You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Cordless Drill C 12 with EC-TEC ® by Festool<br />
CENTROTEC ® , FastFix ® and equipment options.<br />
Decidedly Different –<br />
with system.<br />
CENTROTEC ® – versatile, quick and precise<br />
FastFix ® attachments<br />
The FastFix interface is an indispensable component of all Festool<br />
cordless drills. Attaching the correct system accessories turns the<br />
cordless drill into a variety of tools suitable for almost every task.<br />
Bit inserted directly in the shaft<br />
Jack of all trades.<br />
The revolutionary CENTROTEC rapid<br />
tool-change system replaces chucks and<br />
bit holders. It saves valuable time with<br />
tasks involving screwing and drilling when<br />
tools need to be changed frequently.<br />
CENTROTEC weighs 80 % less than a<br />
standard drill chuck and is 50 % shorter,<br />
but still offers 100 % performance.<br />
It doesn‘t get much shorter than this.<br />
When the bit is inserted in the direct<br />
drill holder, the C 12 is only 15 cm long.<br />
You can easily reach into small areas<br />
and work in positions with limited space.<br />
CENTROTEC ® tool chuck<br />
Extremely lightweight at only 50 grams,<br />
CENTROTEC tools can be changed<br />
quickly - maximum true-running<br />
precision guaranteed. Reliable power<br />
transmission when drilling, no slipping<br />
or damage to drill shank.<br />
Noticeably lighter.<br />
With its compact design and CENTROTEC tool chuck, the new<br />
C 12 cordless drill weighs up to 800 grams less than many of<br />
its competitors. A noticable difference, especially when working<br />
above head height.<br />
FastFix ® keyless chuck<br />
Attached in a flash when the need arises.<br />
For example, when drilling holes with<br />
large diameters, using hole cutters,<br />
Forstner drill bits or standard accessories.<br />
FastFix ® elbow adapter<br />
For drilling and screwing “around the<br />
corner”. Can be rotated 360° and<br />
adapted to any working position.<br />
Drilling Counterboring Screwing<br />
FastFix ® eccentric adapter<br />
For screwing near edges without<br />
slipping, as sometimes occurs when<br />
fitting eg brackets.<br />
The three main tasks in assembly: tool changes at the flick of a wrist.<br />
8<br />
18_ENG_AUS_C12_240205.indd 8 24.02.2005 16:31:38