International Fire Code - Texas Association of Homes and Services ...

More documents

Recommendations

Info

1. Wood Studs — Nom 2 by 4 in., spaced 24 in. OC, effectively fire stopped. 2. Gypsum Board* — 5/8 in. thick, 24 to 54 in. wide. Gypsum boards nailed to studs and bearing plates 7 in. OC with 6d cement coated nails 1-7/8 in. long, 0.0915 in. shank diam and 1/4 in. diam head. When used in widths other than 48 in., gypsum panels to be installed horizontally. CGC INC — Types AR, IP-AR, IP-X1, SCX, SHX, ULX, WRX. UNITED STATES GYPSUM CO — Type AR, FRX-G, IP-AR, IP-X1, SCX, SHX, ULX or WRX. USG MEXICO S A DE C V — Type AR, IP-AR, IP-X1, SCX, SHX, ULX, WRX. *Bearing the UL Classification Mark
A Short Introduction To UL Fire Rated Assemblies, Roof-Ceiling Design No. P531 BXUV.P531 Fire Resistance Ratings - ANSI/UL 263
Page 1 and 2: Keeping All Communities Safe: Life
Page 3 and 4: Introduction Larry Beauvais joined
Page 5 and 6: © 2012 EK Life Safety Consulting,
Page 7 and 8: HUD Requirements: Code of Federal R
Page 9 and 10: Comparison of Occupancy Requirement
Page 11 and 12: What Is The National Fire Protectio
Page 13 and 14: Life Safety Compliance Is More Than
Page 15 and 16: “Countdown to Disaster” This vi
Page 17 and 18: I. Construction Type
Page 19 and 20: Wood Construction
Page 21 and 22: Concrete Construction
Page 23 and 24: Evacuation Capability • Prompt -
Page 29: A Short Introduction To UL Fire Rat
Page 33 and 34: NAILOR INDUSTRIES INC ― Types 075
Page 35: Design/System/Construction/Assembly
Page 40 and 41: Again, Properly Sealed Barriers Wor
Page 54 and 55: • Fire Alarm sound and light devi
Page 56 and 57: “Fire Power” Look for the follo
Page 58 and 59: • Both the Life Safety Code and t
Page 60 and 61: For sprinkler heads to be effective
Page 76 and 77: Summary • All buildings are requi
Page 78 and 79: Summary • Building construction t
Page 80:
© 2012 EK Life Safety Consulting,
show all

International Fire Code - Texas Association of Homes and Services ...

Create successful ePaper yourself

Delete template?

Save as template?