Fire Rated Glass Certification - SmartGlass International
Fire Rated Glass Certification - SmartGlass International
Fire Rated Glass Certification - SmartGlass International
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PYRAN S FIRE RESISTING GLASS<br />
CERTIFICATE No CF 291<br />
SCHOTT UK LIMITED<br />
This Certificate of Approval relates to the fire resistance of Pyran S glass when used in the following<br />
applications, as defined in BS 476: Part 22: 1987 subject to the undermentioned conditions.<br />
Application<br />
<strong>Fire</strong> Resistance<br />
Performance Integrity -<br />
(mins)<br />
Timber Screens 30 4<br />
Timber Screens 60 5<br />
Page<br />
No.<br />
Double Glazed Units in Timber Screens 30 – 60 6 – 7<br />
Timber Doorsets 30 8 –11<br />
‘<strong>Fire</strong>stile’ Doorsets 30 12 – 14<br />
Timber Doorsets 60 15 - 16<br />
Steel Screens 30 – 60 – 90 – 120 17 – 20<br />
Steel Doorsets 30 – 60 – 90 – 120 21 – 22<br />
Double Glazed Units in Steel Screens 30 – 60 – 90 23 – 24<br />
Double Glazed Units (comprising Venetian blinds) in Steel<br />
30 25<br />
Screens<br />
Butt-Jointed Screens 30 26 – 29<br />
Butt-Jointed Screens 60 30 – 31<br />
Structural Glazing 30 32 – 34<br />
This product is approved on the basis of:<br />
i) Initial type testing.<br />
ii) A design appraisal against TS25.<br />
iii) <strong>Certification</strong> of quality management system to ISO 9001: 2008.<br />
iv) Inspection and surveillance of factory production control.<br />
v) Audit testing.<br />
This Certificate of Approval must be read in conjunction with CERTIFIRE Technical Schedule TS25,<br />
<strong>Fire</strong> Resistant <strong>Glass</strong>, Glazing Systems and materials.<br />
General Requirements<br />
Where the glass is installed in a timber or steel framed screen, the orientation of the screen shall be<br />
no more than ±10º from the vertical.<br />
There is no restriction to the direction of exposure for the glass i.e. the glass is symmetrical.<br />
Orientation may, however, be restricted by the requirements of a non-symmetrical framing system or<br />
certain double glazed unit specifications.<br />
The edge cover to each pane shall be 25 mm maximum and 10 mm minimum.<br />
The glass is approved in a nominal thickness of 6, 8, 10, 12 and 15 mm.<br />
Page 2 of 34 Signed<br />
Issued: 9 th September 2002<br />
Revised:26 th June 2009<br />
Valid to: 8 th October 2012