Contents Important Tools Required - National Cycle, Inc.
Contents Important Tools Required - National Cycle, Inc.
Contents Important Tools Required - National Cycle, Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Preparation<br />
Prior to<br />
Installation<br />
1.<br />
2.<br />
Place the motorcycle securely on its side stand.<br />
Remove the plastic caps, item a, from the<br />
frame (small screwdriver), they will not be<br />
reused. Figure 1.<br />
a<br />
Figure 1<br />
3.<br />
Remove the front floor board bolt, item b,<br />
one from each side of the motorcycle (14mm<br />
wrench). Set these bolts aside for reuse. Figure 2.<br />
b<br />
Figure 2<br />
4.<br />
Thread one M10 x 60 bolt, item A, through the<br />
tubular mount section on the right engine<br />
guard, item B, and into one end of the connection<br />
rod, item C. Leave very loose. Figure 3.<br />
C<br />
A<br />
B<br />
Figure 3<br />
Installation<br />
1.<br />
Insert the connection rod, item C, into the tube<br />
in the motorcycle frame. Figure 4.<br />
C<br />
B<br />
Figure 4