned) (Uniset 70)<br />
57 Two Folder Infeed Mo<strong>to</strong>r Drives<br />
(unders<strong>to</strong>od <strong>to</strong> be unused)<br />
58 Roller Topper Former Mo<strong>to</strong>r Drive (Uniset<br />
70)<br />
59 Five Webcatcher Mo<strong>to</strong>r Drives (Uniset)<br />
(reconditioned)<br />
60 Two Dryer Fan Mo<strong>to</strong>rs (unused)<br />
61 Three Mo<strong>to</strong>r Fan Cooling Fan Covers<br />
61A<br />
Baumuller Mo<strong>to</strong>r, Drive Control, Cards &<br />
Encoder, on pallet (Uniset 70)<br />
62 Machine Spares for Avanti, Devario,<br />
Exac<strong>to</strong> & Forte, on one pallet<br />
63 Machine Spares for Avanti, Devario,<br />
Exac<strong>to</strong> & Forte, on one pallet<br />
64 Machine Spares for Avanti, on one pallet<br />
with plastic stacking boxes<br />
65 Machine Spares for Avanti, on one pallet<br />
66<br />
67<br />
Lot<br />
67A<br />
67B<br />
Description<br />
UNIT 29 BINDERY<br />
Muller Martini Prima Stitching Line Spares<br />
(in timber crate) please see <strong>download</strong>able<br />
list on our website (unit 21)<br />
Lenze MDFK ABS 100-22 Main Drive Mo<strong>to</strong>r<br />
& Gear Box (unused) (suitable for Zenith<br />
trimmer) (Unit 29)<br />
68 Buhrs POLYMATE EMT POLYTHENE<br />
WRAPPING AND SEALING LINE, serial<br />
no. 4451-109, (1998), with main stack<br />
feeder, six rotary over-feeders, spot gluer<br />
with Nordson PC44R Pattern/Pressure<br />
Control and Series 3500 Hot Melt Kettle,<br />
Sigma 2716 CD Pick & Place Unit,<br />
poly<strong>the</strong>ne roll feed, wrapping & sealing<br />
section, delivery conveyor; Buhrs Rima<br />
Counter Stacker with in-feed conveyor; Belt<br />
Delivery Conveyor 300mm x 2675mm<br />
between centres.<br />
This lot is sold subject <strong>to</strong> an export clause.<br />
This machine is being <strong>of</strong>fered with <strong>the</strong><br />
proviso that it must be exported for use<br />
outside <strong>of</strong> mainland UK and <strong>the</strong> purchaser<br />
will be required <strong>to</strong> sign an undertaking <strong>to</strong><br />
this effect and supply suitable pro<strong>of</strong> <strong>of</strong><br />
shipment (bill <strong>of</strong> lading, etc).We reserve <strong>the</strong><br />
right <strong>to</strong> rescind <strong>the</strong> sale if <strong>the</strong>se conditions<br />
are not complied with.<br />
69 Buhrs Polywrap 2510 POLYTHENE<br />
WRAPPING AND SEALING LINE, serial<br />
no. 36388-01 with main stack feeder, three<br />
rotary over-feeders, poly<strong>the</strong>ne roll feed,<br />
wrapping & sealing section, delivery<br />
conveyor; Buhrs Rima RS10 9inch Counter<br />
Stacker with in-feed conveyor, serial no.<br />
102378-10; Shuttleworth Slip Torque<br />
Systems Live Spindle Stack Feed Conveyor<br />
450mm x 3000mm long; Belt and Band<br />
Stack Feed Conveyor 400mm x 2500mm<br />
between centres.<br />
This lot is sold subject <strong>to</strong> an export clause.<br />
This machine is being <strong>of</strong>fered with <strong>the</strong><br />
proviso that it must be exported for use<br />
outside <strong>of</strong> mainland UK and <strong>the</strong> purchaser<br />
will be required <strong>to</strong> sign an undertaking <strong>to</strong><br />
this effect and supply suitable pro<strong>of</strong> <strong>of</strong><br />
shipment (bill <strong>of</strong> lading, etc).We reserve <strong>the</strong><br />
right <strong>to</strong> rescind <strong>the</strong> sale if <strong>the</strong>se conditions<br />
are not complied with.<br />
70 Wohlenberg MCS-2TV TYPE 92<br />
PROGRAMMATIC GUILLOTINE, serial no.<br />
3460-009; cutting width 920mm<br />
71 MBO B26 FOUR PLATE FOLDER, serial<br />
no. F12/02, order no. S/4741/134 with B26-<br />
C Conveyor Stream Feed; B26-1-26/4<br />
Folder; OMG Multiplo.P.540 Stacker, serial<br />
no. 837, (1989)
Lot<br />
Description<br />
UNIT 21<br />
PRE-PRESS ROOM<br />
72 Creo LOTEM 800 II QUANTUM SQUARE<br />
SPOT CTP, serial no. L82118, (2004) with<br />
MCU Loader III Multiple Cassette Unit,<br />
serial no. L8A228, (2004), Universal Debris<br />
Removal Cabinet, serial no. DC2343,<br />
(2004), Hinged Plate Transfer Conveyor,<br />
Egraf CTP System 120 Processor, Version<br />
NW. CEO, serial no. 4355/04, Au<strong>to</strong> Plate<br />
Stacker, Dell PowerEdge 2600 RIP, UPS<br />
and Transformer. (Lotem One)<br />
73 Creo LOTEM 800 II QUANTUM SQUARE<br />
SPOT CTP, serial no. L82119, (2004) with<br />
MCU Loader III Multiple Cassette Unit,<br />
serial no. L8A229, (2004), Universal Debris<br />
Removal Cabinet, serial no. DC2350,<br />
(2004), Hinged Plate Transfer Conveyor,<br />
Egraf CTP System 120 Processor, Version<br />
NW. CE O, serial no. 4356/04, Au<strong>to</strong> Plate<br />
Stacker, Dell PowerEdge 2600 RIP, UPS<br />
and Transformer. (Lotem Two)<br />
74 Creo LOTEM 800 II QUANTUM SQUARE<br />
SPOT CTP, serial no. L82303, (2005), with<br />
Single Cassette Unit, Universal Debris<br />
Removal Cabinet, serial no. DC2301,<br />
(2005), IGP Thermaline/Egraf CTP System<br />
120 Processor, Version NW.CE.O, serial<br />
no. 4354/04, Hinged Plate Transfer<br />
Conveyor, IGP Au<strong>to</strong> Plate Stacker, Dell<br />
Optiplex 280 RIP, UPS and Transformer.<br />
(Lotem Three)<br />
75 Creo Lotem 800 II Quantum Square Spot<br />
CTP, serial no. L82077, (2004), with Single<br />
Cassette Unit, Universal Debris Removal<br />
Cabinet, serial no. DC2180, (2004), Hinged<br />
Plate Transfer Conveyor, IGP Thermaline/<br />
Egraf System 120 Processor, Version SPO,<br />
serial no. 4357/04, IGP Pro-Stacker De<br />
Luxe 1300 Au<strong>to</strong> Plate Stacker, Dell<br />
PowerEdge 840 RIP, UPS and<br />
Transformer. (Lotem Four)<br />
76 CTP Maintenance Equipment & Spares,<br />
with double door cupboard & rollers against<br />
