draft tower portfolio - Micro Matic USA

GAS EQUIPMENT 155
GAS ANALYZER GAS -& TITLE LEAK TM
DETECTORS
Beer Check is a revolutionary tool the draught service technician or brewer will find indispensable. Beer
Check is hand-held, and easy to use, providing a fast accurate reading.
CO2 in N2 Analyze the percentage of CO2 in nitrogen. Accuracy: +1.0%
CO2 in Air Analyze the percentage of CO2 in air. Accuracy: +1.0%
O2 in N2 Analyze the oxygen percentage in nitrogen. Accuracy: +0.5%
Leak Sensor This function uses a sensing wand to “listen" for leaks. Beer Check is unique in being able
to sense any gas. Most electronic leak detectors can only sense specific gases like CO2 or refrigerants.
Accuracy: able to locate leaks down to .2 scfh (cubic feet per hour at standard conditions) or less.
Specifications:
• Dimensions: 3 7⁄8"W x 5 ¾ "H x 1¾ "D
• Weight: 9ozs.
• Power: 9 volt battery
MV022
Part No.
MV020
MV022
Desc ription
Beer Check with adapter kit
Beer Check with adapter kit and leak sensor wand
LEAK DETECTOR
AccuTools CO2 leak detector is the most technologically
advanced of its kind. This fully automatic detector's small size
and high sensitivity combine to create an easy to handle tool
that is ultra effective at locating even the most difficult-tofind
leaks.
EL-720
Specifications:
• Body: 8" x 2½ " x 2 1/4 ", Probe: 12"
• Weight: 15 oz. with batteries (4 x AA)
• High Sensitivity: Less than 400 ppm over ambient
• Response Time: 1 second
PRESSURE TESTER
EL-720
MV020
CO2 GAS LEAK?
Tracks down hard to find leaks
with a push of a button.
Assure the accuracy of dispense system regulator
gauges. The tool is used to calibrate 0-60 low
pressure gauges and features a “zero adjusting.
pointer for calibration of the tester/s gauge. Test
from either the regulator or the coupler! The tester is
designed for systems utilizing CO2 only.
PT1000
PT-1000
www.micromatic.com