Drives & Soft Starters - Brammer

12
Drives & Soft Starters
Drives & Soft Starters
272

Soft Starters
ATS48 Soft Starters
Telemecanique Soft Starters
Enhance starting performance of asynchronous motors by allowing them to start gradually, smoothly
and in a controlled manner
Prevent mechanical shocks which lead to wear and tear, subsequent maintenance work and downtime
ATS01N1... Soft Starters for 0.37 to 11 kW motors
Full three phase soft starter with torque control (30...80% of DOL)
Fully adjustable electronic motor overload protection, acceleration, deceleration, current limit etc.
In-built modbus comms port
Supply voltage 230...415V 3AC 50/60 Hz. Control supply voltage 220...415V required
4 x logic inputs, 2 x logic outputs, 3 x relay outputs, 1 x PTC input, 1 x analogue output
Standard duty (Class 10) and heavy duty ratings (Class 20)
Larger kW ratings available upon request
ATS48D17Q...D47Q 275mm H x 160mm W x 190mm D
ATS48D62Q...D75Q 290mm H x 190mm W x 235mm D
Price Each
Order Code Product Code Amp Rating kW 400V 3AC Std Duty kW 400V 3AC Heavy Duty 1+
Simple solid state starter with integral bypass relay
Control one phase of the motor power supply (single phase or three phase) to limit the starting
torque (30...80% of DOL)
Adjustable starting time, 1...5 s
Supply voltage ranges from 110...480V, 50/60 Hz. An external power supply (110...240 VAC / 24
VDC) is required for controlling the starter
A contactor is always required to switch off the motor
ATS01N103FT...N106FT, 100mm H x 22.5mm W x 100mm D
ATS01N109FT...N125FT, 124mm H x 45mm W x 130mm D
Price Each
Order Code Product Code Amp Rating kW 110…230V 1AC kW 400V 3AC 1+
WXL1146 ATS01N103FT 3 0.37 1.1 £119.00
WXL1147 ATS01N106FT 6 0.75 2.2…3 £123.00
WXL1148 ATS01N109FT 9 1.1 4 £128.00
WXL1149 ATS01N112FT 12 1.5 5.5 £133.00
WXL1150 ATS01N125FT 25 2.2 7.5…11 £149.00
WXL1159 ATS48D17Q 17 7.5 5.5 £493.00
WXL1160 ATS48D22Q 22 11 7.5 £557.00
WXL1161 ATS48D32Q 32 15 11 £585.00
WXL1162 ATS48D38Q 38 18.5 15 £652.00
WXL1163 ATS48D47Q 47 22 18.5 £683.00
WXL1164 ATS48D62Q 62 30 22 £721.00
WXL1165 ATS48D75Q 75 37 30 £758.00
Siemens SIRIUS Soft Starters
3RW40... 5.5kW - 45kW
12
Drives & Soft Starters
ATS01N2... Soft Starters for 2.2...45 kW motors
Simple solid state starter with integral bypass relay
Controls two phases of the motor power supply to limit the starting torque (30...80% of DOL)
Adjustable start and stop time, 1...10 s (up to 15kW) and 1...25 s (22...45kW)
Supply voltage 400V 3AC (others available upon request), 50/60 Hz.
No need for a separate control supply - built into the starter
3 x logic inputs (start, stop and startup boost), 1 x logic output and 1 x relay output
The use of a line contactor is not necessary on machines where electrical isolation is not required
ATS01N206...N212QN, 124mm H x 45mm W x 130mm D
ATS01N222...N232QN, 154mm H x 45mm W x 130mm D
ATS01N244...N285Q, 254.5mm H x 180mm W x 126mm D
Price Each
Order Code Product Code Amp Rating kW 400V 3AC 1+
WXL1151 ATS01N206QN 6 2.2...3 £133.00
WXL1152 ATS01N209QN 9 4 £145.00
WXL1153 ATS01N212QN 12 5.5 £166.00
WXL1154 ATS01N222QN 22 7.5...11 £184.00
WXL1155 ATS01N232QN 32 15 £230.00
Designed for mounting within customers enclosure
Built-in bypass contactor for low heat dissipation
Phase failure detection
Motor overload incorporated
Easy set up via potentiometers
Soft start and soft stop with current limit function
24/110/230V Control supply options
Standard starting duty, 3 x FLC up to 15 starts per hour
Rated supply voltage 200...460V
IEC 61000, EN55011, IEC 60947-4-2, UL and CSA
24V AC/DC Control Supply
Price Each
Order Code Product Code Power (400V) Current Max. Size Dimensions (H x W x D) 1+
WXL0613 3RW40241BB04 5.5 kW 12.5 Amps S0 125 x 45 x 154 mm £185.02
WXL0614 3RW40261BB04 11 kW 25 Amps S0 125 x 45 x 154 mm £217.82
WXL0615 3RW40271BB04 15 kW 32 Amps S0 125 x 45 x 154 mm £259.03
WXL0616 3RW40281BB04 18.5 kW 38 Amps S0 125 x 45 x 154 mm £310.33
WXL0617 3RW40361BB04 22 kW 45 Amps S2 170 x 55 x 170 mm £370.04
WXL0618 3RW40371BB04 30 kW 63 Amps S2 170 x 55 x 170 mm £439.00
WXL0619 3RW40381BB04 37 kW 72 Amps S2 170 x 55 x 170 mm £508.81
WXL0620 3RW40461BB04 40 kW 80 Amps S3 170 x 70 x 188 mm £573.56
WXL0621 3RW40471BB04 45 kW 90 Amps S3 170 x 70 x 188 mm £624.86
Contact Brammer on 0870 240 2100 Drives & Soft Starters 273

110/230V AC/DC Control Supply
Order Code Product Code Power (400V) Current
Max.
Price Each
Size Dimensions (H x W x D) 1+
WXL0577 3RW40241BB14 5.5 kW 12.5 Amps S0 125 x 45 x 154 mm £185.02
WXL0578 3RW40261BB14 11 kW 25 Amps S0 125 x 45 x 154 mm £217.82
WXL0579 3RW40271BB14 15 kW 32 Amps S0 125 x 45 x 154 mm £259.03
WXL0580 3RW40281BB14 18.5 kW 38 Amps S0 125 x 45 x 154 mm £310.33
WXL0581 3RW40361BB14 22 kW 45 Amps S2 170 x 55 x 170 mm £370.04
WXL0582 3RW40371BB14 30 kW 63 Amps S2 170 x 55 x 170 mm £439.00
WXL0583 3RW40381BB14 37 kW 72 Amps S2 170 x 55 x 170 mm £508.81
WXL0584 3RW40461BB14 40 kW 80 Amps S3 170 x 70 x 188 mm £573.56
WXL0585 3RW40471BB14 45 kW 90 Amps S3 170 x 70 x 188 mm £624.86
Variable Speed Drives
Siemens Variable Speed Drives
Siemens SINAMICS G110
3RW40... 75kW - 250kW
12
Drives & Soft Starters
Designed for mounting within customers enclosure
Standard starting duty, 3 x FLC up to 15 starts per hour (contact Brammer for advice)
Built-in bypass contactor for low heat dissipation
Phase failure detection
Motor overload incorporated
Easy set up via potentiometers
Soft start and soft stop with current limit function
110/230V Control supply options
Rated supply voltage 200...460V
IEC 61000, EN55011, IEC 60947-4-2, UL and CSA
110VAC Control Supply
Filtered to EMC class "B"
Standard drive for use with analogue and digital I/O
"Fast Current Limit" to avoid nuisance tripping under deceleration
3 fully programmable digital inputs
0-10V analogue input
1 isolated digital optocoupler output (24V, 50mA)
Single phase 200/240V AC, 50/60Hz
Output: 0-input supply
150% overload for 60 seconds
Output frequency: 0-650Hz
Price Each
Order Code Product Code Power Current Max. Dimensions (H x W x D) 1+
WXL0490 6SL32110AB112BA1 0.12kW 0.9 Amps 150 x 90 x 116 mm £106.00
WXL0244 6SL32110AB125BA1 0.25kW 1.7 Amps 150 x 90 x 116 mm £115.00
WXL0245 6SL32110AB137BA1 0.37kW 2.3 Amps 150 x 90 x 116 mm £125.00
WXL0246 6SL32110AB155BA1 0.55kW 3.2 Amps 150 x 90 x 131 mm £134.00
WXL0247 6SL32110AB175BA1 0.75kW 3.9 Amps 150 x 90 x 131 mm £147.00
WXL0248 6SL32110AB211AA1 1.1kW 6.0 Amps 160 x 140 x 142 mm £171.00
WXL0249 6SL32110AB215AA1 1.5kW 7.8 Amps 160 x 140 x 142 mm £198.00
WXL0250 6SL32110AB222AA1 2.2kW 11.0 Amps 181 x 184 x 152 mm £234.00
WXL0251 6SL32110AB230AA1 3kW 13.6 Amps 181 x 184 x 152 mm £271.00
Siemens SINAMICS G110 Options
Price Each
Order Code Product Code Power (400V) Current Max. Size Dimensions (H x W x D) 1+
WXL0586 3RW40556BB34 75 kW 134 Amps S6 198 X 120 X 250 mm £661.87
WXL0587 3RW40566BB34 90 kW 162 Amps S6 198 X 120 X 250 mm £822.50
WXL0588 3RW40736BB34 132 kW 230 Amps S12 230 x 160 x 278 mm £925.10
WXL0589 3RW40746BB34 160 kW 280 Amps S12 230 x 160 x 278 mm £1034.43
WXL0590 3RW40756BB34 200 kW 356 Amps S12 230 x 160 x 278 mm £1211.04
WXL0591 3RW40766BB34 250 kW 432 Amps S12 230 x 160 x 278 mm £1597.90
230VAC Control Supply
Price Each
Order Code Product Code Power (400V) Current Max. Size Dimensions (H x W x D) 1+
WXL0592 3RW40556BB44 75 kW 134 Amps S6 198 X 120 X 250 mm £661.87
WXL0593 3RW40566BB44 90 kW 162 Amps S6 198 X 120 X 250 mm £822.50
WXL0594 3RW40736BB44 132 kW 230 Amps S12 230 x 160 x 278 mm £925.10
WXL0595 3RW40746BB44 160 kW 280 Amps S12 230 x 160 x 278 mm £1034.43
WXL0596 3RW40756BB44 200 kW 356 Amps S12 230 x 160 x 278 mm £1211.04
WXL0597 3RW40766BB44 250 kW 432 Amps S12 230 x 160 x 278 mm £1597.90
G110 Basic Operator Panel
Price Each
Order Code Product Code 1+
WXL0494 6SL32550AA004BA1 £22.00
274
Everything you need – when you need it – Tel: 0870 240 2100

Siemens SINAMICS G120C Compact, USS / Modbus RTU, 3 Phase Supplied - Filtered for
Domestic or Commercial Use
Price Each
Order Code Product Code Description 1+
WXL1480 6SL32550AA004CA1 Basic Operator Panel 2 (BOP-2) £40.00
WXL1145 6SL32550AA004JA0 Inteligent Operator Panel (IOP) £152.00
WXL1481 6SL32560AP000JA0 IOP/BOP-2 door mounting kit £32.00
WXL1859 6SL32550AA002CA0 PC connection kit 2 (includes Starter DVD and 3m USB cable) £26.00
WXL1143 6SL32540AM000AA0 MMC Card £53.00
WXL1860 6SL30720AA000AG0 Starter commissioning software on DVD £27.32
Siemens SINAMICS G120, PM240 Power Module, Filtered for Industrial Use
SINAMICS G120C is a compact inverter in IP20 degree of protection where the Control Unit (CU) and Power
Module (PM) function units are combined in one device. A well balanced combination of features to address
a wide range of applications.
