Dental Radiology - introduction - TOP Recommended Websites

More documents

Recommendations

Info

Rinsing • film should remain in the rinse water at least 20 seconds to remove the developing solution. Be sure to tilt the film rack to allow excess water to drain back in - do not dilute the fixing solution
Fixing • By fixing unexposed silver crystals are removed from the film, clearing the film and making the image translucent. • hanger moved up and down several times to make sure the fixer contacts all surfaces. • An average safe time for the film to remain in a fresh fixing solution is 10 minutes. This provides time for the emulsion to harden properly after the film has cleared. • The film may be examined briefly after 1 minute in the fixer, but it must be returned to the solution to complete the hardening process.
Page 1 and 2: Dental Radiology - introduction 3.D
Page 3 and 4: Radiography and radiology • Radio
Page 5 and 6: DENTAL X-RAY X MACHINE • The Cont
Page 7 and 8: DENTAL RADIOGRAPHIC FILM - construc
Page 9 and 10: DENTAL RADIOGRAPHIC FILM - types
Page 11 and 12: Exposing Procedure. 1. Seat the pat
Page 13 and 14: Darkroom • lightproof - walls sho
Page 15 and 16: Film processing - manual • time-t
Page 17: Developing 1. hands are clean and d
Page 21 and 22: PROTECTION • primary radiation -
Page 23 and 24: PROTECTION - aluminum filter • pl
Page 25 and 26: PROTECTIVE MEASURES Technician Prot
Page 27 and 28: Radiation Protection The Internatio
Page 29: What is justification? • Before a

Dental Radiology - introduction - TOP Recommended Websites

Create successful ePaper yourself

Delete template?

Save as template?