CHAPTER 5 - Hafele

CHAPTER 5 

Door Closers 

AH 5.1

Door Closers 

Table of Contents 

Information 

Information on door closers 

Classification 

5.3 

5.4 

StarTec Door Closers 

5 

Overhead position door closers 

Mini HS 850 

DCL 11, DCL 12 

HS 950 

HS 1800 

DCL 15 

DCL 51 

DCL 55 

DCL 61 

DCL 91 

DCL 84 

DCL 83 

DCL 92 

Accessories for overhead door closers with guide rail 

Concealed door closers 

DCL 34 

DCL 32 

DCL 33 

Floor springs 

DCL 41, 43 

DCL 40 

Floor spring accessories 

Other door closer types 

For aluminum frame construction 

For sliding doors 

Accessory: Door coordinator 

5.6 

5.6 

5.6 

5.8 

5.9 

5.10 

5.11 

5.13 

5.14 

5.15 

5.16 

5.17 

5.18 

5.19 

5.21 

5.21 

5.22 

5.23 

5.24 

5.24 

5.25 

5.26 

5.33 

5.33 

5.34 

5.35 

Dimensions in mm 

Inches are approximate 

AH 5.2 

Dorma Door Closers 

Overhead position door closers 

TS 68 

TS 71 

TS 73 

TS 83 

TS 90 

TS 91 

TS 92 

TS 93 

ITS 96 N 


Floor springs 

BTS 65 

BTS 75 V 

BTS 84 

BTS 80 


Porteo Automatic Door Operator 

Accessories for Porteo Automatic Door Operator 

5.36 

5.36 

5.36 

5.37 

5.38 

5.39 

5.39 

5.40 

5.41 

5.41 

5.42 

5.46 

5.46 

5.47 

5.47 

5.47 

5.48 

5.51 

5.52 

Prices • Availability • Ordering • www.hafele.com 

Call +632 571 3683 - Manila • +6332 345 3672 - Cebu 

Dimensional data not binding. We reserve the right to alter specifications without notice.

Door Closers – StarTec 

Information 

Door closer functions in the door operating range 

d 

b 

a 

b 

c 

a. Backcheck 

With backcheck, the swing of a forcefully opened door 

(manually or for example by gusts of wind) is reduced. 

Damage to the door or wall are therefore minimised or eliminated. 

b. Closing speed 

The exact setting of the closing speed guarantees a controlled 

closing of the door leaf. 

c. Delayed closing action 

With backcheck, the swing of a forcefully opened door 

(manually or for example by gusts of wind) is reduced. 

Damage to the door or wall are therefore minimised or eliminated. 

d. Latching action 

The latching action controls the closing of the door and ensures, that 

the lock closes reliably. It can be adjusted with most door closers. 

Mounting options 

5 

Standard installation 

(door leaf installation) on the pull side 

Overhead installation 

(transom fixing) on the pull side 

Dimensional data not binding. We reserve the right to alter specifications without notice. 


(door leaf installation) on the push side 


(transom fixing) on the push side 





AH 5.3


Information 

Classification of door closers in compliance with EN 1154:1996 

The requirements and test procedures for door closers are defined in European standard EN 1154:1996 “Locks and Architectural Hardware 

– Controlled door closing devices”. The requirements are classified using a six-position designation system. 

6-position classification key: 

Position 

1 Category of use 2 Durability 3 Door closer size 4 Suitability for use 

on fire resistance 

smoke control doors 

5 Safety 6 Corrosion 

resistance 

5 



AH 5.4 

6-position classification key: 

Position 

Possible 

classes 

Meaning 

1 Category of use 3 Closing of door from opening angle > 105° 

4 Closing of door from opening angle 180° 

2 Durability 8 500,000 test cycles 

3 Door closer size* 1 Door width: max. 750 mm; test door weight: 20 kg 

4 Suitability for use on 

fire resistant/smoke control doors 

2 Door width: max. 850 mm; test door weight: 40 kg 






0 Not suitable for use on fire resistant and smoke control doors 

1 Suitable for use on fire resistant and smoke control doors 

5 Safety 1 All door closers must meet the substantial safe usage requirements. 

For this reason, only class 1 has been defined. 

6 Corrosion resistance 0 No defined corrosion resistance 

1 Low corrosion resistance 

2 Medium corrosion resistance 

3 High corrosion resistance 

4 Extremely high corrosion resistance 

5 Extraordinarily high corrosion resistance 

* Where a door closer provides a range of closing force sizes both the minimum and maximum size must be identified 

(also see following table). 

From page 





Information 

Definition of the individual door closer sizes: 

Door closer 

size 

Recommended 

door width 

mm max. 

Test door 

weight 

kg 

Closing moment 

Nm 

Holding 

moment 

Nm 

Door closer 

efficiency 

% 

between 

0° and 4° 

between 

88° and 92° 

at any other 

opening angle 

between 

0° and 60° 

between 

0° and 4° 

min. max. min. min. max. min. 

