BEST DEALS - Swiss Instruments Ltd

BEST DEALS 

2 0 0 7 

T H E E S S E N T I A L S 

Promotion Ends 8/31/07

TESA-HITE MAGNA 400 and 700 

• Shop-proof technology 

• Long measuring span and rugged design 

• Fully protected against: 

- Water 

- Oils 

- Dust 

IP67 Digital Electronic Calipers 

00590301 

Save Over 

25% 

• (415 mm) and (715 mm) measuring range 

• 8 µm /0.0003” accuracy 

• Automatic diameter measurement using TESA’s patented system 

for detecting culmination point 

• TESA magnetic measuring system (TESA Magna µ System Patented) 

• Compatible with TESA MICRO-HITE accessories, including measuring 

inserts and holder 

• SCS calibration certificate delivered with each instrument 

Part No EDP No. Product List Price Sale Price 

00730047 28260 Tesa Hite Magna 400 $3,056.00 $2,647.00 

00730059 28261 Tesa Hite Magna 700 $3,899.00 $3,410.00 

IP67 Compliant - 

Unrivaled protection against the penetration of liquid or 

solid contaminants. 

• Full protection from oil and coolant splashes, as well as solid particles 

• Encapsulation of the main components prevents dust, particles of metal, 

spraying liquids from entering the caliper 

• New electronic measuring system protected from liquids and immune 

to magnetic fields 

• Specifications consistent 

with DIN 862 

• Large, 1/4” LC display for 

easy reading 

• Auto shut-off after two hours 

• Instant inch/metric conversion 

• Power supply: one 3V lithium 

battery, type CR 2032 

• Battery life: approx. 1.5 years 

Catalog No. EDP No. Range Thumbwheel Range List Price Sale Price 

00530300 29726 TESA-Cal IP67 6”/150 mm $173.00 $121.00 

00590301 27679 Dura-Cal IP67 • 6”/150 mm $164.00 $121.00 

00530302 20117 TESA-Cal IP67 • 8”/200 mm $267.00 $240.00 

00530303 20118 TESA-Cal IP67 • 12”/300 mm $394.00 $355.00 

00591004 28774 Tool Set: DURA-CAL IP67+ $427.00 $384.00 

Micromaster IP54

TESA IP67 Electronic Calipers 

Brown & Sharpe Shop-Cal Digital Calipers 

Economical Swiss-made quality 

and design 

Models with rounded measuring faces 

for internal dimensions 


00530221 24724 Electronic Caliper IP67; Data output; 200 mm $374.00 $336.00 



00590090 

Save Over 

25% 

The Brown & Sharpe Shop-Cal 

provides easy-to-read, accurate 

measurements of day-to-day 

operations. Stainless steel for 

durable, reliable and accurate 

measurements. 

• Absolute Measuring System 

• Range: 0-6”/0-150 mm 

• Resolution: .0005”/0.01 mm 

• Specifications consistent with DIN 862 

• Absolute and differential measuring system 

• A large, 1/4” LC display for easy readings 

• Auto shut-off 

• Instant inch/metric conversion 

• Power supply: 3V lithium-battery, 

type CR 2032 

• Battery life: approx. 1.5 years 

Catalog No. EDP No. Range Resolution List Price Sale Price 

00590090 20971 0 - 6” / .0005” / 0.01 mm $114.00 $83.00 

0 - 150 mm 

TESA IP67 Depth Calipers 

Models with short cut measuring faces 

or fixed jaws 

INTERAPID LITE Digital Caliper 

Lightweight Aluminum 

Alloy Frame 

• Titanium Jaws (O.D.) 

• 12” to 120” Sizes 

• Patented Inductive Measuring System 

• Resolution: .0005” 

• INCH/METRIC Conversion 

• MIN/MAX and PRESET Functions 


00530242 24740 Electronic depth caliper with short 

cut measuring face; 250 mm $427.00 $384.00 

Max. 

Catalog EDP Perm. Repeat- 

No. No. Range Error ability Description List Price Sale Price 

00590061 23160 12”/330mm 30µm 20µm Interapid light 300 $1,088.00 $980.00 

00590062 23161 24”/630mm 40µm 20µm Interapid light 600 $1,380.00 $1,242.00 





00590067 23166 120”/3050mm 450µm 40µm Interapid light 3000 $4,925.00 $4,433.00

Brown & Sharpe Dial-Cal ® Dial Calipers 

World’s First & Finest! 

• Tough - Anti-Backlash, Shock-Proof Design 

• Durable - Covered Stainless Steel Rack 

• Versatile - Measures Inside, Outside, Depth & Step 

• Precise - .100”/2mm per Revolution 

• Reliable - Adjustable Zero Set and Slide Lock 

• Easy-To-Read - 1.25” Diameter Rotating Dial w/Lock 

Catalog No. EDP Description Range Jaw List Sale 

No. Length Price Price 

599-579-4 51774 6” Dial-Cal with White Face .001 1.5” $132.00 $89.00 

599-579-5 51879 6” Dial-Cal with Jet Console, .001 1.5” $132.00 $89.00 

Black Face & Orange Hand 

599-579-8-1 27594 8” Dial-Cal with White Face .001 1.9” $231.00 $139.00 

599-579-8-5-1 27593 8” Dial-Cal with Jet Console, .001 1.9” $231.00 $139.00 


599-579-12-1 27592 12” Dial-Cal with White Face .001 2.5” $275.00 $199.00 

599-579-12-5-1 27591 12” Dial-Cal with Jet Console, .001 2.5” $275.00 $199.00 


05.60013 42534 Depth Measuring Foot (6” Only) $47.00 $42.00 

05.60086 27000 Depth Measuring Foot (8” & 12”) $47.00 $42.00 

Brown & Sharpe Centerline Plus Accessory Set 

Fits all Brown & Sharpe and competitive 

6” Dial, Digital and Vernier Calipers. 

