03.10.2014 Views

Render and mortar - Optolith

Render and mortar - Optolith

Render and mortar - Optolith

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>Render</strong> <strong>and</strong> <strong>mortar</strong> |<br />

PPK S<br />

• High aesthetics of brick<br />

surfaces<br />

• The possibility of correcting<br />

the position of the block<br />

vertically<br />

• Universal application<br />

• Long time of treatment<br />

Number of product<br />

Thin-layer white <strong>mortar</strong> with supporting grain<br />

Packaging<br />

Opakowań<br />

na palecie<br />

611314-OPT-000-000-2531 25 kg 48 szt.<br />

Usage<br />

12 cm – 2,5 kg/m²<br />

18 cm – 3,0 kg/m²<br />

24 cm – 3,5 kg/m²<br />

30 cm – 4,0 kg/m²<br />

<strong>Optolith</strong> PPK S is a factory mixed, dry, white <strong>mortar</strong> used as thin-layer <strong>mortar</strong> for gas-concrete blocks <strong>and</strong> silicate in blade-inlet<br />

joint systems as well as smooth blocks. Thanks to the use of supporting grains it is possible to maintain adequate thickness of the<br />

weld <strong>and</strong> correcting the position of the block also vertically.<br />

PPK F<br />

• High aesthetics of brick<br />

surfaces<br />

• Possiblity of using <strong>mortar</strong>s at<br />

temperatures below zero<br />

• Universal application<br />

• Long time of treatment<br />

Number of product<br />

Packaging<br />

Winter, thin-layer white <strong>mortar</strong><br />

Opakowań<br />

na palecie<br />

611313-OPT-000-000-2531 25 kg 48 szt.<br />

Usage<br />

12 cm – 2,5 kg/m²<br />

18 cm – 3,0 kg/m²<br />

24 cm – 3,5 kg/m²<br />

30 cm – 4,0 kg/m²<br />

<strong>Optolith</strong> PPK F is a factory mixed, dry, white, thin-layer <strong>mortar</strong> for gluing gas-concrete blocks <strong>and</strong> silicate in blade-inlet joint systems<br />

as well as smooth blocks. Thanks to a special composition of the mixture it can be machined at the temp to -6 ° C, assuming<br />

that the temperature in the next 6 hours does not fall below -12 ° C.<br />

| 9

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!