1 750 20 9 13 3 2 26 50 

2 850 40 13 18 4 3 36 50 

3 950 60 18 26 6 4 47 55 

4 1100 80 26 37 9 6 62 60 

5 1250 100 37 54 12 8 83 65 

6 1400 120 54 87 18 11 134 65 

7 1600 160 87 140 29 18 215 65 

Example (see page AH 5.7, “DCL 11”): 

• Class: 

4 8 3 1 1 3 

Category of use 

(Closing from 

opening angle 180°, class 4) 

5 

Durability 

(500,000 cycles, class 8) 

Door closer size 

(Door width: max. 950 mm; 

test door weight: 60 kg, 

class 3) 

Suitability for use on 

fire resistant/smoke control doors 

(Suitable for use on fire 

resistant and smoke control doors, 

class 1) 


Safety 

(Class 1) 

Corrosion resistance 

(High corrosion resistance, class 3) 





AH 5.5

Overhead Door Closers – StarTec 

With arm 

Mini HS 850 

EN 2 

Features 

• Continuously adjustable closing speed 

• Latching action 

• With standard arm without hold open function 

• Suitable for DIN left hand and DIN right hand 

• Closing force according to EN 1154 

Technical data 

• Max. door leaf width 850 mm 

• Max. door weight 

45 kg 

• Max. door opening angle Approx. 180˚ 

Note 

• Factory setting of closing force complying with EN 1154: EN 2 

Version (with standard arm) 

Cat. No. 

Regular, silver color 931.89.079 

Packing: 1 piece 

5 



AH 5.6 





With arm 


EN 3 


(door leaf installation) 

on pull side 

Fire resistance and smoke control 

Tested for fire resistant and smoke control doors. 

The use of a hold open device on fire resistant and smoke control doors is not permitted. 

• Version: Optionally with standard arm or interlocking hold open arm 

• Installation: Suitable for standard installation on pull side and overhead installation on push side 

• Adjustment facility: Closing speed continuously adjustable, backcheck adjustable, 

latching action continuously adjustable 

• Closing force: 3 

• Door width: ≤950 mm 

• Opening angle: ≤180° 

• Hold open angle: ≤145° 

• Mounting: For DIN left hand and DIN right hand use 

• Standard: DCL 11 certified in compliance with EN 1154:1996/A1:2002 

• Class: 4 8 3 1 1 3 


(transom fixing) 

on push side 

5 


Version 



Cat. No. 

DCL 11 set 

DCL 11 with standard arm, silver colored 931.84.649 

DCL 12 set 

DCL 11 with hold-open arm, silver colored 931.84.659 


Door Closer 

Overhead Position Door Closer 

HTH IPI 09/094/03.12.2009/8021 

fi 

Certification upon request 



AH 5.7


With arm 

HS 950 

EN 3 

5 


The use of a hold open device on fire resistant and smoke 

control doors is not permitted. 

Fig 1 Standard application 

Closer is fixed to the pull side of 

the door 

Fig 61 Transom application 

Closer is fixed to the push side of 

the door (overhead installation) 

Features 

• Hydraulic latching action valve adjustable 

• Closing speed valve adjustable 

• Optional with hold-open arm (not fire-rated) 

• Suitable for DIN right hand and DIN left hand 



• Max. door leaf width 850-950 mm 

• Max. door leaf weight 60 kg 


• Class: 

4 8 3 0 1 3 



AH 5.8 

Note 

• Factory setting of closing force complying with EN 1154: EN 3 

Version 

Cat. No. 

HS 950, EN3 with standard arm, silver color 931.89.029 

HS 950, EN3 with hold-open arm, silver color 931.89.039 






With arm 

HS 1800 

EN 3 




Features 

• Variably adjustable closing speed 

• Latching action variably adjustable 

• Optional with standard arm or hold-open arm 




• Closing force size EN 3 

• Door width size 

950 mm 

• Max. door weight 

80 kg 


Version 

Cat. No. 

With standard arm, silver color 931.84.619 

With hold-open arm, silver color 931.84.609 


5 






AH 5.9


With arm 

DCL 15, 16 

EN 2 – 4 

5 



on pull side 



on push side 






AH 5.10 

• Version: Optionally with standard arm or interlocking hold open arm 





• Door width:


With arm 

DCL 51 

EN 2–5 



on pull side 



on push side 

5 





• Version: Optionally with standard arm or hold open arm 


• Adjustment facility: Closing speed, backcheck and latching action adjustable 

• Closing force: 2 – 5 

• Door width: ≤1,250 mm 

• Door weight: ≤100 kg 




• Standard: Certified in compliance with EN 1154:1996/A1:2002 

• Class: 4 8 2 – 5 1 1 3 

Version 



Silver colored 

lacqured 

Stainless steel 

matt 

Brass 

polished 

DCL 51 set with standard arm 

1 DCL 51 with standard arm 931.84.829 931.84.820 931.84.828 

DCL 51 set with hold open arm 

1 DCL 51 with hold open arm 931.84.669 931.84.660 931.84.668 


Door Closer 


HTH IPI 09/094/03.12.2009/8021 

fi 




AH 5.11


Accessories for overhead door closers with arm 

Fixing bracket for parallel arm installation 

For DCL door closer 

• Area of application: For mounting arm parallel to door frame 

• Colour: 

Silver coloured 

Note 

The closing speed is reduced by approx. 20% when using a 

fixing bracket for parallel arm. 

