Lika Electronic September 2014 Newsletter in English
Featured this month: SSI to Profibus IF55 gateway, designed to convert any Lika SSI serial encoder into a Profibus-DP slave http://www.lika.it/eng/prodotti.php?id_cat=264 . New analogue outputs (0-10V voltage and 4-20 current outputs) for SFP series cable-pulling encoders http://bit.do/Lika- Draw-Wire-Range
Featured this month: SSI to Profibus IF55 gateway, designed to convert any Lika SSI serial encoder into a Profibus-DP slave http://www.lika.it/eng/prodotti.php?id_cat=264 . New analogue outputs (0-10V voltage and 4-20 current outputs) for SFP series cable-pulling encoders http://bit.do/Lika- Draw-Wire-Range
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>2014</strong><br />
<strong>September</strong><br />
Smart encoders & actuators<br />
SSI to Profibus IF55 gateway<br />
Connect your <strong>Lika</strong> SSI encoder to Profibus with the new IF55 gateway. IF55 gateway allows<br />
complete <strong>in</strong>tegration and full compliance with the Profibus-DP protocol.<br />
What is IF55?<br />
IF55 is the new gateway from <strong>Lika</strong> <strong>Electronic</strong> designed<br />
to convert any <strong>Lika</strong> SSI serial encoder <strong>in</strong>to a Profibus-DP<br />
slave. The slave encoder can be configured as<br />
a Class 1, Class 2 or Class 2(+VEL) device, thus ga<strong>in</strong><strong>in</strong>g<br />
enhanced functions such as scal<strong>in</strong>g, extended diagnostics,<br />
velocity <strong>in</strong>formation. Whether your SSI device<br />
is a s<strong>in</strong>gleturn or multiturn rotary encoder or a l<strong>in</strong>ear<br />
sensor, then you can easily and reliably connect it to<br />
the fieldbus network. IF55 gateway fully complies with<br />
the Profibus-DP protocol.<br />
A complete range<br />
IF55 gateway is also available with EtherCAT <strong>in</strong>terface<br />
comply<strong>in</strong>g with ETG.1000 specifications and<br />
support<strong>in</strong>g CoE (CANopen over EtherCAT) and FoE (for<br />
firmware upgrade) protocols and the EtherCAT State<br />
Mach<strong>in</strong>e; and with CANopen <strong>in</strong>terface comply<strong>in</strong>g<br />
with the “Device Profile for encoders” Class 2. IF55<br />
converters use connectors and cables that meet the<br />
protocol specifications.<br />
Why to use IF55?<br />
There are many good reasons why IF55 gateway is of a<br />
great benefit. First, <strong>in</strong> the case of a plant retrofit project,<br />
<strong>in</strong>stead of be<strong>in</strong>g discarded an exist<strong>in</strong>g SSI serial <strong>in</strong>terface<br />
encoder can be converted and reused <strong>in</strong> a more<br />
modern and <strong>in</strong>tegrated communication system.<br />
Furthermore, because of its electronics, a bus encoder<br />
has larger dimensions than a SSI model and comes<br />
from 58 mm flange design up. Today it is f<strong>in</strong>ally<br />
possible to <strong>in</strong>stall even a small encoder (Ø 36 mm!) or<br />
a m<strong>in</strong>imum footpr<strong>in</strong>t head sensor <strong>in</strong> tight spaces not<br />
giv<strong>in</strong>g up the Profibus technology. In addition there is<br />
no need to make any change either <strong>in</strong> the hardware or<br />
<strong>in</strong> the software of the SSI encoder, only the converter<br />
needs few simple parameters to be programmed.<br />
Perfect for:<br />
• s<strong>in</strong>gleturn and multiturn rotary encoders<br />
(for example MS36, MM36, AM36, AM58)<br />
• l<strong>in</strong>ear encoders (for example SMA5, SMA2)<br />
• bear<strong>in</strong>gless encoders (for example SMRA)<br />
• Fully comply<strong>in</strong>g with Profibus-DP<br />
• device configurable as a Class 1, Class 2 or Class<br />
2(+VEL) slave<br />
• connectors and cables accord<strong>in</strong>g to Profibus specifications
<strong>2014</strong><br />
<strong>September</strong><br />
Smart encoders & actuators<br />
SFP draw-wire encoders ga<strong>in</strong> analogue outputs<br />
<strong>Lika</strong> <strong>Electronic</strong> is releas<strong>in</strong>g new SFP series cable-pull<strong>in</strong>g encoders that provide l<strong>in</strong>ear position<br />
feedback over distances from 300 mm / 11.8” to 2000 mm / 78.7” and analogue outputs now.<br />
Customers can now benefit through more choice <strong>in</strong><br />
the range of cable pull<strong>in</strong>g measur<strong>in</strong>g solutions to select<br />
from. <strong>Lika</strong> <strong>Electronic</strong> is <strong>in</strong>troduc<strong>in</strong>g two further<br />
output signal options <strong>in</strong> the SFP draw wire units series:<br />
4-20mA current output and 0-10V voltage<br />
output. Analogue models come to complement the 1<br />
to 20 kΩ potentiometer selection.<br />
Compact and robust, SFP str<strong>in</strong>gpots have a rugged alum<strong>in</strong>ium<br />
hous<strong>in</strong>g and use a reliable sta<strong>in</strong>less steel draw<br />
wire mechanism. They are protected to IP64 and can<br />
operate <strong>in</strong> ambient temperatures from -25°C to +85°C<br />
(-13°F +185°F). They are available <strong>in</strong> five measur<strong>in</strong>g<br />
ranges: 300 mm / 11.8”, 500 mm / 19.7”, 1000<br />
mm / 39.4”, 1500 mm / 59” and 2000 mm / 78.7”<br />
and allow for wide cable misalignments. Aimed at l<strong>in</strong>ear<br />
measurement applications across all <strong>in</strong>dustries with<br />
medium-short displacements and limited space, they<br />
are well matched to telescopic systems and hydraulic<br />
pistons (for <strong>in</strong>stance <strong>in</strong> mobile equipment such as outriggers,<br />
stabiliz<strong>in</strong>g slides, telescopic cranes, booms ...),<br />
forklifts, pr<strong>in</strong>t<strong>in</strong>g mach<strong>in</strong>es, medical technology applications<br />
such as <strong>in</strong> exam<strong>in</strong>ation tables, dentist’s chairs<br />
and laboratory test<strong>in</strong>g devices, among others. Furthermore<br />
they are a cost-effective alternative to the l<strong>in</strong>ear<br />
potentiometers <strong>in</strong> applications where reliable and lowcost<br />
position verification is required.<br />
<strong>Lika</strong> <strong>Electronic</strong> offers a full l<strong>in</strong>e of “cable pull<strong>in</strong>g” measur<strong>in</strong>g<br />
solutions <strong>in</strong>clud<strong>in</strong>g str<strong>in</strong>gpots (potentiometers)<br />
as well as <strong>in</strong>cremental, absolute, fieldbus, Ethernet and<br />
ATEX draw-wire encoders.<br />
Pick from the comprehensive list at http://bit.do/<strong>Lika</strong>-<br />
Draw-Wire-Range