Surprisingly simple. - Hilti

Hilti solutions for
fastening piping
Channel system
Pipe rings
Pipes can be fitted and positioned quickly and easily, with higher productivity,
thanks to the innovative click-together connector system – the connectors
hold securely in the channel with an audible “click”. The channel
profile and connectors are serrated for a reliable hold.
MM-C-16 to 36 installation channel
Practical pipe rings for fastening drinking water, heating and waste water
pipes.
MP-LHI pipe ring
With short connecting boss for installation close to
walls or ceilings.
MM-ST M8 or M10 T-head bolt
MPN-LI pipe ring
With safety click locking system for quick, easy
closure and thus less tiring overhead installation.
MP-HI pipe ring
In a range covering all pipe sizes. With M8/M10
combo connection boss.
MM-S M8 or M10 pipe ring saddle
MM-CW M8 or M10 channel washer
MPN-RC pipe ring
With an additional rib in the center of the rubber
insert for easy pipe adjustment without risk of the
insert falling out.
MIP refrigeration pipe ring
For quick, easy initial installation of the pipe thanks
to single-screw safety click closure. No application
of sealant required.
Hilti, of course, also supplies accessories such as threaded rods, washers
and nuts.
Anchor fastening
HUS-P 6 and HUS-H 6 screw anchor with the
SID 144-A cordless impact screwdriver
Drill, drive – job done! The reliable concrete screw
anchors with attractive head design.
Can be driven very quickly in concrete with the
Hilti SID 144-A.
HST stud anchor
For highest load values under tension and shear.
Quick and easy to set, ideal for installing through
in-place parts.
HIT-HY 70 injectable adhesive mortar with
HIT-V anchor rod
Reliable, approved fastening system for use in
uncracked concrete and masonry. Allows various
depths of embedment in conjunction with
extendible mesh sleeves.
Further details about tools and consumables, other products and ordering information can be found in the Hilti catalog or online at www.hilti.com/piping
17