Closing forces with parallel arm installation 

Model Tested to Closing force 

DCL 11 EN1154:1996/A1:2002 3 

DCL 15 EN1154:1996/A1:2002 3 

DCL 51 EN1154:1996/A1:2002 2 – 4 

Please note the different closing forces with parallel arm 

installation compared to standard installation. 

Cat. No. 

Fixing bracket for parallel arm installation 931.84.900 


5 



AH 5.12 





With arm 

DCL 55 

EN 2 – 6 



on pull side 



on push side 




5 


• Version: Optionally with standard arm or hold open arm 


• Adjustment facility: Closing speed, backcheck, and latching action adjustable 








• Class: 4 8 2 – 6 1 1 3 

Version 




lacquered 

DCL 55 set 

1 DCL 55 with standard arm, silver colored lacquered 931.84.769 

1 DCL 55 with interlocking hold open arm, silver colored lacquered 931.84.819 


Door Closer 


HTH IPI 09/094/03.12.2009/8021 

fi 




AH 5.13


With guide rail 

DCL 61 

EN 2 – 4 

5 



on pull side 



on pull side 

Transom fixing 

on push side 






AH 5.14 

• Version: Optionally with hold open function 

• Installation: Suitable for standard and overhead installation on pull side or soffit installation on push side 








Version 

Silver colour 

lacquered 


matt 

DCL 61 set 

1 Overhead door closer with guide rail, without hold open function 931.84.139 931.84.130 

1 Overhead door closer with guide rail and hold open function 931.84.119 931.84.110 

Order reference 

Mounting plate for door closer supplied. 

Door Closer 


HTH IPI 09/094/03.12.2009/8021 

fi 






With arm 

DCL 91 

EN 1 – 4 



on pull side 



on push side 



on pull side 

5 





• Version: With safety valve against overloading, optionally with hold open insert 

• Installation: Standard and overhead installation on pull side, overhead installation on push side 

• Adjustment facility: Closing force continuously adjustable, closing speed and latching action continuously adjustable from the front 

via valve, optional hold open insert that can be enabled or disabled 




• Hold open angle: approx. 75 – 150° 



• Class: 4 8 1 – 4 1 1 4 

Version 



Silver colour 

lacquered 


coloured 

lacquered 

DCL 91 set 

1 Overhead door closer with guide rail 931.20.209 931.20.200 

1 Basic closer – 931.20.009 931.20.000 

1 Guide rail – 931.20.109 931.20.100 

DCL 91 set with hold open insert 

1 Overhead door closer with guide rail and hold open insert 931.20.219 931.20.210 

1 Basic closer – 931.20.009 931.20.000 

1 MF guide rail – 931.20.119 931.20.110 



Door Closer 


HTH IPI 09/094/03.12.2009/8021 

fi 




AH 5.15



DCL 84 

EN 3 

5 



on pull side 



on pull side 






AH 5.16 


• Installation: Suitable for standard and overhead installation on pull side 

• Adjustment facility: Closing speed continuously adjustable, latching action continuously adjustable 






• Standard: Certified in compliance with EN 1154: 1996/A1: 2002 

• Class: 3 8 3 1 1 3 

Version 

Silver colour 

DCL 84 set 

1 DCL 84 without hold open function 931.84.319 

1 DCL 84 with hold open function 931.84.329 

Door Closer 


HTH IPI 09/094/03.12.2009/8021 

fi 






With arm 

DCL 83 

EN 2 – 4 



on pull side 






on pull side 

5 



• Installation: Suitable for standard and overhead installation on pull side 









• Class: 3 8 2 – 4 1 1 3 

Version 



Silver colour 

DCL 83 set 



Door Closer 


HTH IPI 09/094/03.12.2009/8021 

fi 




AH 5.17


With arm 

DCL 92 

EN 3 – 6 

5 



on pull side 



on pull side 



on push side 






AH 5.18 

• Version: With safety valve against overloading, optionally with hold open insert 

• Installation: Suitable for standard and overhead installation on pull side, overhead installation on push side 

• Adjustment facility: Closing force continuously adjustable, closing speed, backcheck and latching action continuously adjustable, 

