Mr. Balraj Bhanot Former Director ARAI, India - Road Safety in India ...

More documents

Recommendations

Info

2. Check Conditions : Condition of the Condition of the wiper blades is bd bad wiper blades is good
3. Check Functioning: • After putting the dust on the entire glass and after five to six wiping cycles the wiping pattern area should be clean. There should not be dust left on the pattern area. ( Test dust is available at ARAI) • Frequency of Wiping : • If there is only one, then it should be minimum 30 cycles/min. • If there are two frequencies the difference between the two should be minimum 15 cycles/min.
Page 1 and 2: Mr. Balraj Bhanot Former Director A
Page 3 and 4: CMV Rule 62 Certificate of Fitness
Page 5 and 6: Item Check fitment Check make/type/
Page 7 and 8: Item Check fitment Check make/type/
Page 9: Examples
Page 13 and 14: CMV Rule 62 Retro‐Reflective Refl
Page 15 and 16: ‣ Full Counter Marking: Means a c
Page 17 and 18: Goods Vehicles : For N2 (above 7.5
Page 19 and 20: Passenger Vehicles : For M2 and M3
Page 21 and 22: TATA 407 Rear Under‐run run Prote
Page 23 and 24: TATA 909 Rear Under‐run run Prote
Page 25 and 26: Rear Under‐run run protection dev
Page 35 and 36: •Inspection and Certification
Page 37 and 38: TYPICAL FACILITY LAYOUT FOR INSPECT
Page 39 and 40: Automation of Safety & Emissions te
Page 41 and 42: Heavy Duty Lane
Page 49 and 50: HD Lane View from Position 3
Page 51 and 52: I&C Center -Burari(Delhi) : Observa
Page 53 and 54: Visual Inspection N o of Vehicles 1
Page 55 and 56: LCV Lane HCV Lane No. of Vehicles t
Page 57 and 58: • Remote Sensing measures polluti
Page 59 and 60: Sites in Pune & Delhi
Page 61 and 62:
Retrofitmnet options • DPFs: (Die
Page 63 and 64:
•Reduces PM by 70 to 90%. If cata
Page 65 and 66:
Prince Michael International Road s
show all

Mr. Balraj Bhanot Former Director ARAI, India - Road Safety in India ...

Create successful ePaper yourself

Delete template?

Save as template?