Golf Irrigation Catalog - Toro

More documents

Recommendations

Info

720/720G Series Radius: 22’–55’ Flow rate: 0.85–11.62 GPM 40°–360° Full- and adjustable part-circle 720/720G Series Specifications Radius: 720: 22'–38' (6,7–11,5m) 720G: 19'–38' (5,5–11,5m) Flow rate (MultiMatrx adjustable-flow nozzle): 720: 3–9 GPM (11,3–34 LPM) 720G: 0.85–11.62 GPM (3,7–44,0 LPM) Optimum nozzle performance: 65 psi (4,5 Bar) Adjustable trajectory: 5°–25° Recommended operating pressure range: 720: Electric: 40–120 psi (2,0–8,4 Bar) Normally Open: 40–90 psi (2,0–6,2 Bar) Check-O-Matic: 40–90 psi (2,0–6,2 Bar) 720G: 20–50 psi (1,7–3,5 Bar) Standard pressure regulation: 720: 65 psi (4,5 Bar) (electric models only) Inlet: 720: 1” (25mm) female threaded NPT, ACME and BSP 720G: 3 ⁄4" threaded Dimensions: 720: Pop-up to center of nozzle: 2 7 ⁄8" (73mm) Body Height: 10" (250mm) 720G: Pop-up to center of nozzle: 2 5 ⁄8" (67mm) Body Height: 7" (180mm) Check-O-Matic: 720: Maintains up to 37’ (11,2m) of elevation change 720G: Maintains up to 10’ (3,1m) of elevation change 720 Series MultiMatrx Nozzle—TruJectory Performance @ 65 psi 3.0 GPM (11 l/mn) 4.0 GPM (15 l/mn) 4.5 GPM (17 l/mn) 25° 7° 25° 7° 28 ft. (8,5m) 22 ft. (6,7m) 34 ft. (10,4m) 27 ft. (8,2m) 25° 7° 25° 7° 30 ft. (9,2m) 23 ft. (7,0m) 6.0 GPM (23 l/mn) 8.0 GPM (30 l/mn) 9.0 GPM (34 l/mn) 720—Apex at 65 psi 28 Nozzle GPM Max. Height of Spray 25° 7° Distance from Head Max. Height of Spray Distance from Head 3.0 9'4" 22' 1'5" 10' 4.0 9'6" 22' 1'7" 12' 4.5 10'6" 27' 1'8" 13' 6.0 11.0' 28' 1'10" 14' 8.0 11'6" 30' 2' 15' 9.0 12.0' 31' 2' 15' 36 ft. (11,0m) 28 ft. (8,5m) 25° 7° 25° 7° 32 ft. (9,8m) 23 ft. (7,0m) 38 ft. (11,6m) 27 ft. (8,2m) 720 MultiMatrx MPR Combinations The following nozzle sets may be used in combinations to deliver a balanced precipitation rate. #3 #6 #3 #6 OR #4 #8 #4 #8 OR #4.5 #9 #4.5 #9 OR Combinations assume that all nozzles are operating at the same pressure. In addition, sprinklers can run off the same line if adequate flow exists. Features • TruJectory radius adjustment • Full-circle and adjustable partcircle (40°–360°) models available • High pop-up height to clear taller grasses • All adjustments made from the top—wet or dry • Balanced precipitation rates 25° 7° 25° 7° 25° 7° 25° 7° 25° 7° 25° 7° • Time-proven planetary gear-drive design • Variable reversing stator • All internal components serviceable from the top of the sprinkler with Servi-Snap • Durable engineering plastic