wall<br />
77 CompAir F26M Air Dryer, with filter and<br />
Modular Controls Guardian 2 Dewpoint<br />
Alarm & Donaldson Ultrapac 2000<br />
Desiccant Dryer, serial no. 1534362/1, size<br />
0080, year <strong>of</strong> manufacture June 2007<br />
(located on o<strong>the</strong>r side <strong>of</strong> wall)<br />
78 Barenschee VSAK 240 Plate Punch,<br />
Bend & Stack Machine, serial no. 85/02,<br />
(2002)<br />
79 Barenschee VSAK 240 PAN Plate Punch,<br />
Bend & Stack Machine, serial no. 33/00,<br />
(2000)<br />
Lot<br />
Description<br />
80 Megtec ES 025 M3 Regenerative Thermal<br />
Oxidiser, order no. 117778, (2004),<br />
exhaust air capacity 25,000 NM3/h,<br />
temperature 870°C, main body 14.15m x<br />
3.4m x 2.6m high, with Pollrich 110 kW<br />
Fan; Stainless Steel Exhaust Stack, approx<br />
1m diameter x 12.5m high; Control Panel<br />
with Siemens Simatic Panel PC Touch<br />
Panel Control; GE Capital Modular Space<br />
Steel Container Housing approx. 3m x 2.4m<br />
x 2.8m overall, serial no. 23612, (2004),<br />
Gas Booster Pumps & Equipment (note<br />
mains supply cable not included – available<br />
privately) & ducting including main straight<br />
lengths in fac<strong>to</strong>ry (hole in wall <strong>to</strong> be made<br />
good by purchaser)<br />
80A Unused Fan Impeller (suitable for lot 80),<br />
with reconditioned shaft drive (unit 29)<br />
80B<br />
Megtec Epsilon S017 M03 Regenerative<br />
Thermal Oxidiser, 20,000NM3/h, 870°C,<br />
installed 2002 with centrifugal fan, electrical<br />
control panel & housing (mains supply cable<br />
not included) -available for viewing in Dorset<br />
(strictly by appointment through Stephen<br />
Jepson +44 (0) 7801 904456)<br />
80C Unused Megtec Fan Impeller (Unit 29)<br />
81 FOUR 11 TONNE CAPACITY WELDED<br />
STEEL SKIRTED BOTTOM BULK INK<br />
TANKS, each approx 1.9m diameter x 3.8m<br />
high with insulated trace heating jacket <strong>to</strong><br />
2850mm, Ingersoll Rand Aro air operated<br />
pump and in-line filter; control panel for four<br />
tanks with indica<strong>to</strong>r lights, capacity gauges<br />
and intake equipment (discharge <strong>to</strong> be<br />
disconnected between filter & valve)<br />
82 Four Hydrair Air Operated Ink Pumping<br />
Units, each with in-line filter (discharge<br />
valve on wall not included), with Hydrair<br />
control panel<br />
REAR YARD (UNIT 21)<br />
83 Delta NEU SEPARATEUR AMSP WASTE<br />
& DUST SEPARATOR HOPPER, with<br />
rotary discharge valve & air operated<br />
diverter <strong>to</strong> two Cogent Packer Hydraulic<br />
Waste Compac<strong>to</strong>rs, serial no’s 1045 & ---,<br />
(refurbished 01/12/99), Extract Fan fitted<br />
two electric mo<strong>to</strong>r drives, Woodcock<br />
Balance Fan fitted 15 kW electric mo<strong>to</strong>r<br />
drive, Steel Cased Dust Collec<strong>to</strong>r Unit<br />
approx. 2200 x 1900 x 3000mm, with two<br />
hopper bot<strong>to</strong>ms & ducting (<strong>to</strong> trim plant)<br />
(hole in wall <strong>to</strong> be made good by purchaser)
Lot<br />
Description<br />
SIDE AREA<br />
84 Pennaire/ Airmaster 75M 18.5kW Steel<br />
Cased Dust Collec<strong>to</strong>r, serial no.<br />
93150080, 11’ 0” wide, with three hopper<br />
bot<strong>to</strong>ms & spiral wound galvanised steel<br />
ducting <strong>to</strong> plant (hole in wall <strong>to</strong> be made<br />
good by purchaser)<br />
85 Steel Cased Dust Collec<strong>to</strong>r, 3’ 8” x 3’ 4” x<br />
9’ 11” overall, with hopper bot<strong>to</strong>m & ducting<br />
<strong>to</strong> plant (hole in wall <strong>to</strong> be made good by<br />
purchaser)<br />
UNIT 29 (REAR YARD)<br />
86 Paramount WASTE EXTRACTION PLANT<br />
(installed circa 2009) comprising Intake<br />
Diverter; Transport Fan with 55kW electric<br />
mo<strong>to</strong>r drive; Main Feed Hopper with rotary<br />
discharger; Diverter Unit; two Hydraulic<br />
Waste Compac<strong>to</strong>rs; Steel Cased Dust<br />
Collec<strong>to</strong>r; Inter Connecting Ducting &<br />
Goyen Pulse Controller 200 (waste skip not<br />
included) (internal ducting available<br />
privately)<br />
87 WASTE EXTRACTION PLANT comprising<br />
Nihot Extract fan with 30kW electric mo<strong>to</strong>r<br />
drive; Air Operated Diverter Unit; Balance<br />
Fan with electric mo<strong>to</strong>r drive, two Nicholls<br />
Engineering Hydraulic Waste Compac<strong>to</strong>rs<br />
with hopper feed & interconnecting<br />
galvanised steel ducting (internal ducting<br />
available privately)<br />
88 POR Ecomec BRICC STANDARD<br />
BRICQUETTING MACHINE, serial no.<br />
CE2946 (2005), with Paramount<br />
RECEIVER FILTER UNIT, 1950mm x<br />
1400mm x approx. 3500mm on straight,<br />
with hopper bot<strong>to</strong>m, JKF Rotary Valve,<br />
serial no. 4984 (2007) & ducting <strong>to</strong> first 90°<br />
bend<br />
89 Pennaire Filtration WASTE EXTRACTION<br />
PLANT, with two Hopper Mounted<br />
Receiver Filter Units, Steel Waste Hopper<br />
approx. 4200mm x 3900mm, with tapered<br />
sides <strong>to</strong> approx. 1000mm x 600mm at base,<br />
with access ladder, platform & steel<br />
supports; Rotary Screw Discharger, Two<br />
Way Discharge Hopper, with air operated<br />
valve; Woodcock & Wilson BLN800/<br />
BFN840 FAN, LGO, D/D Balance Fan,<br />
serial no. 12993-2 01/04, with electric mo<strong>to</strong>r<br />
drive 22/ 25.3kW; Transport Fan with<br />
electric mo<strong>to</strong>r drive; Fan No. 1 with Brook<br />
Cromp<strong>to</strong>n 11kW electric mo<strong>to</strong>r drive;<br />
S<strong>to</strong>ckbridge Airco 380 CRD Fan No. 2<br />
serial no. 2164A/00193-01, with electric<br />
mo<strong>to</strong>r drive & interconnecting galvanised<br />
steel ducting (internal ducting available<br />