Jaw attachment slots are manufactured to .140” 

• Exclusive interchangeable centerline cones 

• Exclusive 4-48 threaded holes in accessory jaws allow 

use of any AGD Standard Point with 4-48 threads 

• Measure places impossible to reach with a regular 

caliper - undercuts, grooves, webs, and shoulders 

• Cold rolled steel, case hardened with black oxide 

plating for long life and corrosion protection 

• Permanent alignment pin for easy alignment 

• Supplied in a fitted wooden case 

Set consists of: 

(2) Jaw attachments 

(2) Stem Points 3/8” length x .055” diameter 

(2) 1/4” diameter disks 


Catalog No. EDP No. List Price Sale Price 

599-579-200 26908 $115.00 $98.00 

Up To 

40% 

OFF 


(2) 3/8” diameter 60 centerline cones 

(2) 1/2” diameter 60 centerline cones 

(4) Set screws 

(1) Hex key 

. 

External Micrometers 

Micromaster Digital 

Micrometers 

599-100 

Over 

45% 

OFF 

A sleek, ergonomic design and plenty of impressive features, including 

the new “capa µ system®”, give the Micromaster Digital Micrometer a 

comfortable advantage in both form and function. 

• Large, easy-to-read 1/4” digital display 

• Preset absolute and differential modes 

• Battery life: 1 to 2 years normal usage 

• Automatic shut-off after 10 minutes 

• Meets or exceeds applicable Federal 

and DIN standards 

• Shop-hardened, fitted case 

EDP Water RS-232 List Sale 

Catalog No. No. Range Resistant Output Price Price 

Digital Electronic Micrometers 

599-100 27266 0-1.2”/0-30mm .00016” N N $239.00 $129.00 

599-125 27271 0-1.2”/0-30mm .00016” Y N $254.00 $191.00 

599-125RS 27267 0-1.2”/0-30mm .00016” Y Y $260.00 $234.00 

599-126 27272 1-2”/25-50mm .0002” Y N $307.00 $276.00 

599-126RS 27268 1-2”/25-50mm .0002” Y Y $311.00 $280.00 

599-127 27273 2-3”/50-75mm .0002” Y N $319.00 $287.00 

599-127RS 27269 2-3”/50-75mm .0002” Y Y $323.00 $291.00 

599-128 27274 3-4”/75-100mm .0002” Y N $334.00 $301.0 

599-128RS 27270 3-4”/75-100mm .0002” Y Y $356.00 $320.00 

0-3 Inch Set 

06030029 21235 consisting of Y N $1,072.00 $965.00 

599-125, 599-126, 599-127 

Note: 4” through 12” ranges are also available.

Value-Line Micrometers - Inch 

Brown & Sharpe micrometers continue as the standard 

wherever measuring consistency is vital 

Features: 

• Satin-chrome thimble 

• Spindle lock 

• .0001” reading 

• Tungsten carbide 

tipped faces 

• Straight-line graduations. 

• Fixed/friction thimble 

• Black enamel frame 

• Meets Federal specifications 

15% 

OFF 

Catalog No. EDP No. Range Graduations List Price Sale Price 

599-1-44 25943 0 - 1 .0001 in $92.00 $78.00 

599-2-44 25944 1 - 2 .0001 in $100.00 $85.00 

599-3-44 25945 2 - 3 .0001 in $101.00 $86.00 

599-4-44 25946 3 - 4 .0001 in $105.00 $89.00 

599-5-44 25947 4 - 5 .0001 in $111.00 $94.00 

599-6-44 25948 5 - 6 .0001 in $119.00 $101.00 

Metric models also available.Standards are available separately. 

Individual wood cases are available for 1 to 4” Value-Line micrometers. 

Value-Line 

Micrometer Sets 

Inch 0-3”, 0-4” and 0-6” 

Micrometer Sets 

Each micrometer set includes a fitted 

wooden case. Micrometers in each set 

include the standard features listed. 

Catalog No. EDP No. Range List Price Sale Price 

599-181-923 25983 0 - 3 in Without Standards $379.00 $303.00 

599-181-923-1 25984 0 - 3 in With Standards $413.00 $330.00 





Metric sets also available. 

0”-12” and 6”-12” Micrometer Sets also available. 

ETALON ® 260 Micrometers 

• High precision micrometer designed 

for fast, easy reading 

• Reversible fixed/friction thimble 

SAVE 

12% 

Part No. EDP No. Range Graduations Accuracy Parallelism List Price Sale Price 

71.115899 41565 0 - 1 0.0001 2 1 $176.00 $155.00 

71.115900 41566 1 - 2 0.0001 2 1.5 $277.00 $244.00 

71.115901 41567 2 - 3 0.0001 3 1.5 $304.00 $268.00 

71.115902 41568 3 - 4 0.0001 3 1.5 $331.00 $291.00 

Etalon Metric Models 

00119046 20008 0-25mm 0.010 mm $57.00 $51.00 

00119050 20012 ETALON Basic Set 0-100mm $346.00 $311.00 

Micrometer Checking Set 

The First Complete Set! 

