2011 Collection - Ironmonger
2011 Collection - Ironmonger
2011 Collection - Ironmonger
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2 .<br />
Finishes<br />
Lever handle<br />
Pull handles<br />
Push plates<br />
14
SS<br />
Satin Stainless Steel (316). Polished Stainless Steel (316).<br />
PS<br />
The Modric range of door funiture was<br />
conceived in 1965 on the basis of a<br />
dimensionally and asethetically<br />
co-ordinated range of items to allow<br />
maximum interchangeability.<br />
The principle of modular unsprung<br />
components was revolutionary and Modric<br />
soon became a design classic.<br />
Through continuous development to the<br />
range, Modric today represents a timeless,<br />
clean-cut range of door funiture available in<br />
a number of metallic finishes. Products are<br />
hand finished to provide the very best quaility<br />
available. Modric is known for fine design and<br />
extraordinary durability.
Finishes<br />
GT<br />
PVD Gold on Polished Stainless Steel (316).<br />
BF<br />
Simulated Bronze.<br />
MA<br />
Modric Anodised Aluminium.
3502<br />
Modric lever handles on concealed Quadaxial<br />
fixing roses.<br />
Finishes: SS • PS • GT • BF • MA<br />
3503<br />
Modric lever handles on concealed Quadaxial<br />
fixing roses.<br />
Finishes: SS • PS • GT • BF • MA<br />
3<br />
3<br />
52<br />
52<br />
19<br />
19<br />
50<br />
50<br />
127<br />
127<br />
3<br />
3<br />
52<br />
52<br />
19<br />
19<br />
50<br />
50<br />
125<br />
125<br />
3502D<br />
As above but with extra projection from the<br />
door.<br />
Finishes: SS • PS • GT • BF • MA<br />
The unique feature of Allgood lever<br />
handles is the Quadaxial rose assembly.<br />
This provides a corrosion resistant,<br />
maintenance free solution.<br />
All Modric lever sets have independent<br />
test evidence to BS EN 1906, classification<br />
.4 7–1140U<br />
3<br />
65<br />
19<br />
50<br />
48<br />
140
Lever handles<br />
3504 3506 3512<br />
Modric lever handles on concealed Quadaxial<br />
fixing roses.<br />
Finishes: SS • PS • GT • BF • MA<br />
Modric lever handles on concealed Quadaxial<br />
fixing roses.<br />
Finishes: SS • PS • GT • BF • MA<br />
Modric lever handles on concealed Quadaxial<br />
fixing roses.<br />
Finishes: SS • PS • GT • BF • MA<br />
3<br />
60<br />
22<br />
3<br />
3<br />
55<br />
55<br />
3<br />
54<br />
22<br />
137<br />
133<br />
133<br />
136<br />
50<br />
11<br />
22<br />
22<br />
50<br />
50<br />
22<br />
50
3515 3520<br />
Modric lever handles on concealed Quadaxial<br />
fixing roses.<br />
Finishes: SS • PS • GT • BF • MA<br />
Modric lever handles on concealed Quadaxial<br />
fixing roses.<br />
Finishes: SS • PS • GT • BF<br />
3<br />
58<br />
115<br />
3<br />
348<br />
48<br />
135<br />
135<br />
12<br />
12<br />
24<br />
50<br />
22<br />
50 22<br />
50<br />
25<br />
25<br />
12.5<br />
12.5<br />
The unique feature of Allgood lever<br />
handles is the Quadaxial rose assembly.<br />
This provides a corrosion resistant,<br />
maintenance free solution.<br />
All Modric lever sets have independent<br />
test evidence to BS EN 1906, classification<br />
.4 7–1140U
Lever handles<br />
3530<br />
Modric lever handles on concealed Quadaxial<br />
fixing roses.<br />
Finishes: SS • PS • GT • BF<br />
3540<br />
Modric lever handles on concealed Quadaxial<br />
fixing roses.<br />
Finishes: SS • PS • GT • BF<br />
3<br />
350<br />
50<br />
28<br />
28<br />
19<br />
19 50<br />
50<br />
137<br />
137<br />
16<br />
16<br />
28<br />
28<br />
3<br />
45<br />
3<br />
45<br />
25<br />
25<br />
18<br />
50<br />
18<br />
50<br />
135<br />
135<br />
10<br />
10<br />
28<br />
28<br />
16<br />
16
3550<br />
Modric lever handles on concealed Quadaxial<br />
fixing roses.<br />
Finishes: SS • PS • GT • BF<br />
3560<br />
Modric lever handles on concealed Quadaxial<br />
fixing roses.<br />
Finishes: SS • PS • GT • BF<br />
3<br />
3<br />
57<br />
57<br />
3<br />
3<br />
57<br />
57<br />
20<br />
20<br />
146<br />
146<br />
20<br />
20<br />
146<br />
146<br />
20<br />
20 50<br />
50<br />
20<br />
20<br />
50<br />
50<br />
The unique feature of Allgood lever<br />
handles is the Quadaxial rose assembly.<br />
This provides a corrosion resistant,<br />
maintenance free solution.<br />
All Modric lever sets have independent<br />
test evidence to BS EN 1906, classification<br />
.4 7–1140U
Lever handles<br />
3570<br />
Modric lever handles on concealed Quadaxial<br />
fixing roses.<br />
Finishes: SS • PS • GT • BF<br />
3<br />
59<br />
130<br />
20<br />
20<br />
50
6594 6594C<br />
Modric pull handle with bolt through fixings.<br />
400mm centres.<br />
Finishes: SS • PS • GT • BF • MA<br />
Modric cranked pull handle with bolt through<br />
fixings. 400mm centres.<br />
Finishes: SS • PS • GT • BF • MA<br />
6594BB<br />
Pair, as above, with back-to-back fixings.<br />
6594CBB<br />
Pair, as above, with back-to-back fixings.<br />
6597 6597C<br />
Modric pull handle as per 6594 but with<br />
600mm centres.<br />
Modric cranked pull handle as per 6594C but<br />
with 600mm centres.<br />
6597BB<br />
Pair, as above, with back-to-back fixings.<br />
6597CBB<br />
Pair, as above, with back-to-back fixings.<br />
419/619<br />
400/600<br />
419/619<br />
400/600<br />
19 70<br />
90<br />
19<br />
63<br />
Other lengths available to special order.<br />
Please note, the maximum recommended<br />
fixing centres for handles utilising<br />
two fixings is 1200mm. Please contact<br />
Allgood for specification advice.