privately)<br />
90 Compair L55-7.5A PACKAGE AIR<br />
COMPRESSOR, serial no. 100008042/<br />
0174 (2008), 10.69 m³/ min, 7.5 bar, fitted<br />
Delcos 3100 <strong>to</strong>uch panel control (Unit 29)<br />
Lot<br />
Description<br />
91 Compair L55-10A PACKAGE AIR<br />
COMPRESSOR, serial no. 100008043/<br />
0127 (2007), fitted Delcos 3100 <strong>to</strong>uch panel<br />
control, 9.51 m³/ min, 10 bar (Unit 21)<br />
92 HPC PLUSAIR PACKAGE AIR<br />
COMPRESSOR, 20177 recorded hours<br />
(Unit 29)<br />
93 HPC PLUSAIR CRD 1340 719402219<br />
REFRIGERANT COMPRESSED AIR<br />
DRYER, serial no. 2257710002 (April 2002)<br />
(Unit 29)<br />
94 HPC Inline Air Filter Unit, with fitted<br />
pressure gauge (Unit 29)<br />
95 Hoval Welded Steel Air Receiver, approx.<br />
800mm dia. x 2700mm overall, fitted<br />
Compair Bekomat Oil Discharge Pump<br />
(Unit 29)<br />
96 Compair CS2400 Oil/ Water Separa<strong>to</strong>r<br />
(Unit 29)<br />
97 Abbott Welded Steel Air Receiver, approx.<br />
800mm dia. x 2000mm overall, serial no.<br />
A800-11, date 04/06/82 (Unit 29)<br />
98 Beko Owamat KT05 Oil/ Water Separa<strong>to</strong>r,<br />
serial no. 5/7533 (Unit 29)<br />
99 Ingersoll Rand NIRVANA N55 PACKAGE<br />
AIR COMPRESSOR, serial no. 2750380,<br />
(2005), working pressure 10 bar, with<br />
Ingersoll Rand 38039335 starter control<br />
unit (Unit 29)<br />
100 HPC PLUSAIR 47 PACKAGE AIR<br />
COMPRESSOR, with Kaeser Sigma <strong>to</strong>uch<br />
panel control (Unit 29)<br />
101 CompAir L22-75 PACKAGE AIR<br />
COMPRESSOR, serial 100008032/ 0270<br />
(2006) (Unit 29)<br />
102 AJ Metal Products 700 litre Welded Steel<br />
Air Receiver, ref. 90879 6/00 (Unit 29)<br />
102A<br />
102B<br />
Abbott Welded Steel Air Receiver, serial<br />
no. A800/15 (Unit 29)<br />
Abbott 500 litre Welded Steel Air Receiver<br />
(Unit 29)<br />
REAR COMPRESSOR HOUSE (Unit 21)<br />
(note Compressor Housing available<br />
privately)<br />
103 Ingersoll Rand Nirvana N45 Package Air<br />
Compressor, serial no. 2730276, (2003),<br />
working pressure 10 bar with Intellisys<br />
<strong>to</strong>uch panel control (known <strong>to</strong> require<br />
attention) (Unit 21)<br />
104 Ecoair D40 Package Air Compressor,<br />
serial no. 1065468 (1999), working pressure<br />
10 bar, with 34746 recorded hours (Unit 21)<br />
105 Ecoair D40 Package Air Compressor,<br />
serial no. 1065428 (1999), working pressure<br />
10 bar, with 34248 recorded hours (Unit 21)
Lot<br />
Description<br />
106 Ingersoll Rand/ MCIB Malle TMS150<br />
Compressed Air Dryer, serial no. TMS150-<br />
0307/ 1386, date <strong>of</strong> manufacture 08/07/03<br />
(Unit 21)<br />
107 Hoval Welded Steel Air Receiver, approx.<br />
1250mm dia. x 2300mm overall (Unit 21)<br />
107A<br />
UNIT 21<br />
Abbott 500 litre Vertical Welded Steel Air<br />
Receiver (Unit 21 – near Lot 1 press control<br />
room)<br />
108 Lansing Linde H40T – 03 4000kg cap.<br />
LPG COUNTERBALANCE FORK LIFT<br />
TRUCK, serial no. H2X352K02131, (1999),<br />
with triplex mast <strong>to</strong> 6925mm lift height,<br />
piped for reel clamp, (reserve removal <strong>to</strong> 12<br />
noon 14 December 2011) (Unit 21)<br />
109 Linde H35D 3500kg cap. DIESEL<br />
COUNTERBALANCE FORK LIFT TRUCK,<br />
serial no. H2X393S01296, (2005), 02997<br />
hours (at time <strong>of</strong> listing), with duplex mast<br />
2.65m high <strong>to</strong> approx 5m lift height, 1.2m<br />
forks, solid tyres, piped for reel clamp (reel<br />
clamp not included) with one pair <strong>of</strong> forks,<br />
each approx. 1.13 long (Unit 21)<br />
110 Meyer Hydraulic Fork Lift Truck Reel Clamp<br />
(known <strong>to</strong> require attention) (Unit 21)<br />
110A<br />
110B<br />
Hydraulic Fork Lift Truck Reel Clamp (Unit<br />
29)<br />
Wright 1000kg Fork Lift Truck Extending<br />
Lifting Jib<br />
111 One Pair <strong>of</strong> Fork Extensions, each 2m long<br />
(Unit 21)<br />
112 Empteezy Fork Lift Truck Tip Skip (Unit 21)<br />
112A Empteezy Fork Lift Truck Tip Skip (Unit 29)<br />
UNIT 29<br />
113 Pakseal CAROUSEL 3 ROTARY PALLET<br />
STRETCH WRAPPING MACHINE, serial<br />
no. P0297843, with 1800mm dia. turntable<br />
(Unit 29)<br />
114 Signode LB-Magazine Portable<br />
Au<strong>to</strong>matic Tape Strapping Machine (Unit<br />
29)<br />
115 Mosca RO-M-P5 Portable Tape Strapping<br />
Machine, serial no. 88189 (2007) (Unit 29)<br />
116 Mosca RO-M-P4 Portable Tape Strapping<br />
Machine, serial no. 74417 (2004) (Unit 29)<br />
117 Mosca RO-M-P4 Portable Tape Strapping<br />
Machine, serial no. 74415 (Unit 29)<br />
118 Pakseal EX311 Portable Tape Strapping<br />
Machine, serial no. 10773 (Unit 29)<br />
119 Pakseal EX311 Portable Tape Strapping<br />
Machine, serial no. 10770 (Unit 29)<br />
120 Pakseal SX 510 Portable Tape Strapping<br />
Machine, serial no. 21595 (Unit 29)<br />
121 Pakseal M30 Portable Tape Strapping<br />
Machine, serial no. 2199 (Unit 29)<br />
Lot<br />
Description<br />
122 Payne RO-M-P2 Portable Tape Strapping<br />
Machine, serial no. 53440 (Unit 29)<br />
123 Payne RO-M-P2 Portable Tape Strapping<br />
Machine, serial no. 46088 (Unit 29)<br />
124 Payne RO-M-P2 Portable Tape Strapping<br />
Machine, serial no. 46011 (Unit 29)<br />
125 Strap Banding Reel & Tools (Unit 29)<br />
126 Linde L12 Pedestrian Controlled 1200kg<br />
cap. Electric Fork Lift Truck, serial no.<br />
X379-R 01215/ 2004, with double mast <strong>to</strong><br />
4224mm (no charger – see lot 128) (Unit<br />
29)<br />
127 BT LWE180 1800kg cap. Pedestrian<br />
Controlled Electric Pallet Truck, serial no.<br />
6000776 (2007) (no charger – see lot 128)<br />
(Unit 29)<br />
128 Hawker VCBEU24VOJOE/8 Motive Power<br />
Charger, serial no. A20070600170, 24V,<br />
50A (Unit 29)<br />