Compact design (side by side mountable)
Simple fast commissioning
Equipped with safety function STO (Safe Torque Off) as standard
Integrated brake chopper
6 Fully programmable digital inputs
1 Failsafe Input (STO, uses 2 digital inputs DI4+DI5)
2 Fully programmable digital outputs (1 relay, 1 transistor)
1 Selectable -10...+10, 0/4...20mA analogue input
1 0...20mA analogue output
1 PTC/KTY Input
Communication interface, RS485/USS/Modbus RTU (Profibus and CANopen versions are also
available but not listed here)
Control types: Energy-efficient SLVC, Automatic flux reduction with V/F ECO, V/F linear, square law
& FCC
3 phase 380...480V
0...650 Hz V/f, 0...240 Hz Vector
Price Each
Order Code Product Code Power Current Max. Dimensions
(H x W x D)
WXL1805 6SL32101KE118AB0 0.37kW HO / 0.55kW LO 1.3A HO / 1.7A LO 196 x 73 x 203 mm £393.00
WXL1806 6SL32101KE123AB0 0.55kW HO / 0.75kW LO 1.7A HO / 2.2A LO 196x 73 x 203 mm £408.00
WXL1807 6SL32101KE132AB0 0.75kW HO / 1.1kW LO 2.2A HO / 3.1A LO 196 x 73 x 203 mm £426.00
WXL1808 6SL32101KE143AB0 1.1kW HO / 1.5kW LO 3.1A HO / 4.1A LO 196 x 73 x 203 mm £448.00
WXL1809 6SL32101KE158AB0 1.5kW HO / 2.2kW LO 4.1A HO / 5.6A LO 196 x 73 x 203 mm £492.00
WXL1810 6SL32101KE175AB0 2.2kW HO / 3kW LO 5.6A HO / 7.3A LO 196 x 73 x 203 mm £576.00
WXL1811 6SL32101KE188AB0 3kW HO / 4kW LO 7.3A HO / 8.8A LO 196 x 73 x 203 mm £653.00
WXL1812 6SL32101KE213AB0 4kW HO / 5.5kW LO 8.8A HO / 12.5A LO 196 x 100 x 203 mm £765.00
WXL1813 6SL32101KE217AB0 5.5kW HO / 7.5kW LO 12.5A HO / 16.5A LO 196 x 100 x 203 mm £938.00
WXL1814 6SL32101KE226AB0 7.5kW HO / 11kW LO 16.5A HO / 25A LO 295 x 140 x 203 mm £1220.00
WXL1815 6SL32101KE232AB0 11kW HO / 15kW LO 25A HO / 31A LO 295 x 140 x 203 mm £1695.00
WXL1816 6SL32101KE238AB0 15kW HO / 18.5kW LO 31A HO/ 37A LO 295 x 140 x 203 mm £1990.00
Note: HO = High Overload Rating (1.5 x rated current for 57 secs).
LO = Low Overload Rating (1.1 x rated current for 57 secs).
Siemens SINAMICS G120C Options
1+
The Power Module PM240 from the SINAMICS G120 family of frequency inverters has a power output range
of 0.37kW to 200kW (high overload). It is of a modular structure design and is equipped with a multitude
of new functions, setting a new standard in safety and communication capabilities for general purpose
inverters.
Modular - Power module and Control unit (Picture shows Power module + Control unit + Keypad)
Flexible expansion capability
Simple fast commissioning
Safety integrated functions without encoder, safe torque off, safe limited speed, safe stop 1, safe
brake control (via the fail-safe control unit)
Built in braking module (up to 110kW)
Module replacement when system is running (hot swapping)
Control types: V/f, FCC, VC, SLVC
3 phase 380...480V
Price Each
Order Code Product Code Power Current Max. Dimensions
(H x W x D)
WXL1097 6SL32240BE137UA0 0.37kW 1.3 Amps 173 x 73 x 145 mm £192.00
WXL1098 6SL32240BE155UA0 0.55kW 1.7 Amps 173 x 73 x 145 mm £207.00
WXL1099 6SL32240BE175UA0 0.75kW 2.2 Amps 173 x 73 x 145 mm £218.00
WXL1100 6SL32240BE211UA0 1.1kW 3.1 Amps 173 x 73 x 145 mm £254.00
WXL1101 6SL32240BE215UA0 1.5kW 4.1 Amps 173 x 73 x 145 mm £299.00
WXL1103 6SL32240BE222UA0 2.2kW 5.9 Amps 270 x 153 x 165 mm £372.00
WXL1105 6SL32240BE230UA0 3kW 7.7 Amps 270 x 153 x 165 mm £442.00
WXL1107 6SL32240BE240UA0 4kW 10.2 Amps 270 x 153 x 165 mm £520.00
WXL1109 6SL32240BE255UA0 5.5kW HO / 7.5kW LO 13.2A HO / 18A LO 334 x 189 x 185 mm £673.00
WXL1111 6SL32240BE275UA0 7.5kW HO / 11kW LO 19A HO / 25A LO 334 x 189 x 185 mm £861.00
WXL1113 6SL32240BE311UA0 11kW HO / 15kW LO 26A HO / 32A LO 334 x 189 x 185 mm £1175.00
WXL1115 6SL32240BE315UA0 15kW HO / 18.5kW LO 32A HO / 38A LO 419 x 275 x 204 mm £1525.00
WXL1117 6SL32240BE318UA0 18.5kW HO / 22kW LO 38A HO / 45A LO 419 x 275 x 204 mm £1760.00
WXL1119 6SL32240BE322UA0 22kW HO / 30kW LO 45A HO / 60A LO 419 x 275 x 204 mm £2070.00
WXL1121 6SL32240BE330UA0 30kW HO / 37kW LO 60A HO / 75A LO 499 x 275 x 204 mm £2690.00
WXL1123 6SL32240BE337UA0 37kW HO / 45kW LO 75A HO / 90A LO 499 x 275 x 204 mm £3160.00
WXL1125 6SL32240BE345UA0 45kW HO / 55kW LO 90A HO / 110A LO 634 x 350 x 316 mm £3685.00
WXL1127 6SL32240BE355UA0 55kW HO / 75kW LO 110A HO / 145A LO 634 x 350 x 316 mm £4215.00
WXL1129 6SL32240BE375UA0 75kW HO / 90kW LO 145A HO / 178A LO 634 x 350 x 316 mm £5195.00
WXL1130 6SL32240BE388UA0 90kW HO / 110kW LO 178A HO / 205A LO 634 x 350 x 316 mm £5895.00
WXL1131 6SL32240BE411UA0 110kW HO / 132kW LO 205A HO / 250A LO 634 x 350 x 316 mm £6830.00
WXL1132 6SL32240XE413UA0 132kW HO / 160kW LO 250A HO / 302A LO 1400 x 547 x 326 mm £8120.00
WXL1133 6SL32240XE416UA0 160kW HO / 200kW LO 302A HO / 370A LO 1400 x 547 x 326 mm £9135.00
WXL1134 6SL32240XE420UA0 200kW HO / 250kW LO 370A HO / 477A LO 1400 x 547 x 326 mm £10550.00
1+
12
Drives & Soft Starters
Note: HO = High Overload Rating (1.5 x rated current for 57 secs).
LO = Low Overload Rating (1.1 x rated current for 57 secs).
Contact Brammer on 0870 240 2100 Drives & Soft Starters 275

Siemens SINAMICS G120, PM240 Power Module, Filtered for Domestic or Commercial
Use
Siemens SINAMICS PM240 CU Options
Integral class "A" EMC filter, 3 Phase 380/480V AC, 50/60Hz
Price Each
Order Code Product Code Power Current Max. Dimensions
(H x W x D)
1+
12
Drives & Soft Starters
WXL1102 6SL32240BE222AA0 2.2kW 5.9 Amps 270 x 153 x 165 mm £436.00
WXL1104 6SL32240BE230AA0 3kW 7.7 Amps 270 x 153 x 165 mm £519.00
WXL1106 6SL32240BE240AA0 4kW 10.2 Amps 270 x 153 x 165 mm £612.00
WXL1108 6SL32240BE255AA0 5.5kW HO / 7.5kW LO 13.2A HO / 18A LO 334 x 189 x 185 mm £783.00
WXL1110 6SL32240BE275AA0 7.5kW HO / 11kW LO 19A HO / 25A LO 334 x 189 x 185 mm £1015.00
WXL1112 6SL32240BE311AA0 11kW HO / 15kW LO 26A HO / 32A LO 334 x 189 x 185 mm £1335.00
WXL1114 6SL32240BE315AA0 15kW HO / 18.5kW LO 32A HO / 38A LO 512 x 275 x 204 mm £1680.00
WXL1116 6SL32240BE318AA0 18.5kW HO / 22kW LO 38A HO / 45A LO 512 x 275 x 204 mm £1960.00
WXL1118 6SL32240BE322AA0 22kW HO / 30kW LO 45A HO / 60A LO 512 x 275 x 204 mm £2265.00
WXL1120 6SL32240BE330AA0 30kW HO / 37kW LO 60A HO / 75A LO 635 x 275 x 204 mm £2980.00
WXL1122 6SL32240BE337AA0 37kW HO / 45kW LO 75A HO / 90A LO 635 x 275 x 204 mm £3490.00
WXL1124 6SL32240BE345AA0 45kW HO / 55kW LO 90A HO / 110A LO 934 x 350 x 316 mm £4080.00
WXL1126 6SL32240BE355AA0 55kW HO / 75kW LO 110A HO / 145A LO 934 x 350 x 316 mm £4620.00
WXL1128 6SL32240BE375AA0 75kW HO / 90kW LO 145A HO / 178A LO 934 x 350 x 316 mm £5760.00
Note: HO = High Overload Rating (1.5 x rated current for 57 secs).
LO = Low Overload Rating (1.1 x rated current for 57 secs).
