Standofleet. Refinishing systems for commercial vehicles. - Standox

Standofleet.
Refinishing systems for commercial vehicles.
The Art of Refinishing.

Standofleet...

Introducing Standofleet, Standox
sets new standards with regard to
flexibility, quality and ease of
application in commercial vehicle
refinishing.
...the future of commercial
vehicle refinishing.
Standofleet is based on a new pigment
technology. The innovative ”tinting
system” is the result of a consistent further
development of the 2K technology.
Using Standofleet, you can easily meet
the future needs of the market. No
matter whether you and your customers
focus on high quality, easy application,
environmental compatibility, resistance
or efficiency: Standofleet has the right
solution for all requirements.
Standofleet allows you to generate
different topcoats by combining various
mixing pastes and binders in a modular
system. One system is all you need to
coat the chassis of a construction site
vehicle or the body of a coach. At the
same time Standofleet lets you take care
of all the details which make the difference.
By selecting the components, you
can determine the resistance, resilience
and gloss of the refinishing result.
Even though Standofleet offers maximum
flexibility, the number of required
components is low. Just 22 mixing pastes
are enough to cover the entire colour
spectrum of commercial vehicle
refinishing.
Standofleet. The future of commercial
vehicle refinishing has begun.

One for three: a single mixing
system only gives you three topcoat
systems.
Increased efficiency to improve
your competitiveness.
Efficiency and profitability are what
counts in commercial vehicle refinishing.
Standofleet provides you with a paint
system that adapts to your needs.
The Standofleet mixing system offers a
comprehensive range of colour shades
based on just a few components. Your
benefit: all colour shades are always at
hand in a single system, keeping storage
costs low. And yet you will not miss
anything in day-to-day use.
The high solid content of the HS paints
ensures a high yield and great opacity. So
you can refinish more vehicles than before
and meet tomorrow’s VOC requirements
already today.
Efficiency and productivity can only be
achieved through consistent exploitation
of all potentials for rationalization. Your
technical advisor from Standox will analyze
your special requirements on location
so you can benefit from a paint system
that is perfectly tailored to your needs.
Areas for Standofleet
application

Standofleet
System components.
The demands made on commercial vehicle finishes
are just as varied as the possible coat build-ups.
Standofleet is the perfect system to satisfy all these
demands.
STANDOFLEET 2K HS Topcoat
Two-pack polyurethane topcoat for a top-class finish
• excellent weather resistance
• maximum mechanical resistance
• excellent chemical resistance
• VOC-compliant
• high opacity
• high cost-efficiency
STANDOFLEET 2K MS Topcoat
Two-pack polyurethane topcoat for use on bodywork
• good gloss and colour retention
• high mechanical and chemical resistance
• fast drying
• good chemical resistance
• good opacity
STANDOFLEET Wash Primer 1:1 Transparent
Passivating acid primer for three-coat finishing
• excellent corrosion protection properties
• for difficult substrates
• high adhesion
STANDOFLEET Reaction Primer 2:1
Two-pack primer for difficult surfaces such as aluminium
and galvanized substrates
• excellent corrosion protection
• suitable for two-coat and three-coat build-ups
STANDOFLEET 1K Primer Grey
One-pack primer for cost-efficient refinishing
• fast drying
• excellent adhesion properties
STANDOFLEET Epoxy Surfacer 3:1
Special thixotropic filler
• excellent corrosion protection
• excellent hold-out on vertical surfaces
• suitable for two-coat and three-coat build-ups
STANDOFLEET 1K Welding Primer Red Brown
One-pack acid primer
• good corrosion protection
• no need for welding test
• fast drying

STANDOFLEET 2K MS Chassis Paint
Two-pack polyurethane topcoat for chassis coating
• fast and reliable application
• good through drying
• only available as ready-mix
STANDOFLEET 2K HS High Build Topcoat
Two-pack polyurethane topcoat for tough conditions
• maximum mechanical and chemical resistance
• good filling power and high film thickness
• applied in one spray pass
• high cost-efficiency
• VOC-compliant
STANDOFLEET 2K Universal Primer Filler
Two-pack polyurethane primer filler for two-coat
build-ups on all metallic substrates
• excellent filling power
• fast drying
• can be recoated after short time
STANDOFLEET 2K High Build Primer Grey
Two-pack primer for high standards
• excellent filling power
• can be stored outside for up to 6 months
• for two-coat build-ups
• no need for welding test
STANDOFLEET 2K Primer Surfacer Light Grey
Two-pack polyurethane surfacer for refinishing
• easily sanded
• adhesion promoter for chassis refinishing
• also suitable for wet-on-wet application
STANDOFLEET 2K Non Sanding Filler
Special non-sanding filler for cost-efficient finishing
• excellent spray absorption
• superb topcoat gloss
STANDOFLEET 2K Sealer Transparent
Transparent two-pack polyurethane sealer
• transparent adhesion promoter
• ideal for cost-efficient refinishing
• good adhesion on unsanded surfaces

Standofleet is the right solution for
all substrates of heavy-duty
trucks, specialized vehicles or
buses.
One refinishing system for
all applications.
No matter whether you use Standofleet
on steel, aluminium or plastic, you will
always achieve a perfect result. Thanks
to the special components available for
all kinds of problems and applications.
Hardeners, binders or thinners -
developed individually for special
requirements - provide for optimum
refinishing results in perfect quality
adapted to your equipment and climatic
conditions.
In a nutshell: Standofleet is the
universal solution for your commercial
vehicle refinishing business.
Cabin
• steel
• aluminium
• plastic
Chassis
• uncoated/zinc-coated steel
• old paintwork
• aluminium
Superstructures
• uncoated/zinc-coated steel
• old paintwork
• aluminium
• plastic

Perfect tools for
perfect quality.
Whatever the colour, Standofleet puts
you in control.
The materials for chassis and superstructures
change all the time. Today,
they are made from steel, aluminium
or plastic and new trends continue to
emerge. This is why Standox offers
comprehensive support in addition to
a special Standofleet product training
so that you will benefit from Standofleet
right from the first day you use it.
Perfect tinting is a decisive factor in the
refinishing business. Standofleet offers you
proven tools to achieve this.
The Standofleet Colorposter shows all
colour shades and the major tints at one
glance. In the Standofleet Color Box you
find more than 3.000 colour shades - in
chronological order - on large painted
fans. And then there is Genius, an advanced
colour shade measuring system.
Of course you can always call the Standox
Coloristics Hotline where our experts will
help you in next to no time.

Standox GmbH · Christbusch 45 · D-42285 Wuppertal · Germany
44049588 GB 0803 2000 www.standox.com