SELF LEVELING COMPOUND VE 50 - Soudal
SELF LEVELING COMPOUND VE 50 - Soudal
SELF LEVELING COMPOUND VE 50 - Soudal
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>SELF</strong> <strong>LE<strong>VE</strong>LING</strong> <strong>COMPOUND</strong> <strong>VE</strong> <strong>50</strong><br />
Technical Data Sheet<br />
Date:22/08/06 Page 1 of 2<br />
Technical Data:<br />
Base<br />
Cement<br />
Consistency<br />
Powder<br />
Slake time (restir)<br />
Approx. 5 min.<br />
Processing time*<br />
Approx. 20 min.<br />
Ready for traffic*<br />
After approx. 1 hour<br />
Ready for installation*<br />
PVC, textile, rubber after 3hrs.<br />
Linoleum, cork and wood after at least 24 hrs.<br />
Water ratio<br />
Approx. 5,5 ltr/25 kg powder<br />
Consumption<br />
Approx. 1,6 kg/m² per mm thickness<br />
* This varies according to ambient conditions such as temperature, humidity, substrate etc.<br />
Product:<br />
Self Leveling Compound <strong>VE</strong><strong>50</strong> is a cement based<br />
leveling compound with high polymer content and<br />
excellent self leveling properties.<br />
Characteristics:<br />
- Low tension build up<br />
- Excellent final grip<br />
- Very low emission (EC-1 according to GEV)<br />
- From 1 – 15 mm layer thickness<br />
- Excellent self leveling properties<br />
- Extremely fast setting<br />
Applications:<br />
For preparing ready-to-install substrates up to15<br />
mm layer thickness. For the immediate installation<br />
of floor coverings. Suitable for install-in-one-day<br />
applications.<br />
Packaging:<br />
Colour: grey<br />
Packaging: 25kg<br />
Shelf life:<br />
6 months in unopened original packaging in a dry<br />
storage place at temperatures between +5°C and<br />
+25°.<br />
Substrate:<br />
Self Leveling Compound <strong>VE</strong><strong>50</strong> should be applied to<br />
an even, dry, clean and smooth substrate, which is<br />
also free from irregularities and cracks. Old<br />
adhesive remains may adversely affect the<br />
adhesion and must be removed mechanically.<br />
Loose parts must be removed before the<br />
application of the leveling compound.<br />
Smooth surfaces like anhydrite should be<br />
roughened, and if necessary the top layer should<br />
be removed.<br />
Porous mineral surfaces may require priming with<br />
<strong>Soudal</strong> WBPR-11P before installation. Powdery<br />
surfaces can be treated (after consulting the <strong>Soudal</strong><br />
technical service) with <strong>Soudal</strong> WBPR-21P deep<br />
primer.<br />
Load bearing, non-absorbent substrates, such as<br />
ceramic tile, terrazzo, poured mastic asphalt and<br />
the like, can be leveled with Self Leveling<br />
Compound <strong>VE</strong><strong>50</strong> without any prior primer<br />
application as long as they are clean and free of<br />
dust. Clean stone floors with caustic soda or<br />
another suitable cleaner. Once cleaned, rinse the<br />
tiles thoroughly with plenty of clean water.<br />
A preliminary compatibility test is<br />
recommended on every surface.<br />
Applying the compound:<br />
Method: Use clean water to mix Self Leveling<br />
Compound <strong>VE</strong><strong>50</strong> smoothly with an electric mixer at<br />
approx. 600 RPM. Allow mixture to slake for<br />
approx. 5 minutes and stir again. Apply leveling<br />
compound with a leveling trowel or rake.<br />
If necessary, a second layer application can follow<br />
wet on wet immediately after the substrate is ready<br />
for traffic. Otherwise re-prime with <strong>Soudal</strong><br />
WBPR-11P.<br />
Remark: The directives contained in this documentation are the result of our experiments and of our experience and have been submitted in good faith.<br />
Because of the diversity of the materials and substrates and the great number of possible applications which are out of our control, we cannot accept any<br />
responsability for the results obtained. In every case it is recommended to carry out preliminary experiments.<br />
<strong>Soudal</strong> NV Everdongenlaan 18-20 2300 Turnhout, Belgium<br />
Tel.: +32 (0)14-42.42.31 Fax: +32 (0)14-42.65.14 www.soudal.com
<strong>SELF</strong> <strong>LE<strong>VE</strong>LING</strong> <strong>COMPOUND</strong> <strong>VE</strong> <strong>50</strong><br />
Technical Data Sheet<br />
Date:22/08/06 Page 2 of 2<br />
Avoid direct sun exposure and draught during the<br />
curing process.<br />
Application temperature: +5°C to +30°C<br />
Clean: Self Leveling Compound <strong>VE</strong><strong>50</strong> may be<br />
removed from tools with water immediately after<br />
application.<br />
Repair: with same material.<br />
Health- and safety recommendations:<br />
Apply the usual industrial hygiene precautions.<br />
Consult the label for more information.<br />
Remark: The directives contained in this documentation are the result of our experiments and of our experience and have been submitted in good faith.<br />
Because of the diversity of the materials and substrates and the great number of possible applications which are out of our control, we cannot accept any<br />
responsability for the results obtained. In every case it is recommended to carry out preliminary experiments.<br />
<strong>Soudal</strong> NV Everdongenlaan 18-20 2300 Turnhout, Belgium<br />
Tel.: +32 (0)14-42.42.31 Fax: +32 (0)14-42.65.14 www.soudal.com