Golf Irrigation Catalog - Toro

P-220G Series
Featuring Spike-Guard Solenoid
Technology
1”, 1 1 /2”, 2”, 3”
Electric, Pressure-regulating
Globe, Angle
P-220G Series
Specifications
Recommended flow range (by size):
1“ (25mm): 5–35 GPM (20–159 LPM)
1 1 ⁄2“ (40mm): 30–110 GPM (114–400 LPM)
2“ (50mm): 80–180 GPM (300–600 LPM)
3“ (75mm): 150–300 GPM (568–1100 LPM)
Operating pressure (by model):
Electric: 10–220 psi (0,7–15 Bar)
Pressure-regulating:
– Outlet: (EZR-100) 5–100 psi, ± 3 psi
(0,3–7,0 Bar ± 0,2 Bar)
– Inlet: 15–220 psi (1,0–15 Bar)
– Minimum pressure differential (between inlet & outlet
required for regulation: 10 psi (0,7 Bar)
Body styles:
Globe/angle: 1“, 1 1 ⁄2“, 2” and 3” (25mm, 40mm, 50mm
and 75mm) female-threaded inlet and outlet
Spike-Guard Solenoid (24 V ac, 50/60 Hz, Standard):
– 20,000 Volt lightning rating
– Inrush: 50 Hz, 0.17 amps
60 Hz, 0.12 amps
– Holding: 50 Hz, 0.15 amps
60 Hz, 0.10 amps
DC Latching Solenoid:
For 2-wire decoder systems
Dimensions (by size):
1” (25mm): 6 3 ⁄4 “ H x 3 5 ⁄8 “ W (171 x 92mm)
1 1 ⁄2 “ (40mm): 7 1 ⁄4 “ H x 3 5 ⁄8 " W (184 x 92mm)
2” (50mm): 9 1 ⁄2 “ H x 6 1 ⁄8“ W (241 x 156mm)
3” (75mm): 10 3 ⁄4“ H x 6 1 ⁄8“ W (273 x 156mm)
Burst pressure safety rating:
750 psi (50 Bar)
P220G-27-00
P220G-27-08
Features
Features
• Spike-Guard
solenoid keeps
the system
running
- Nearly three times the lightning
protection of the competition
- Less than half the amperage—
run more valves simultaneously
or reduce wiring costs
• Tough, 33% glass-filled nylon
(GFN) and stainless steel
construction
• Globe/Angle configuration
• Rugged, reinforced bonnet
design withstands
tough and
high-pressure
applications
• Precise pressure control
with compact EZReg ®
dial-design technology
• Pressure regulates in electric and
manual modes, serviceable under
pressure
• Forward-flow design for more
precise regulation
P220G-27-06
P220G-27-04
• Standard, built-in Schrader-type
valve for downstream pressure
verification
• Anti-vandal dust cap for pressureregulating
module
• No external tubing
• Internal downstream manual bleed
keeps valve box dry
• External manual bleed for system
flushing
• Ergonomic manual flow control:
adjustable to zero flow
• Flow control independent of
solenoid
• Tough, double-beaded, fabricreinforced
rubber diaphragm rated
at 750 psi (51,7 Bar) burst pressure
• Self-aligning bonnet to ensure
correct installation
• Skirt on flow control for debris
resistance
• Self-cleaning, stainless steel
metering rod
• Brass flow control stem—2" and 3"
(50mm and 75mm) models
• Low-flow capability down to
5 GPM (18,9 LPM)
• Easily serviced without system
removal
• Low power requirement for longer
wire runs
Pressure
Regulator
The P-220 Series with the EZReg®
module regulates with precision. It
can regulate with flows of only 5
GPM (1" valve) and it only requires
10 psi differential to operate. The
pressure regulator can be easily
and quickly installed—even under
pressure, with no danger of water
geysers from the removed solenoid
area or opening of the valve.
48