129 Atlet Piccolo PLL/ 200 2000kg cap.<br />
Pedestrian Controlled Electric Reel<br />
Handling Truck, serial no. PLL35296/01<br />
(2005) (Unit 29)<br />
130 Atlet Piccolo PLL/ 200 2000kg cap.<br />
Pedestrian Controlled Electric Reel<br />
Handling Truck, serial no. PLL35295/01<br />
(2005) (Unit 29)<br />
131 Atlet Piccolo PLL/ 200 2000kg cap.<br />
Pedestrian Controlled Electric Reel<br />
Handling Truck, serial no. PLL35293/ 01<br />
(2005) (Unit 29)<br />
132 Atlet Piccolo PLL/ 200 2000kg cap.<br />
Pedestrian Controlled Electric Reel<br />
Handling Truck, serial no. PLL355292/ 01<br />
(2005) (Unit 29)<br />
133 Atlet Piccolo PLL/ 200 2000kg cap.<br />
Pedestrian Controlled Electric Reel<br />
Handling Truck, serial no. PLL35291/ 01<br />
(2005) (no charger) (Unit 29)<br />
134 Linde L14AS 1400kg cap. Pedestrian<br />
Controlled Electric Fork Lift Truck, serial<br />
no. W4X372 P03387/ 2003, with double<br />
mast <strong>to</strong> 1964mm & reel spike (no charger)<br />
(Unit 29)<br />
135 BT LW13 1300kg cap. Pedestrian<br />
Controlled Electric Reel Handling Truck,<br />
serial no. 416082AA/ 2001 (no charger)<br />
(Unit 29)<br />
136 Wilmat Palletmover 1000kg cap.<br />
Pedestrian Controlled Reel Lifting<br />
Electric Truck, with 800mm lift height,<br />
serial no. 20223 (2002) (Unit 29)<br />
137 BT Rolatruc Hand Hydraulic Reel Truck<br />
(Unit 29)<br />
138 BT Lifters Rolatruc Hand Hydraulic Reel<br />
Truck (Unit 29)
Lot<br />
Description<br />
139 Linde M25 HLE 1000kg cap. BATTERY<br />
ELECTRIC HIGH LIFT PALLET TRUCK,<br />
serial no. 1070048, with 800mm lift height<br />
(Unit 29)<br />
140 BT HL10/3 1000kg cap. High Lift Hand<br />
Hydraulic Pallet Truck, serial no. 477607<br />
(Unit 29)<br />
141 BT HL10/3 1000kg cap. High Lift Hand<br />
Hydraulic Pallet Truck, serial no. 477605<br />
(Unit 29)<br />
142 BT Rolatruc Hand Hydraulic Pallet Truck<br />
143 Wario Hand Hydraulic Pallet Truck<br />
144 BT Rolatruc Hand Hydraulic Pallet Truck<br />
145 Wright FMBSB4 Fork Lift Truck Chain<br />
Lifting Jib 2000kg cap (Unit 29)<br />
146 Clarke Strong Arm HDC100 Portable<br />
Hydraulic Workshop Crane, PT no.<br />
7612260, (2000) (Unit 29)<br />
147 Fimap 85 Electric Floor Cleaning<br />
Machine, (1996), with Oldham 36u20<br />
Series 1000 battery charger (Unit 29)<br />
148 Kemper Filter Master 64120 1200 m³/h<br />
Portable Dust & Fume Extrac<strong>to</strong>r Unit,<br />
serial no. 196169 (07/2007) (Unit 29)<br />
149 Numatic Portable Bin Type Vacuum<br />
Cleaner, serial no. 993501111 (Unit 29)<br />
150 Mohr GWL2A 840mm x 615mm Paper<br />
Jogging Machine, serial no. 5571042 (Unit<br />
29)<br />
151 Mec Brown 75 Pedestal Mitre Cut-<strong>of</strong>f<br />
Saw (Unit 29)<br />
152 Harrison Vertical Milling Machine, serial<br />
no. 150250, with table 775mm x 205mm<br />
overall (Unit 29)<br />
153 Numatic Vacuum Cleaner (Unit 29)<br />
154 Two Section Single Sided Six Tier S<strong>to</strong>ck<br />
Rack (Unit 29)<br />
155 Portable 565mm wide Expanding Roller<br />
Conveyor (Unit 29)<br />
156 Lonveyor 500mm wide Powered Radius<br />
Conveyor (Unit 29)<br />
157 Brehmer-Leipzig Pamphlet Wire<br />
Stitching Machine (Unit 29)<br />
158 UK Exchangers S8A-IT 27 Plate Heat<br />
Exchanger, serial no. C-62751 (2007) (Unit<br />
29)<br />
159 Reznor UDSA 085-2, 85.10kW High Heat<br />
Output Gas Fired Air Heater, serial no.<br />
081600352 (Unit 29)<br />
160 Reznor UDSA 085-2, 85.10kW High Heat<br />
Output Gas Fired Air Heater, serial no.<br />
081600353 (Unit 29)<br />
161 Reznor UDSA 064-2, 64.40kW High Heat<br />
Output Gas Fired Air Heater, serial no.<br />
081600347 (Unit 29)<br />
Lot<br />
Description<br />
162 Reznor UDSA 064-2, 64.40kW High Heat<br />
Output Gas Fired Air Heater, serial no.<br />
081600346 (Unit 29)<br />
163 Avery Weigh-Tronix 3000kg cap.<br />
Electronic Weigh System Controller, with<br />
weigh platform 1250mm x 1250mm & two<br />
weigh beams (Unit 29)<br />
164 New<strong>to</strong>n NT-200S 1200kg cap. Electronic<br />
Weigh System Controller, with weigh<br />
platform 1250mm x 1250mm (Unit 29)<br />
165 Two Panel Portable Electric Radiant Heater,<br />
2800W, 230V (Unit 29)<br />
166 Two Panel Portable Electric Radiant Heater,<br />
2800W, 230V (Unit 29)<br />
167 Two Panel Portable Electric Radiant Heater,<br />
3kW, 230V (unders<strong>to</strong>od <strong>to</strong> require attention)<br />
(Unit 29)<br />
168 Two Panel Electric Radiant Heater, 3kW,<br />
230V (unders<strong>to</strong>od <strong>to</strong> require attention) (Unit<br />
29)<br />
169 Overhead Crane System comprising Two<br />
Rails, each 4.70m long; & 250kg capacity<br />
Cross Travelling Rail, 4.00m long (Unit 29)<br />
170 GIS Twin Chain Electric Hoist Unit (Unit<br />
29)<br />
170A<br />
GIS Twin Chain Electric Hoist Unit (Unit<br />
29)<br />
171 Chloride Aquajet III Battery Water<br />
Service Trolley (Unit 29)<br />
172 High Bay Lighting Reflec<strong>to</strong>rs & Presslite<br />
Glass Covers, on pallet (Unit 29)<br />
173 Gear Oil & Lubricant, on pallet (Unit 29)<br />
174 Pallet Rack comprising five Upright Frames,<br />
900mm x approx. 5200mm; 25 Beams<br />
2700mm long; & eight MDF shelves,<br />
2700mm x 900mm (Unit 29)<br />
175 Electric Power Cabling, as set out on three<br />
pallets (Unit 29)<br />
176 Stacking Parts Bins, on pallet (Unit 29)<br />
177 Dismantled Racking, on pallet (Unit 29)<br />
178 Dismantled Racking, on pallet, with<br />
chipboard shelves (Unit 29)<br />
179 Dismantled Racking, on pallet, with<br />
chipboard shelves (Unit 29)<br />
180 Dismantled Racking, on pallet, with<br />
chipboard shelves (Unit 29)<br />
181 Reznor Ambirad Heaters, in four sections<br />
(Unit 29)<br />
182 Drum Pump, with empty drum & stillage<br />
(Unit 29)<br />
183 BT HR10/3 1000kg High Lift Hand<br />