The Brown & Sharpe Micrometer 

Checking Set has all the necessary 

components to check the accuracy 

of your micrometers, ensuring you 

that they are performing to their 

optimum specifications 

• Set assists you in meeting Federal 

Specification GGG-C-15c for flatness and 

parallelism and conforms to MIL-STD-45662A 

• Ten-piece selection of gage blocks allows 

checking of various spindle positions over the complete micrometer range 

• Two optical flats: .500” diameter and .5125”diameter which allows checking 

anvil faces at half revolutions of the spindle for measuring flatness 

• Each set and each block is individually serialized 

• Gage blocks include certificate of calibration 

• Includes fitted wooden case 

Catalog No. EDP Number List Price Sale Price 

598-10-18 27076 $270.00 $230.00 

SAVE 

15%

Micromaster Depth Micrometer 

Micromaster Intrimik 

SAVE 

15%-20% 

• 3-key functions w/RS-232 data output 

• Non-rotating spindle 

• Hardened steel measuring foot faces: 100 x 15mm 

• Hardened steel meas. rods 3mm dia. 

• Measuring span 0-90 w/3 rods, 0-180mm w/6 rods 

SAVE 

12% 

EDP Water RS-232 List Sale 

Catalog No. No. Range Accuracy Resistant Output Price Price 

Digital Electronic Depth Micrometers 

60.30069 27460 0-3.5”/0-90mm .00016” Y Y $937.00 $825.00 

60.30070 27461 0-7”/0-180mm .00016” Y Y $1,090.00 $959.00 

IP54 compliant when RS-232 is not being used. 