optional hold open insert that can be enabled or disabled 







• Class: 4 8 3 – 6 1 1 4 

Version 

DCL 92 set 

Silver colour 

lacquered 


coloured 

lacquered 

1 Overhead door closer with guide rail 931.20.329 931.20.320 

1 Basic closer – 931.20.019 931.20.010 

1 Guide rail – 931.20.109 931.20.100 

DCL 92 set with hold open insert 

1 Overhead door closer with guide rail and hold open insert 931.20.339 931.20.330 

1 Basic closer – 931.20.019 931.20.010 

1 MF guide rail – 931.20.119 931.20.110 



Door Closer 


HTH IPI 09/094/03.12.2009/8021 

fi 







Soffit fixing bracket 

For DCL 91 / 92 

• Area of application: For overhead installation of door closer to 

push side 

Silver color 

lacquered 

Soffit fixing bracket for DCL 91 931.20.409 

Soffit fixing bracket for DCL 92 931.20.509 


For DCL 91 For DCL 92 

Clamping plate for all-glass doors 

For DCL 91 / 92 

• Area of application: For glass thickness 8 – 10 mm 


for DCL 91 


for DCL 92 


Silver color 

lacquered 

931.20.419 

931.20.519 

5 


Soffit fixing bracket for guide rail 

For guide rail for DCL 91 BG / 92 BG 







• Area of application: For mounting guide rail on door frame with 

deep soffit 

Silver color 

lacquered 

Soffit fixing bracket 931.20.429 




AH 5.19



Mounting plate for guide rail 

For DCL 91 / 92 

• Area of application: For mounting guide rail on fire resistant 

and smoke control doors, where direct 

fixing is not possible 

Silver color 

lacquered 


colour lacquered 

Mounting plate 931.20.439 931.20.430 


Safety lock screw 

For DCL 91 / 92 

• Area of application: To protect cover cap against vandalism 

5 

Cat. No. 

Safety lock screw 931.20.460 




AH 5.20 

Guide rail buffer 

• Area of application: For easier detection of hold open position 

Cat. No. 

Guide rail buffer 931.20.461 






Concealed Door Closers 

DCL 34 

EN 3 

5 





• Area of application: Door closer and guide rail for concealed installation 



• Door width: 

≤950 mm 

• For door thickness: ≥40 mm 



• Mounting: 

For DIN left hand and DIN right hand use 

• Standard: 

Certified in compliance with EN 1154:1996/A1:2002 

• Class: 3 8 3 1 1 3 




DCL 34 set 




Door Closer 


HTH IPI 09/094/03.12.2009/8021 

fi 




AH 5.21



DCL 32 

EN 3 

5 






AH 5.22 


• Installation: 

Suitable for standard installation in door and overhead installation in frame 




≤950 mm 




• Mounting: 


• Standard: 


• Class: 3 8 3 1 1 3 


DCL 32 set 




Door Closer 


HTH IPI 09/094/03.12.2009/8021 

fi 







DCL 33 

EN 2 – 4 

5 







Suitable for standard installation in door and overhead installation in frame 




≤1,100 mm 


• Door weight: 

≤80 kg 



• Mounting: 


• Standard: 


• Class: 

3 8 2 – 4 1 1 3 




DCL 33 set 




Door Closer 


HTH IPI 09/094/03.12.2009/8021 

fi 




AH 5.23

Floor Springs – StarTec 


Including top center set 

5 

• Area of application: For double action doors 

• Version: Optionally with hold open function at an opening angle of 90°, 

replaceable spindle insert, with top centre set 

• Door weight:


DCL 40 

EN 1 – 4 

• Version: Optionally without hold open function or with permanent hold open function at an opening angle of 85°, 90° or 95°, 

safety valve against overloading 

• Adjustment facility: Closing force, closing speed and latching action continuously adjustable 




• Permanent backcheck from approx. 80° 

• Mounting: Suitable for DIN left hand, DIN right hand and double action doors 


• Class: 

4 8 1 – 4 0 1 4 

Cat. No. 

DCL 40 

DCL 40 without hold open function 932.20.000 

DCL 40 hold open angle 90° with double action doors and 85° with single action doors 932.20.001 

DCL 40 hold open angle 95° with double action doors and 90° with single action doors 932.20.002 


Please order cover plate separately. 

5 

Cover plate 

For DCL 40 


• Area of application: For double action doors or edges may be broken off for DIN left hand and DIN right hand use 

• Material thickness: 1 mm 




colored lacquer 

Cover plate 932.20.020 




AH 5.25



Pivot extension 

For DCL 40 floor spring 

• Area of application: To increase the floor clearance 

(e.g. for doors with thresholds or 

floors fitted with carpets) 

• Version: With cylinder screw 

Length 

mm 

Cat. No. 

5 932.20.101 

10 932.20.102 

15 932.20.103 

20 932.20.104 

25 932.20.105 

Top center top part 

• Material: 

• Finish: 

Steel 

Galvanized 

Cat. No. 

Top center top part 932.20.120 

5 

Top center bottom part 

• Material: 

• Finish: 

Steel 

Galvanized 

Cat. No. 

Top center bottom part 932.20.130 



AH 5.26 

Bottom strap 

Sealing compound 

• Material: 

• Finish: 

Steel 

Galvanized 

Cat. No. 

Bottom strap 932.20.140 

• Area of application: For sealing the gap around a floor spring 

• Version: 

Consists of stock solution and hardener 

(2 containers) 

• Contents: 0.7 kg 

Cat. No. 

Sealing compound 932.00.310 






Top center 

For flush doors 

• Material: 


Cat. No. 

Top center set 932.84.901 

Bottom strap 

• Material: Steel 

• Finish: Galvanized 

Cat. No. 


5 


Pivot bearing 




• Finish: Galvanized 

Cat. No. 

Satin finish 981.00.092 



AH 5.27



Top center 


• Material: 

• Finish: 


• Mounting: 

Steel 

Galvanized 

For screw fixing 

For DIN left hand and DIN right hand 

use 

Cat. No. 

Top center 932.20.152 

5 

Bottom strap 


• Material: 

• Finish: 


Steel, drop forged 

Galvanized 


Cat. No. 




