PLCYC1 LED 4-page Product Brochure - Selecon

Light to make you look.
Introducing the
PLCyc1 LED luminaire

PLCyc1 LED Luminaire
Delivering a smooth even beam, the PLCyc1 seamlessly blends intense washes of
colour on your cyclorama. Using LED source technology combined with a properly
shaped asymmetrical reflector, the PLCyc1 delivers consistent light distribution
without the compromising performance of vertical or horizontal spreader lenses.
Each luminaire can replace the equivalent of a traditional four colour 1000W per
circuit Cyc luminaire, and with the convenient PowerCon system, the PLCyc1 can
light a typical cyclorama with a single 10A non-dim circuit.
Product features
Typical power consumption varies between 26W and 83W
Infinite colour choices from one RGBW engine
Homogenized light source with no multiple colour shadows
1.35m
1.2m
The performance
of a traditional
4-cell cyc in a single
multi colour luminaire,
delivering a smooth and even
field for cycloramas up to 5m high
PowerCon in and through to
light your cyclorama from one
10A non-dim circuit
Asymmetric reflector directs more light
downward to produce visually even
illumination down a vertical surface

Advanced control
The PLCyc1 LED luminaire has an on-board LCD menu system for setup,
control, and addressing. The menu system is intuitive and offers all
configuration options with a few button presses.
Wireless DMX512 control
Having trouble getting data to your light on set? All PLCyc1 luminaires
support wireless DMX512 control for instant connections without running
control wiring. Each optional wireless receiver also has a DMX512 out
port to control adjacent luminaires. Receivers and transmitters are
available using Wireless Solution W-DMX. For other manufacturers,
please contact your Philips Selecon distributor.
Console control
All PLCyc1 luminaires support wired and wireless
DMX512 control with a choice of 8- or 16-bit control
resolution. With the increased development of LED
luminaires like PL1 and PLCyc1 with 4 or more colours,
additional control is needed for intuitive operation.
All Philips Strand Lighting Palette family controls now
support extended colour control to simplify
programming and luminaire colour matching.
PLCyc LED engine
PLCyc1’s powerful LED engines offer exceptional performance and life.
The Philips Selecon three-year limited warranty includes our guarantee
against premature failure of the LED engine.

30.2
mm
240.4mm
ELECTRICAL SPECIFICATIONS
Source:
1 each, true RGBW 120W LED chip
Output:
> 2000 lumens (white light)
Operating voltage:
100V–240V AC (auto-ranging)
Frequency:
50/60Hz
Current draw:
1.3A at 120VAC, 0.70A at 240VAC
Maximum load with all LEDs at full RGBW
Ambient temperature: 35°–40°C
Control:
On-board menu / DMX512
Standards compliance: ETL/cETL Listed and CE Marked
170.5mm
R143.5mm
R195mm
MECHANICAL SPECIFICATIONS
Construction:
Aluminium, sheet metal, and molded
engineering grade plastic components
Colour:
Black
Weight:
3.4kg (luminaire only)
E
B
A
F
ORDERING INFORMATION
PLCYC1-03
PLCYC1WDMX03
PL1WDMXTR
PLCyc1 LED Luminaire, Black
W-DMX Wireless DMX512 Receiver
(Wireless Solutions), Black
W-DMX Wireless DMX512 Transmitter
C
D
G
A
B
C
D
E
F
PowerCon (AC) Input
PowerCon (AC) Output
DMX512 Input
DMX512 Output / Thru
Yoke Assembly
Yoke Adjustment / Locking Knob
G
LCD Display & Menu System
Philips Selecon
19-21 Kawana Street
Northcote, Auckland 0627
New Zealand
Tel: +64 9 481 0100
Fax: +64 9 481 0101
www.seleconlight.com
Philips Entertainment Lighting Asia
Unit C, 14/F, Roxy Industrial Centre
41-49 Kwai Cheong Road
Kwai Chung, NT,
Hong Kong
Tel: +852 2796 9786
Fax: +852 2798 6545
© Philips Group 2012
All rights reserved. The Company reserves the right to make any variation
in design or construction to the equipment described. E&OE.