Hydraulic Pallet Truck, serial no. 479115<br />
(Unit 29)<br />
184 Nu-Tool Bench Drill (Unit 29)
Lot<br />
Description<br />
185 6in dia. Double Ended Bench Grinder (Unit<br />
29)<br />
186 Steel Bench (Unit 29)<br />
187 Three Louvered Wall Racks & Contents<br />
(Unit 29)<br />
188 Vacuum Cleaner (Unit 29)<br />
189 Steel-framed Bench & Contents (Unit 29)<br />
190 Youngman Folding Alloy Stepladder (Unit<br />
29)<br />
191 Timber Bench Fitted Engineers Bench Vice<br />
(Unit 29)<br />
192 Double Door Cupboard (Unit 29)<br />
193 Timber Bench (Unit 29)<br />
194 Multi-compartment Timber Rack & Contents<br />
(Unit 29)<br />
195 Muller Martini STACKER (Unit 29)<br />
196 MBO Z2 Conveyor (Unit 29)<br />
197 MBO ZFW Conveyor (Unit 29)<br />
198 Timber Bench (Unit 29)<br />
198A Conveyor Shrink Tunnel (unit 29)<br />
198B<br />
198C<br />
Burnley Packaging SW650A Poly<strong>the</strong>ne<br />
Wrapping & Sealing Machine, serial no.<br />
2574 (unit 29)<br />
Pakseal Model 4000 Stack Turn Unit, serial<br />
no. 4566/8 (unit 29)<br />
199 Office Furniture, as set out, including five<br />
desks & eight filing cabinets (Unit 29)<br />
200 Four Four-Tier Timber Racks (Unit 29)<br />
201 Five Multi-Tier Timber Racks (Unit 29)<br />
202 Multi Timber Rack & Wood Bench (Unit 29)<br />
203 Two x Two-Tier Racks (Unit 29)<br />
204 Steel Double Door Cupboard (Unit 29)<br />
205 Allen Bradley Control Panel, with digital DC<br />
drive (Unit 29)<br />
206 Compac<strong>to</strong>r Control Panel (Unit 29)<br />
207 Six Door Timber Cabinet (Unit 29)<br />
208 Timber Cabinet, Racks & Bench (Unit 29)<br />
209 Two Roller Top Tables (Unit 29)<br />
210 Alloy Extension Ladder (Unit 29)<br />
211 Steel Bench & Drum Bund (Unit 29<br />
Consumables S<strong>to</strong>res)<br />
212 Timber Pallets (Unit 29)<br />
213 Two Timber Benches & Cupboard (Unit 29)<br />
214 Double Door Timber Cupboard (Unit 29)<br />
215 18 Plastic Wheely Bins (Unit 29)<br />
216 Nilfisk Al<strong>to</strong> Vacuum Cleaner (Unit 29)<br />
217 Two Tool Boards, Double Door Cupboard &<br />
Three Mobile Bins (Unit 29)<br />
218 Racks, Writing Slope & Spill Kit Container<br />
(Unit 29)<br />
Lot<br />
Description<br />
219 Two Timber Benches (Unit 29)<br />
220 Six Mobile Plastic Bins (Unit 29)<br />
221 Five Mobile Plastic Bins (Unit 29)<br />
222 Two Multi Compartment Racks (Unit 29)<br />
223 Six Double Door Wood Cupboards (Unit 29)<br />
224 Two Timber Benches (Unit 29)<br />
225 Steel Double Door Cupboard (Unit 29)<br />
226 Louvered Steel Panels & Boxes (Unit 29)<br />
227 Timber Bench (Unit 29)<br />
228 Plant Pedestrian Bridge, 700mm high x<br />
1040mm in aperture (Unit 29)<br />
229 Seven Assorted Electric Mo<strong>to</strong>rs, up <strong>to</strong><br />
30kW (Unit 29)<br />
230 Multistage Pump (Unit 29)<br />
231 Unused Ebara MD32-160/ 2.2 Centrifugal<br />
Pump (Unit 29)<br />
232 Comptec Vacuum Pump (Unit 29)<br />
233 Rietsche CLFD141 Vacuum Pump, with<br />
electric mo<strong>to</strong>r (Unit 29)<br />
234 Four Royse Alcoholmiser Dampener Mixing<br />
Units (Unit 29)<br />
235 Siemens 22kW Electric Mo<strong>to</strong>r, 1500rpm<br />
(Unit 29)<br />
236 G12 Main Drive Shaft (unders<strong>to</strong>od <strong>to</strong> be<br />
refurbished) (Unit 29)<br />
237 Electric Mo<strong>to</strong>rs, on pallet (Unit 29)<br />
238 Electric Mo<strong>to</strong>rs, on pallet including ABB<br />
MZBA 200 MLC 2/4 IEC 200 M/L 55 37kW<br />
electric mo<strong>to</strong>r 2950rpm (Unit 29)<br />
239 Allen Bradley PLC243 Spares, on pallet<br />
(Unit 29)<br />
240 PLC Racks & Equipment, on pallet (Unit 29)<br />
241 Quad Tech Register Equipment, on pallet<br />
(Unit 29)<br />
242 Assorted Spares & Equipment, on pallet<br />
(Unit 29)<br />
243 Distribution Boards & Isola<strong>to</strong>rs, on pallet<br />
(Unit 29)<br />
244 Pneumatic Oil Pump & Equipment, on pallet<br />
(Unit 29)<br />
245 Rubber Matting & Electrical Insulation Mat,<br />
on pallet (Unit 29)<br />
246 Mainly Hose, on pallet (Unit 29)<br />
247 Mainly Drive Belts, on pallet (Unit 29)<br />
248 Mainly Drive Belts, on pallet (Unit 29)<br />
249 Blankets & Packings, on pallet (Unit 29)<br />
250 Blankets, on pallet (Unit 29)<br />
251 Machine Spares, on pallet (Unit 29)<br />
252 Machine Spares, on pallet (Unit 29)<br />
253 Machine Spares, on pallet (Unit 29)
Lot<br />
Description<br />
254 Machine Spares, on pallet (Unit 29)<br />
255 Flexible Ducting Hose, on pallet (Unit 29)<br />
256 Two Cold Water Tanks & Electrical<br />
Equipment (Unit 29)<br />
257 Demag 250kg Lifting Beam, with two hoists<br />
(Unit 29)<br />
258 Tank, Pump & Equipment, on pallet (Unit<br />
29)<br />
259 Unused Fluorescent Tubes & S<strong>to</strong>rage<br />
Chest (Unit 29)<br />
260 Machine Spares, on pallet (Unit 29)<br />
261 Mainly Piping, on pallet (Unit 29 yard)<br />
262 Steel-framed Wire Mesh Fencing (Unit 29)<br />
263 Randalls 1200 ELECTRO-HYDRAULIC<br />
WASTE COMPACTOR, serial no 86100/3,<br />
with loading platform & safety barriers (skip<br />
not included) (<strong>of</strong>fered by kind permission on<br />
behalf <strong>of</strong> ano<strong>the</strong>r vendor) (unit 29)<br />
264<br />
265<br />
266<br />
267<br />
268<br />
269<br />
270<br />
UNIT 21 (Rear Yard)<br />
271 Slingsby Bottle Cage (bottles not included)<br />
(Unit 21/ rear yard)<br />
272 Welded Steel Drum Bund, 3350mm x<br />
660mm (Unit 21/ rear yard)<br />
273 Drum Pump (Unit 21/ rear yard)<br />
274 Protec<strong>to</strong>seal Fluid Dispenser (Unit 21/ rear<br />
yard)<br />
275 Timber Pallets, as set out (Unit 21/ rear<br />
yard)<br />
276 20ft Steel Cargo Container, with contents<br />
including mainly paints (Unit 21/ rear yard)<br />
277 Four Roll Pallet Cages (Unit 21/ rear yard)<br />
278 Grit Bin & Contents <strong>of</strong> Grit (Unit 21/ rear<br />