AH 5.28 

Cover cap 


For top center 

For bottom strap 

• Area of application: Optionally for top centre or bottom 

strap, for DIN left hand or DIN right hand 

• Material: Aluminium 


anodized EV1 

Cover cap for top center 932.20.309 

Cover cap for bottom strap, DIN left 932.20.319 

Cover cap for bottom strap, DIN right 932.20.329 






Top center 

For rebated doors 

• Material: 

• Finish: 


• Mounting: 

Steel 

Galvanized 


For DIN left hand and DIN right hand 

use 

Cat. No. 

Top center 932.20.150 

Bottom strap 


• Material: 

• Finish: 


Steel, drop forged 

Galvanized 


5 

Cat. No. 



Cover cap 




• Area of application: Optionally for top centre or bottom 

strap, for DIN left hand or DIN right hand 

• Material: Aluminium 

• Finish: 

Silver colored anodized EV1 

DIN left 

DIN right 

Cover cap for top center 932.20.169 932.20.179 

Cover cap for bottom strap 932.20.189 932.20.199 



AH 5.29


Floor Spring Heavy Duty 

Features 

• Tested to EN 1154 

• Tested to confirm with CE requirements 

• For single and double action doors 

• With fix backcheck 


• Optional with hold open device (Not fire related) 



Closing force size 

EN2-EN6 

Door width size 

750-1400 mm 

Max.door weight 

500 kg 

Max.door opening angle Approx. 170° 

Note 

For single action heavy duty doors an intermediate pivot 

hinge is required. For doors up to 2286 mm. height, one hinge 

should be used. For every 762 mm an additional hinge should be added. 

5 

Version 

Cat. No. 

Floor Spring without hold-open 932.86.030 

Floor Spring with hold open at 90° and 120° 932.86.031 


Cover plate 



AH 5.30 

Finish 

Cat. No. 

Stainless steel matt (304) 932.86.940 






Single action door fitting set 

Features 

• Solid grade 316 stainless steel for high carrying 

capacity and excellent corrosion resistance 

• Low friction bearing in top center for enhanced efficiency 

Version 

Cat. No. 

Top center pivot (Stainless steel matt) 932.86.950 

Bottom strap pivot (Stainless steel matt) 932.86.960 


Double action door fitting set 

Features 

• Solid grade 316 stainless steel for high carrying 

capacity and excellent corrosion resistance 

• Low friction bearing in top center for enhanced efficiency 

5 

Version 

Cat. No. 

Stainless steel matt 932.86.932 







AH 5.31


Intermediate pivot 

Features 

• For using in combination with floor spring 

• To prevent bending of very height door 

• Top pivot arm and floor spring arm need to be aligned 

with the hinge centrally with an offset of 16 mm. 

• Material: Aluminum 

Version 

Cat. No. 

Intermediate pivot DIN Left hand 926.51.009 

Intermediate pivot DIN Right hand 926.51.019 


Floor pivot bearing 

Features 


5 

Finish 

Cat. No. 





AH 5.32 

Floor pivot bearing 

Features 


Finish 

Cat. No. 







For aluminum frame constructions 

Transom Door Closer 

Features 

• For single or double action aluminum framed doors 

• Hydraulic latching action valve adjustable 


• With hold-open function 90° 

• With side-load arm angle bracket and floor pivot 



• Closing force size EN2 EN3 EN4 

• Max. door width size 850 mm 950 mm 1,100 mm 

• Max. door weight 80 kg 100 kg 120 kg 

• Max. door opening angle Approx. 130° Approx. 130° Approx. 130° 

5 




Version 

Cat. No. 

Transom door closer EN2 932.79.100 






AH 5.33


Sliding door closers 

Overhead sliding door closer 

Features 

• Surface mounted sliding door closer, for lightweight 

doors only, with closing speed and closing power adjustment 

• For fixing to existing sliding door systems 

• To suit door sizes from 590–900 mm 

• Door opens lightly and closes automatically 

• Shuts out noise, gases, dust etc. saves energy 

• Suits timber or metal doors 

• Max. 40 kg door leaf weight 

Version 

Cat. No. 

Sliding door closer 931.85.009 


5 



AH 5.34 





Accessories 

Door Coordinator 

Features 

• Soffit fixing pattern, suitable for outward opening external doors 

• Ensures pair of rebated meeting stile doors close in the correct 

order 

Finish 

Cat. No. 

Brushed stainless steel 940.23.300 


Rubbing plate for door coordinator 

Finish 

Cat. No. 

Satin stainless steel 931.71.910 


5 


Door Coordinator 



Features 

• In connection with door closer 

• For double-leaf doors 

• Ensures the correct closing sequence of both doors 


Fixing 

• Installation of the door frame 

Finish 

Cat. No. 

Chrome plated 931.97.902 




AH 5.35

Overhead Door Closers – Dorma 

With arm 

TS 68 

EN 2 – 4 

Features 

• Conforms to BS EN 1154 

• Power size 2-4 

• Maximum door width 1100 mm 

• Maximum door weight 80 kg 

• Closing and latch speed adjustable 

• 2 hour Certifire rated to EN 1634-1 

• Universal fixing 

• Cast aluminium body, steel arm assembly 

Silver color 

Cat. No. 

