AIR HOSES
AIR HOSES
AIR HOSES
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SPECIAL HARDWARE<br />
FILTERS, REGULATORS, GAUGES<br />
IN-LINE WATER SEPARATOR<br />
AND <strong>AIR</strong> FILTER<br />
● Removes water and foreign particles from<br />
compressed air stream.<br />
● Attaches directly to paint spray gun or air tool.<br />
● Reservoir accumulates water on a daily basis.<br />
● Filter can be removed and cleaned periodically.<br />
● 1/4" female (outlet).<br />
Part No.<br />
213235<br />
BAYONET <strong>AIR</strong>LINE GAUGE<br />
The FIRST Single Replacement Cartridge Airline Gauge<br />
VALVE and GAUGE are Combined in<br />
ONE REPLACEMENT CARTRIDGE<br />
Measures from 10lbs. to 200 lbs. in 2 lb. increments!<br />
Magnifying lens -<br />
thin line indicator ring<br />
allows view of scale.<br />
Complete<br />
with dual<br />
head chuck<br />
(full swivel).<br />
Lever Action<br />
1/4’’ STANDARD<br />
<strong>AIR</strong> LINE REGULATOR<br />
● For General Purpose applications.<br />
● Ideal where pressure must be held constant.<br />
Part No. 813165<br />
MADE IN USA<br />
Part No.<br />
113761<br />
1/4’’ STANDARD <strong>AIR</strong> LINE FILTER<br />
● 2 stage filtration - cyclone separation & residual<br />
filtration.<br />
● Removes impurities such as scale, dirt & moisture.<br />
● Clear transparent bowl permits inspection at a<br />
glance.<br />
● Plastic bowl and metal guard.<br />
LIMITED WARRANTY<br />
This product is covered by a limited warranty for repair only<br />
for 1 year from date of purchase. This is the manufacturer’s<br />
policy and only applies to units that are defective in materials<br />
or workmanship. Units that have been abused or are beyond<br />
the 1 year warranty may not be returned for repair. With proper<br />
care this item will provide long and trouble free service.<br />
REPLACEMENT PARTS<br />
WHIP HOSE ASSEMBLY<br />
Part No.<br />
113757<br />
2’’ PRESSURE GAUGE 1/4’’ BACK<br />
● Unbreakable lens.<br />
● Corrosion resistant.<br />
● For air, oil, gas & water service.<br />
Part No. 813166<br />
Complete with dual head chuck and 15’’ hose<br />
3/8-24 thread. Replaces hose and chuck on<br />
813165 and 813166.<br />
Part No.<br />
113756<br />
GAUGE CARTRIDGE Part No. 813164<br />
For inflator gauge #813165.<br />
INFLATOR GAUGE (Bayonet Type)<br />
Part No.<br />
813167<br />
VALVE CARTRIDGE Part No. 813171<br />
For inflator gauge #813165.<br />
Reads from 10 lbs. to 120 lbs, graduations. Complete with dual head chuck. Nylon<br />
indicator bar with large black letters is easy to read and will not rust or corrode.<br />
B11-2<br />
REVISED DECEMBER, 2004<br />
© Copyright 2008. All rights reserved.<br />
No portion may be copied or reproduced in any manner.