and stainless steel construction • Effluent water models available 720G Series MultiMatrx Nozzle—TruJectory Performance @ 50 psi 1.0 GPM (4 l/mn) 1.5 GPM (6 l/mn) 2.0 GPM (8 l/mn) 31 ft. (9,5m) 19 ft. (5,8m) 33 ft. (10,1m) 20 ft. (6,1m) 3.0 GPM (11 l/mn) 4.0 GPM (15 l/mn) 4.5 GPM (17 l/mn) 38 ft. (11,6m) 22 ft. (6,7m) 41 ft. (12,5m) 23 ft. (7,0m) 6.0 GPM (23 l/mn) 8.0 GPM (30 l/mn) 9.0 GPM (34 l/mn) 47 ft. (14,3m) 27 ft. (8,2m) 720 720G MultiMatrx MPR Combinations The following nozzle sets may be used in combinations to deliver a balanced precipitation rate. #1 #2 #3 #4 OR #1.5 #3 #4.5 #6 OR #2 #4 #6 #8 OR Combinations assume that all nozzles are operating at the same pressure. In addition, sprinklers can run off the same line if adequate flow exists. 48 ft. (14,6m) 28 ft. (8,5m) 720G—Apex at 50 psi Nozzle Set Max. Height of Spray 25° 7° 25° 7° 25° 7° Distance from Sprinkler 720G Max. Height of Spray 37 ft. (11,3m) 23 ft. (7,0m) 42 ft. (12,8m) 23 ft. (7,0m) 48 ft. (14,6m) 27 ft. (8,2m) Distance from Sprinkler 1 7’8” (2,3m) 15’ (4,6m) 1’5” (0,4m) 9’ (2,7m) 1.5 7’8” (2,3m) 15’ (4,6m) 1’5” (0,4m) 9’ (2,7m) 2 8’4” (2,5m) 19’ (5,8m) 1’5” (0,4m) 10’ (3,0m) 3 9’4” (2,8m) 22’ (6,7m) 1’5” (0,4m) 10’ (3,0m) 4 9’6” (2,9m) 22’ (6,7m) 1’7” (0,5m) 12’ (3,7m) 4.5 10’6” (3,2m) 27’ (8,2m) 1’8” (0,5m) 13’ (4,0m) 6 11’0” (3,4m) 28’ (8,5m) 1’10” (0,6m) 14’ (4,3m) 8 11’6” (3,5m) 30’ (9,1m) 2’0” (0,6m) 15’ (4,6m) 9 12’0” (3,7m) 31’ (9,4m) 2’0” (0,6m) 15’ (4,6m) Specifying Information—720G Series 72XG-E Arc Optional 72XG E 4—Full-circle E—Effluent Model 5—Part-circle Example: When specifying a full-circle 720G Sprinkler, you would specify: 724G Specifying Information—720 Series Body Arc 72X-X-X-39X-E Threads Valve-In-Head Type Pressure Regulation* Optional 72X X X 39X E 4—Full-circle 5—Part-circle 0—NPT 4—ACME 5—BSP 1—N.O. Hydraulic 2—Check-O-Matic 6—Electric 6—65 psi E—Effluent Model Example: When specifying a full-circle 720 Series Sprinkler with NPT threads, electric valve and pressure regulation at 65 psi, you would specify: 724-06-396
720/720G Series 720 Series MultiMatrx Nozzle Performance @ 25° Trajectory—U.S. Nozzle Set 3.0 4.0 4.5 6.0 8.0 9.0 psi GPM Radius Prec. Rate* ▲ ■ 50 3.00 32 0.24 0.28 65 3.42 32 0.28 0.32 80 3.81 32 0.31 0.36 50 4.16 33 0.32 0.37 65 4.69 35 0.32 0.37 80 5.25 35 0.36 0.41 50 4.75 35 0.32 0.37 65 5.41 36 0.25 0.40 80 6.02 37 0.37 0.42 50 5.95 37 0.36 0.42 65 6.87 39 0.38 0.43 80 7.71 39 0.42 0.49 50 7.43 38 0.43 0.50 65 8.61 42 