SERVICE MANUAL - Stag ICP AG
SERVICE MANUAL - Stag ICP AG
SERVICE MANUAL - Stag ICP AG
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Open the door.<br />
Unscrew the 7 screws from the HINGE COVER.<br />
Put a flat ( - ) screwdriver into the openng of the hinge,<br />
and pull out the hinge cover.<br />
Unscrew a screw from the lower side of door.<br />
Disassemble the door upward.<br />
Be careful! The door is heavy.<br />
<br />
Open the door and disassemble the CLAMP<br />
ASSEMBLY.<br />
Unscrew the 2 screws.<br />
NOTE<br />
• Reconnect the connector after replacing the<br />
DOOR SWITCH ASSEMBLY.<br />
34