Untitled - TCP Global
Untitled - TCP Global
Untitled - TCP Global
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DESCRIPTION<br />
I Iml<br />
Tech Sheet - Custom Shop UBC-LV 3.5 vac Compliant<br />
Tech Sheet - Custom Shop UBC-LV 3.5 vac Compliant<br />
[[I Custom Shop USC-LV Low VOC Urethane Sasecoat<br />
Custom Shop UBC-LV Urethane Basecoat is astate-ofthe-art,<br />
basecoatlclearcoat Low system VOC Urethane designed Sasecoat to<br />
DESCRIPTION<br />
reproduce the Custom hi-tech Shop O.E.M. UBC-LV finishes Urethane found Basecoat on is today's a ~state-ofthe-art,<br />
outstanding Custom basecoat/clearcoat coverage, Shop system USC-LV<br />
rapid designed dry time, to<br />
vehicles. It features<br />
excellent reproduce metallic the control hi-tech and O.E.M optimum . finishes repairability. found on today's<br />
UBC-LV vehicles. provides It features an environmental outstanding friendly coverage, solvent rapid solution. dry time,<br />
excellent metallic control and optimum repairability.<br />
COMPONENTS<br />
UBC-LV provides an environmental friendly solvent solution.<br />
COMPONENTS<br />
IrA I I<br />
. U BC-L V Low VOC Base Coat<br />
For 3.5 VOC Must Use XR Series Reducer<br />
L-lJ<br />
~ • I XR60 . U BC-L Fast V Low Reducer VOC Base - Up to Coat 55-70 F (24 C)<br />
L-lJ<br />
• XR70 For 3.5 Medium VOC Must Reducer Use -XR 70-85 Series F (24 Reducer C - 32 C)<br />
• XR60 Fast Reducer - Up to 55-70 F (24 C)<br />
• XR85 Slow Reducer- 85 F and Above<br />
For • National XR70 Medium Rule VOC Reducer May use - 70-85 KR Series F (24 C Reducers - 32 C)<br />
KR60, • XR85 KR70, Slow KR85 Reducer- or UR60, 85 UR70, F and and Above UR85<br />
For National Rule VOC May use KR Series Reducers<br />
KR60, KR70, KR85 or UR60, UR70, and UR85<br />
When Properly Covered at 77'F / 25'C UBC-LV Basecoat will maintain a sprayable viscosity indefinently.<br />
With KH211 or KH212: 2 Hours<br />
When Properly Covered at 77'F / 25'C UBC-LV Basecoat<br />
will maintain a sprayable viscosity indefinently.<br />
MIXING RATIO<br />
With KH211 or KH212: 2 Hours<br />
Mixing Ratios: 2: 1 2 Parts UBLV Color -1 Part XR, KR, or UR Reducer<br />
I75l MIXING RATIO<br />
Mix One Part Base Color with One Half Part Reducer (2-1 By Volume).<br />
I75l Mixing Ratios: 2: 1 2 Parts UBLV Color -1 Part XR, KR, or UR Reducer<br />
Optional: Add 1% Max. of KH211 or KH212 Activator per Sprayable Quart for Enhanced Performance.<br />
~ Mix One Part Base Color with One Half Part Reducer (2-1 By Volume).<br />
CLEAN UP Optional: Add 1% Max. of KH211 or KH212 Activator per Sprayable Quart for Enhanced Performance.<br />
CLEAN KT-025 UP Compliant Solvent Cleaner<br />
KT-025 Compliant Solvent Cleaner<br />
SUBSTRATES<br />
r=l UBC-LV Series Urethane Basecoat may be applied over: Cleaned, sanded and primed OEM or<br />
Refinish topcoat. Kustom Shop KEP Epoxy Primer / Sealer. Kustom Shop KUP Urethane Primer.<br />
SUBSTRATES<br />
r=1UBC-LV Series Urethane Basecoat may be applied over: Cleaned, sanded and primed OEM or<br />
Kustom Shop KFP Hi-Build 2K Primer Surfacer Kustom Shop KPP Polyester Primer, Kustom Shop<br />
~ Refinish topcoat. Kustom Shop KEP Epoxy Primer / Sealer. Kustom Shop KUP Urethane Primer.<br />
KL611 Old school Acrylic Lacquer Primer. Restoration Shop RP 21 00 High Solids Urethane Primer.<br />
Kustom Shop KFP Hi-Build 2K Surfacer Kustom Shop KPP Polyester Primer, Kustom Shop<br />
•<br />
KL611<br />
Epoxy Primer<br />
Old school Acrylic Lacquer Primer. Restoration Shop RP2100 High Solids Urethane Primer.<br />
•<br />
•<br />
Properly<br />
Epoxy<br />
Prepared<br />
Primer<br />
OEM Surface<br />
•<br />
•<br />
Properly<br />
Properly<br />
Prepared<br />
Prepared<br />
Aluminum<br />
OEM Surface<br />
and Steel.<br />
• Note: Properly Do Not Prepared Apply Over Aluminum Self Etching and Steel. Primer<br />
Note: Do Not Apply Over Self Etching Primer<br />
SURFACE USE RECOMMENDED PREPARATION UNDERCOAT SYSTEM FOLLOWING RECOMMENDED PROCEDURES.<br />
USE Wipe RECOMMENDED with KW901 Grease UNDERCOAT and Wax Remover SYSTEM or FOLLOWING RECOMMENDED PROCEDURES.<br />
For Wipe National with Rule KW901 Areas Grease KW902 and Anti-Static Wax Remover Panel or Kleaner<br />
Abrade For National with 400 Rule grit then Areas 500 KW902 grit sandpaper Anti-Static or Panel equivalent. Kleaner<br />
Wipe Abrade again with 400 KW901 grit then Grease 500 and grit sandpaper Wax Remover or equivalent.<br />
or KW902 Anti-Static Panel Kleaner<br />
For Wipe best results again with apply KW901 anti-corrosive Grease and primer Wax such Remover as KEP or Series KW902 epoxy Anti-Static primers Panel over Kleaner bare<br />
~<br />
metal. For KEP best Epoxy results May apply also anti-corrosive be used as primer excellent such sealer as KEP over Series all substraties epoxy primers and old over finishes. bare<br />