Siemens SINAMICS G120, PM240 Control Units
Price Each
Order Code Product Code Description 1+
WXL1480 6SL32550AA004CA1 Basic Operator Panel 2 (BOP-2) £40.00
WXL1145 6SL32550AA004JA0 Inteligent Operator Panel (IOP) £152.00
WXL1481 6SL32560AP000JA0 IOP/BOP-2 door mounting kit £32.00
WXL1859 6SL32550AA002CA0 PC connection kit 2 (includes Starter DVD and 3m USB cable) £26.00
WXL1143 6SL32540AM000AA0 MMC Card £53.00
WXL1860 6SL30720AA000AG0 Starter commissioning software on DVD £27.32
Siemens SINAMICS G120P, PM230 Power Module, Filtered for Domestic or Commercial
Use
Price Each
Order Code Product Code Description I/O 1+
WXL1840 6SL32440BB121BA1 Control Unit Standard (CU240E-2) RS485/
USS/Modbus RTU
WXL1841 6SL32440BB121PA1 Control Unit Standard (CU240E-2 DP),
PROFIBUS DP / PROFIsafe
6 DI, 2 AI, 3 DO, 2
AO, 1 F-DI
6 DI, 2 AI, 3 DO, 2
AO, 1 F-DI
WXL1842 6SL32440BB131BA1 Conntrol Unit Standard (CU240E-2-F), RS485/ 6 DI, 2 AI, 3 DO, 2
USS/Modbus RTU
AO, 3 F-DI
WXL1843 6SL32440BB131PA1 Control Unit Standard (CU240E-2 DP-F),
PROFIBUS DP / PROFIsafe
WXL1838 6SL32440BB001BA1 Control Unit Basic (CU240B-2) RS485/USS/
Modbus RTU
WXL1839 6SL32440BB001PA1 Control Unit Basic (CU240B-2 DP) PROFIBUS
DP
WXL1837 6SL32430BB301HA2 Control Unit Specialist HVAC (CU230P-2
HVAC) RS485/USS/Modbus RTU
WXL1861 6SL32430BB301PA2 Control Unit Specialist HVAC (CU230P-2 DP)
PROFIBUS DP
6 DI, 2 AI, 3 DO, 2
AO, 3 F-DI
4 DI, 1 AI, 1 DO,
1 AO
4 DI, 1 AI, 1 DO,
1 AO
6DI, 4AI, 3DO,
2AO
6DI, 4AI, 3DO,
2AO
WXL1862 6SL32430BB301CA2 Control Unit Specialist HVAC (CU230P-2 CAN) 6DI, 4AI, 3DO,
CANopen
2AO
£187.00
£224.00
£270.00
£311.00
£128.00
£167.00
£259.00
£315.00
£325.10
The SINAMICS G120P is an innovative, energy efficient variable speed drive specifically designed for pump,
fan and compressor applications in the process, water and building automation industries. It is a modular
solution consisting of a Power Module (PM), Control Unit (CU) and optional Operator Panel (IOP or BOP-
2). Suitable for 3 ph 380-480V AC mains supplies with power ranges of 0.37kW to 90kW (LO).
IP54 with IOP / BOP-2 and IP55 with blanking cover
Advanced hardware and software solutions to reduce energy consumption
Simple fast commissioning
Automatic restart
Flying restart
ECO mode - adaption to load conditions
Hibernation mode
Essential service mode
Motor staging (between 1 and 4 motors)
Read time clock
4 integrated PID controllers
Multi-zone controller
Minimum harmonics - line reactor not needed
3 phase 380...480V
Price Each
Order Code Product Code Power Current Max. Dimensions (H x W x D) 1+
WXL1817 6SL32230DE137AA0 0.37kW LO / 1.3A LO / 0.9A HO 460 x 154 x 264 mm £210.00
0.25kW HO
WXL1818 6SL32230DE155AA0 0.55kW LO / 1.7A LO / 1.3A HO 460 x 154 x 264 mm £221.00
0.37kW HO
WXL1819 6SL32230DE175AA0 0.75kW LO /
0.55kW HO
2.2A LO / 1.7A HO 460 x 154 x 264 mm £241.00
276
Nationwide coverage, delivered locally same or next day – Tel: 0870 240 2100

Order Code Product Code Power Current Max. Dimensions (H x W x D) 1+
WXL1820 6SL32230DE211AA0 1.1kW LO / 3.1A LO / 2.2 HO 460 x 154 x 264 mm £257.00
0.75kW HO
WXL1821 6SL32230DE215AA0 1.5kW LO / 4.1A LO / 3.1A HO 460 x 154 x 264 mm £292.00
1.1kW HO
WXL1822 6SL32230DE222AA0 2.2kW LO / 5.9A LO / 4.1A HO 460 x 154 x 264 mm £354.00
1.5kW HO
WXL1823 6SL32230DE230AA0 3kW LO / 7.7A LO / 5.9A HO 460 x 154 x 264 mm £443.00
2.2kW HO
WXL1824 6SL32230DE240AA0 4kW LO / 10.2A LO / 7.7A HO 540 x 180 x 264 mm £524.00
3kW HO
WXL1825 6SL32230DE255AA0 5.5kW HO / 13.2A LO / 10.2A HO 540 x 180 x 264 mm £614.00
4kW HO
WXL1826 6SL32230DE275AA0 7.5kW LO / 18A LO / 13.2A HO 540 x 180 x 264 mm £797.00
5.5kW HO
WXL1827 6SL32230DE311AA0 11kW LO / 26A LO / 18A HO 620 x 230 x 264 mm £1125.00
7.5kW HO
WXL1828 6SL32230DE315AA0 15kW LO / 32A LO / 26A HO 620 x 230 x 264 mm £1460.00
11kW HO
WXL1829 6SL32230DE318AA0 18.5kW LO / 38A LO / 32A HO 620 x 230 x 264 mm £1790.00
15kW HO
WXL1830 6SL32230DE322AA0 22kW LO / 45A LO / 38A HO 640 x 320 x 344 mm £2100.00
18.5kW HO
WXL1831 6SL32230DE330AA0 30kW LO / 60A LO / 45A HO 640 x 320 x 344 mm £2660.00
22kW HO
WXL1832 6SL32230DE337AA0 37kW LO / 75A LO / 60A HO 751 x 320 x 344 mm £3265.00
30kW HO
WXL1833 6SL32230DE345AA0 45kW LO / 90A LO / 75A HO 751 x 320 x 344 mm £3985.00
37kW HO
WXL1834 6SL32230DE355AA0 55kW LO / 110A LO / 90A HO 915 x 410 x 431 mm £4665.00
45kW HO
WXL1835 6SL32230DE375AA0 75kW LO / 145A LO / 110A HO 915 x 410 x 431 mm £5600.00
55kW HO
WXL1836 6SL32230DE388AA0 90kW LO /
75kW HO
178A LO / 145A HO 915 x 410 x 431 mm £6550.00
Note: LO = Low Overload Rating (1.1 x rated current for 57 secs).
HO = High Overload Rating (1.5 x rated current for 57 secs).
Siemens SINAMICS G120P, Control Units
Siemens SINAMICS G120P, Options
Price Each
Order Code Product Code Description 1+
WXL1480 6SL32550AA004CA1 Basic Operator Panel 2 (BOP-2) £40.00
WXL1145 6SL32550AA004JA0 Inteligent Operator Panel (IOP) £152.00
WXL1863 6SL32561BA000AA0 Blanking cover for PM230 Power Module £14.00
WXL1859 6SL32550AA002CA0 PC connection kit 2 (includes Starter DVD and 3m USB cable) £26.00
WXL1143 6SL32540AM000AA0 MMC Card £53.00
WXL1844 6SL32641EA000FA0 Shield connection kit 1 for CU230P-2 Control Units £12.00
Siemens Micromaster 420, Single Phase Supplied c/w Class "A" EMC Filter
12
Drives & Soft Starters
Price Each
Order Code Product Code Description I/O 1+
WXL1837 6SL32430BB301HA2 Control Unit Specialist HVAC (CU230P-2 HVAC)
RS485/USS/Modbus RTU
WXL1861 6SL32430BB301PA2 Control Unit Specialist HVAC (CU230P-2 DP)
PROFIBUS DP
WXL1862 6SL32430BB301CA2 Control Unit Specialist HVAC (CU230P-2 CAN)
CANopen
6DI, 4AI,
3DO, 2AO
6DI, 4AI,
3DO, 2AO
6DI, 4AI,
3DO, 2AO
£259.00
£315.00
325.10
"Flux Current Control" to optimise the dynamic response and motor control
Slip compensation ensuring constant motor speeds under varying load conditions
"Fast Current Limit" to avoid nuisance tripping under deceleration
3 fully programmable opto-isolated digital inputs
0-10V analogue input
Programmable and scalable 0/4-20mA analogue output
Programmable relay output
Integrated RS485 port for serial communications
Integral class "A" EMC filter
Single phase 200/240V AC, 50/60Hz
Overload range 150% for 60 seconds
Output voltage 0-input supply
Output frequency 0 - 650 Hz
Price Each
Order Code Product Code Power Current Max. Dimensions (H x W x D) 1+
WXL0254 6SE64202AB112AA1 0.12kW 0.9 Amps 173 x 73 x 149 mm £149.00
WXL0255 6SE64202AB125AA1 0.25kW 1.7 Amps 173 x 73 x 149 mm £160.00
WXL0256 6SE64202AB137AA1 0.37kW 2.3 Amps 173 x 73 x 149 mm £174.00
WXL0257 6SE64202AB155AA1 0.55kW 3.0 Amps 173 x 73 x 149 mm £187.00
WXL0258 6SE64202AB175AA1 0.75kW 3.9 Amps 173 x 73 x 149 mm £206.00
WXL0259 6SE64202AB211BA1 1.1kW 5.5 Amps 202 x 149 x 172 mm £237.00
WXL0260 6SE64202AB215BA1 1.5kW 7.4 Amps 202 x 149 x 172 mm £274.00
WXL0261 6SE64202AB222BA1 2.2kW 10.4 Amps 202 x 149 x 172 mm £323.00
WXL0262 6SE64202AB230CA1 3.0kW 13.6 Amps 245 x 185 x 195 mm £377.00
Contact Brammer on 0870 240 2100 Drives & Soft Starters 277

Siemens Micromaster 420, 3 Phase Supplied - Filtered for Industrial Use
3 Phase 380/480V AC, 50/60Hz
Price Each
Order Code Product Code Power Current Max. Dimensions (H x W x D) 1+
