EnviroFry Offers Dallas Do-Your-Own Mold Test Scotch Tape Lift Sampling, Pictures, & Lab Report

EnviroFry Offers Dallas Do-Your-Own Mold
Test Scotch Tape Lift Sampling, Pictures, &
Lab Report
EnviroFry announces its “do your own” mold testing service with lab analysis report of
collected samples and submitted mold pictures for homeowners and other property
owners, managers, and tenants in the Dallas-Fort Worth Metroplex.
Montrose, MI, October 15, 2014 -- “Homeowners, other property owners, managers,
and tenants everywhere in the Dallas-Fort Worth Metroplex can now identify and
quantify at low cost the toxic mold species types that may be infesting their buildings by
using the do-it-yourself EnviroFry Scotch Tape Lift Sampling & Mold Pictures Testing
Protocol,” announces EnviroFry co-manager Phillip Fry, and webmaster of
www.moldinspectiondallastexas.com and www.moldinspector.com.
Fry is a Certified Environmental Hygienist, Professional Industrial Hygienist, Certified
Environmental Inspector, and Certified
Remediation Specialist, whose do-ityourself
mold testing lab service helps
homeowners and other property owners,
managers, and tenants in Dallas, Fort
Worth, Allen, Arlington, Balch Springs,
Bedford, Benbrook, Blue Mound, Carrollton, Cedar Hill, Colleyville, Coppell, Euless,
Denton, DeSoto, Everman, Farmers Branch, Flower Mound, Frisco, Garland, Grand
Prairie, Grapevine, Haltom City, Hurst, Irving, Keller, Lakeworth, Lancaster, Lewisville,
Mansfield, McKinney, Mesquite, Plano, Richardson, Richland Hills, Rowlett, Saginaw,
Sansom Park, Sherman, Southlake, The Colony, Trophy Club, Watauga, Weatherford,
Westworth, White Settlement, and elsewhere in the Dallas-Ft. Worth metroplex.
The do-your-own mold testing protocol includes these steps:
1. Lift Tape Sampling
The property owner, manager, or tenant uses inexpensive, clear, transparent, sticky, one
inch (2.54 cm) wide adhesive tape, such as Scotch® brand or similar tape that is cut into
three inch (7.6 cm) long strips to collect the mold samples. Complete Scotch tape lift
sampling instructions are provided at
www.moldexpertconsultants.com/diy_mold_testing.htm.
D.I.Y. Scotch tape lift sampling is an easy, inexpensive, and effective way to do mold
sampling anywhere in the Dallas-Fort Worth Metroplex when a person---

(a) Sees mold growing on a wall, ceiling, floor, carpeting, furniture, heating/cooling duct
register, or other surface;
(b) Wants to know whether a particular stain, discoloration, growth, or mystery substance
on the wall or another surface is actually toxic mold;
(c) Smells possible mold odors (caused by the digestive gas emitted by mold eating the
home, building, or contents) and wants to test a number of surfaces upon which elevated
levels of airborne mold spores may have landed or been deposited, such as on walls,
window sills, window and door trim, refrigerator top, kitchen cabinet tops, undusted
furniture, heating/cooling duct registers, and the return air filter in the heating/cooling
system; and/or
(d) Wants to test the inside walls of heating/cooling ducts for the possible presence of
elevated levels of mold spores.
2. Take and Submit Pictures of Water Damage and Mold Growth
To supplement the collected lift tape samples, the property owner, manager, or tenant
takes close up pictures with a smart cell phone or digital camera of any visible building
water damage or mold growth, as well as pictures of the entire building, room, and areas
from which the close up photographs were taken.
3. Send Lift Tape Samples and Mold Pictures to Phillip Fry for Lab Analysis and
Fry’s Written Report Analyzing the Lab Results and Pictures
Up to three different collected lift tape samples (or alternatively, 2 inch by 2 inch
physical samples of the actual mold growth itself as cut from mold-infested building
materials or other surfaces such as carpeting), along with the lab “chain of custody form”
available at www.moldexpertconsultants.com/diy_mold_testing.htm, are then mailed
(or sent via FedEx or an alternate delivery service) to EnviroFry, 10104 Sheridan Rd.,
Montrose, Michigan 48457, USA, along with the a check or money order for U.S. $200
payable to EnviroFry, or, alternatively, credit or debit card payment by sending money
via www.paypal.com to the PayPal email payment address of phil@moldinspector.com.
Each lift tape sampling or physical mold sampling above the first three is only U.S.
$35.00 per sampling to be lab analyzed.
Mold, building, and room or area pictures, along with a detailed description of any
known building water leaks and flooding history or mould damage problems, should be
sent either as actual developed photographs to the company address, or, preferably, as
email attachments to phil@moldinspector.com.

Within five business days after EnviroFry’s receipt of the lift tape samplings and the
mold pictures, Phillip Fry will provide via email: (a) the mold lab results from an expert
mold analysis lab that is accredited by both the American Industrial Hygienists
Association (accredited EMPAT Lab) and the State of Texas (Texas Lab Id: LAB1021);
(b) Fry’s written analysis, opinion, and report as to the extent and severity of the mold
infestation, as evidenced in the submitted samples and mold pictures; (c) Fry’s specific
suggestions on how any discovered mold problem can be removed and remediated
effectively, safely, and affordably on a do-it-yourself basis.
Read Fry’s recommended ten steps for successful, do-it-yourself mold removal at
www.moldinspector.com/mold_removal.htm. Discover DIY effective mold killing and
removal equipment and supplies at www.moldmart.net.
For more information about the EnviroFry Scotch Tape Lift Sampling & Mold Pictures
Testing Protocol, please email Phillip Fry phil@moldinspector.com or phone toll-free
(USA and Canada) 1-866-300-1616 or 1-810-639-0523 (worldwide), or cell-phone 1-
480-310-7970 (worldwide), or visit www.moldexpertconsultants.com or the mold
inspector directory www.certifiedmoldinspectors.com.
Contact:
Phillip Fry, Co-Manager
EnviroFry
10104 Sheridan Rd.,
Montrose, Michigan 48457
Phone Toll-Free (USA and Canada) 1-866-300-1616
Cell-Phone 1-480-310-7970
phil@moldinspector.com
http://www.moldexpertconsultants.com or
http://www.workplacemold.com