flat top Semi trailer - SX Trailers

www.freighter.com.au
®
Flat Top Semi Trailer
Range of Sizes • Custom Manufacturing • Range of Options
The Freighter Flat Top Semi-Trailer may be purchased as a
tailored, stand alone trailer or in tag specification to use with
an existing lead trailer for maximum payload flexibility.
The Freighter Flat Top Semi-Trailer is available either as a
22 pallet or 24 pallet trailer and features a chequer-plate steel
floor. Freighter offers optional aluminium flooring which can
further reduce tare weight by around 530kg on a 45ft trailer,
optimizing payload capability.
In fact, the integrity of Freighter engineering allows for
minimum tare weight and maximum payload with advanced
styling and component design giving you the quality
appearance and performance you have come to expect
from Freighter.
Painted with high quality two-pack-paint applied over grit
blasted and primed steel, the Freighter Flat Top Semi-Trailer
trailer will retain its excellent appearance with regular
maintenance.
Optional components include twist locks in the floor, allowing
the carrying of a shipping container.
Importantly, your Freighter dealer can ensure that your
truck and B-Double combination meets legal dimensional
requirements while maximising your payload.
Providing customised, high-quality transport solutions since
1946, only Freighter gives you the full customer service and
ongoing support you truly deserve!
®

www.freighter.com.au
Flat Top Semi Trailer
Dimensions (nominal)
Unit Specifications (nominal)
Dimensions
Underbody
Length
13,730mm (45ft) / 14,630mm (48ft)
Toolbox
1 standard – Kerbside
Skidplate Height
1,270mm
Tyre Carrier
1 standard – 2 Wheel
Kingpin Location
1,430mm from front
Load Restraint
Suspension Location
9,500mm from kingpin
Tie Rails
25mm NB Pipe both sides
Frame
Coaming Pockets
To suit 6 gates per side
Bumper
Square
Electrical
Skidplate
8mm with 50mm bolt-in kingpin
Voltage
Multi-volt to ADR/1300
Base Frame
1,040mm mainrail centres
Lamps
LED Multi-volt
12mm top flange / 16mm bottom flange
Landing Gear
Floor
3mm steel chequerplate – fully welded
Rocker foot – 2 speed Maxus
Coaming
100 x 45 TFB (Raised 23mm)
Paint
Suspension
1 Colour 2k Coamings, toolbox and hubs
Meritor CS9
Axles
Underside
Mudguards
Silver
Meritor
Extruded aluminium splashguards with sprayguard flaps fitted to rear of suspension group
Brakes
420mm x 178mm (16.5” x 7”) S’Cam to ADR/3803
Key Features (Photographs may show equipment that is available at additional cost.)
Toolbox – Made using highest quality
components and available in a range of sizes
to suit individual requirements.
Superior Chassis Design – Developed through
a computer-aided design process, Freighter’s
chassis delivers optimum strength and durability
for long life in Australia’s harsh road conditions.
Finish – Use of highest quality components
and custom manufacturing delivers special
customised configurations for individual
requirements.
MaxiTRANS Victoria (03) 8368 1111
Mildura Truck Centre Sunraysia (03) 5051 2800
SX Trailers NSW (02) 9755 3333
CMV Trailer Sales SA (08) 8139 4000
Freighter Maxi-CUBE QLD (07) 3277 5511
MaxiTRANS WA (08) 6278 2604
Western Diesel NT (08) 8935 9100
MaxiTRANS NZ (09) 269 0712
MaxiTRANS provides the information contained herein in good faith, based upon the right to change specifications without notice. However, MaxiTRANS accepts no liability, either direct or indirect for any loss or consequential
loss that may result from the application of this information. Purchasers must conduct their own enquiries to ensure that the products are suitable for their own particular purposes. Any comments made regarding products and
construction are made on an information basis, not as a recommendation. Photographs may show equipment that is available at extra cost. Freighter is a registered trademark of the MaxiTRANS Group. MaxiTRANS Australia Pty Ltd.
Copyright 2010. ABN 95 081 151 699. Printed 09/10.
®