With regular arm 931.07.059 


TS 71 

EN 3 / EN 4 

5 



AH 5.36 

Silver color 

Cat. No. 

With regular arm 931.07.709 


• Version: 

• Adjustment facility: 


With standard arm or interlocking hold open 

arm, hold open function can’t be 

deactivated 

Closing force adjustable through position of 

arm, closing speed continuously 

adjustable, latching action continuously 

adjustable (via arm) 

See TS 83 RF (add the door width) 

• Closing force: 3 or 4 according to EN 1154 

• Opening angle / Hold open angle / mounting: See TS 83 RF 





With arm 

TS 73 V 

EN 2 – 4 



on pull side 



on push side 



• Version: 


Optionally with standard arm or flat form arm 

Suitable for standard installation on pull side and overhead installation on push side, 

suitable for parallel arm installation 

• Adjustment facility: Closing force and closing speed continuously adjustable, 

adjustable, self-regulating backcheck, 

latching action continuously adjustable via arm 






• Class: 4 8 2 – 4 1 1 4 

5 


Version 



Silver colour 

lacquered 

TS 73 V set with standard arm 

1 Overhead door closer with arm 931.06.449 

1 Basic closer – 931.06.319 

1 Standard arm with flat lever – 931.07.459 

TS 73 V set with flat form arm 


1 Basic closer – 931.06.319 

1 Flat form arm – 931.06.069 

Door Closer 


HTH IPI 09/094/03.12.2009/8021 

fi 




AH 5.37


With arm 

TS 83 

EN 3 – 6 



on pull side 



on push side 

5 



• Version: 

Interlocking hold open arm that can be disabled 

• Adjustment facility: Closing force and closing speed continuously adjustable, 

adjustable, self-regulating backcheck, 

latching action continuously adjustable (via arm) 

• Installation: Suitable for standard installation on pull side and overhead installation on push side, 

suitable for parallel arm installation 

• Closing force: 3 – 6 in compliance with EN 1154 



• Hold open angle: up to approx. 150° 




AH 5.38 

Silver 

coloured 

TS 83 RF with interlocking hold open device that can be disabled 


1 Basic closer – 931.06.019 

1 Interlocking hold open arm – 931.06.079 







TS 90 - Impulse Slide Arm 

Features 

• Closing force: 3/4 EN 

• Two independent valves for closing speed adjustment 

(160° – 15° and 15° – 0°) 

• Standard doors ≤ 1100 mm 

• Arm assembly: slide channel 

Cat. No. 

TS 90 Impulse 931.01.089 


5 






AH 5.39



TS 91 with Contour Design 

EN 3 


The use on fire resistant and smoke control doors is permitted 

5 

• Version: 

Optionally with interlocking hold open insert that can be disabled 

• Adjustment facility: Closing speed and latching action continuously adjustable 


• Closing force: 3 in compliance with EN 1154 



• Hold open insert: 75 – 150° 

• Closing effect: ≤180° 




AH 5.40 

Silver 

coloured 

TS 91B set with Contur design 

1 Overhead door closer with guide rail 931.02.009 

1 Basic closer – 931.01.309 

1 Standard rail – 931.01.509 

TS 91B set with interlocking hold open device with Contur design 

1 Overhead door closer with guide rail and 

931.02.019 

interlocking hold open device 

1 Basic closer – 931.01.309 


1 Interlocking hold open device – 931.01.590 








EN 2 – 4 


The use on fire resistant and smoke control doors is permitted 

• Version: 

Optionally with interlocking hold open insert that can be disabled, 

mounting bracket with universal hole system 

• Adjustment facility: Closing force and closing speed continuously adjustable 

• Installation: TS 92 B standard installation on pull side, overhead installation on push side, 

TS 92 G standard installation on push side, overhead installation on pull side 

• Closing force: 2 – 4 in compliance with EN 1154 



• Hold open insert: 75 – 150° 

• Closing effect: From 180° 


5 




Silver 

coloured 

TS 92B set with Contur design 


1 Basic closer B, pull side – 931.01.319 


TS 92G set with Contur design 


1 Basic closer G, push side – 931.01.329 


TS 92B set with interlocking hold open device with Contur design 


931.02.049 


1 Basic closer B, pull side – 931.01.319 



TS 92G set with interlocking hold open device with Contur design 



931.02.059 

1 Basic closer G, push side – 931.01.329 








AH 5.41




EN 2 – 5 




5 

• Version: 

Optionally with interlocking hold open insert that can be disabled, 

mounting bracket with universal hole system 


TS 93 B standard installation on pull side, overhead installation on push side, 

TS 93 G standard installation on push side, overhead installation on pull side 

• Adjustment facility: Closing force, latching action, delayed closing action, closing speed and backcheck continuously 

adjustable 


• Delayed closing action: ≤30 sec. 