Internal Analog 

Depth Gage Micrometers 

• 1/8 measuring rods 

• Friction thimble 

• Ring lock 

• Hardened precision base 

• Satin chrome finish 

• Supplied in a fitted Mahogany case 

EDP No. Base List Sale 

Catalog No. No. Range Graduation Rods Length Price Price 

599-603-123-3 25624 0-3” .001” 3 2.5” $167.00 $142.00 

599-603-143-3 25627 0-3” .001” 3 4” $188.00 $141.00 

599-603-126-3 25625 0-6” .001” 6 2.5” $202.00 $162.00 

599-603-146-3 25628 0-6” .001” 6 4” $227.00 $193.00 

Catalog No. EDP No. Range List Pric Sale Price 

599-290-35-1 27503 0.240-0.320”/6-8 mm $745.00 $656.00 

599-290-42-1 27504 0.320-0.400”/8-10 mm $745.00 $656.00 

599-290-50-1 27505 0.400-0.480”/10-12 mm $745.00 $656.00 

599-290-60-1 27506 0.430-0.550”/11-14 mm $764.00 $672.00 

599-290-70-1 27507 0.550-0.670”/14-17 mm $764.00 $672.00 

599-290-80-1 27508 0.670-0.790”/17-20 mm $764.00 $672.00 

599-290-100-1 27509 0.790-0.990”/20-25 mm $792.00 $697.00 

599-290-120-1 27510 0.990-1.18”/25-30 mm $792.00 $697.00 

599-290-140-1 27511 1.18-1.38”/30-35 mm $851.00 $749.00 

599-290-160-1 27512 1.38-1.58”/35-40 mm $861.00 $758.00 

599-290-200-1 27513 1.58-1.98”/40-50 mm $871.00 $766.00 

599-290-240-1 27514 1.98-2.36”/50-60 mm $899.00 $791.00 

599-290-280-1 27515 2.36-2.76”/60-70 mm $926.00 $815.00 

599-290-320-1 27516 2.76-3.16”/70-80 mm $940.00 $827.00 

599-290-360-1 27517 3.16-3.55”/80-90 mm $956.00 $841.00 

599-290-400-1 27518 3.55-3.95”/90-100 mm $981.00 $863.00 

599-290-420-1 27519 3.95-4.94”/100-125 mm $1,457.00 $1,282.00 

599-290-440-1 27520 4.94-5.90”/125-150 mm $1,473.00 $1,296.00 

599-290-460-1 27521 5.90-6.90”/150-175 mm $1,490.00 $1,311.00 

599-290-480-1 27522 6.90-7.88”/175-200 mm $1,530.00 $1,346.00 

599-290-500-1 27523 7.88-8.86”/200-225 mm $1,790.00 $1,575.00 

599-290-520-1 27524 8.86-9.85”/225-250 mm $1,898.00 $1,670.00 

599-290-540-1 27525 9.85-10.84”/250-275 mm $1,953.00 $1,719.00 

599-290-560-1 27526 10.84-11.80”/275-300 mm $2,007.00 $1,766.00 

10 11

Micromaster Alesometer 

SAVE 

12% 


62.90051 28418 0.2362-0.3150”/6-8 mm $968.00 $852.00 

62.90052 28419 0.3150-0.3970”/8-10 mm $968.00 $852.00 

62.90023 28420 0.3970-0.4921”/10-12.5 mm $1,091.00 $960.00 

62.90024 28421 0.4921-0.5905”/12.5-15 mm $1,091.00 $960.00 

62.90025 28422 0.5905-0.6890”/15-17.5 mm $1,091.00 $960.00 

62.90026 28423 0.6890-0.7874”/17.5-20 mm $1,091.00 $960.00 

62.90027 28424 0.7874-0.9843”/20-25 mm $1,110.00 $977.00 

62.90028 28425 0.9843-1.1811”/25-30 mm $1,110.00 $977.00 

62.90029 28426 1.1811-1.3780”/30-35 mm $1,110.00 $977.00 

62.90030 28427 1.3780-1.5748”/35-40 mm $1,110.00 $977.00 

62.90031 28428 1.5748-1.9685”/40-50 mm $1,203.00 $1,059.00 

62.90032 28429 1.9685-2.3622”/50-60 mm $1,203.00 $1,059.00 

62.90033 28430 2.3622-2.7560”/60-70 mm $1,288.00 $1,133.00 

62.90034 28431 2.7560-3.3465”/70-85 mm $1,288.00 $1,133.00 

62.90035 28432 3.3465-3.9370”/85-100 mm $1,288.00 $1,133.00 

62.90036 28433 3.9370-4.9212”/100-125 mm $1,640.00 $1,443.00 

62.90037 28434 4.9212-5.9055”/125-150 mm $1,775.00 $1,562.00 

62.90038 28435 5.9055-6.8897”/150-175 mm $1,938.00 $1,705.00 

62.90039 28436 6.8897-7.8740”/175-200 mm $2,073.00 $1,824.00 

62.90040 28437 7.8740-8.8582”/200-225 mm $2,207.00 $1,942.00 

62.90041 28438 8.8582-9.8425”/225-250 mm $2,342.00 $2,061.00 

62.90042 28439 9.8425-10.8267”/250-275 mm $2,476.00 $2,179.00 

62.90043 28440 10.8267-11.8110”/275-300 mm $2,610.00 $2,297.00 

INTRIMIK Internal Micrometers 

with Analog Indication (Inch Models) 

Features: 

• Intrimik measuring arms move at right 

angles to the spindle 

• Analog reading, with graduations as shown 

in the table 

• Instruments in the range .275” to 4.00” 

have hardened steel 

measuring points (770 HV) 

• Instruments in the range 4.00” to 

12.00” have tungsten carbide 

inserts in the measuring points (1300 HV) 

SAVE 

12% 

Measuring Depth (in.) 

Smallest with Extensions 

Catalog No. EDP No. Range Division None One Two List Price Sale Price 

599-281-3 43972 .275 to .350 .0001 2 6 10 $464.00 $408.00 

599-281-4 43974 .350 to .425 .0001 2 6 10 $466.00 $410.00 

599-281-5 43976 .425 to .500 .0001 2 6 10 $469.00 $413.00 

599-281-6 43978 .500 to .600 .0002 3 9 15 $494.00 $435.00 

599-281-7 43980 .600 to .700 .0002 3 9 15 $480.00 $422.00 

599-281-8 43982 .700 to .800 .0002 3 9 15 $492.00 $433.00 

599-281-10 43984 .800 to 1.000 .0002 3 9 15 $525.00 $462.00 

599-281-12 43986 1.000 to 1.200 .0002 3 9 15 $531.00 $467.00 

599-281-14 43988 1.200 to 1.400 .0002 3 9 15 $540.00 $475.00 

599-281-16 43990 1.400 to 1.600 .0002 3 9 15 $547.00 $481.00 

599-281-20 43992 1.600 to 2.000 .0002 3 9 15 $622.00 $547.00 

599-281-24 43994 2.000 to 2.400 .0002 3 9 15 $633.00 $557.00 

599-281-28 43996 2.400 to 2.800 .0002 3 9 15 $660.00 $581.00 

599-281-32 43998 2.800 to 3.200 .0002 3 9 15 $671.00 $590.00 

599-281-36 44000 3.200 to 3.600 .0002 3 9 15 $684.00 $602.00 

599-281-40 44002 3.600 to 4.000 .0002 3 9 15 $698.00 $614.00 

00882701 27011 4.000 to 5.000 .0005 4 10 $1,072.00 $943.00 

00882702 27012 5.000 to 6.000 .0005 4 10 $1,105.00 $972.00 

00882703 20221 6.000 to 7.000 .0005 4 10 $1,134.00 $998.00 

00882704 20222 7.000 to 8.000 .0005 4 10 $1,167.00 $1,027.00 

00883201 * 20223 8.000 to 9.000 .0005 4 10 $1,522.00 $1,339.00 

00883202 * 20224 9.000 to 10.00 .0005 4 10 $1,572.00 $1,383.00 

00883203 * 20225 10.00 to 11.00 .0005 4 10 $1,622.00 $1,427.00 

00883204 * 20226 11.00 to 12.00 .0005 4 10 $1,678.00 $1,477.00 

* Comes with 6” extension in finished wooden case. 

Full sets 


00880100 20214 .275 - .500” $1,436.00 $1,264.00 

00880400 20215 .500 - .800” $1,572.00 $1,383.00 

00881200 20216 .800 - 1.600” $2,332.00 $2,052.00 

00881900 20217 1.600 - 4.000” $4,293.00 $3,778.00 

00882700 20218 4.000 - 8.000” $5,713.00 $5,027.00 

12 13

Rinseable Bore Gage 

Eliminate time spent cleaning bore gages. 

The rinseable bore gage from Standard Gage can be 

cleaned without disassembly. The plunger mechanism 

is completely immersible, making it as easy to clean as 

it is to use. 

• Balanced and lightweight for greater sensitivity and 

less operator fatigue 

• Excellent stability in holding mastered value 

• Tungsten carbide contacts 

• Measuring range: 2 in - 8 in / 50 mm - 200 mm 

• Dial Indicator is shock-proof, and is available in a choice of 

graduations. The mechanism is protected by a cast housing 

• Up to 36 in extensions available 

• Supplied in black carrying case 


B3-12509 87618 .0001 in $1,348.00 $1,213.00 

B3-14509 87621 .0005 in $1,339.00 $1,205.00 

B3-17509 87620 .005 mm $1,339.00 $1,205.00 

B3-18509 87619 .002 mm $1,515.00 $1,363.00 

10% 

OFF 

TESA VERIBOR Light Bore Gauge 

Perform 2-point measurements on bores from .70” to 

5.90” using the VERIOBOR Light. Detect form and shape 

deviations. Virtually clearance free circular articulation 

ensures high repeatability. Invar stall shaft prevents hand 

warmth transfer from affecting the measured result. 