yard)<br />
Lot<br />
Description<br />
PRIVATE & COMMERCIAL VEHICLES<br />
279 Mercedes ATEGO 1318 TWIN AXLE<br />
RIGID BODY CURTAINSIDER, registration<br />
no. DK53 DAO, date first registered<br />
11/02/04, indicated km 047,710km at time<br />
<strong>of</strong> listing, 13,500kg GVW, with PPS<br />
Stronghold 6.9m curtain sided box & rear<br />
barn doors<br />
279A<br />
279B<br />
279C<br />
Citroen RELAY 1800 2.2TD HDI LWB<br />
PANEL VAN, registration no CA54 VLJ,<br />
date first registered 05/01/05, tested <strong>to</strong><br />
04/07/12, tax <strong>to</strong> 06/12 (<strong>of</strong>fered by kind<br />
permission on behalf <strong>of</strong> ano<strong>the</strong>r vendor)<br />
(please note this lot is available for viewing<br />
and collection from Ashfield, Vista Road,<br />
New<strong>to</strong>n-le-Willows, WA12 0HD)<br />
Citroen RELAY 1800 2.2TD HDI LWB<br />
PANEL VAN, registration no CF04 LJK,<br />
date first registered 20/07/04, tested <strong>to</strong><br />
28/06/12, tax <strong>to</strong> 06/12 (<strong>of</strong>fered by kind<br />
permission on behalf <strong>of</strong> ano<strong>the</strong>r vendor)<br />
(please note this lot is available for viewing<br />
and collection from Ashfield, Vista Road,<br />
New<strong>to</strong>n-le-Willows, WA12 0HD)<br />
Fiat SCUDO EL 1.9D VAN, registration no<br />
WR53 PJY, date first registered 30/10/03,<br />
tested <strong>to</strong> 25/04/12 (<strong>of</strong>fered by kind<br />
permission on behalf <strong>of</strong> ano<strong>the</strong>r vendor)<br />
(please note this lot is available for viewing<br />
and collection from Ashfield, Vista Road,<br />
New<strong>to</strong>n-le-Willows, WA12 0HD)<br />
279D FORD MONDEO ZETEC 2.0 PETROL 5<br />
DOOR HATCHBACK CAR, registration no<br />
PJ06 HCC, date first registered 11/05/06,<br />
tested <strong>to</strong> 11/05/12 (<strong>of</strong>fered by kind<br />
permission on behalf <strong>of</strong> ano<strong>the</strong>r vendor)<br />
(please note this lot is available for viewing<br />
and collection from Ashfield, Vista Road,<br />
New<strong>to</strong>n-le-Willows, WA12 0HD)<br />
279E FORD FOCUS ZETEC CLIMATE 1.6<br />
PETROL 5 DOOR HATCHBACK CAR,<br />
registration no ND56 VJV, date first<br />
registered 16/11/06, tested <strong>to</strong> 16/11/11<br />
(<strong>of</strong>fered by kind permission on behalf <strong>of</strong><br />
ano<strong>the</strong>r vendor) (please note this lot is<br />
available for viewing and collection from<br />
Ashfield, Vista Road, New<strong>to</strong>n-le-Willows,<br />
WA12 0HD)<br />
REAR STORAGE BAY<br />
280 Two Guillotines & Bench (Unit 21)<br />
281 Drum Truck (Unit 21)<br />
282 Six Mobile Plastic Bins (Unit 21)<br />
283 Six Mobile Plastic Bins (Unit 21)<br />
284<br />
285 BT HHM100 1000kg High Lift Hand<br />
Hydraulic Pallet Truck (Unit 21)<br />
286 BT HL10/3 1000kg High Lift Hand Hydraulic<br />
Pallet Truck (Unit 21)<br />
287 BT Rolatruc Hand Hydraulic Pallet Truck<br />
(Unit 21)
Lot<br />
Description<br />
288 BT Rolatruc Hand Hydraulic Pallet Truck<br />
(Unit 21)<br />
289 BT Rolatruc Hand Hydraulic Pallet Truck<br />
(Unit 21)<br />
290 BT Rolatruc Hand Hydraulic Pallet Truck<br />
(Unit 21)<br />
291 BT Rolatruc Hand Hydraulic Pallet Truck<br />
(Unit 21)<br />
292 BT Rolatruc Hand Hydraulic Pallet Truck<br />
(Unit 21)<br />
293 Portable Industrial Vacuum Cleaner, 240V<br />
(Unit 21)<br />
294 Timber Bench & Vice (Unit 21)<br />
295 Strap Banding Trolley & Equipment (Unit<br />
21)<br />
296 Louvered Steel Wall Panels (on pallet),<br />
with plastic stacking boxes on three<br />
pallets (Unit 21)<br />
297 Three Tier Steel Trolley (Unit 21)<br />
298 Three Rise Steps (Unit 21)<br />
299 Folding Alloy Stepladder (Unit 21)<br />
300 Case Truck (Unit 21)<br />
301 Case Truck (Unit 21)<br />
302 Three Rise Steps (Unit 21)<br />
303 Five Rise Steps (Unit 21)<br />
304 Folding Alloy Stepladder (Unit 21)<br />
305 Folding Allow Stepladder (Unit 21)<br />
306 Slingsby Five Rise Steps (Unit 21)<br />
307 Folding Alloy Stepladder (Unit 21)<br />
308 Two Coral EP2B & One Comet EP2B Plate<br />
Punching Units (Unit 21)<br />
309 Numatic Henry Vacuum Cleaner (Unit 21)<br />
310 Electric Mo<strong>to</strong>rs, on pallet (Unit 21)<br />
311 Secomak Gas Booster, with base plate (no<br />
electric mo<strong>to</strong>r) (Unit 21)<br />
312 Convacor SA350/2 Blower Unit, with<br />
electric mo<strong>to</strong>r (Unit 21)<br />
313 Three Assorted Pumps (Unit 21)<br />
314 Two Heat Exchangers (suitable for chilled<br />
water units) (Unit 21)<br />
315 Horizontal Receiver Mounted Pressure<br />
Pump (Unit 21)<br />
316 Grundfos CR15-03 A-F-A-HQQE<br />
Mulitstage Pump (unused) (unit 21)<br />
317 CMP 2100 24525 Traction Battery<br />
Charger (Unit 21)<br />
318 Two Oil Re-circulating Pumps (one unused)<br />
(Unit 21)<br />
319 G12 Drive Shaft, in timber crate (Unit 21)<br />
320 Stand Pipe & Plumbing Spares (Unit 21)<br />
Lot<br />
Description<br />
321 Assorted Equipment & Spares, on pallets<br />
(Unit 21)<br />
322 Assorted Rolls (Unit 21)<br />
323 Cable, on pallet (Unit 21)<br />
324 Assorted Equipment & Spares, on pallet<br />
(Unit 21)<br />
325 Dust Sleeves, on pallet (Unit 21)<br />
326 Mainly Drive Belts, in plastic crate (Unit 21)<br />
327 Electrically Heated Tank Jackets, on pallet<br />
(Unit 21)<br />
328 Assorted Electrical Equipment & Spares<br />
(Unit 21)<br />
329 Assorted Equipment & Spares, on pallet<br />
(Unit 21)<br />
330 Waste Bines, as set out (Unit 21)<br />
331 Assorted Spares & Equipment, on three<br />
pallets (Unit 21)<br />
332 Fluorescent Light Fittings & Tubes, on two<br />
pallets (Unit 21)<br />
333 High Bay Lamps, on pallet (Unit 21)<br />
334 Porta-Gantry 2000kg SWL PORTABLE<br />
GANTRY (Unit 21)<br />
