We are transfluid®. - transfluid® tube processing machines
We are transfluid®. - transfluid® tube processing machines
We are transfluid®. - transfluid® tube processing machines
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
The <strong>machines</strong> must be extremely robust, especially when handling large<br />
<strong>tube</strong> diameter, if they <strong>are</strong> to be capable of <strong>processing</strong> thick walled and<br />
thin walled pipes and, at the same time, achieve radii of 1.5 x D or smaller.<br />
This also requires sophisticated machine and controll technology.<br />
These <strong>machines</strong> <strong>are</strong> sometimes used for single pipe bending, with a need for<br />
fast tool changing. The setting-up time can be a major factor and is between<br />
10 and 25 minutes for pipe diameters ranging from 120 mm to 325 mm.<br />
DB 20120-CNC<br />
20 -120 mm Ø<br />
partially | fully electric<br />
DB 40139-CNC<br />
40 -140 mm Ø<br />
partially electric<br />
»<br />
Servo-electrically<br />
DB 630-CNC-SE<br />
driven<br />
with four stack dies<br />
DB 40168-CNC<br />
DB 40220-CNC<br />
DB 60275-CNC<br />
DB 80330-CNC<br />
40 -168 mm Ø<br />
40 - 220 mm Ø<br />
60 - 275 mm Ø<br />
80 - 325 mm Ø<br />
partially electric<br />
partially electric<br />
partially electric<br />
partially electric<br />
Fully automatic CNC mandrel bending <strong>machines</strong><br />
Robust, fast and simple to operate, our transfluid CNC bending<br />
<strong>machines</strong> use the most modern technology to offer limitless bending<br />
freedom. Highly flexible, powerful and, thanks to their very short<br />
setting-up times, extremely fast. For radii down to less than 1 x<br />
diameter and, depending on your needs, fully or partially electrically<br />
driven. That is technology to meet the most exacting requirements.<br />
Equipment options:<br />
push bending, right/left bending, centerline booster,<br />
multiple bending level, seam detection, automatic loading<br />
DB 415-CNC<br />
4 -15 mm Ø<br />
fully electric<br />
DB 622-CNC<br />
6 - 22 mm Ø<br />
fully electric<br />
DB 630-CNC<br />
6 - 30 mm Ø<br />
fully electric<br />
DB 642-CNC<br />
DB 2060-CNC<br />
DB 2090-CNC<br />
6 -42 mm Ø<br />
20 - 60 mm Ø<br />
20 - 90 mm Ø<br />
partially | fully electric<br />
partially | fully electric<br />
partially | fully electric<br />
»<br />
Mandrel<br />
DB 40220-3A-CNC<br />
bending machine for pipes up to 220 mm, thin walled as well as<br />
wall thicknesses up to 20 mm, very simple tool changing<br />
24<br />
° ° ° ° ° ° ° 25