Centering shoe assures the correct alignment of the gage into the 

bore being inspected. Hardened steel ball tips offer high resistance 

to wear. 

05790090 05790091 

ETALON PISTOL GRIP Bore Gages 

Self-aligning and self-centering bore gages with 3-line contact – 

All ROCH ALESOTEST are designed for measuring not only blind 

bores, but also through bores, as well as short centering shoulders, 

except for the models covering the application ranges from 

.236 in - 3.936 in / 6 to 10 mm. 

• Built for strength, these bore gages 

are ideally suited for part series 

inspection on the production floor 

• ROCH ALESOTEST are used in conjunction with a 

value sensor (must be ordered separately). 

Use of a mechanical or electronic dial gage 

or axial probe is recommended. Supplied with 3/8” Collett 

05790092 05790093 

Part No EDP No. Product Range List Price Sale Price 

05790090 29457 Veribor Light 0.70”-1.4” $404.00 $364.00 

05790091 29458 Veribor Light 1.4”-2.5” $394.00 $355.00 

05790092 29459 Veribor Light 2.00”-6.00” $454.00 $409.00 

05790093 29479 Veribor Light 0.70”-6.00” $770.00 $693.00 

Dial indicator sold separately 


62.90080 28931 .236-.394 / 6-10 $1,609.00 $1,448.00 

62.90081 28932 .394-.787 / 10-20 $2,406.00 $2,165.00 

62.90082 28933 .787-1.575 / 20-40 $2,762.00 $2,486.00 

62.90083 28934 1.575-2.756 / 40-70 $2,904.00 $2,614.00 

62.90084 28935 2.756-3.936 / 70-100 $3,115.00 $2,803.00 

14 15

Standard Gage Indicators 

SAVE 

25% 

AGD 2 Indicators 

2-1/4” Diameter Dial 

The AGD 2 series of dial indicators 

are the most popular indicators in the 

Brown & Sharpe range. All models are 

supplied with a revolution counter, 

tolerance pointers, central lug back 

and ball contact tip as standard. 

Alternative flat and slide backs are 

available as accessories. 

D1-23226A 

D1-21221F 

D1-20261A 

10% 

OFF 

Catalog EDP 

No. No. Series Travel per rev. List Price Sale Price 

14.82022 26862 MW216 0.10in $90.00 $81.00 

14.82023 26863 MB216 0.10in $90.00 $81.00 

The industry’s most popular AGD indicator sizes 

Catalog EDP AGD Dial Dial List Sale 

No. No. Group Range Reading Diam Marking Price Price 

Regular Models 

D1-20141A 33638 1 .025” .0001” 1.75 0-5-0 $250.00 $187.00 

D1-20241A 33836 2 .025” .0001” 2.25 0-5-0 $202.00 $152.00 

D1-20126A 33611 1 .075” .0005” 1.75 0-15-0 $273.00 $205.00 

D1-20226A 33786 2 .075” .0005” 2.25 0-15-0 $165.00 $124.00 

D1-20111A 33557 1 .250” .001” 1.75 0-50-0 $240.00 $180.00 

D1-20211A 33705 2 .250” .001” 2.25 0-50-0 $240.00 $180.00 

Long-Range Indicators 

D5-21221F 86002 2 1.00” .0005” 2.25 0-50 $163.00 $122.00 

1-Rev Indicators 

D1-23226A 86006 2 .020” .0005” 2.25 0-10-0 $273.00 $205.00 

D1-23241A 34018 2 .008” .0001” 2.25 0-4-0 $215.00 $161.00 

Metric Indicators 

D1-20261A 33857 2 2.5mm 0.01 mm 2.25 0-50-0 $232.00 $174.00 

D1-20281A 33886 2 0.5mm 0.002 mm 2.25 0-10-0 $202.00 $151.00 

Standard Gage IP54 

Indicators 

IP54 – Waterproof protection 

(Norm IEC 60529) 

Fully protected against the penetration 

of liquid or solid contaminants. 

Dust, particles of metal, spraying water 

or oil are prevented from entering the 

indicator. 

• Corrosion resistant 

• High performance, shock-proof design 

• Hardened steel contact point 

• Vertical centered lug back 

• Balanced dial reading 

• Revolution counter 

• Tolerance pointers 

Catalog No. EDP No. Range Markimg List Price Sale Price 

D2-29111F-W 28629 .100 in 0-50-0 $325.00 $293.00 

D2-29228F-W 28630 .050 in 0-25-0 $325.00 $293.00 

16 17

INTERAPID Dial Test Indicators 

• Magnetic resistant 

• Two-way action – no reversing lever 

• Dovetail and adjustable stem adaption 

• Carbide contact point swivels 210° 

• Extremely low measuring pressure 

• Ball bearing and jewelled movement 

• Precise repetitive readings 

• Easy-to-read tilted dial 

• With revolution counter 

SAVE 

12% 

20-25% 

OFF 

BESTEST Dial Test Indicators 

- Black Face Models with Orange Hand 

Easy-to-read, satin black, “jet-console” face BesTest ® Indicators with 

high visibility orange hand. Each BesTest ® Indicator set comes complete 

with one carbide tip contact point, .080” diameter; one 1/2” long x 

.250” diameter extension with dovetail; one contact point wrench; one 

durable molded case and certifcate of accuracy and traceability. 