0.41 0.47 80 9.75 42 0.46 0.53 50 8.14 41 0.40 0.47 65 9.67 44 0.42 0.48 80 10.75 47 0.41 0.47 720G Series MultiMatrx Low-pressure Nozzle Performance Data—U.S. l Nozzle Set 1.0 1.5 2.0 3.0 4.0 psi GPM Radius Prec. Rate* Nozzle Prec. Rate* GPM Radius ▲ ■ Set ▲ ■ 25 0.85 29 0.11 0.10 3.23 27 0.49 0.43 30 0.94 30 0.12 0.10 3.68 30 0.45 0.39 35 1.02 31 0.12 0.10 4.09 34 0.39 0.34 40 1.08 31 0.12 0.11 4.42 36 0.38 0.33 45 1.12 31 0.13 0.11 4.71 39 0.34 0.30 50 1.17 31 0.14 0.12 4.5 4.98 39 0.36 0.32 55 1.21 31 0.14 0.12 5.23 40 0.36 0.31 60 1.24 32 0.13 0.12 5.41 40 0.38 0.33 65 1.28 32 0.14 0.12 5.62 41 0.37 0.32 70 1.31 31 0.15 0.13 5.84 41 0.39 0.33 75 1.34 30 0.17 0.14 6.00 42 0.38 0.33 25 1.05 25 0.19 0.16 4.00 28 0.57 0.49 30 1.15 27 0.18 0.15 4.56 31 0.53 0.46 35 1.25 29 0.17 0.11 5.05 35 0.46 0.46 40 1.33 30 0.16 0.14 5.51 35 0.45 0.39 45 1.42 31 0.16 0.14 5.90 39 0.43 0.35 50 1.49 31 0.17 0.15 6.0 6.27 41 0.41 0.36 55 1.35 31 0.18 0.16 6.61 42 0.42 0.36 60 1.60 30 0.20 0.17 6.87 43 0.41 0.36 65 1.66 30 0.21 0.18 7.14 44 0.41 0.36 70 1.70 30 0.21 0.18 7.43 44 0.43 0.37 75 1.75 30 0.22 0.19 7.68 44 0.44 0.38 25 1.44 27 0.22 0.19 5.02 28 0.71 0.62 30 1.65 29 0.22 0.19 5.63 31 0.65 0.56 35 1.82 32 0.20 0.17 6.28 35 0.57 0.49 40 1.96 33 0.20 0.17 6.84 38 0.53 0.46 45 2.08 31 0.20 0.17 7.36 42 0.46 0.40 50 2.15 34 0.21 0.18 8.0 7.85 43 0.47 0.41 55 2.29 35 0.21 0.18 8.26 45 0.45 0.39 60 2.39 35 0.22 0.19 8.61 45 0.47 0.41 65 2.48 36 0.21 0.18 8.99 45 0.49 0.43 70 2.57 36 0.22 0.19 9.29 46 0.49 0.42 75 2.64 37 0.21 0.19 9.61 47 0.48 0.42 25 1.85 26 0.30 0.26 5.57 29 0.74 0.64 30 2.09 28 0.30 0.26 6.25 33 0.64 0.55 35 2.34 32 0.25 0.22 6.96 37 0.57 0.49 40 2.54 33 0.26 0.32 7.58 39 0.55 0.48 45 2.73 34 0.26 0.23 8.16 42 0.51 0.45 50 2.89 34 0.28 0.24 9.0 8.75 44 0.50 0.44 55 3.04 35 0.28 0.24 9.23 46 0.49 0.42 60 3.15 35 0.29 0.25 9.67 47 0.49 0.42 65 3.30 36 0.28 0.25 10.09 49 0.47 0.40 70 3.42 36 0.29 0.25 10.42 49 0.48 0.42 75 3.55 37 0.29 0.25 10.89 50 0.48 0.42 25 2.73 26 0.45 0.39 ■ = Nozzles not recommended at 30 3.09 30 0.38 0.33 this pressure. 35 3.47 33 0.35 0.31 ■ = Optimum nozzle performance. 40 3.72 34 0.36 0.31 * ▲ Precipitation rates are for triangular spacing, shown in inches per hour, calculated at 50% 45 4.06 35 0.37 0.32 of diameter. 50 4.31 36 0.37 0.32 ■ Precipitation rates are for square spacing, 55 4.52 38 0.35 0.30 shown in inches per hour, calculated at 50% 60 4.69 38 0.36 0.31 of diameter. 