~<br />
metal. KEP Epoxy May also be used as excellent sealer over all substraties and old finishes.<br />
SURFACE PREPARATION<br />
OEM Blend Areas<br />
• Option OEM 1: Blend Clean Areas blend area with KW901 or KW902. Scuff blend area with<br />
gray scuff • Option pad and 1: Clean sanding blend paste. area Sanding with KW901 paste must or KW902. be thoroughly Scuff washed blend area away. with<br />
Reclean gray blend scuff pad area and with sanding KW901 paste. or Sanding KW902 paste prior must to topcoating be thoroughly washed away.<br />
Re~c l ean blend area with KW901 or KW902 prior to topcoating<br />
• Option 2: Clean blend area with KW901 or KW902. Sand blend areas<br />
with P800 • Option P1 000 2: Clean grit paper, blend area for hard with to KW901 reach areas or KW902. scuff with Sand gray scuff blend pad. areas<br />
Reclean with blend P800 area ~ P1 000 with KW901 grit paper, for hard KW902 to reach prior areas to topcoating. scuff with gray scuff pad.<br />
Re ~ clean blend area with KW901 or KW902 prior to topcoating.<br />
Note: Option 1 and 2 the OEM Blend area must be scuffed or sanded completely dull.<br />
Note: Option 1 and 2 the OEM Blend area must be scuffed or sanded completely dull.<br />
© <strong>TCP</strong> <strong>Global</strong>, All Rights Reserved, Printed in the USA June 2012<br />
© <strong>TCP</strong> <strong>Global</strong>, All Ri his Reserved, Pri nted in the USA June 2012<br />
If used as instructed, this product is designed to comply with VOC standards in low-VOC jurisdictions. Confirm compliance with state and local air quality rules before use. The data on<br />
this sheet represent typical values. Since application variables are a major factor in product performance, this information should serve only as a general guide.Custom Shop assumes no obligation or liability<br />
for use of this information. UNLESS CUSTOM SHOP AGREES IN WRITING, MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES<br />
INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR FREEDOM FROM PATENT INFRINGEMENT.CUSTOM SHOP WILL NOT BE LIABLE FOR ANY<br />
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. Your only remedy for any defect in this product is the replacement of the defective product, or a refund of its purchase price, at our option.<br />
Revised 24 April 2013<br />
Custom Shop. All rights reserved.
7. APPLICATION<br />
• Spray two (2) to three (3) medium-wet coats with an overlap of 75%<br />
until hiding and color match are achieved<br />
• Allow each coat 5-10 minutes flash or until finish is dull<br />
• Dry mils 2.0 to 3.0 mils (20-75 μm)<br />
• Wet mils 4.0 to 6.5 mils(100-165 μm)<br />
• Surface temperature should be 70-100ºF / 21-35°C with less than<br />
80% ambient humidity preferred<br />
8. FLASH / DRY TIMES<br />
AIR DRY @ 77°F (25°C)<br />
Flash between coats<br />
5-10 Minutes<br />
To Tape<br />
10-15 Minutes<br />
To Clearcoat<br />
30 Minutes<br />
NOTE: If basecoat is allowed to dry more than 24 hours before<br />
clearcoating, scuff and respray basecoat.<br />
9. GUN SET UP<br />
CONVENTIONAL GUN<br />
Gravity Feed<br />
Siphon Feed<br />
1.3 mm - 1.4 mm<br />
1.6 mm - 1.7 mm<br />
HVLP<br />
Fluid Tip<br />
1.3 mm - 1.4 mm tip<br />
AIR PRESSURES<br />
Conventional @ Gun<br />
Gravity Feed<br />
Siphon Feed<br />
HVLP Inlet Air<br />
15-20 psi (1.0-1.5 bar)<br />
30-40 psi (2.0-2.8 bar)<br />
6-8 psi (0.41-0.55 bar)<br />
See spray gun manufacturer info<br />
10. PHYSICAL DATA<br />
1:1<br />
RTS REGULATORY DATA:<br />
(XR Series Reducers)<br />
LBS./GAL g/L<br />
Actual VOC 1.25 Max. 150 Max.<br />
Regulatory VOC<br />
3.5 Max. 420 Max.<br />
(less water and exempt solvents)<br />
Density 7 - 12 840 - 1440<br />
WT.% VOL.%<br />
Total Volatile Content 70 - 95 70 - 95<br />
Water Content 0 0<br />
Exempt Compound Content 50 - 90 50 - 90<br />
Coating Category<br />
Coating Component<br />
If used as instructed, this product is designed to comply with VOC standards in low-VOC jurisdictions. Confirm compliance with state and local air quality rules before use. The data on<br />
this sheet represent typical values. Since application variables are a major factor in product performance, this information should serve only as a general guide.Custom Shop assumes no obligation or liability<br />
for use of this information.UNLESS CUSTOM SHOP AGREES IN WRITING, MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES<br />
INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR FREEDOM FROM PATENT INFRINGEMENT. WILL NOT BE LIABLE FOR ANY<br />
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. Your only remedy for any defect in this product is the replacement of the defective product, or a refund of its purchase price, at our option.<br />
Revised 24 April 2013<br />
Custom Shop. All rights reserved.