WXL0263 6SE64202UD137AA1 0.37kW 1.2 Amps 173 x 73 x 149 mm £328.00
WXL0264 6SE64202UD155AA1 0.55kW 1.6 Amps 173 x 73 x 149 mm £340.00
WXL0265 6SE64202UD175AA1 0.75kW 2.1 Amps 173 x 73 x 149 mm £355.00
WXL0266 6SE64202UD211AA1 1.1kW 3.0 Amps 173 x 73 x 149 mm £375.00
WXL0267 6SE64202UD215AA1 1.5kW 4.0 Amps 173 x 73 x 149 mm £397.00
WXL0268 6SE64202UD222BA1 2.2kW 5.9 Amps 202 x 149 x 172 mm £446.00
WXL0269 6SE64202UD230BA1 3kW 7.7 Amps 202 x 149 x 172 mm £506.00
WXL0270 6SE64202UD240BA1 4kW 10.2 Amps 202 x 149 x 172 mm £557.00
WXL0271 6SE64202UD255CA1 5.5kW 13.2 Amps 245 x 185 x 195 mm £709.00
WXL0272 6SE64202UD275CA1 7.5kW 19 Amps 245 x 185 x 195 mm £854.00
WXL0273 6SE64202UD311CA1 11kW 26 Amps 245 x 185 x 195 mm £1095.00
Order Code Product Code Power Current Max. Dimensions
1+
(H x W x D)
WXL0502 6SE64302UD345EA0 45 kW 90 Amps 650 x 275 x 245 mm £3425.00
WXL0503 6SE64302UD355FA0 55 kW 110 Amps 850 x 350 x 320 mm £3940.00
WXL0504 6SE64302UD375FA0 75 kW 145 Amps 850 x 350 x 320 mm £4445.00
WXL0505 6SE64302UD388FA0 90 kW 178 Amps 850 x 350 x 320 mm £5235.00
WXL0506 6SE64302UD411FA0 110 kW 205 Amps 1400 x 326 x 356 mm £6735.00
WXL0507 6SE64302UD413FA0 132 kW 250 Amps 1400 x 326 x 356 mm £7790.00
WXL0508 6SE64302UD416GA0 160 kW 302 Amps 1533 x 326 x 545 mm £8755.00
WXL0509 6SE64302UD420GA0 200 kW 370 Amps 1533 x 326 x 545 mm £9890.00
WXL0510 6SE64302UD425GA0 250 kW 477 Amps 1533 x 326 x 545 mm £11610.00
Siemens Micromaster 440, Single Phase Supplied c/w Class "A" EMC Filter
Siemens Micromaster 420, 3 Phase Supplied - Filtered for Domestic or Commercial Use
Integral class "A" EMC filter, 3 Phase 380/480V AC, 50/60Hz
Price Each
Order Code Product Code Power Current Max. Dimensions (H x W x D) 1+
12
Drives & Soft Starters
WXL0274 6SE64202AD222BA1 2.2kW 5.9 Amps 202 x 149 x 172 mm £500.00
WXL0275 6SE64202AD230BA1 3kW 7.7 Amps 202 x 149 x 172 mm £567.00
WXL0276 6SE64202AD240BA1 4kW 10.2 Amps 202 x 149 x 172 mm £625.00
WXL0277 6SE64202AD255CA1 5.5kW 13.2 Amps 245 x 185 x 195 mm £794.00
WXL0278 6SE64202AD275CA1 7.5kW 19 Amps 245 x 185 x 195 mm £956.00
WXL0279 6SE64202AD311CA1 11kW 26 Amps 245 x 185 x 195 mm £1235.00
Siemens Micromaster 430, 3 Phase Supplied - Filtered for Industrial Use
"Sensorless Vector Control" and "Flux Current Control" for optimum motor performance
Slip compensation ensuring constant motor speeds under varying load conditions
"Fast Current Limit" to avoid nuisance tripping under deceleration
6 fully programmable opto-isolated digital inputs
2 Programmable and scalable 0/4-20mA analogue outputs
3 Programmable relay outputs
Integrated RS485 port for serial communications
Single phase 200/240V AC, 50/60Hz
Output voltage 0-input supply
Output frequency 0 - 650 Hz
Overload range 150% for 60 seconds
Integral class "A" EMC filter
2 scalable, freely programmable analogue inputs, 0-10V, 0/4-20mA
DC Injection and "Compound Braking" to ensure minimum motor stopping time without external
braking resistors
Integrated PID controller
Constant torque rated
Price Each
Order Code Product Code Power Current Max. Dimensions (H x W x D) 1+
Output up to 250kW for centrifugal (variable torque) pumps and fans
3 phase 380/480V AC, 50/60Hz
Output voltage 0-input supply
Compact IP20 housing
Energy saving mode and hibernation facility
Motor / pump staging
Manual / auto mode
Load torque detection (detects dry running pumps)
Facility for external bypass control
Direct "ptc" or "kty" motor temperature protection
Remote I/O function via serial communication or fieldbus link
Different ratings may apply for constant torque pumps and fans
Price Each
Order Code Product Code Power Current Max. Dimensions
1+
(H x W x D)
WXL0495 6SE64302UD275CA0 7.5 kW 19 Amps 245 x 185 x 195 mm £927.00
WXL0496 6SE64302UD311CA0 11 kW 26 Amps 245 x 185 x 195 mm £1110.00
WXL0497 6SE64302UD315CA0 15 kW 32 Amps 245 x 185 x 195 mm £1385.00
WXL0498 6SE64302UD318DA0 18.5 kW 38 Amps 520 x 275 x 245 mm £1760.00
WXL0499 6SE64302UD322DA0 22 kW 45 Amps 520 x 275 x 245 mm £1995.00
WXL0500 6SE64302UD330DA0 30 kW 62 Amps 520 x 275 x 245 mm £2315.00
WXL0501 6SE64302UD337EA0 37 kW 75 Amps 650 x 275 x 245 mm £2960.00
WXL0280 6SE64402AB112AA1 0.12kW 0.9 Amps 173 x 73 x 149 mm £211.00
WXL0281 6SE64402AB125AA1 0.25kW 1.7 Amps 173 x 73 x 149 mm £225.00
WXL0282 6SE64402AB137AA1 0.37kW 2.3 Amps 173 x 73 x 149 mm £245.00
WXL0283 6SE64402AB155AA1 0.55kW 3.0 Amps 173 x 73 x 149 mm £265.00
WXL0284 6SE64402AB175AA1 0.75kW 3.9 Amps 173 x 73 x 149 mm £278.00
WXL0285 6SE64402AB211BA1 1.1kW 5.5 Amps 202 x 149 x 172 mm £319.00
WXL0286 6SE64402AB215BA1 1.5kW 7.4 Amps 202 x 149 x 172 mm £363.00
WXL0287 6SE64402AB222BA1 2.2kW 10.4 Amps 202 x 149 x 172 mm £427.00
WXL0288 6SE64402AB230CA1 3.0kW 13.6 Amps 245 x 185 x 195 mm £499.00
For Asco process
valves, see our
Pneumatics
section
278
90 Brammer Sales & Service Centres nationwide – Tel: 0870 240 2100

Siemens Micromaster 440, 3 Phase Supplied - Filtered for Industrial Use
Siemens Micromaster 440, 3 Phase Supplied - Filtered for Domestic or Commercial Use
Integral class "A" EMC filter, 3 Phase 380/480V AC, 50/60Hz
Price Each
3 Phase 380/480V AC, 50/60Hz
Order
Code
Product Code Power Current Max. Dimensions
(H x W x D)
Price Each
WXL0289 6SE64402UD137AA1 0.37kW 1.3 Amps 173 x 73 x 149 mm £403.00
WXL0290 6SE64402UD155AA1 0.55kW 1.7 Amps 173 x 73 x 149 mm £422.00
WXL0291 6SE64402UD175AA1 0.75kW 2.2 Amps 173 x 73 x 149 mm £437.00
WXL0292 6SE64402UD211AA1 1.1kW 3.1 Amps 173 x 73 x 149 mm £466.00
WXL0293 6SE64402UD215AA1 1.5kW 4.1 Amps 173 x 73 x 149 mm £522.00
WXL0294 6SE64402UD222BA1 2.2kW 5.9 Amps 202 x 149 x 172 mm £606.00
WXL0295 6SE64402UD230BA1 3kW 7.7 Amps 202 x 149 x 172 mm £680.00
WXL0296 6SE64402UD240BA1 4kW 10.2 Amps 202 x 149 x 172 mm £765.00
WXL0297 6SE64402UD255CA1 5.5kW CT/7.5kW VT 13 Amps CT/19
Amps VT
WXL0298 6SE64402UD275CA1 7.5kW CT/11kW VT 19 Amps CT/26
Amps VT
WXL0299 6SE64402UD311CA1 11kW CT/15kW VT 26 Amps CT/32
Amps VT
WXL0492 6SE64402UD315DA1 15kW CT/18.5kW VT 32 Amps CT/38
Amps VT
WXL0301 6SE64402UD318DA1 18.5kW CT/22kW VT 38 Amps CT/45
Amps VT
WXL0302 6SE64402UD322DA1 22kW CT/30kW VT 45 Amps CT/62
Amps VT
WXL0303 6SE64402UD330EA1 30kW CT/37kW VT 62 Amps CT/75
Amps VT
WXL0304 6SE64402UD337EA1 37kW CT/45kW VT 75 Amps CT/90
Amps VT
WXL0305 6SE64402UD345FA1 45kW CT/55kW VT 90 Amps CT/110
Amps VT
WXL0306 6SE64402UD355FA1 55kW CT/75kW VT 110 Amps CT/145
Amps VT
WXL0307 6SE64402UD375FA1 75kW CT/90kW VT 145 Amps CT/178
Amps VT
WXL0511 6SE64402UD388FA1 90kW CT/110kW VT 178 Amps CT/205
Amps VT
WXL0512 6SE64402UD411FA1 110kW CT/132kW VT 205 Amps CT/250
Amps VT
WXL0513 6SE64402UD413GA1 132kW CT/160kW VT 250 Amps CT/320
Amps VT
WXL0514 6SE64402UD416GA1 160kW CT/200kW VT 302 Amps CT/370
Amps VT
WXL0515 6SE64402UD420GA1 200kW CT/250kW VT 370 Amps CT/477
Amps VT
1+
245 x 185 x 195 mm £939.00
245 x 185 x 195 mm £1145.00
245 x 185 x 195 mm £1480.00
520 x 275 x 245 mm £1875.00
520 x 275 x 245 mm £2145.00
520 x 275 x 245 mm £2500.00
650 x 275 x 245 mm £3215.00
650 x 275 x 245 mm £3710.00
850 x 350 x 320 mm £4290.00
850 x 350 x 320 mm £4865.00
850 x 350 x 320 mm £5735.00
1400 x 326 x 356 mm £7135.00
1400 x 326 x 356 mm £8245.00
1533 x 326 x 545 mm £9260.00
1533 x 326 x 545 mm £10465.00
