datasheet
datasheet
datasheet
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Technical Specifications<br />
General<br />
Designed for Windows NT <br />
Version 4.0.<br />
System delivered fully configured on<br />
a single PC.<br />
Typical PC configuration:<br />
1 DTA10B board<br />
1 to 16 COM ports<br />
LAN interface according to requirements<br />
API<br />
Studio API<br />
Supports XML, DCOM.<br />
Optional SMIL publisher system.<br />
Configuration API<br />
Supports DCOM.<br />
Factum also provides a client application<br />
along with the DBS100.<br />
Log API<br />
Supports DCOM, SNMP<br />
Factum also provides a client application<br />
along with the DBS100.<br />
PAD<br />
Support for up to 16 independent<br />
PAD inserters via RS232 serial ports.<br />
The protocol is compliant with the<br />
IRT recommendation with extended<br />
support up to 64 Kbit/s.<br />
Delay synchronous mode < 4 ms<br />
Frame accuracy better than 500 ms<br />
Supports: MOT, DLS<br />
Packet mode data<br />
Transport interfaces:<br />
. STI according to EN 300 797<br />
V.1.1.1, May 1998<br />
. ETI according to ETS 300 799,<br />
June 1997<br />
Data encoded formats:<br />
.<br />
MOT<br />
MOT-DO<br />
Network independent WG1/WG2,<br />
X.21, G.703<br />
Network adapted G.704<br />
Up to 2.048 Mbit/s output data rate<br />
Supports ATM traffic classes CBR,<br />
VBR, UBR, ABR<br />
FACTUM ELECTRONICS AB<br />
Teknikringen 1C<br />
S-583 30 Linköping, SWEDEN<br />
Phone: +46 13 36 86 00<br />
Fax: +46 13 36 86 01<br />
E-mail: info@factel.se<br />
www.factel.se
Change language