You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
83 Carbon Metallic Highway • Clover, SC • 29710 • Tel: 803-222-2141 • Fax: 803-222-8134<br />
www.performancefriction.com<br />
<strong>Star</strong> <strong>Mazda</strong> Performance Friction Corp. Inc. Disc Installation Instructions<br />
Disc<br />
Wheel Mounting<br />
Surface<br />
Aluminum Hub /<br />
Rotor Hat<br />
Bobbin<br />
Nut<br />
Washer<br />
<strong>Star</strong> <strong>Mazda</strong> Floating Disc Assembly Steps:<br />
1. Place disc onto hub / rotor hat and align flanges of the disc with the bolt pattern of the hat<br />
2. <strong>PFC</strong> recommends a small dab of nickel anti-seize on the peg-drives. Place peg-drive through the<br />
disc flange window and install the washers and nuts as show in the diagram below. The order you<br />
install the bobbins DOES NOT matter.<br />
3. With all nuts hand tight, torque each nut to the recommended torque of 80in.lbs (9Nm) in a star like<br />
pattern.<br />
4. Once all the hardware is tightened, you can now square the <strong>PFC</strong> peg-drive to the slot windows by<br />
using an Allen wrench on the broached socket head of the <strong>PFC</strong> peg-drive.<br />
5. Check for float by tapping the discs with a soft blow hammer and listen for the “rattle”.<br />
6. New <strong>PFC</strong> discs will burnish with new or used pads. <strong>PFC</strong> discs are heat-treated and stress relieved.