335 Strap Banding Trolley & Equipment (Unit<br />
21)<br />
336 Challenge 001 Straight Line Marking<br />
Trolley (Unit 21)<br />
337 Two Bag Portable Dust Collection Unit (Unit<br />
21)<br />
338 Assorted Spares, on pallet (Unit 21)<br />
339 Assorted Spares & Equipment, on pallet<br />
(Unit 21)<br />
340 Assorted Spares & Equipment, on pallet<br />
(Unit 21)<br />
341 Assorted Spares & Equipment, on pallet<br />
(Unit 21)<br />
342 Binding Spares & Equipment, on pallet (Unit<br />
21)<br />
343 Link Chain, on pallet (Unit 21)<br />
344 Air Conditioning Unit (Unit 21)<br />
345 Two Pedestal Fans (Unit 21)<br />
346 Numatic WVD572 Vacuum Cleaner (Unit<br />
21)<br />
347 TWO SECTION BOARDROOM TABLE,<br />
3.2m x 1.4m, with 12 black fabric<br />
upholstered cantilever stand chairs (Unit<br />
21)<br />
348 Two Cantilever Framed Desks (Unit 21)<br />
349 Two Section Circular Meeting Table (Unit<br />
21)<br />
350 Three x Three Drawer Steel Filing Cabinets<br />
(Unit 21)<br />
351 Three x Three Drawer Steel Filing Cabinets<br />
(Unit 21)
Lot<br />
Description<br />
352 Bisley Five Drawer Steel Filing Cabinet<br />
(Unit 21)<br />
353 Three x Four Drawer Steel Filing Cabinets<br />
(unit 21)<br />
354 Three x Three Drawer Steel Filing Cabinets<br />
(Unit 21)<br />
355 Four Drawer Veneered Wood Filing Cabinet<br />
(Unit 21)<br />
356 Two Tambour Door Front S<strong>to</strong>rage Unit (Unit<br />
21)<br />
357 Four Time Precision T/D Printers (Unit 21)<br />
358 One Pair Loadcell Weighing Beams, with<br />
Salter 8251 digital read out (Unit 21)<br />
359 Six Sheets Commercial Vehicle Deck<br />
Flooring, 1220mm x 2440mm (Unit 21)<br />
360 MDF Sheets, with copper pipe & insulation<br />
(Unit 21)<br />
361 Nilfisk Al<strong>to</strong> Vacuum Cleaner (Unit 21)<br />
362 Spare Parts & Equipment, on pallet (Unit<br />
21)<br />
363 Hand Wash Solutions, on pallet (Unit 21)<br />
364 Two Framed Pictures (Unit 21)<br />
365 Plastic Stacking Boxes (Unit 21)<br />
366 Pneumatic Grease Pump (Unit 21)<br />
367 Redundant IT Equipment, in roller pallet<br />
cage (Unit 21)<br />
368 Redundant IT Equipment & Cables, in IBC<br />
(Unit 21)<br />
369 Printers & Faxes, on pallet (Unit 21)<br />
370 Timber Bench & Contents (Unit 21)<br />
371 Writing Slope & Cupboard (Unit 21)<br />
372 Steel Double Door Cupboard (Unit 21)<br />
373 Steel Double Door Cupboard & Wood<br />
Cupboards (Unit 21)<br />
374 Five Plate Racks (Unit 21)<br />
375 Balmoral Bolted Section Panel Water<br />
Tank, 1.5m x 1m x 2m high (Unit 21)<br />
376 Grundfos Pressure Pump & Receiver (Unit<br />
21)<br />
377 Grundfos Pressure Pump & Receiver (Unit<br />
21)<br />
378 Three Seat Folding Bench (Unit 21)<br />
379 Three Seat Folding Bench (Unit 21)<br />
380 Double Door Cupboard & Two Multi<br />
Compartment Racks (Unit 21)<br />
381 Double Door Cupboard, Two Multi<br />
Compartment Racks & Bench (Unit 21)<br />
382 FIVE ALLOY FRAMED WALK BOARDS,<br />
each 4760mm long (Unit 21)<br />
383 Double Door Cupboard & Contents (Unit<br />
21)<br />
Lot<br />
Description<br />
384 Wood Bench & Two Multi Compartment<br />
Wood Racks (Unit 21)<br />
385 Double Door Cupboard & Contents (Unit<br />
21)<br />
386 Three x Eight Compartment Wood Racks<br />
(Unit 21)<br />
387 Two Soiled Cloth Bins (Unit 21)<br />
FITTERS SHOP<br />
388 Clarke STRONGARM AHP50<br />
ADJUSTABLE DAYLIGHT DOUBLE<br />
COLUMN HAND OPERATED HYDRAULIC<br />
PRESS, serial no. P25854T/02L, 2002 (Unit<br />
21)<br />
389 Adcock Shipley BRIDGEPORT TURRET<br />
HEAD MILLING MACHINE, serial no.<br />
258480877U, fitted two axis digital read out<br />
(Unit 21)<br />
390 Colchester MASCOT 1600 CENTRE<br />
LATHE, serial no. 7/0004/05591, fitted<br />
three jaw chuck & three way <strong>to</strong>ol post (Unit<br />
21)<br />
391 Ferm FTC2 2 Ton Hand Hydraulic<br />
Folding Workshop Crane, serial no.<br />
104167/2000 (Unit 21)<br />
392 Warco K-1605BVC Variable Speed Bench<br />
Drilling Machine, serial no. 003158, with<br />
bench (Unit 21)<br />
393 Eland Mig 320 Arc Welding Rectifier,<br />
serial no. 01/225 (Unit 21)<br />
394 Steel Bench, with vice & pipe vice<br />
395 Welding Screen (Unit 21)<br />
396 Two Tripod Light Stands & Heater (Unit 21)<br />
397 Refrigera<strong>to</strong>r & Microwave, with kettle &<br />
<strong>to</strong>aster<br />
398 Double Sided Steel Bench, fitted under<br />
cupboard & contents (Unit 21)<br />
399 Hand Tools & Equipment, as set out (Unit<br />
21)<br />
400 Three Double Door Cupboards, with<br />
contents including fixings sets, hand <strong>to</strong>ols &<br />
equipment (Unit 21)<br />
401 PPE, as set out (Unit 21)<br />
402 Machine Spares & Equipment, as set out on<br />
bench (Unit 21)<br />
403 Surface Plate, 30in x 20in (Unit 21)<br />
404 Steel Bench, fitted under cupboards (Unit<br />
21)<br />
405 Wilo Multi Stage Pump (Unit 21)<br />
406 Clarke STRONG-ARM 10 <strong>to</strong>n<br />
HYDRAULIC BODY REPAIR KIT (Unit 21)<br />
407 Clarke STRONG-ARM 4 <strong>to</strong>n HYDRAULIC<br />
BODY REPAIR KIT (Unit 21)<br />
408 Atlas BS200 Industrial Bench Shear (Unit<br />
21)
Lot<br />
Description<br />
409 Timber Bench, fitted Record 36 engineers<br />
bench vice (Unit 21)<br />
410 Maplin XM19 Regulated DC Power Supply,<br />
13.8V (Unit 21)<br />
411 Kytronic 426DLX Fume Extrac<strong>to</strong>r (Unit 21)<br />
412 Monarch Palm Strobe Pocket Size<br />
Portable Stroboscope (Unit 21)<br />
413 Plastic Drawers & Contents (Unit 21)<br />
414 Platform Trolley (Unit 21)<br />
415 Unilab 032.601 Oscilloscope (Unit 21)<br />
416 Comvac 3000-C Portable Vacuum Cleaner<br />
(Unit 21)<br />
417 Steel Bench & Contents (Unit 21)<br />
417A Strapex Cat Portable Electric Tool (Unit 21)<br />
417B<br />
417C<br />
417D<br />
Habasit A-60 Skive Preparing Device<br />
(Skiving Tool) (Unit 21)<br />