1533 x 326 x 545 mm £12220.00
Order
Code
Product Code Power Current Max. Dimensions
(H x W x D)
WXL0308 6SE64402AD222BA1 2.2kW 5.9 Amps 202 x 149 x 172 mm £680.00
WXL0309 6SE64402AD230BA1 3kW 7.7 Amps 202 x 149 x 172 mm £764.00
WXL0310 6SE64402AD240BA1 4kW 10.2 Amps 202 x 149 x 172 mm £860.00
WXL0311 6SE64402AD255CA1 5.5kW CT/7.5kW VT 13 Amps CT/19
Amps VT
WXL0312 6SE64402AD275CA1 7.5kW CT/11kW Vt 19 Amps CT/26
Amps VT
WXL0313 6SE64402AD311CA1 11kW CT/15kW VT 26 Amps CT/32
Amps VT
WXL0493 6SE64402AD315DA1 15kW CT/18.5kW VT 32 Amps CT/38
Amps VT
WXL0315 6SE64402AD318DA1 18.5kW CT/22kW VT 38 Amps CT/45
Amps VT
WXL0316 6SE64402AD322DA1 22kW CT/30kW VT 45 Amps CT/62
Amps VT
WXL0317 6SE64402AD330EA1 30kW CT/37kW VT 62 Amps CT/75
Amps VT
WXL0318 6SE64402AD337EA1 37kW CT/45kW VT 75 Amps CT/90
Amps VT
WXL0319 6SE64402AD345FA1 45kW CT/55kW VT 90 Amps CT/110
Amps VT
WXL0320 6SE64402AD355FA1 55kW CT/75kW VT 110 Amps CT/145
Amps VT
WXL0321 6SE64402AD375FA1 75kW CT/90kW VT 145 Amps CT/178
Amps VT
Siemens Micromaster 4 Options
Operator Panels
1+
245 x 185 x 195 mm £1055.00
245 x 185 x 195 mm £1290.00
245 x 185 x 195 mm £1660.00
520 x 275 x 245 mm £2025.00
520 x 275 x 245 mm £2325.00
520 x 275 x 245 mm £2700.00
650 x 275 x 245 mm £3470.00
650 x 275 x 245 mm £4005.00
1050 x 350 x 320 mm £4635.00
1050 x 350 x 320 mm £5255.00
1050 x 350 x 320 mm £6190.00
Price Each
Order Code Product Code Description 1+
WXL1804 6SE64000BP000AA1 Basic Operator Panel to suit Micromaster 420 & 440 £32.00
WXL0323 6SE64000AP000AA1 Advanced Operator Panel to suit Micromaster 420 & 440 £119.00
WXL1803 6SE64000BE000AA1 Basic Operator Panel to suit Micromaster 430 £32.00
WXL0324 6SE64000PM000AA0 For mounting Operator Panel on control cabinet door to IP56 £80.00
12
Drives & Soft Starters
Contact Brammer on 0870 240 2100 Drives & Soft Starters 279

Communication Devices
Price Each
Order Code Product Code Description Current Max. Dimensions
(H x W x D)
1+
WXL1167 ATV12H018M2 0.18kW 230V 1AC supply 1.4 143 x 72 x 102.2 mm £105.00
WXL1169 ATV12H037M2 0.37kW 230V 1AC supply 2.4 143 x 72 x 121.2 mm £116.00
WXL1170 ATV12H055M2 0.55kW 230V 1AC supply 3.5 143 x 72 x 131.2 mm £122.00
WXL1172 ATV12H075M2 0.75kW 230V 1AC supply 4.2 143 x 72 x 131.2 mm £129.00
WXL1173 ATV12HU15M2 1.5kW 230V 1AC supply 7.5 142 x 105 x 156.2 mm £194.00
WXL1174 ATV12HU22M2 2.2kW 230V 1AC supply 10 142 x 105 x 156.2 mm £225.00
WXL1166 ATV12H018F1 0.18kW 110V 1AC supply 1.4 143 x 72 x 102.2 mm £105.00
WXL1168 ATV12H037F1 0.37kW 110V 1AC supply 2.4 143 x 72 x 121.2 mm £116.00
WXL1171 ATV12H075F1 0.75kW 110V 1AC supply 4.2 142 x 105 x 156.2 mm £122.00
Altivar ATV312 Variable Speed Drives
This new generation of variable speed drives is a highly compact high performance drive enriched with
numerous functions enabling it to adapt to a vast array of applications (material handling, pumps, fans,
packaging etc...).
Ready to use due to its "plug and drive" design, the Altivar 312 is operational as soon as it is connected.
12
Drives & Soft Starters
Price Each
Order Code Product Code Description 1+
WXL0326 6SE64001PB000AA0 Remote connection to PROFIBUS network for Micromaster
420 or 440
WXL0327 6SE64001CB000AA0 Remote connection to CANbus network for Micromaster
420 or 440
WXL0328 6SE64001DN000AA0 Remote connection to deviceNet network for Micromaster
420 or 440
WXL0329 6SE64000EN000AA0 Allows connection of most HTL and TTL encoders to
Micromaster 440
Gland Plates
Enables shielded connection of the power and control cables
Ensures optimum EMC performance for electrical connection
Price Each
£107.00
£107.00
£107.00
£132.00
Order Code Product Code Description 1+
WXL0330 6SE64000GP000AA0 Gland plate for frame size "A" Micromaster 420 and
440
WXL0331 6SE64000GP000BA0 Gland plate for frame size "B" Micromaster 420 and
440
WXL0332 6SE64000GP000CA0 Gland plate for frame size "C" Micromaster 420 and
440
Telemecanique Variable Speed Drives
Altivar ATV12 Variable Speed Drives
This new generation of variable speed drives is a highly compact general performance drive for all constant
torque applications as well as pump and fan applications in the industrial market.
Ready to use due to its "plug and drive" design, the Altivar 12 is operational as soon as it is connected.
Altivar ATV12, Single Phase Supplied
£11.00
£18.00
£26.00
Altivar ATV312, Single Phase Supplied
Highly compact (one of the smallest drives in the market) IP20 chassis version
Simple to use, quick surf navigation button
Excellent motor performance with sensorless vector control
Inbuilt EMC filter and compliance to 61000-3-12 harmonic regulations
Order Code Product Code Description Current Max. Dimensions
(H x W x D)
Price Each
WXL1175 ATV312H018M2 0.18kW 230V 1AC supply 1.5 145 x 72 x 132 mm £134.00
WXL1176 ATV312H037M2 0.37kW 230V 1AC supply 3.3 145 x 72 x 132 mm £143.00
WXL1178 ATV312H055M2 0.55kW 230V 1AC supply 3.7 145 x 72 x 142 mm £165.00
WXL1180 ATV312H075M2 0.75kW 230V 1AC supply 4.8 145 x 72 x 142 mm £191.00
WXL1184 ATV312HU11M2 1.1kW 230V 1AC supply 6.9 143 x 107 x 152 mm £208.00
WXL1186 ATV312HU15M2 1.5kW 230V 1AC supply 8 143 x 107 x 152 mm £225.00
WXL1188 ATV312HU22M2 2.2kW 230V 1AC supply 11 184 x 142 x 152 mm £284.00
1+
Altivar ATV312, 3 Phase Supplied
Price Each
Order Code Product Code Description Current Max. Dimensions
(H x W x D)
1+
Highly compact, IP20 chassis version
Simple to use, quick surf navigation button
Excellent motor performance with sensorless vector control
Inbuilt EMC filter and compliance to 61000-3-12 harmonic regulations
110V and 230V 1AC supplied drives available (output voltage is 200..240V 3AC in either case)
WXL1177 ATV312H037N4 0.37kW 400V 3AC supply 1.5 143 x 107 x 152 mm £244.00
WXL1179 ATV312H055N4 0.55kW 400V 3AC supply 1.9 143 x 107 x 152 mm £267.00
WXL1181 ATV312H075N4 0.75kW 400V 3AC supply 2.3 143 x 107 x 152 mm £276.00
WXL1185 ATV312HU11N4 1.1kW 400V 3AC supply 3 143 x 107 x 152 mm £297.00
WXL1187 ATV312HU15N4 1.5kW 400V 3AC supply 4.1 143 x 107 x 152 mm £323.00
WXL1189 ATV312HU22N4 2.2kW 400V 3AC supply 5.5 184 x 142 x 152 mm £462.00
WXL1190 ATV312HU30N4 3kW 400V 3AC supply 7.1 184 x 142 x 152 mm £541.00
WXL1191 ATV312HU40N4 4kW 400V 3AC supply 9.5 184 x 142 x 152 mm £602.00
WXL1192 ATV312HU55N4 5.5kW 400V 3AC supply 14.3 232 x 180 x 172 mm £680.00
WXL1193 ATV312HU75N4 7.5kW 400V 3AC supply 17 232 x 180 x 172 mm £899.00
WXL1182 ATV312HD11N4 11kW 400V 3AC supply 27.7 329.5 x 245 x 192 mm £1074.00
WXL1183 ATV312HD15N4 15kW 400V 3AC supply 33 329.5 x 245 x 192 mm £1421.00
280
We work harder to save you money and downtime – Tel: 0870 240 2100

Altivar ATV31 Variable Speed Drives
A compact and high performance frequency inverter enriched with numerous functions enabling it to
adapt to a vast array of applications, constant and variable torque (material handling, pumps, fans,
packaging etc...)
ALTIVAR ATV31, Single Phase Supplied, IP54 Equipped
Altivar ATV61 Variable Speed Drives
The Altivar 61 drive has been designed for HVAC applications in both industrial and commercial environments.
Part of the new generation of Telemecanique drives, it gives exceptional performance, advanced
functions whilst keeping the emphasis on simplicity.
