PS-3.5 - Solubility of Ammonium Chloride Lab
PS-3.5 - Solubility of Ammonium Chloride Lab
PS-3.5 - Solubility of Ammonium Chloride Lab
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
8. Turn up the hot plate to warm the solution to 60°C. Then, repeat steps 6 and 7 with the<br />
solution at this temperature.<br />
9. Turn up the hot plate to warm the solution to 80°C. Then, repeat steps 6 and 7 with the<br />
solution at this temperature.<br />
10. When you have recorded all <strong>of</strong> your data, turn <strong>of</strong>f the hot plate and allow the solution to<br />
cool. Rinse the solutions down the drain. Let the water run continuously for about 1<br />
minute.<br />
11. On a sheet <strong>of</strong> paper, make a graph <strong>of</strong> the solubility <strong>of</strong> ammonium chloride versus<br />
temperature. Plot temperature on the horizontal x-axis and solubility (in spoonfuls per 50<br />
mL water) on the vertical axis.<br />
Observations:<br />
Temperature<br />
(°C)<br />
18-20<br />
Number <strong>of</strong> Spoonfuls <strong>of</strong> <strong>Ammonium</strong> <strong>Chloride</strong><br />
Dissolved<br />
40<br />
60<br />
80<br />
Include the following questions in your discussion and don’t forget a conclusion:<br />
1. Create a graph <strong>of</strong> the above information.<br />
2. Predict what effect, if any, you think the size <strong>of</strong> salt grains would have on their solubility.<br />
Explain your answer.<br />
3. Based on your graph and your observations what do you think the solubility <strong>of</strong> ammonium<br />
chloride (in spoonfuls per 50 mL water) would be at 10°C? At 70°C? At 100°C?