Pull handles<br />
6584L/R<br />
Modric pull handle with bolt through fixings.<br />
380mm centres (diagonal). STATE HAND.<br />
Right hand shown.<br />
Finishes: SS • PS • GT • BF • MA<br />
6584BBL/R<br />
Pair, as above, with back-to-back fixings.<br />
1720<br />
Modric pull handle with bolt through fixings.<br />
400mm centres.<br />
Finishes: SS • PS • GT • BF<br />
1720BB<br />
Pair, as above, with back-to-back fixings.<br />
1730<br />
Modric pull handle with bolt through fixings.<br />
400mm centres.<br />
Finishes: SS • PS • GT • BF<br />
1730BB<br />
Pair, as above, with back-to-back fixings<br />
6588L/R<br />
Modric pull handle as per 6584L/R but with<br />
579mm centres (diagonal). STATE HAND.<br />
Right hand shown.<br />
6588BBL/R<br />
Pair, as above, with back-to-back fixings.<br />
1721<br />
Modric pull handle as per 1720 but with<br />
600mm centres.<br />
1721BB<br />
Pair, as above, with back-to-back fixings.<br />
1731<br />
Modric pull handle as per 1730 but with<br />
600mm centres.<br />
1731BB<br />
Pair, as above, with back-to-back fixings<br />
400/600<br />
500/750 400/600<br />
500/750 400/600<br />
38<br />
60<br />
22<br />
57<br />
25<br />
59<br />
28 61<br />
12.5<br />
16
1740<br />
Modric pull handle with bolt through fixings.<br />
400mm centres.<br />
Finishes: SS • PS • GT • BF<br />
1750<br />
Modric pull handle with bolt through fixings.<br />
400mm centres.<br />
Finishes: SS • PS • GT • BF<br />
1740BB<br />
Pair, as above, with back-to-back fixings<br />
1750BB<br />
Pair, as above, with back-to-back fixings<br />
1741<br />
Modric pull handle as per 1740 but with<br />
600mm centres.<br />
1751<br />
Modric pull handle as per 1750 but with<br />
600mm centres.<br />
1741BB<br />
Pair, as above, with back-to-back fixings<br />
1751BB<br />
Pair, as above, with back-to-back fixings<br />
10<br />
500/700 400/600<br />
500/700 400/600<br />
Other lengths available to special order.<br />
Please note, the maximum recommended<br />
fixing centres for handles utilising<br />
two fixings is 1200mm. Please contact<br />
Allgood for specification advice.<br />
25<br />
55<br />
19<br />
63
Pull handles and push plates<br />
1760<br />
Modric pull handle with bolt through fixings.<br />
400mm centres.<br />
Finishes: SS • PS • GT • BF<br />
1770<br />
Modric pull handle with bolt through fixings.<br />
400mm centres.<br />
Finishes: SS • PS • GT • BF<br />
6801G<br />
Modric push plate. 450x76x1.5mm.<br />
Finishes: SS • PS • GT • BF • MA<br />
1760BB<br />
Pair, as above, with back-to-back fixings<br />
1770BB<br />
Pair, as above, with back-to-back fixings<br />
6801J<br />
Modric push plate. 630x76x1.5mm.<br />
Finishes: SS • PS • GT • BF • MA<br />
1761<br />
Modric pull handle as per 1760 but with<br />
600mm centres.<br />
1771<br />
Modric pull handle as per 1770 but with<br />
600mm centres.<br />
1761BB<br />
Pair, as above, with back-to-back fixings<br />
1771BB<br />
Pair, as above, with back-to-back fixings<br />
500/700 400/600<br />
419/619<br />
400/600<br />
450/630<br />
19<br />
67<br />
19<br />
65<br />
76<br />
1.5
2 .<br />
Finishes<br />
Lever handles<br />
Pull handles<br />
Push plates<br />
16-17<br />
18-23<br />
24-27<br />
27<br />
modric Inc,<br />
National Headquarters,<br />
P.O.Box 1639<br />
Arboles<br />
Colorado 81121<br />
t. 800-739-0202<br />
f. 800-813-2128<br />
e. Info@modric.net<br />
15