ALTIVAR ATV61, Single Phase Supplied, IP20
Equipped 'ZH28' IP54 version provides an inbuilt isolator, run and local speed controls (nonequipped
versions are also available)
Sensorless vector operation, giving ideal torque performance
Inbuilt EMC filter and compliance to 6100-3-12 harmonic regulations
Price Each
Order Code Product Code Power Current Max. Dimensions
(H x W x D)
WXL0623 ATV31C018M2ZH28 0.18kW 1.5 Amps 240 x 210 x 163 mm £370.00
WXL0624 ATV31C037M2ZH28 0.37kW 3.3 Amps 240 x 210 x 163 mm £390.00
WXL0625 ATV31C055M2ZH28 0.55kW 3.7 Amps 240 x 210 x 163 mm £416.00
WXL0626 ATV31C075M2ZH28 0.75kW 4.8 Amps 240 x 210 x 163 mm £437.00
WXL0627 ATV31CU11M2ZH28 1.1kW 6.9 Amps 297 x 215 x 192 mm £477.00
WXL0628 ATV31CU15M2ZH28 1.5kW 8 Amps 297 x 215 x 192 mm £517.00
WXL0629 ATV31CU22M2ZH28 2.2kW 11 Amps 340 x 230 x 208 mm £571.00
ALTIVAR ATV31, 3 Phase Supplied, IP54 Equipped
Order Code Product Code Power Current Max. Dimensions
(H x W x D)
Price Each
WXL0630 ATV31C037N4ZH28 0.37kW 1.5 Amps 297 x 215 x 192 mm £477.00
WXL0631 ATV31C055N4ZH28 0.55kW 1.9 Amps 297 x 215 x 192 mm £525.00
WXL0632 ATV31C075N4ZH28 0.75kW 2.3 Amps 297 x 215 x 192 mm £568.00
WXL0633 ATV31CU11N4ZH28 1.1kW 3 Amps 297 x 215 x 192 mm £615.00
WXL0634 ATV31CU15N4ZH28 1.5kW 4.1 Amps 297 x 215 x 192 mm £648.00
WXL0635 ATV31CU22N4ZH28 2.2kW 5.5 Amps 340 x 230 x 208 mm £724.00
WXL0636 ATV31CU30N4ZH28 3kW 7.1 Amps 340 x 230 x 208 mm £846.00
WXL0637 ATV31CU40N4ZH28 4kW 9.5 Amps 340 x 230 x 208 mm £929.00
WXL0638 ATV31CU55N4ZH28 5.5kW 14.3 Amps 512 x 320 x 282 mm £1299.00
WXL0639 ATV31CU75N4ZH28 7.5kW 17 Amps 512 x 320 x 282 mm £1564.00
WXL0640 ATV31CD11N4ZH28 11kW 27.7 Amps 625 x 440 x 282 mm £1929.00
WXL0641 ATV31CD15N4ZH28 15kW 33 Amps 625 x 440 x 282 mm £2554.00
For Cooper filters,
see our new Filtration
section
1+
1+
Industrial / Commercial HVAC specialist drive
IP20 and IP54 versions available
Full text graphic display supports easy set-up and fault finding
Wide application base support with multiple module support including extended I/O, multi-pump,
fieldbus and controller inside
Inbuilt EMC filter and compliance to 6100-3-12 harmonic regulations
Price Each
Order Code Product Code Power Current Max. Dimensions (H x W x D) 1+
WXL0642 ATV61H075M3 0.37kW 3 Amps 230 x 130 x 175 mm £252.00
WXL0643 ATV61HU15M3 0.75kW 4.8 Amps 230 x 130 x 175 mm £294.00
WXL0644 ATV61HU22M3 1.5kW 8 Amps 260 x 155 x 187 mm £344.00
WXL0645 ATV61HU30M3 2.2kW 11 Amps 260 x 155 x 187 mm £499.00
WXL0646 ATV61HU40M3*(1) 3kW 13.7 Amps 260 x 155 x 187 mm £628.00
WXL0647 ATV61HU55M3*(2) 4kW 17.5 Amps 295 x 175 x 187 mm £698.00
WXL0648 ATV61HU75M3*(2) 5.5kW 27.5 Amps 295 x 210 x 213 mm £991.00
ATV61 1AC Chokes
Price Each
Order Code Product Code Description 1+
WXL0649 VW3A58501 *(1) additional line choke for ATV61HU40M3 £77.00
WXL0650 VW3A58502 *(2) additional line choke for ATV61HU55M3 & ...75M3 £128.00
ALTIVAR ATV61, 3 Phase Supplied, IP20
Price Each
Order Code Product Code Power Current Max. Dimensions (H x W x D) 1+
WXL0651 ATV61H075N4 0.75kW 2.3 Amps 230 x 130 x 175 mm £306.00
WXL0652 ATV61HU15N4 1.5kW 4.1 Amps 230 x 130 x 175 mm £377.00
WXL0653 ATV61HU22N4 2.2kW 5.8 Amps 230 x 130 x 175 mm £474.00
WXL0654 ATV61HU30N4 3kW 7.8 Amps 260 x 155 x 187 mm £556.00
WXL0655 ATV61HU40N4 4kW 10.5 Amps 260 x 155 x 187 mm £616.00
WXL0656 ATV61HU55N4 5.5kW 14.3 Amps 295 x 175 x 187 mm £700.00
WXL0657 ATV61HU75N4 7.5kW 17.6 Amps 295 x 175 x 187 mm £925.00
WXL0658 ATV61HD11N4 11kW 27.7 Amps 295 x 210 x 213 mm £1136.00
WXL0659 ATV61HD15N4 15kW 33 Amps 400 x 230 x 213 mm £1503.00
WXL0660 ATV61HD18N4 18.5kW 41 Amps 400 x 230 x 213 mm £1875.00
WXL0661 ATV61HD22N4 22kW 48 Amps 420 x 240 x 236 mm £2256.00
WXL0662 ATV61HD30N4 30kW 66 Amps 550 x 240 x 266 mm £2550.00
WXL0663 ATV61HD37N4 37kW 79 Amps 550 x 240 x 266 mm £3105.00
12
Drives & Soft Starters
Contact Brammer on 0870 240 2100 Drives & Soft Starters 281

ALTIVAR ATV61, 3 Phase Supplied, IP54
Altivar ATV71 Variable Speed Drives
The Altivar 71 drive is part of the new generation of Telemecanique drives designed to meet the requirements
for the most demanding drive systems. It gives exceptional performance, advanced functions whilst
keeping the emphasis on simplicity.
ALTIVAR ATV71, Single Phase Supplied, IP20
12
Drives & Soft Starters
Order Code Product Code Description Current Max. Dimensions
(H x W x D)
Price Each
WXL1207 ATV61W075N4 0.75kW 2.3 Amps 490 x 235 x 272 mm £589.00
WXL1194 ATV61E5075N4 0.75kW c/w Isolator 2.3 Amos 490 x 235 x 272 mm £665.00
WXL1214 ATV61WU15N4 1.5kW 4.1 Amps 490 x 235 x 272 mm £638.00
WXL1201 ATV61E5U15N4 1.5kW c/w Isolator 4.1 Amps 490 x 235 x 272 mm £755.00
WXL1215 ATV61WU22N4 2.2kW 5.1 Amps 490 x 235 x 272 mm £829.00
WXL1202 ATV61E5U22N4 2.2kW c/w Isolator 5.1 Amps 490 x 235 x 272 mm £982.00
WXL1216 ATV61WU30N4 3kW 7.2 Amps 490 x 235 x 272 mm £938.00
WXL1203 ATV61E5U30N4 3kW c/w Isolator 7.2 Amps 490 x 235 x 272 mm £1111.00
WXL1217 ATV61WU40N4 4kW 9.1 Amps 490 x 235 x 286 mm £1015.00
WXL1204 ATV61E5U40N4 4kW c/w Isolator 9.1 Amps 490 x 235 x 286 mm £1201.00
WXL1218 ATV61WU55N4 5.5kW 12 Amps 490 x 235 x 286 mm £1257.00
WXL1205 ATV61E5U55N4 5.5kW c/w Isolator 12 Amps 490 x 235 x 286 mm £1489.00
WXL1219 ATV61WU75N4 7.5kW 16 Amps 525 x 255 x 286 mm £1561.00
WXL1206 ATV61E5U75N4 7.5kW c/w Isolator 16 Amps 525 x 255 x 286 mm £1849.00
WXL1208 ATV61WD11N4 11kW 22.5 Amps 525 x 255 x 286 mm £2070.00
WXL1195 ATV61E5D11N4 11kW c/w Isolator 22.5 Amps 525 x 255 x 286 mm £2278.00
WXL1209 ATV61WD15N4 15kW 30.5 Amps 560 x 290 x 315 mm £2620.00
WXL1196 ATV61E5D15N4 15kW c/w Isolator 30.5 Amps 560 x 290 x 315 mm £2883.00
WXL1210 ATV61WD18N4 18.5kW 37 Amps 665 x 310 x 315 mm £2816.00
WXL1197 ATV61E5D18N4 18.5kW c/w Isolator 37 Amps 665 x 310 x 315 mm £3098.00
WXL1211 ATV61WD22N4 22kW 43.5 Amps 665 x 310 x 315 mm £3218.00
WXL1198 ATV61E5D22N4 22kW c/w Isolator 43.5 Amps 665 x 310 x 315 mm £3538.00
WXL1212 ATV61WD30N4 30kW 58.5 Amps 720 x 284 x 315 mm £3571.00
WXL1199 ATV61E5D30N4 30kW c/w Isolator 58.5 Amps 720 x 284 x 315 mm £3929.00
WXL1213 ATV61WD37N4 37kW 71.5 Amps 880 x 284 x 343 mm £4208.00
WXL1200 ATV61E5D37N4 37kW c/w Isolator 71.5 Amps 880 x 284 x 343 mm £4861.00
1+
Sensorless and full flux vector operation, enabling option for full torque at zero speed
220% over torque enabling use in the most demanding applications
IP20 and IP54 versions available
Full text graphic display supports easy set-up and fault finding
Wide application base support with multiple module support including extended I/O, multi-pump,
fieldbus and controller inside
Inbuilt EMC filter and compliance to 6100-3-12 harmonic regulations
Price Each
Order Code Product Code Power Current Max. Dimensions
(H x W x D)
WXL0685 ATV71H075M3 0.37kW 3 Amps 230 x 130 x 175 mm £275.00
WXL0686 ATV71HU15M3 0.75kW 4.8 Amps 230 x 130 x 175 mm £344.00
WXL0687 ATV71HU22M3 1.5kW 8 Amps 260 x 155 x 187 mm £402.00
WXL0688 ATV71HU30M3 2.2kW 11 Amps 260 x 155 x 187 mm £554.00
WXL0689 ATV71HU40M3*(1) 3kW 13.7 Amps 260 x 155 x 187 mm £697.00
WXL0690 ATV71HU55M3*(2) 4kW 17.5 Amps 295 x 175 x 187 mm £775.00
WXL0691 ATV71HU75M3*(2) 5.5kW 27.5 Amps 295 x 210 x 213 mm £1101.00
ATV71 AC Chokes
Price Each
Order Code Product Code Description 1+
WXL0649 VW3A58501 *(1) additional line choke for ATV71HU40M3 £77.00
WXL0650 VW3A58502 *(2) additional line choke for ATV71HU55M3 & ...75M3 £128.00
ALTIVAR ATV71, 3 Phase Supplied, IP20
1+
Full technical support
available on Drives and
Soft Start products
Order Code Product Code Power Current Max. Dimensions (H x
W x D)
Price Each
WXL0692 ATV71H075N4 0.75kW 2.3 Amps 230 x 130 x 175 mm £423.00
WXL0693 ATV71HU15N4 1.5kW 4.1 Amps 230 x 130 x 175 mm £508.00
WXL0694 ATV71HU22N4 2.2kW 5.8 Amps 230 x 130 x 175 mm £609.00
WXL0695 ATV71HU30N4 3kW 7.8 Amps 260 x 155 x 187 mm £717.00
WXL0696 ATV71HU40N4 4kW 10.5 Amps 260 x 155 x 187 mm £757.00
WXL0697 ATV71HU55N4 5.5kW 14.3 Amps 295 x 175 x 187 mm £911.00
WXL0698 ATV71HU75N4 7.5kW 17.6 Amps 295 x 175 x 187 mm £1202.00
WXL0699 ATV71HD11N4 11kW 27.7 Amps 295 x 210 x 213 mm £1459.00
WXL0700 ATV71HD15N4 15kW 33 Amps 400 x 230 x 213 mm £1940.00
WXL0701 ATV71HD18N4 18.5kW 41 Amps 400 x 230 x 213 mm £2401.00
WXL0702 ATV71HD22N4 22kW 48 Amps 420 x 240 x 236 mm £2900.00
WXL0703 ATV71HD30N4 30kW 66 Amps 550 x 240 x 266 mm £3529.00
WXL0704 ATV71HD37N4 37kW 79 Amps 550 x 240 x 266 mm £4234.00
1+
282
FREE 24/7 technical support – Tel: 0870 240 2100

ALTIVAR ATV71, 3 Phase Supplied, IP54
Control Techniques Variable Speed Drives
Commander SK Variable Speed Drives
Commander SK is easy-to-drive and great value. The drive modules are ultra compact and offer excellent
motor control. With onboard intelligence, I/O, Ethernet and field bus communications options, Commander
SK allows you to do much more than you would expect from a general purpose drive.
