Genie SCC Supreme 120 PS PDF

TM
Quick Study
Applications
Protection against liquids
On-line and portable analyzers
GC’s, Mass Specs, O , H S, 2 2
Moisture, and others
Spot, composite, or continuous gas
sampling in any process industry
including natural gas, petrochemical,
and oil refining
Gas sample conditioning
Benefits
Helps preserve sample integrity
Superior analyzer protection
Quick and easy to install and maintain
Quick and easy membrane inspection
Economical
Features
U.S. Patent 5,476,586; Patents Pending
Genie® Membrane Technology TM
TM
Liquid Block option
Low internal volume
Straight through Bypass
Built-in membrane retention
Threaded housing cover
All connection ports on the housing
Back mounting
Universal Assembly option
The Supreme 100 Series remove 100% of
entrained liquid and particulate in gas samples, which allow only gas sample
to flow to analyzers. This action protects analyzers and other sampling
components against liquid damage. The Genie ® Supreme Series 100 models
can accommodate a wide range of applications just as the original Genie ®
Series 100 Membrane Separators, yet they offer an improved housing
design for easy maintenance and the innovative Liquid Block Technology
that prevents liquid from being forced across the membrane should sample
line pressure conditions become upset. Genie ® Supreme Series Membrane
Separators are safe and easy to install and maintain, especially in heated,
densely populated cabinets.
The Model 120 is ideal for low flow applications and can
withstand high pressure in the housing. This high pressure model has a 1”
cross sectional membrane area, the same as the original Genie ® Model 101,
and it is ideal for the removal of relatively small amounts of liquid present
on a continuous basis; it is also perfect for protecting gas chromatographs,
mass spectrometers, O 2 analyzers, moisture analyzers, and other analyzers
with relatively small flow requirements. Please note that special fittings may
be ordered, such as a Universal Assembly. Additional information such as
FAQs is available.
Technical Specifications
Maximum pressure rating
Maximum recommended
supply pressure
(For more information see product FAQs)
Maximum Liquid Block
valve auto-reset pressure
Maximum temperature
Maximum recommended
membrane flow rate
(For higher flow rates contact the factory)
Bypass flow rates
Port sizes
Internal volume
Wetted materials
2,000 psig
Lowest possible pressure consistent with application*
*Must not exceed “Pressure rating” listed above
35 psig*
*Slowly open the supply pressure so that the minimum differential
pressure required to shut-off the Liquid Block is not met or exceeded.
185 °F (85 °C) for Type 5 & BTU membrane
302 °F (150 °C) for Hi-Flow Backed membrane
1,440 cc/min for Type 5 & BTU membrane*
5,000 cc/min for Hi-Flow Backed membrane*
*Maximum flow results in approximately 2 psi membrane
differential pressure
Requirement varies with application
Inlet, Outlet, & Bypass: 1/8” female NPT
Total with Liquid Block: 2.4 cc
Upstream of membrane: 1.3 cc
Downstream of membrane: 1.1 cc
Total without Liquid Block: 2.1 cc
Upstream of membrane: 1.1 cc
Downstream of membrane: 1.0 cc
Machined parts : 316 stainless steel / NACE compliant
All other metal parts: stainless steel / NACE compliant
Sealing material: Viton ® standard
Membrane: inert
An ISO 9001:2000 certified company
Genie, ® Genie ® Supreme, TM Supreme Series, TM
Genie ® Membrane Technology, TM Liquid Block, TM Genie ® Membrane Separator, TM and Genie ® Probes TM are trademarks or
registered trademarks of A + Corporation, LLC. All other referenced trademarks are the property of their respective owners.

Model Numbering & Additional Part Numbers
Your model number is determined by your specific needs. Choose options below.
Sealing material !
0 = Viton ® 1 = Kalrez ®
(other materials available upon request)
Membrane type 5 = Type 5 6 = BTU 7 = Hi–Flow Backed
Liquid Block TM Blank = No Liquid Block TM LB = Liquid Block TM
!
Mounting bracket accessory
O-ring replacement
How to build the model number:
Sealing material
Membrane type
Liquid Block TM option
120 0 SS
Part # = 120-509-SS (sold separately)
Part # = 120-500 (sold separately)
How to build the replacement membrane kit number:
(Five membranes per kit. O-rings sold separately)
Membrane type
120 5 X
! We cannot recommend specific sealing materials due to the complex nature of sample stream compositions. Temperature and pressure also may be factors.
! Unless specified otherwise, the product will ship with our standard sealing materials and materials of construction stated in the technical specifications section
of the corresponding Product Sheet. ! Please refer to www.dupontelastomers.com for sealing material recommendations and advice. It is the user’s
responsibility to specify the sealing materials and other materials of construction for their application.
Dimensions
Side View
1.645”
0.635”
1.075”
0.062”
Front View
1.750”
1.350”
INLET
0.635”
1.375”
1.375”
1.650” OUTLET
0.707” 2.375” 2.750”
2.750”
INLET
OUTLET
1.500”
FLAT
TO
FLAT
BYPASS
BYPASS
1.650”
1.730”
0.265”
1.075”
1.350”
OPTIONAL
MOUNTING
BRACKET
Local Distributor:
An ISO 9001:2000 certified company
Manufacturer
A+ Corporation, LLC
41041 Black Bayou Road
Gonzales, LA 70737
Call for expert product application assistance:
Phone: (225)-644-5255 Website: www.geniefilters.com
Fax: (225)-644-3975 E-mail: sales@geniefilters.com
©2009 A+ Corporation, LLC. All rights reserved.
SCC-Supreme120-PS_0609