Safety data sheet - BASF Construction Chemicals Pacific
Safety data sheet - BASF Construction Chemicals Pacific
Safety data sheet - BASF Construction Chemicals Pacific
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Page: 4/9<br />
<strong>BASF</strong> <strong>Safety</strong> <strong>data</strong> <strong>sheet</strong><br />
Date / Revised: 17.10.2012 Version: 1.0<br />
Product: MASTERFLOW 678 DP PLUS PTB<br />
(30559173/SDS_GEN_AU/EN)<br />
Date of print 17.10.2012<br />
Further information on storage conditions: Keep only in the original container in a cool, dry, wellventilated<br />
place away from ignition sources, heat or flame. Protect from direct sunlight. Store<br />
protected against freezing.<br />
Storage stability:<br />
Storage temperature: 5 - 35 °C<br />
The packed product is not damaged by low temperatures or by frost.<br />
The packed product will not be damaged by high temperatures.<br />
8. Exposure controls and personal protection<br />
Components with occupational exposure limits<br />
The substances without values are not listed in the occupational exposure regulations for the validity<br />
area of this safety <strong>data</strong> <strong>sheet</strong>.<br />
no exposure standard allocated<br />
Personal protective equipment<br />
Respiratory protection:<br />
Wear respiratory protection if ventilation is inadequate. Combination filter for gases/vapours of<br />
organic, inorganic, acid inorganic and alkaline compounds (e.g. EN 14387 Type ABEK).<br />
Hand protection:<br />
Suitable chemical resistant safety gloves (EN 374) also with prolonged, direct contact<br />
(Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to<br />
EN 374): E.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), butyl rubber (0.7 mm) and other<br />
Manufacturer's directions for use should be observed because of great diversity of types.<br />
Eye protection:<br />
Tightly fitting safety goggles (splash goggles) (e.g. EN 166)<br />
Body protection:<br />
Body protection must be chosen based on level of activity and exposure.<br />
General safety and hygiene measures:<br />
Do not inhale gases/vapours/aerosols. Avoid contact with the skin, eyes and clothing. Handle in<br />
accordance with good building materials hygiene and safety practice. When using, do not eat, drink<br />
or smoke. Hands and/or face should be washed before breaks and at the end of the shift. At the end<br />
of the shift the skin should be cleaned and skin-care agents applied. Gloves must be inspected<br />
regularly and prior to each use. Replace if necessary (e.g. pinhole leaks).<br />
9. Physical and Chemical Properties<br />
Form: liquid<br />
Colour: amber<br />
Odour: amine-like