Commander SK, 110V...230V Supplied
Price Each
Order Code Product Code Power Current Max. Dimensions (H x W x D) 1+
WXL1233 ATV71W075N4 0.75kW 2.3 Amps 490 x 235 x 272 mm £625.00
WXL1240 ATV71WU15N4 1.5kW 4.1 Amps 490 x 235 x 272 mm £701.00
WXL1241 ATV71WU22N4 2.2kW 5.8 Amps 490 x 235 x 272 mm £854.00
WXL1242 ATV71WU30N4 3kW 7.8 Amps 490 x 235 x 286 mm £1003.00
WXL1243 ATV71WU40N4 4kW 10.5 Amps 490 x 235 x 286 mm £1114.00
WXL1244 ATV71WU55N4 5.5kW 14.3 Amps 525 x 255 x 286 mm £1339.00
WXL1245 ATV71WU75N4 7.5kW 17.6 Amps 525 x 255 x 286 mm £1671.00
WXL1234 ATV71WD11N4 11kW 27.7 Amps 560 x 290 x 315 mm £2088.00
WXL1235 ATV71WD15N4 15kW 33 Amps 665 x 310 x 315 mm £2620.00
WXL1236 ATV71WD18N4 18.5kW 41 Amps 665 x 310 x 315 mm £3251.00
WXL1237 ATV71WD22N4 22kW 48 Amps 720 x 284 x 315 mm £3565.00
WXL1238 ATV71WD30N4 30kW 66 Amps 880 x 284 x 343 mm £4126.00
WXL1239 ATV71WD37N4 37kW 79 Amps 880 x 284 x 343 mm £4877.00
Altivar ATV61 & ATV71 Common Accessories
Price Each
Order Code Product Code Description 1+
WXL0724 VW3A3307 ATV61/71 Communication profibus DP card £146.00
WXL0725 VW3A3307S371 ATV61/71 Communication profibus DP V1 card £146.00
WXL0726 VW3A3309 ATV61/71 Communication devicenet card £146.00
WXL0728 VW3A1102 Graphic terminal IP54 mounting kit £42.00
WXL0729 VW3A1103 Accessory for IP65 mounting kit £22.00
WXL0730 VW3A1104R10 1M Cable for remote graphic terminal £13.00
WXL0731 VW3A1104R30 3M Cable for remote graphic terminal £19.00
WXL0732 VW3A1104R50 5M Cable for remote graphic terminal £24.00
WXL0733 VW3A1104R100 10M Cable for remote graphic terminal £31.00
WXL0734 VW3A1105 RJ45 female RJ45 female adaptor £19.00
WXL0735 VW3A3201 ATV61/71 Logic I O extension card £115.00
WXL0736 VW3A3202 ATV61/71 Analogue I O extension card £115.00
For Vacuum
Equipment,
see our Piab
section
Heavy Duty (HD) - 150% Overload for 60 Seconds
Normal Duty (ND) - 110% Overload for 215 Seconds
Ultra-compact modules resulting from advanced thermal design, state-of-the-art power technologies
and the use of a rigid SMC plastic chassis
Optimised for both heavy duty and fan and pump applications
Can be easily integrated within an automation system using Control Techniques click-in field bus
option modules including Profibus, DeviceNet and CanOpen
Ethernet connectivity allows global drive access for monitoring, configuring and troubleshooting
Optional SmartStick allows the drive configuration to be stored and replicated - ideal as a parameter
back up and for mass/batch production applications
Optional LogicStick adds program memory for onboard PLC functionality, adding intelligence to the
drive. This can remove the need for external PLCs and reduces size and costs
Easy to use remote mounting keypad with IP65 protection
Operation with global power supplies – 100V, 200V, 400V, 575V and 690V
The built in EMC filter is suitable for most applications and can be easily switched in or out of circuit.
When more arduous EMC standards must be met, such as for residential environments a range of
compact footprint mounting filters are available
The drive has an RS485 serial port as standard and is supplied with software and documentation CD
for easy configuration and monitoring
Low power drives may be mounted on DIN-rail for quick and easy installation
The drive has an integrated keypad with all the parameters you need for typical applications detailed
on the drive
Worldwide product expertise and support
Worldwide certifications including CE and UL
Price Each
Order Code Product Code Description Current Max. Dimensions
(H x W x D)
WXL1482 SKA1100025 0.25kW HD, 110V 1AC 1.7 Amps HD 140 x 75 x 145 mm £164.00
WXL1483 SKA1100037 0.37kW HD, 110V 1AC 2.2 Amps HD 140 x 75 x 145 mm £171.00
WXL1484 SKB1100075 0.75kW HD, 110V 1AC 4 Amps HD 190 x 85 x 156 mm £201.00
WXL1485 SKB1100110 1.1kW HD, 110V 1AC 5.2 Amps HD 190 x 85 x 156 mm £271.00
WXL1486 SKA1200025 0.25kW HD, 230V 1AC 1.7 Amps HD 140 x 75 x 145 mm £148.00
WXL1487 SKA1200037 0.37kW HD, 230V 1AC 2.2 Amps HD 140 x 75 x 145 mm £154.00
WXL1488 SKA1200055 0.55kW HD, 230V 1AC 3 Amps HD 140 x 75 x 145 mm £172.00
WXL1489 SKA1200075 0.75kW HD, 230V 1AC 4 Amps HD 140 x 75 x 145 mm £184.00
WXL1490 SKBD200110 1.1kW HD, 200-240V 1/3AC 5.2 Amps HD 190 x 85 x 156 mm £230.00
WXL1491 SKBD200150 1.5kW HD, 200-240V 1/3AC 7 Amps HD 190 x 85 x 156 mm £256.00
WXL1492 SKCD200220 2.2kW HD, 200-240V 1/3AC 9.6 Amps HD 240 x 100 x 173 mm £314.00
WXL1493 SKDD200300 3kW HD, 200-240V 1/3AC 12.6 Amps HD 300 x 115 x 198 mm £444.00
WXL1494 SKD3200400 4kW HD, 200-240V 3AC 17 Amps HD 300 x 115 x 198 mm £713.00
WXL1495 SK2201 3 HD / 4 ND, 200-240V 3AC 12.6 Amps HD / 15.5 368 x 155 x 219 mm £795.00
Amps ND
WXL1496 SK2202 4kW HD / 5.5kW ND, 200-240V 17 Amps HD / 22 368 x 155 x 219 mm £803.00
3AC
Amps ND
WXL1497 SK2203 5.5kW HD / 7.5kW ND, 200-
240V 3AC
25 Amps HD / 28
Amps ND
368 x 155 x 219 mm £929.00
WXL1498 SK3201 7.5kW HD / 11kW ND, 200-
240V 3AC
WXL1499 SK3202 11kW HD / 15kW ND, 200-
240V 3AC
WXL1500 SK4201 15kW HD / 18.5kW ND, 200-
240V 3AC
WXL1501 SK4202 18.5kW HD / 22kW ND, 200-
240V 3AC
WXL1502 SK4203 22kW HD / 30kW ND, 200-
240V 3AC
31 Amps HD / 42
Amps ND
42 Amps HD / 54
Amps ND
56 Amps HD / 68
Amps ND
68 Amps HD / 80
Amps ND
80 Amps HD / 104
Amps ND
1+
368 x 250 x 260 mm £1644.00
368 x 250 x 260 mm £1956.00
510 x 310 x 298 mm £2924.00
510 x 310 x 298 mm £3101.00
510 x 310 x 298 mm £3291.00
12
Drives & Soft Starters
Contact Brammer on 0870 240 2100 Drives & Soft Starters 283

12
Drives & Soft Starters
Commander SK, 400V 3AC Supplied
An external 24V DC, 10A heatsink fan power supply is required for models SK6401 & SK6402,
please refer to the SK options
Price Each
Order Code Product Code Power Current Max. Dimensions
(H x W x D)
WXL1503 SKB3400037 0.37kW HD 1.3A HD 190 x 85 x 156 mm £256.00
WXL1504 SKB3400055 0.55kW HD 1.7A HD 190 x 85 x 156 mm £292.00
WXL1505 SKB3400075 0.75kW HD 2.1A HD 190 x 85 x 156 mm £342.00
WXL1506 SKB3400110 1.1kW HD 2.8A HD 190 x 85 x 156 mm £379.00
WXL1507 SKB3400150 1.5kW HD 3.8A HD 190 x 85 x 156 mm £405.00
WXL1508 SKC3400220 2.2kW HD 5.1A HD 240 x 100 x 173 mm £441.00
WXL1509 SKC3400300 3kW HD 7.2A HD 240 x 100 x 173 mm £515.00
WXL1510 SKC3400400 4kW HD 9A HD 240 x 100 x 173 mm £541.00
WXL1511 SKD3400550 5.5kW HD 13A HD 300 x 115 x 198 mm £717.00
WXL1512 SKD3400750 7.5kW HD 16.5A HD 300 x 115 x 198 mm £913.00
WXL1513 SK2401 5.5kW HD / 7.5kW ND 13 A HD / 15.3 A ND 368 x 155 x 219 mm £763.00
WXL1514 SK2402 5.5kW HD / 7.5kW ND 16.5 A HD / 21 A ND 368 x 155 x 219 mm £994.00
WXL1515 SK2403 11kW HD / 15kW ND 25 A HD / 29 A ND 368 x 155 x 219 mm £1172.00
WXL1516 SK2404 15kW HD 29 A HD 368 x 155 x 219 mm £1591.00
WXL1517 SK3401 15kW HD / 18.5kW ND 32 A HD / 35 A ND 368 x 250 x 260 mm £1643.00
WXL1518 SK3402 18.5kW HD / 22kW ND 40 A HD / 43 A ND 368 x 250 x 260 mm £2312.00
WXL1519 SK3403 22kW HD / 30kW ND 46 A HD / 56 A ND 368 x 250 x 260 mm £2799.00
WXL1520 SK4401 30kW HD / 37kW ND 60 A HD / 68 A ND 510 x 310 x 298 mm £3032.00
WXL1521 SK4402 37kW HD / 45kW ND 74 A HD / 83 A ND 510 x 310 x 298 mm £3285.00
WXL1522 SK4403 45kW HD / 55kW ND 96 A HD / 104 A ND 510 x 310 x 298 mm £3791.00
WXL1523 SK5401 55kW HD / 75kW ND 124 A HD / 138 A ND 820 x 310 x 298 mm £5058.00
