Mimic Cabinet BUR-200 - Autronica Fire and Security

Mimic Cabinet BUR-200
Autroprime Interactive Fire Detection System
Product Datasheet
Features
Cabinet including 1 Mimic Driver BUR-200 and
16 programmable relays
1 Mimic Driver is capable of driving 32 current
limited LEDs
A Mimic Driver is provided with 8 standard
monitored inputs
A maximum of 8 Mimic Drivers can be connected
to the RS-485 Panel Bus, providing a total of 256
outputs and 64 monitored inputs
Powered by 24V DC, redundant, monitored
Lamptest
LED intensity control
Designed to meet EN 54 and SOLAS
requirements, and conforms to CE standards
Application/Description
The Mimic Cabinet BUR-200 is specifically designed
for use in maritime applications. It consists of 1
Mimic Driver BUR-200 and 16 programmable relays.
One Mimic Driver that is capable of driving 32 LEDs
with series resistors on a mimic panel for additional
indication of alarms. In addition, 8 standard
monitored inputs can be used for reading various
switches.
The Mimic Driver is connected to the RS-485 Panel
Bus (see drawing on next page).
Power redundancy is achieved by using a daisychain
connection with master and slave drivers.
For detailed information on the Mimic Driver, refer to
separate datasheet for BUR-200.
Technical specifications
Dimensions (mm) 420 x 346 x 140
Weight (g)
Materials
Protection class
Operating
Temperature
Storage
Temperature
Humidity
Power supply
Current
consumption
Total load BUR-200
Communication
8,0 kg
Steel cabinet
IEC-529 / IP30
-15 o C to +70 o C
-40 o C to +70 o C
0 to 95% non-condensing
24VDC (18-32V)
Maximum 25mA
Maximum 500mA
RS-485 panel bus
Part number
Description
116-71211551 BUR-200 Mimic Cabinet
BUR-200 Mimic Cabinet is delivered with the following
relays:
116-7624-030.0002 Relay PLC-RSC-24DC/21-21
116-7624-030.0001 Relay PLC-RSC-24DC/21
116-P-BUR200CABINET/CGB, Rev. C, 2010-09-22
Protecting life, environment and property…

1
1
7
6
5
4
3
2
7
6
5
4
3
2
8
8
6
5
4
3
2
1
7
6
5
4
3
2
1
7
6
5
4
3
2
7
6
5
4
3
2
7
6
5
4
3
2
7
6
5
4
3
2
7
6
5
4
3
2
7
6
5
4
3
2
7
6
5
4
3
2
7
6
5
4
3
2
Mimic Cabinet BUR-200
Schematics
Note:
2k Ohm resistors must be installed on the monitored
inputs J13 and J14. A jumper must be installed
between J12-1 and J12-2.
J13
J15
J16
J17
J18
J19
Out 1
Out 2
Out 3
Out 4
Out 5
Out 6
Out 7
Out 8
Out 9
Out 10
Out 11
Out 12
Out 13
Out 14
Out 15
Out 16
Out 17
Out 18
Out 19
Out 20
Out 21
Out 22
Out 23
Out 24
Out 25
Out 26
Out 27
Out 28
Out 29
Out 30
Out 31
Out 32
See
Manual
Inp. 4-
Inp. 4+
Inp. 3-
Inp. 3+
Inp. 2-
Inp. 2+
Inp. 1-
Inp. 1+
8 8
1 1
+
+
+
+
+
+
+
+
8 8
1 1
+
+
+
+
+
+
+
+
8 8
1 1
+
+
+
+
+
+
+
+
8 8
1 1
+
+
+
+
+
+
+
+
See
Manual
Inp. 8-
Inp. 8+
Inp. 7-
Inp. 7+
Inp. 6-
Inp. 6+
Inp. 5-
Inp. 5+
J14
J12
J20
J21
J22
J23
K-16
K-15
K-14
K-13
K-12
K-11
K-10
K-9
K-8
K-7
K-6
K-5
K-4
K-3
K-2
K-1
Panel Bus Connection
The drawing below shows an example of a panel
bus interconnecting a BUR-200 Mimic Driver, a Fire
Alarm Control Panel BS-200M, a Repeater Panel
BS-211, and an Information Panel BV-210.
AUTRONICA FIRE AND SECURITY AS
Head office, Trondheim, Norway Tel: +47 73 58 25 00, fax: +47 73 58 25 01, e-mail: info@autronicafire.no
Oil and Gas division, Stavanger, Norway Tel: +47 51 84 09 00, fax: +47 51 84 09 99
Maritime division, Spikkestad, Norway Tel: +47 31 29 55 00, fax: +47 31 29 55 01
Visit Autronica Fire and Security AS’ website: www.autronicafire.com