FREE 

With 

Purchase 

2 Brown & Sharpe 

Ball Contact Points 

An $88.00 Value 

Send proof of purchase to 

Brown & Sharpe, Inc. 

TESA Division 

“Free Contact Points Program” 

250 Circuit Dr., N. Kingstown, RI 

02852-1700 

• Easy-to-read “jet-console” face 

w/high visibility orange hand 

• Constant clockwise rotation 

• Automatic reversal 

• Swivelling point 

• Carbide tip point 

• Universal mounting 

• Monoblock (Precision Watch) 

body design 

• Anti-magnetic and corrosion 

resistant 

• Includes fitted case 

Catalog EDP Smallest Dial Point Tip List Sale 

No. No. Range Marking Division Dia. Length Dia. Price Price 

599-7029-5 51732 .030” 0-15-0 .001” 1” 1/2” .080” $141.00 $113.00 

599-7030-5 51733 .030” 0-15-0 .0005” 1” 1/2” .080” $143.00 $114.00 

599-7031-5 51734 .030” 0-15-0 .0005” 1-1/2” 1/2” .080” $159.00 $119.00 

599-7032-5 51737 .008” 0-4-0 .0001” 1” 1/2” .080” $192.00 $144.00 

599-7033-5 51738 .008” 0-4-0 .00005” 1-1/2” 1/2” .080” $203.00 $152.00 

599-7034-5 51735 .020” 0-10-0 .0005” 1” 1-7/16” .080” $178.00 $134.00 

599-7035-5 51736 .020” 0-10-0 .0005” 1-1/2” 1-7/16” .080” $195.00 $146.00 

EDP Dial Dial List Sale 

Catalog No. No. Series Range Grad. Dia. Reading Price Price 

Vertical Models 

74.111377 41685 312b-1V .060” .0005” 1.5” 0-15-0 $237.00 $209.00 

74.111378 41686 312b-2V .060” .0005” 1.0” 0-15-0 $231.00 $203.00 

74.111379 41687 312b-20V .060” .001” 1.0” 0-15-0 $215.00 $189.00 

74.111957 41714 312b-3V .016” .0001” 1.5” 0-4-0 $287.00 $253.00 

74.111958 41715 312b-15V .060” .0005” 1.5” 0-15-0 $305.00 $268.00 

Horizontal Models — for measurement at 12° 

74.111370 42775 312b-1 .060” .0005” 1.5” 0-15-0 $220.00 $194.00 

74.111371 86150 312b-2 .060” .0005” 1.0” 0-15-0 $218.00 $192.00 

74.111372 41680 312b-3 .016” .0001” 1.5” 0-4-0 $274.00 $241.00 

74.111373 41681 312b-4 .016” .0001” 1.5” 0-4-0 $271.00 $238.00 

74.111374 41682 312b-20 .060” .001” 1.0” 0-15-0 $215.00 $189.00 

74.111965 41716 312b-15 .060” .0005” 1.5” 0-15-0 $304.00 $268.00 

Metric Model 

74.111375 41683 312-1V 0.01mm 1,6mm 37.5mm 0-40-0 $237.00 $209.00 

INTERAPID Dial Test Indicator 

Contact Points and Accessories 

Contact Points — 

Catalog No. EDP No. Tip Dia.Length List Price Sale Price 

74.105996 41647 .080” 11/16” $17.30 $15.00 

74.105997 41648 .060” 11/16” $17.30 $15.00 

74.105998 41649 .031” 11/16” $17.30 $15.00 

74.111492 41698 .080” 1-3/4” $31.00 $27.00 

74.111493 41699 .031” 1-3/4” $31.00 $27.00 

74.111912 41712 .100” 2-3/4” $23.00 $20.00 

74.111913 41713 .080” 2-3/4” $23.00 $20.00 

Accessories — 

Catalog No. EDP No. Description List Price Sale Price 

74.106331 41651 Height Gage Bar $50.00 $44.00 

74.106353 86268 Holding Pin $12.00 $10.00 

74.106931 41656 Axial Support (Inch) $54.00 $48.00 

74.108603 41663 Universal Clamp $31.00 $27.00 

18 19

Featuring articulating arm and dovetail clamp with fine adjustment, 

these bases provide precise setting of gage, widely used 

for high accuracy measuring with high resolution indicators and electronic 

gages. Measuring force 400, V diameter 1.18”-5.9”. 

016390030 

INTERAPID ® Magnetic Bases 

01690031 016390032 016390033 

Ultra Thin Parallel Set 

Set of 10 pairs. Supplied in custom 

molded case 

• Made from high-grade alloy steel, hardened 

and ground from 1/32” stock with 

2 holes in each parallel 

• 10 pairs, 6” length, 1/32” width 

• 1/2”, 5/8”, 3/4”, 7/8”, 1”, 1-1/8”, 

1-1/4”, 1-3/8”, 1-1/2”, 1-5/8” 

• Height specifications relate to consistency within 

each pair. Absolute heights are nominal 

Base Assembly Articulating Arm 

Part No. EDP No. L W H Demensions (H & L) List Price Sale Price 

01690030 29432 2.36” 1.97” 2.17” H=12.2” (310mm) L=4.7” (119.38mm) $225.00 $203.00 

01690031 29433 2.36” 1.97” 2.17” H=15.36” (390mm) L=11” (280mm) $251.00 $226.00 

01690032 29434 2.36” 1.97” 2.17” H=14.3” (363mm) L=11” (280mm) $319.00 $288.00 

01690033 29435 1.18” 1.18” 1.18” H=8.07” (205mm) L=7.9” (200.66mm) $382.00 $344.00 