≤1,250 mm 

• Opening angle: With standard installation

Door Closers - Dorma 


Mounting plate 

For TS 91 

• Area of application: For mounting door closer to doors where 

direct fixing is not possible 

Silver 

coloured 

Mounting plate 931.00.969 


For TS 91/TS 93 guide rails 

• Area of application: Mounting plate for TS 91/TS 93 guide rails 

Silver 

coloured 


5 






• Area of application: Mounting plate for TS 91/TS 93 guide rails 

Silver 

coloured 




AH 5.43



Glass door shoe Contur design 

For TS 93 

• Area of application: 

• For glass door thickness: 

For mounting door closer to glass 

doors 

10 mm 

Silver 

coloured 

Glass door shoe 931.00.879 

Opening angle restraint 


• Area of application: For retro-fitting in G 91 N and G 93 N guide 

rails 

• Version: Opening zone approx. 80 – 120° 

5 

Cat. No. 

Opening angle restraint for TS 91/TS 93 931.00.791 


The opening angle restraint is no overload protection device and 

does not replace the door stop. 

Interlocking hold open insert 




AH 5.44 


The use on fire resistant and smoke control doors is not 

permitted. 

• Area of application: For retro-fitting in G 91 N and G 93 N guide 

rails, allows doors to be held open without 

any spring-back resilience 

• Version: 

Releasing force adjustable, can be disabled 


Silver 

coloured 

Interlocking hold open insert 931.01.590 





Concealed door closers 

ITS 96 N 

EN 2 – 4 




• Version: 

With mechanical opening angle restraint, with standard pivot 

• Adjustment facility: Closing force, closing speed and latching action continuously adjustable 





• Rebate clearance: 8 and 12 mm 

• Mounting: Non–handed 


• Class: 3 8 2 – 4 1 1 4 

5 




Cat. No. 

ITS 96 N set 

1 Concealed door closer with guide rail 931.04.170 


Other rebate clearance dimensions on request. 



AH 5.45


Accessories for concealed door closers 


For G 96 N20 guide rail 



permitted. 

• Version: 

Engaging and releasing force adjustable 

• Area of application: For retro-fitting in G 96 N20 guide rail 


• Suitable for: Rebate clearance 8 and 12 mm 

Cat. No. 


5 


For G 96 N guide rail 



permitted. 

• Version: 

Engaging and releasing force adjustable, 

can be enabled and disabled 

• Area of application: For retro-fitting in G 96 N guide rail 


• Suitable for: Rebate clearance 8 and 12 mm 

Cat. No. 




AH 5.46 





Floor Springs 

Floor Spring BTS 65 

EN 3–4 


• Version: 

Optionally with hold open 

function at an opening angle 

of 90°, replaceable spindle 

insert, with top centre set 

• Door weight: 

≤100 kg 


≤950 mm 


• Material: 

Cover plate: Stainless steel 

• Finish: 

Cover plate: Satin finish 

• Mounting: 

Suitable for DIN left hand, 

DIN right hand and double 

action doors 


Cat. No. 

BTS 65 EN 3-4 932.00.071 

Packing: 1 set 

5 

Dorma Floor Spring BTS 75 V 


50 

105 

82 

308 



285 

Features 

• Spring strength EN 1–4 

• Closing speed variable by valve adjustment 

(175° – 15° and 15° – 0°) 

• Max. leaf weight 120 kg 


• Hold point 90° and 105° 

• Cover plates included 

Cat. No. 

BTS 75 EN 1–4, HO 90° 932.00.064 

BTS 75 EN 1–4, HO 105° 932.00.065 




AH 5.47

Floor Springs – Dorma 


Features 

• Spring strength EN 4 

• Closing speed variable by valve adjustment 

(130° – 20° and 130° – 0°) 



• Hold point 90° 

Cat. No. 

40 

BTS 84 EN 4 932.00.081 

108 

306 


324 

130 

5 


60 

105 

78 



358 

341 

Features 

• Spring strength EN 3,4 or 6 



• Non-handled, suitable for single and double action doors 

• Closing speed adjustable by valve (175° - 0°) 

• Backcheck, mechanical 

• Delay action adjustable by valve (selectable alternative to 

the hold-open feature) 

• Hold-open feature adjustable (max. 175°) 

• Cover plates included 

Cat. No. 

BTS 80 EN 3 932.00.093 

BTS 80 EN 4 932.00.094 

BTS 80 EN 6 932.00.096 



AH 5.48 


Call +632 571 3683 - Manila • +6332 345 3672 - Cebu



Pair of 7411/K 56 top centers 



• Version: 


• Mounting: 


For adjustment of installed door 

(adjustment ±2 mm) 


For DIN left hand and DIN right 

hand use 

Cat. No. 

Pair of top centers 932.00.420 

7411/56 Bottom strap 


• Area of application: For flush doors 

• Version: 

Drop forged 

• Installation: For screw fixing 

• Finish: 

Galvanized 


Cat. No. 


5 


Cover cap 


Cover disc 




• Area of application: For flush doors, optionally for 

pair of top centres (2-piece) or bottom strap 

(1-piece) 

• Version: 

For bottom strap, optionally for DIN left hand 

or DIN right hand 

Cat. No. 

Cover cap for pair of top centres 932.00.509 

Cover cap for bottom strap DIN left hand 932.00.529 

Cover cap for bottom strap DIN right hand 932.00.519 

• Area of application: For bottom strap 

• Material: Rustproof stainless steel 

Cat. No. 

Cover disc 932.00.460 



AH 5.49



7421 N Bottom strap 

For double action doors 


• Version: 

Drop forged 

• Installation: For screw fixing 

• Finish: 

Galvanized 


Cat. No. 


