SAFETY CATALOG - Sofab.net
SAFETY CATALOG - Sofab.net
SAFETY CATALOG - Sofab.net
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Safety & Security Systems<br />
Personal Safety Equipments<br />
ST. GLOVE Anti Cutting STAINLESS STEEL Mesh Gloves. DIN EN 1082:1996<br />
These gloves are sold per single piece. Each Glove can be used for Left or Right Hand Use. The<br />
gloves come from the factory in Standard Left Hand. To use for right hand, please reverse the Glove<br />
and it will become a Right Hander. The information provided below have been written by the manufacturer<br />
and it‘s for your personal protection. Please reviews them carefully as to safe guard your<br />
hands and your technical personal hands. Please make sure that all users have completely understood<br />
the safety instructions and are observing them.<br />
Material Type:The St. Glove is constructed of 316 Stainless Steel heavy duty woven wire material.<br />
St. Glove has been manufactured from an electric conductive material and may not be used near systems<br />
carrying voltage.<br />
Caring for your St. Glove: Clean the St. Glove including the band after each use, St. Glove withstands<br />
temperatures up to 150° C, If no special devices are available to clean or sterilize the gloves, we<br />
recommend cleaning your glove with warm water (aprox. 50° C) and adding standard cleaning agents.<br />
Brush off the gloves vigorously in the process, DO NOT; under any circumstances allow the gloves to<br />
strike any hard surfaces.<br />
Areas of Application:- St. Glove provides your Hands and Fingers the protection from cuts from<br />
knife and sharp objects. These gloves are applicable for the following industries:<br />
Manual Grinding Industry, Manual Tooling Industry, Underwater Repair Work (since skin becomes<br />
extremely venerable to cuts), Manual Wood and Metal Carving Industry, Manual Meet/Poultry/Fish<br />
Processing Plants, Manual Food Processing Industry, Home and Industrial Kitchens. Wear St. Glove<br />
only when using hand knives and Sharp objects, Hang your St. Glove protective equipment in dry<br />
cabi<strong>net</strong>s when storing for long periods.<br />
Usage:<br />
Slip on the glove. Hold your hand palm up and grasp the buckle. (The slit on the edge of the hand<br />
is covered by means of specific material processing). Now bring the buckle and tighten it around<br />
toward the reversible push button, then close the push button snap. The snap button and buckle<br />
ensures that the slit on the edge of the hand remains closed while you are working. The tight grating<br />
of the ring clasps allows the glove to be adjusted individually to the circumference of the<br />
wearer's wrist. Do not use the cuffed modules without the wrist fastener. !!!<br />
PRICE:799 SR/DhsSingle Hand Piece.<br />
SOFRAF ELECTROSOFT - 1000 Volt Electrical Shock Resistance Gloves.<br />
Specifications: Proof Tested at 5000 Volts, Maximum Voltage use 1000 Volts, Available<br />
Sizes 8,9,10,11RECOMMENDATIONS DURING USAGE:<br />
Keep the gloves In a dry, dark place at a temperature from 50° to 70° Fahrenheit. When gloves<br />
become soiled they should be washed with soap and water at a temperature not exceeding 150°<br />
Fahrenheit, thoroughly dried and dusted with talc. If Insulating compounds such as tar and paint continue to stick to the<br />
gloves, the affected parts should be cleaned immediately with a Suitable solvent avoiding excessive use, and then immediately<br />
washed and treated as prescribed. Petrol, paraffin or-white spirit should not be used to remove such compounds.<br />
Gloves which become wet in use or cleaning must be dried thoroughly without causing the temperature to<br />
exceed 150° Fahrenheit Gloves that are used frequently should be tested‘ at intervals less than 6 months. Gloves that<br />
are used only occasionally should be tested after each use and, in any case, at intervals of not more than 12 months.<br />
Gloves held in stock should be retested at Intervals not exceeding 12 months. Made in France.<br />
PRICE: 290 SR/AED<br />
HEVEA-PRENE GLOVES (Color Blue/Yellow).<br />
Chemical Resistant Heavy Duty Gloves.<br />
Hevee-Prene Gloves are produced with a combination of sophisticated dipping technology<br />
and a special formulation of polychloroprene over natural rubber latex.<br />
PRICE: 39 SR/Dhs<br />
HEVEA-PRENE GLOVES (Color Green).<br />
Oil & Greece Resistant Heavy Duty Gloves.<br />
Hevee-Prene Gloves are produced with a combination of sophisticated dipping technology and a special<br />
formulation of polychloroprene over natural rubber latex.<br />
PRICE: 27 SR/AED<br />
Sizes:ZSTAINLESSGLOVE-S<br />
ZSTAINLESSGLOVE-M<br />
ZSTAINLESSGLOVE-L<br />
ZSTAINLESSGLOVE-XL<br />
<strong>SAFETY</strong> HELMET.<br />
ZHAT-SP Made in Spain: PRICE: 27 SR/Dhs<br />
ZHAT-UK Made in the UK: PRICE: 22 SR/Dhs<br />
ZHAT-CH Made in China: PRICE : 15 SR/Dhs<br />
SOFAB Hat<br />
PRICE: 5 SR/Dhs<br />
GENERAL USE GLOVES.<br />
Made in China<br />
PRICE: 3.5 SR/Dhs<br />
SOFAB Tool<br />
PRICE: 10 SR/Dhs<br />
Email: help@sofab.<strong>net</strong><br />
17<br />
Web: www.sofab.<strong>net</strong>
Change language