Medium Size Magnetic Bases 

Series 7746 MAGNICATOR® 


599-7746 44908 Magnicator with 

fixed upright $147.00 $118.00 

Small Size Magnetic Bases 

MITI-MITE Series 

Catalog No. EDP No. Description Size Post Type List Price Sale Price 

599-7761 44915 Medium Duty 1.25 x 1.25 Ball & 

with Fine Adjust x 1.75 Socket $82.00 $66.00 

20% 

OFF 

Catalog No. EDP No. Length List Price Sale Price 

599-921-20 26884 1/32”W x 6”L $145.00 $116.00 

Ultra Precision Parallel Set 

Set of 10 pairs. Supplied in custom 

molded case 

• Made from high-grade alloy steel, hardened 

and ground from 1/8” stock with 2 holes in 

each parallel 


• 1/2”, 5/8”, 3/4”, 7/8”, 1”, 1-1/8”, 1-1/4”, 

1-3/8”, 1-1/2”, 1-5/8” 

• Height specifications relate to consistency 

within each pair. Absolute heights are nominal 


599-921-10 86615 1/8”W x 6”L $263.00 $210.00 

Steel Parallel Set 

Set of 9 pairs. Supplied in custom molded case 

• Made from high-grade alloy steel, hardened and ground 

from 1/4” stock with 2 holes in each parallel 


• 3/4”, 7/8”, 1”, 1-1/8”, 1-1/4”, 1-3/8”, 1-1/2”, 

1-5/8”, 1-3/4” 

• Height specifications relate to consistency within each pair 


599-921-4 26882 1/4”W x 6”L $316.00 $253.00 

20 21

Universal 1-2-3 Block Set 

Universal 1-2-3 Blocks Set Consisting of a matched 

pair of 1”x 2” x 3” blocks, five plated 5/16-18 

socket head cap screws and a hex key wrench. 

• “Shop-hardened” molded case 

• Each block is precision ground and case 

hardened on all 6 surfaces 

• Surface finish 6 to 16 microinches 

• Squareness on all sides to .0001” 

• There are a total of 11 holes on three faces 

Five 5/16 - 18 tapped holes arranged for holding down and for conversion to 

an angle plate. Six holes drilled through with deep recesses for easy clamping 

• Blocks are oversized to allow for normal lapping to .0003” 


599-750-50 27396 $84.00 $62.00 

Tapped Holes 

Adjustable Parallel Sets 

Used for checking, marking, 

or positioning work. 

Ultra Precision Ground 

1-2-3 Blocks Set 

• Handy gages for measuring inside dimensions 

of recesses or slots, or for setting tools 

• Clamp screws lock parallels to size 

Supplied in custom molded case. Ideal for precision 

layout and setup. 

• Each block is ground and case hardened on all six surfaces 

• Surface finish 6 to 16 microinches 

• Squareness on all sides to .0001” 

• 23 holes: 5 tapped 3/8-16 

• Oversized to allow for normal tapping .0001” - .0003” 

• Case hardened to 50-60 HRC 

• Set consists of a pair of 1x2x3 inch blocks, five 3/8-16 

stainless steel socket head cap screws and a hex key wrench 


599-750-10 26764 $71.00 $53.00 

Catalog EDP 

No. No. Range No. of Parallels List Price Sale Price 

599-673-10 44515 3/8” to 1-5/16” 4 $98.00 $74.00 

599-673-20 44516 3/8” to 2-1/4” 6 $144.00 $108.00 

Up To 

26% 

OFF 

Ultra Precision Wavy Parallel Set 

Ultra Precision Wavy Parallel Set reliable and 

precise vertical positioning of workpieces. 

• Parallel within ±.0002” — paired ±.0002” 

• Made of high quality spring steel, hardened, stress 

relieved and precision ground 

• Includes 9 pairs 4-1/4” in length, with the following 

heights: 1/2”, 5/8”, 3/4”, 7/8”, 1”,1-1/8”, 1-1/4”, 1-3/8”, 1-1/2” 

• Shims can be compressed, which is useful in the holding thin parts 

• Complete with fitted wooden case 


599-921-25 27279 $142.00 $107.00 


599-921-18 26883 $208.00 $156.00 

Workshop Square Set 

Complete in a shop-hardened, 

protective molded case! 

• Squareness of the blade edge to the 

working face of stock is .0006” 

Ultra Precision 12-Piece 

Angle Block Set 

Complete with a protective 

“shop-hardened” molded case. 

• Precision ground hardened steel 

• Angular accuracy .0001” per inch, 

± 30 arc seconds 

• 3” long x 1/4” thick 

• Simple, quick angle setups 

• Eliminate calculations and avoid errors 

• Complete set of 12 blocks: 1/4°, 1/2°, 

1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30° 

Catalog No. EDP No. Description Blades List Price Sale Price 

599-540-246 27061 3-Pc. Square Set 2”, 4”, & 6” $70.00 $53.00 

599-540-2346 27060 4-Pc. Square Set 2”, 3”, 4”, & 6” $87.00 $65.00 

Save 

25% 

22 23

Jack Screw Utility Set 

Complete in a shop-hardened, 

protective molded case 

Use the Jack Screw Utility Set when you are 

setting up machinery and in other machine 

shop applications. 

Perfect for leveling work on planer beds 

and upright drills. 