5 

8066 Top centre, adjustable, with pins 

For double action doors 


• Version: 

Top part with adjustable pivot for 

compensating rebate clearance dimensions 

of up to max. 20 mm, bottom part with pins 

• Installation: Routing the base profile is not necessary 

• Finish: 

Galvanized 


Cat. No. 

Top center set consisting of 932.00.620 

Top centre top part 932.00.600 

Top centre bottom part 932.00.610 



AH 5.50 

8064 Cover plate 

For top center top part 

• Area of application: For top centre top part 


Cat. No. 







Spindle insert 

For BTS 80 

• Area of application: To increase the floor clearance 

(e.g. for doors with thresholds or floors 

fitted with carpets) 

• Version: 

Flat conical 

• Mounting: Suitable for DIN left hand or DIN right hand 

Length L 

mm 

Cat. No. 

0 (standard) 932.00.100 

5 932.00.101 

10 932.00.103 

15 932.00.105 

20 932.00.106 

25 932.00.107 


Other lengths on request (up to max. 50 mm). 

Pivot bearing 

• Version: 

Optionally with ball bearing or angular 

ball bearing 

• Load bearing capacity: Ball bearing ≤200 kg, 

angular ball bearing ≤300 kg 

5 

Cat. No. 

Pivot bearing with ball bearing 932.00.300 

Pivot bearing with angular ball bearing 932.00.301 


Cover plate 




• Area of application: For pivot bearing 


Cat. No. 




AH 5.51

Overhead Overhead Door Closers – Dorma 

Porteo Automatic door operator 

Automatic door operator Dorma Porteo 

5 



AH 5.52 

Door leaf installation/ 

pull side 

Door leaf installation/ 

push side 

Transom fixing/ 

push side 

Transom fixing/ 

pull side 

• Version: 

Plug-and-go complete solution package, 

low installation height, for use with manual 

switch and/or hand transmitter (optional) 

• Installation: Standard installation or overhead 

installation on pull side or push side possible 

• Adjustment facility: Closing speed continuously adjustable 




• Input voltage: 230 V AC 

• Nominal voltage: 24 V DC 

• Degree of protection: IP 20 

• Standard: Tested to DIN 18650 

• Mounting: 


• Maintenance contract not required 

Standard functional programmes 

• PowerLess: Door can be openend manually 

“without muscle power”. 

• Push&Go: Door automatically opens after reach 

ing 3° by an initial manual opening 

action and automatically closes after a 

preset hold-open time. 

• PowerMotion: Door automatically opens using a 

pulse generator (manual switch, hand 

transmitter) and automatically closes 

after a preset hold-open time. 

• PermanentOpen: Door automatically opens and remains 

open until the programm is changed. 

This function can also be controlled 

via a pulse generator (manual switch, 

hand transmitter). 

Porteo automatic door operator 

1 Overhead door closer with 

guide rail 

Silver 

coloured 

935.03.009 





Accessories for Porteo automatic door operator 

Mounting plate 30 mm 

• Area of application: Mounting plate for Porteo guide 

rail 

Height 

mm 

Silver 

coloured 

Mounting plate 30 935.03.019 

Mounting plate 40 mm 

• Area of application: Mounting plate for Porteo guide 

rail 

Height 

mm 

Silver 

coloured 

Mounting plate 40 935.03.029 

5 

Soffit fixing bracket 

• Area of application: For mounting the Porteo guide 

rail on door frame with deep 

soffit 

• For soffit depths from -20 up to 200 mm 


Glass door shoe 



Silver 

coloured 

Soffit fixing bracket 935.03.039 


For mounting door 

closer to glass doors 

• For glass door thickness: 8 – 10 mm 


Only suitable for transom 

fixing 

Silver 

coloured 

Glass door shoe 935.03.049 



AH 5.53


Accessories for Porteo automatic door operator 

Cable transition 

• Area of application: For protecting the electric cable 

between the door frame and 

the door leaf, for leading flexible 

cables through 

Cat. No. 

Cable transition 935.03.060 

Manual switch 

• Area of application: For push-button controlled door opening 

activation 

• Installation: Flush mounting 

Cat. No. 

Manual switch 935.03.070 


If pulse generators (manual switch, hand transmitter) are used, 

an electric strike must also be installed. 

Electric strike not supplied, please order separately. 

5 

Hand transmitter 

• Version: 

With 4 push buttons, 

with 2 channels (frequency 433.92 MHz) 

• Area of application: For remote controlled door opening activation 

• Material: Plastic 

• Colour: 

Black 

• Range: 

15 m within the building 

• Including batteries (12V) 

Cat. No. 

Hand transmitter 935.03.071 



AH 5.54 

Receiver 


If pulse generators (manual switch, hand transmitter) are used, 

an electric strike must also be installed. 

Electric strike not supplied, please order separately. 

• Version: 

Self-learning capability, 

with 1 channel (frequency 433.92 MHz) 

• Area of application: Receiver board for hand transmitter 

Cat. No. 

Receiver 935.03.072

CHAPTER 5 - Hafele

Create successful ePaper yourself

Delete template?

Save as template?