Floor Matting Throughout Fitters Shop<br />
(reserve removal till contents cleared) (Unit<br />
21)<br />
Schmidt Proceq Concrete Test Hammer<br />
(Unit 21)<br />
OFFICES<br />
RECEPTION<br />
418 Powell ALBION HAND PATTERN<br />
PRINTING PRESS, serial no. 2609, year <strong>of</strong><br />
manufacture 1870 (Unit 21)<br />
419 Two Tambour Front S<strong>to</strong>rage Cupboards<br />
(Unit 21)<br />
420 Occasional Table & Two Cantilever Framed<br />
Chairs (Unit 21)<br />
421 Modular Reception Counter, with three<br />
pedestals, blue fabric upholstered swivel<br />
armchair & tambour door s<strong>to</strong>rage cabinet<br />
(Unit 21)<br />
MEETING ROOM<br />
422 Veneered Wood Bow Sided Meeting<br />
Table, 9ft x 4ft, with ten fabric<br />
upholstered stand chairs (Unit 21)<br />
423 Single Door Cupboard, with video/ DVD<br />
player & amplifier (Unit 21)<br />
424 Connect Oscillating Desk Fan (Unit 21)<br />
425 Lectern<br />
426 Framed Picture<br />
FIRST FLOOR<br />
OFFICES<br />
MEETING ROOM<br />
427 SIX SECTION MEETING TABLE, 4.6m x<br />
1.6m, with ten charcoal fabric<br />
upholstered cantilever framed armchairs<br />
(Unit 21)<br />
Lot<br />
Description<br />
ANTE ROOM<br />
428 Two x Two Section Hexagonal Meeting<br />
Tables, each 1.4m across flat with four<br />
green fabric upholstered stand chairs (Unit<br />
21)<br />
429 Double Door Cupboard (Unit 21)<br />
430 Two Framed Pictures (Unit 21)<br />
431 Unicol Projec<strong>to</strong>r Mount Hitachi CPX430W<br />
PRIVATE OFFICE<br />
432 Office Furniture Contents <strong>of</strong> Room,<br />
including desk, four drawer pedestal, table,<br />
four drawer steel filing cabinet, three drawer<br />
pedestal & wall board (Unit 21)<br />
433 Two Armchairs (Unit 21)<br />
434 Framed Picture (Unit 21)<br />
PRIVATE OFFICE<br />
435 Slingsby HT1312 Stair Climbing Case<br />
Truck (Unit 21)<br />
436 Three Charcoal Fabric Upholstered Swivel<br />
Armchairs (Unit 21)<br />
GENERAL OFFICE<br />
437 Office Requisites, as set out on desk, with<br />
printer cartridges (Unit 21)<br />
438 Two Cantilever Framed Wave Front Desk,<br />
with three drawer pedestal (Unit 21)<br />
439 Circular Meeting Table, 1.2m dia., with four<br />
blue fabric upholstered stand chairs (Unit<br />
21)<br />
440 Three Artificial Plants (Unit 21)<br />
441 Two Bisley Five Drawer Steel Filing<br />
Cabinets (Unit 21)<br />
442 Four Hat & Coats Stands (Unit 21)<br />
443 Office Furniture including three wave front<br />
cantilever framed desks, eight multi drawer<br />
pedestals, double door cupboard & book<br />
rack (Unit 21)<br />
444 Two Black Vinyl Upholstered Swivel<br />
Armchairs (Unit 21)<br />
445 Tambour Front Cupboard (Unit 21)<br />
446 Tambour Front Cupboard (Unit 21)<br />
447 Two Matching Tambour Front Cupboards<br />
(Unit 21)<br />
448 Three Matching Tambour Front Cupboards<br />
(Unit 21)<br />
449 Two Green Fabric Upholstered Swivel<br />
Armchairs (Unit 21)<br />
450 Circular Meeting Table, 1m dia., with four<br />
green fabric upholstered stand chairs (Unit<br />
21)<br />
451 Two Telephone Tables, with single door<br />
steel cupboard (Unit 21)<br />
452 Three Green Fabric Upholstered Cantilever<br />
Stand Chairs (Unit 21)
Lot<br />
Description<br />
REST ROOM<br />
453 Four Circular Tables, each 900mm dia.,<br />
with 16 stand chairs (Unit 21)<br />
OPEN PLAN OFFICE<br />
454 Rigid Steel Double Door Cupboard (Unit<br />
21)<br />
455 Two Matching Steel Double Door<br />
Cupboards (Unit 21)<br />
456 Wave Front Cantilever Framed Desk, with<br />
double door cupboard, three drawer<br />
pedestal & four chairs (Unit 21)<br />
457 Three x Eight Compartment Timber Racks<br />
(Unit 21)<br />
458 BT Rollatruc Hand Hydraulic Pallet Truck<br />
(Unit 21)<br />
459 Three Rise Mobile Stepladder (Unit 21)<br />
BALCONY<br />
460 Wall Notice Boards, as set out (Unit 21)<br />
GROUND FLOOR<br />
461 Wall Notice Board, as set out (Unit 21)<br />
PRE-PRESS OFFICE<br />
462 Office Furniture Contents <strong>of</strong> Room,<br />
including desk, three multi drawer<br />
pedestals, book case, three wall mounted<br />
notice boards & two hat and coat stands<br />
(excluding three white book cases &<br />
manuals) (Unit 21)<br />
REST ROOM<br />
463 Loose Contents <strong>of</strong> Rest Room, including<br />
personnel lockers & table (Unit 21)<br />
PRIVATE OFFICE<br />
464 Office Furniture Contents <strong>of</strong> Room,<br />
including desk, two multi drawer pedestals,<br />
three chairs, two four drawer filing cabinets,<br />
one three drawer filing cabinet and double<br />
door cupboard (Unit 21)<br />
Lot<br />
Description<br />
MANAGER’S OFFICE<br />
465 Office Furniture Contents <strong>of</strong> Room,<br />
including seven mainly single pedestal<br />
desks, multi drawer pedestal, two blue<br />
fabric upholstered reception chairs & double<br />
door cupboard (Unit 21)<br />
PRE-PRESS ROOM<br />
466 Chemical Spill Kit & Equipment, as set out<br />
(Unit 21)<br />
467 Four x Four Drawer Steel Filing Cabinets<br />
(Unit 21)<br />
468 Ten Compartment Personnel Locker (Unit<br />
21)<br />
469 Two Benches (Unit 21)<br />
470 Ergomat Rubber Floor Matting (Unit 21)<br />
471 Two Tork Paper Towel Dispensers (Unit<br />
21)<br />
472 Four Charcoal Fabric Upholstered<br />
Cantilever Stand Chairs (Unit 21)<br />
473 Three Charcoal Fabric Upholstered Swivel<br />
Armchairs (Unit 21)<br />
474 Sanyo Upright Vacuum Cleaner (Unit 21)<br />
MANAGER’S OFFICE<br />
475 Office Furniture Contents <strong>of</strong> Room,<br />
including desk, two drawer pedestals, four<br />
chairs, four wall boards & two filing cabinet<br />
(excluding all computer equipment) (Unit<br />
21)<br />
476 Ring Air Conditioning Unit (Unit 21)<br />
477 21 Cantilever Framed Tables and 18<br />
dividers (available for collection from<br />
Maldon, Essex)