599-680 27421 $29.00 $22.00 

Edge Finders & Audible Edge Finders 

Audible Edge Finders help assure accuracy by releasing 

an audible click when the tip jumps. This allows the operator 

to listen as well as watch the tool. 

• Available in three sizes: 1/2”, 3/8”, and 10mm 

• Hardened and ground on all working surfaces 

Save 

Over 

20% 

Catalog No. 

Edge Finders EDP No. End Size List Price Sale Price 

599-792-2 27030 S 3/8” x .200” $11.90 $9.00 

599-792-3 27031 S 1/2” x .200” $12.70 $10.00 

599-792-4 27032 D 3/8” x .200” $15.90 $12.00 

599-792-5 27033 D 1/2” x .200” $16.40 $12.00 

599-792-11 27036 S 10mm x .375 x 10mm $14.20 $11.00 

599-792-12 27037 S 10mm x 10mm $14.20 $11.00 

599-792 44595 S 1/2” x .500” $12.70 $10.00 

Audible Edge Finders 

599-792-20 27038 S 3/8” x .200” $14.20 $11.00 

599-792-21 27039 S 1/2” x .200” $15.00 $11.00 

599-792-22 27040 S 10mm x .375” x 10mm $16.40 $12.00 

599-792-23 27041 S 10mm x 10mm $16.40 $12.00 

599-792-24 27042 S 1/2” x .500” $15.00 $11.00 

Edge Finder Set 

599-792-9 28447 1/4”, 3/8”, 1/2”, 3/4” $53.00 $45.00 

Audible Edge Finder Set 

599-792-19 28448 1/4”, 3/8”, 1/2”, 3/4” $62.00 $53.00 

Telescoping Hole Gages 

Telescoping Hole Gages 

Satin-chrome finish 

Completely assembled with handle. 

Knurled lock maintains the setting 

of the measuring arms to permit 

sizing with a micrometer or caliper. 

4 Piece Set: 

• Range: 5/16” to 2-1/8” diameter 

6 Piece Set: 

• Range: 5/16” to 6” diameter 

Catalog No. EDP No. Description Range List Price Sale Price 

599-591-10 45368 4 Piece Set 5/16” to 2-1/8” dia. $98.00 $74.00 

599-591-20 45369 6 Piece Set 5/16” to 6” dia. $129.00 $97.00 

Sine Bar Riser Kit and Value-Line 5” 

Quickly measure the desired angle 

in a machine setup 

Sine Bar: 

• 5”, hardened and precision ground 

• 1” body size, top parallel to bottom 

of rods within .0002” 

Risers: 

• 18 risers from 1/2° to 15°, 1/4° 

and 1/2° T.P.F. 

• Exact constant within .0001 

Save 

Up To 

25% 


598-291-600 27264 Sine Bar Riser Kit $171.00 $128.00 

598-291-500 29686 5” Sine Bar (only) $52.00 $38.00 

24 25

Titanium Plated Square Set 

• 12” blade length, 4R graduation 

• Tin Coated for extra wear resistance 

• Complete with plastic blow molded 

storage case 

Over 

15% 

OFF 

TESA Spacer 100/200 

• Easy-to-use, pocket-size laser gage for 

• Shortcut keys for addition, subtraction, 

and volume calculations 

• Measure both highest and 

lowest distance values 

Leica Disto 

The Original Laser 

Distance Meter 

distances. 

surface 

Catalog No. EDP No. Blade Size List Price Sale Price 

599-401-1204T 27417 12”/4R Grad. $108.00 $89.00 

Combination Square Sets 

Industry’s most versatile tool 

Combination squares are commonly 

used for layout, setup, checking 

heights and depths and setting 

angles. They are also often 

used as try squares, center 

gages, bevel protractors 

and rules. 

• Square heads and 

protractors are supplied with levels 

• Square heads also include a hardened steel scriber 

• Square heads and center heads are made from hardened steel 

• Inch, metric or inch/metric reading combination squares 

are available 

Components may be purchased separately. 

25% 

OFF 

EDP Blade List Sale 

Catalog No. No. Size Includes Price Price 

599-400-1204-1* 44159 12” Square Head (Hardened) $134.00 $101.00 

Center Head (Hardened) 

599-438-1204-1* 44193 12” Square Head (Hardened) $213.00 $160.00 

Center Head (Hardened) 

Protractor (Reversible) 

Satin Chrome Blade. 

All blades graduated in, 8ths, 16ths, 32nds, and 64ths. 

Spacer 100 Spacer 200 Leica Disto 

Accuracy 1/8” 3/32” 1/16” 

Maximum Distance 350 Feet 650 Feet 650 Feet 

Viewfinder No Yes Yes 

Add and Subtract 

Measurements Yes Yes Yes 

Pocket Sized Yes No No 

Timer Function No Yes Yes 

Backlit Display Yes Yes Yes 

Tripod Mount No Yes Yes 

Catalog EDP Description List Sale 

No. No. Price Price 

01130010 24721 TESA SPACER 100 $399.00 $360.00 

01130020 24722 TESA SPACER 200 $521.00 $470.00 

01130025 28504 LEICA DISTO A6 $819.00 $738.00 

26 27

Order Yours Today! 

The New Advanced Metrology Products Brochure 

(Order number PMI-917) 

World Headquarters 

250 Circuit Dr., North Kingstown, RI 02852-1700 

Tel: (800) 283-3600 Select option 3, then option 2 

Fax: (401) 886-2553 

www.brownandsharpe.com 

PMI-916 2/07

BEST DEALS - Swiss Instruments Ltd

Create successful ePaper yourself

Delete template?

Save as template?