65 4.88 39 0.36 0.31 All performance specifications are based 70 5.05 39 0.37 0.32 on the stated working pressure available at the base of the sprinkler. 75 5.21 39 0.38 0.33 Radius shown in feet. Data based on 360°. 720 Series MultiMatrx Nozzle Performance @ 25° Trajectory— Metric Nozzle Set 3.0 4.0 4.5 6.0 8.0 9.0 720G Series MultiMatrx Low-pressure Nozzle Performance Data—Metric l Nozzle Set 4.0 6.0 8.0 11.0 15.0 17.0 23.0 30.0 34.0 Base Pressure Bar kPa Kg/cm 2 LPM Radius 3,5 350 3,57 11,5 9,8 4,5 450 4,59 13,0 9,8 5,5 550 5,61 14,4 9,8 3,5 350 3,57 15,8 10,1 4,5 450 4,59 17,8 10,7 5,5 550 5,61 19,8 10,7 3,5 350 3,57 18,1 10,7 4,5 450 4,59 20,5 11,0 5,5 550 5,61 22,7 11,3 3,5 350 3,57 22,7 11,3 4,5 450 4,59 26,1 11,9 5,5 550 5,61 29,1 11,9 3,5 350 3,57 28,4 11,7 4,5 450 4,59 32,7 12,8 5,5 550 5,61 36,8 12,8 3,5 350 3,57 31,0 12,5 4,5 450 4,59 36,6 13,4 5,5 550 5,61 40,6 14,3 Base Pressure Bar kPa Kg/cm 2 LPM Radius m 2 /hr 2,0 200 2,04 4,0 9,0 0,24 2,5 250 2,55 4,4 9,2 0,26 3,0 300 3,06 4,8 9,5 0,29 3,5 350 3,57 5,1 9,5 0,30 4,0 400 4,08 5,3 9,3 0,30 4,5 450 4,59 5,5 9,2 0,30 5,0 500 5,10 5,7 9,2 0,30 2,0 200 2,04 4,8 9,4 0,29 2,5 250 2,55 5,3 0,8 0,32 3,0 300 3,06 5,8 10,1 0,35 3,5 350 3,57 6,3 10,1 0,38 4,0 400 4,08 6,8 10,1 0,40 4,5 450 4,59 7,2 10,1 0,40 5,0 500 5,10 7,5 9,8 0,40 2,0 200 2,04 7,7 9,8 0,46 2,5 250 2,55 8,5 10,7 0,51 3,0 300 3,06 9,3 11,1 0,56 3,5 350 3,57 10,0 11,3 0,60 4,0 400 4,08 10,5 11,6 0,63 4,5 450 4,59 10,7 11,6 0,64 5,0 500 5,10 11,0 11,5 0,70 2,0 200 2,04 9,5 10,0 0,57 2,5 250 2,55 10,8 11,0 0,65 3,0 300 3,06 11,9 11,4 0,72 3,5 350 3,57 13,0 11,6 0,78 4,0 400 4,08 13,9 11,8 0,83 4,5 450 4,59 14,6 11,9 0,87 5,0 500 5,10 15,3 11,8 0,90 2,0 200 2,04 12,4 10,0 0,74 2,5 250 2,55 14,3 11,0 0,86 3,0 300 3,06 15,9 11,9 0,95 3,5 350 3,57 17,2 12,5 1,03 4,0 400 4,08 18,4 12,6 1,11 4,5 450 4,59 19,5 12,8 1,17 5,0 500 5,10 20,2 12,8 1,20 2,0 200 2,04 13,7 10,0 0,82 2,5 250 2,55 15,7 11,4 0,94 3,0 300 3,06 17,8 12,2 1,07 3,5 350 3,57 19,4 12,8 1,16 4,0 400 4,08 20,8 13,2 1,25 4,5 450 4,59 21,9 13,7 1,32 5,0 500 5,10 23,0 14,0 1,40 2,0 200 2,04 19,1 10,3 1,15 2,5 250 2,55 21,9 12,3 1,31 3,0 300 3,06 24,7 13,4 1,48 3,5 350 3,57 26,1 14,3 1,56 4,0 400 4,08 27,7 15,1 1,66 4,5 450 4,59 29,3 15,5 1,76 5,0 500 5,10 30,6 15,9 1,84 2,0 200 2,04 21,8 10,3 1,31 2,5 250 2,55 26,9 12,3 1,61 3,0 300 3,06 29,1 13,6 1,75 3,5 350 3,57 31,8 14,6 1,91 4,0 400 4,08 34,2 15,4 2,05 4,5 450 4,59 36,3 15,8 2,18 5,0 500 5,10 38,2 16,5 2,29 2,0 200 2,04 24,7 10,4 