NEW - Cooltech Leisure
NEW - Cooltech Leisure
NEW - Cooltech Leisure
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Battery controller<br />
87<br />
exact battery analysis<br />
neW! WAECO PerfectControl MPC 01<br />
3.16<br />
Intelligent battery management system with display and a<br />
battery sensor<br />
≥ Input voltage: 8 – 30 volts<br />
≥ Current consumption: 150 mA in display mode,<br />
10 mA in standby mode,<br />
≥ CIS bus and RS232 interface<br />
≥ Three additional battery sensors (accessory) can be connected<br />
≥ Display dimensions (W x H x D): 130 x 115 x 6 mm<br />
Installation frame dimensions (W x H x D): 150 x 136 x 16 mm<br />
(included in scope of delivery)<br />
neW!<br />
WAECO PerfectControl MPC 01<br />
Ref. No. 91025000041<br />
Optional extras: Hella Sensor MCA-HS1 // Ref. No.: 9102500038<br />
Charger<br />
i/o box<br />
Comfort bus<br />
Multiplex box<br />
(included in scope of delivery)<br />
Mobile energy systems<br />
battery sensor<br />
battery sensor<br />
battery sensor<br />
M A C<br />
Starter battery<br />
Supply battery<br />
Supply battery<br />
“intelligent” battery sensor<br />
It doesn't miss a thing the intelligent battery sensor, which comes with the PerfectControl MPC 01,<br />
measures the effective current and voltage of the battery connected. It uses this to calculate the<br />
capacities and charge status. It ensures that when the battery is discharged or faulty, a warning<br />
and the command to disconnect it from the load circuit is issued. WAECO PerfectCharge battery<br />
chargers show their full potential with its help: the battery sensor adapts the charge voltage to the<br />
respective battery characteristics, resulting in a particularly fast, and an optimal, charge.<br />
information and operating panel<br />
The pleasingly self-explanatory display of the PerfectControl MPC 01 ensures all information on the status of up to four batteries can be called up<br />
any time. The various menus can be displayed by turning the rotary pushbutton. The menu displayed can be accessed at the touch of the button,<br />
allowing parameters to be changed.<br />
Start display: Enter the menus by<br />
turning the button<br />
The current battery data: voltage,<br />
current, remaining operating<br />
time, capacity<br />
Information on the battery charger<br />
connected: Mains connection,<br />
charge current of 20 A<br />
Display of the status of all<br />
batteries connected<br />
Contents, specifications and availability are subject to change due to the technical improvement.
Change language