1,48 2,5 250 2,55 28,6 12,3 1,72 3,0 300 3,06 32,4 13,6 1,95 3,5 350 3,57 35,5 14,6 2,13 4,0 400 4,08 38,1 15,5 2,29 4,5 450 4,59 40,7 16,1 2,44 5,0 500 5,10 42,7 16,5 2,56 ■ = Pressure regulating models. ■ = Spacing not recommended above 11,6m. All performance specifications are based on the stated working pressure available at the base of the sprinkler. Radius shown in meters. Data based on 360°. 29 720/720G Series
Page 1 and 2: Golf Irrigation Catalog • ROTORS
Page 3 and 4: Table of Contents Distribution 4 Cu
Page 5 and 6: Customer Care You Can Count On At T
Page 7 and 8: Toro Irrigation Solutions: Precise.
Page 9 and 10: Toro ® Turf Guard Wireless Soil Mo
Page 11 and 12: TORO Innovation has led the way in
Page 13 and 14: 835S/855S Series Spike-Guard Solen
Page 15 and 16: 835S/855S Series Mainless Nozzle Pe
Page 17 and 18: 834S/854S Series The Industries Lar
Page 19 and 20: 834S/854S Series 834S Series Perfor
Page 21 and 22: DT35 Features • Nozzle variations
Page 23 and 24: DT35 Series Performance Chart—Met
Page 25 and 26: DT34/DT54 Series DT34/DT54 Series D
Page 27: DT34 Series Performance Chart—Met
Page 31 and 32: 810G “L” Performance Data—U.S
Page 33 and 34: 640 Series Performance Data—U.S.
Page 35 and 36: Sprays and Micro-Irrigation Overvie
Page 37 and 38: Patented X-Flow® Shut-off Device W
Page 39 and 40: 5' (1,5m) 12' (3,7m) 8' (2,4m) 15'
Page 41 and 42: Performance Data—Metric MPR Plus
Page 43 and 44: Tee Box Systems Specifications Tee
Page 45 and 46: Model 220G Series P-220G Series 252
Page 47 and 48: Manual flow control Combined intern
Page 49 and 50: P-220G Valves Electric & Pressure-r
Page 51 and 52: 476-01 477-00 474-44 Features • 3
Page 53 and 54: Model Wire Paths Maximum Stations p
Page 55 and 56: SitePro ® Central Control Systems
Page 57 and 58: Standard Features • 1 Gateway/800
Page 59 and 60: Close PRISM Pocket PC Remote Irrig
Page 61 and 62: N S N ® Renewal Plan Comparison fo
Page 63 and 64: Model Network VP ® E-OSMAC ® OSMA
Page 65 and 66: Features • A larger station count
Page 67 and 68: Features • Modular solid-state de
Page 69 and 70: Features • Operates as stand-alon
Page 71 and 72: GDC Specifications Feature Using St
Page 73 and 74: We’re here when you need us Techn
Page 75 and 76: Technical Data VALVE SPECIFICATIONS
Page 77 and 78: Maximum Monthly ET Rates— Major M
Page 79 and 80:
The Toro Limited Warranty for Irrig
show all

Golf Irrigation Catalog - Toro

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?