WXL1524 SK5402 75kW HD / 90kW ND 156 A HD / 168 A ND 820 x 310 x 298 mm £6450.00
WXL1525 SK6401 90kW HD / 110kW ND 180 A HD / 202 A ND 1131 x 310 x 298 mm £8543.00
WXL1526 SK6402 110kW HD / 132kW ND 210 A HD / 236 A ND 1131 x 310 x 298 mm £9038.00
Commander SK Options
Price Each
Order Code Product Code Description 1+
WXL1527 8510-0000 External 24V DC, 10A heatsink fan supply £133.00
WXL1528 SM-PROFIBUS-DP Profibus 12 M £184.00
WXL1529 SM-DEVICENET DeviceNet £181.00
WXL1530 SM-INTERBUS Interbus S £319.00
WXL1531 SM-CANOPEN CANopen £181.00
WXL1532 SM-ETHERNET Ethernet £474.00
WXL1533 SM-LON LONWorks £207.00
WXL1534 SM-ETHERCAT EtherCAT £488.00
WXL1535 SM-I/O-LITE I/O plus incremental encoder input £78.00
WXL1536 SM-I/O-TIMER As I/O Lite plus Real Time Clock £95.00
WXL1537 SM-PELV Isolated I/O to NAMUR NE37 £164.00
WXL1538 SM-I/O-24VPROTECTED I/O Module with over voltage protection £157.00
WXL1539 SM-I/O-120V Additional I/O to IEC6 1131-2 120VAC £143.00
WXL1540 SM-BIPOLAR I/O £42.00
WXL1541 SM-I/O-32 Extended digital I/O adding 32 bi-directional I/O points £152.00
WXL1542 SM-I/O-32-BREAKOUTBOX I/O £101.00
WXL1543 SM-I/O-32-KIT I/O £265.00
WXL1544 SK-KEYPAD-REMOTE Remote Keypad £62.00
WXL1545 SM-KEYPAD-PLUS LCD Keypad £184.00
WXL1546 CT-COMMS-LEAD-RS232 Isolated Serial Comms Lead - RS232 £48.00
WXL1547 CT-COMMS-LEAD-USB Isolated Serial Comms Lead - USB £99.00
WXL1548 SMARTSTICK Smartstick £22.00
WXL1549 LOGICSTICK LogicStick £62.00
For Plumbing tube
& fittings, see our
Process section
1+
Unidrive SP Variable Speed Drives
Unidrive SP is the market leader in intelligent drives; the Panel Mounting version is a standard drive
module for system integration and standalone applications. It is extremely flexible, with five modes
of operation:
Open loop V/Hz AC drive
Open loop Vector AC drive
Closed loop Vector AC drive
AC servo amplifier for rotary and linear motors
Regenerative (Active) power supply
Unidrive SP, 400V 3AC Supplied
Heavy Duty (HD) - 150% Overload for 60 Seconds
Normal Duty (ND) - 110% Overload for 215 Seconds
SP0 Keypads should be ordered for each drive as required (SP0401...SP0405), please refer to the SP options
SM Keypads should be ordered for each drive as required (SP1401...SP6402), please refer to the SP options
An external 24V DC, 10A heatsink fan power supply is required for models SP6401...
SP6402, please refer to the SP options
Universal drive and option module flexibility future proofs your investment, it also means you only fit
the features you need, reducing costs, removing complexity and increasing spares availability
The same control philosophy through the whole drives range reduces the learning curve
Unidrive SP can be easily configured to operate as a regenerative, active front end with power factor
control, eliminating harmonics and returning excess braking energy to the supply, further reducing
your energy costs
Scalable intelligence reduces the required cabinet size and increases system performance,
especially with high speed machines and motion applications
Unidrive SP can easily be integrated in an automation system using one or more click-in field bus
option modules. Profibus, DeviceNet, Ethernet/IP, CanOpen, SERCOS, LonWorks and Interbus are
fully supported and certified
Rotor Flux Control (RFC), a standard feature on Unidrive SP, is a step forward in open loop motor
control resulting in near closed loop performance with no feedback device
Compact design and reduced weight achieved through advanced thermal design, the use of low loss
IGBTs and a rigid SMC plastic chassis
Safe Torque Off feature reduces system costs in machine safety design
Ethernet connectivity allows global drive access for monitoring, configuring and troubleshooting
Product performance and reliability has been proven in hundreds of thousands of applications
Operation with global power supplies – 200V, 400V, 575V and 690V
Worldwide product expertise and support
Worldwide certifications including CE and UL
Price Each
Order Code
Product
Code
Power Current Max. Dimensions
(H x W x D)
WXL1550 SP0401 0.37kW HD 1.3 Amps HD 322 x 62 x 226 mm £789.00
WXL1551 SP0402 0.55kW HD 1.7 Amps HD 322 x 62 x 226 mm £805.00
WXL1552 SP0403 0.75kW HD 2.1 Amps HD 322 x 62 x 226 mm £846.00
WXL1553 SP0404 1.1kW HD 3 Amps HD 322 x 62 x 226 mm £887.00
WXL1554 SP0405 1.5kW HD 4.2 Amps HD 322 x 62 x 226 mm £932.00
WXL1555 SP1401 0.75kW HD / 1.1kW ND 2.1 Amps HD / 2.8 Amps ND 368 x 100 x 219 mm £941.00
WXL1556 SP1402 1.1kW HD / 1.5kW ND 3 Amps HD / 3.8 Amps ND 368 x 100 x 219 mm £990.00
WXL1557 SP1403 1.5kW HD / 2.2kW ND 4.2 Amps HD / 5 Amps ND 368 x 100 x 219 mm £1060.00
WXL1558 SP1404 2.2kW HD / 3kW ND 5.8 Amps HD / 6.9 Amps ND 368 x 100 x 219 mm £1185.00
WXL1559 SP1405 3kW HD / 4kW ND 7.6 Amps HD / 8.8 Amps ND 368 x 100 x 219 mm £1264.00
WXL1560 SP1406 4kW HD / 5.5kW ND 9.5 Amps HD / 11 Amps ND 368 x 100 x 219 mm £1367.00
WXL1561 SP2401 5.5kW HD / 7.5kW ND 13 Amps HD / 15.3 Amps ND 368 x 155 x 219 mm £1715.00
WXL1562 SP2402 5.5kW HD / 7.5kW ND 16.5 Amps HD / 21 Amps ND 368 x 155 x 219 mm £2049.00
WXL1563 SP2403 11kW HD / 15kW ND 25 Amps HD / 29 Amps ND 368 x 155 x 219 mm £2832.00
1+
284
Everything you need – when you need it – Tel: 0870 240 2100

Order Code
Product
Code
Power Current Max. Dimensions
(H x W x D)
WXL1564 SP2404 15kW HD 29 Amps HD 368 x 155 x 219 mm £3257.00
WXL1565 SP3401 15kW HD / 18.5kW ND 32 Amps HD / 35 Amps ND 368 x 250 x 260 mm £3613.00
WXL1566 SP3402 18.5kW HD / 22kW ND 40 Amps HD / 43 Amps ND 368 x 250 x 260 mm £4542.00
WXL1567 SP3403 22kW HD / 30kW ND 46 Amps HD / 56 Amps ND 368 x 250 x 260 mm £5086.00
WXL1568 SP4401 30kW HD / 37kW ND 60 Amps HD / 68 Amps ND 510 x 310 x 298 mm £5440.00
WXL1569 SP4402 37kW HD / 45kW ND 74 Amps HD / 83 Amps ND 510 x 310 x 298 mm £6502.00
WXL1570 SP4403 45kW HD / 55kW ND 96 Amps HD / 104 Amps ND 510 x 310 x 298 mm £7829.00
WXL1571 SP5401 55kW HD / 75kW ND 124 Amps HD / 138 Amps ND 820 x 310 x 298 mm £8634.00
WXL1572 SP5402 75kW HD / 90kW ND 156 Amps HD / 168 Amps ND 820 x 310 x 298 mm £9429.00
WXL1573 SP6401 90kW HD / 110kW ND 180 Amps HD / 202 Amps ND 1131 x 310 x 298 mm £9808.00
WXL1574 SP6402 110kW HD / 132kW ND 210 Amps HD / 236 Amps ND 1131 x 310 x 298 mm £10328.00
1+
MENTOR MP, Two Quadrant, 400V 3AC Supplied
Unidrive SP Options
Price Each
Order Code Product Code Description 1+
WXL1575 SP0-KEYPAD SP0 Keypad £37.00
WXL1576 SM-KEYPAD LED Keypad £68.00
WXL1545 SM-KEYPAD-PLUS LCD Keypad £184.00
WXL1527 8510-0000 External 24V DC, 10A heatsink fan supply £133.00
WXL1528 SM-PROFIBUS-DP Profibus 12 M £184.00
WXL1529 SM-DEVICENET DeviceNet £181.00
WXL1530 SM-INTERBUS Interbus S £319.00
WXL1577 SM-CAN CAN £181.00
WXL1531 SM-CANOPEN CANopen £181.00
WXL1578 SM-SERCOS SERCOS £493.00
WXL1532 SM-ETHERNET Ethernet £474.00
WXL1533 SM-LON LONWorks £207.00
WXL1534 SM-ETHERCAT EtherCAT £488.00
WXL1579 SM-APPLICATIONS Applications Processor with CT Net £441.00
WXL1580 SM-APPLICATIONS-LITE Applications Processor £244.00
WXL1581 SM-APPLICATIONS-PLUS Applications Processor with CT Net (Faster) £588.00
WXL1582 SM-APPLICATIONS-LITE-V2 Applications Processor (Faster) £244.00
WXL1583 SM-REGISTER High Speed Motion & Registration Control £1049.00
WXL1584 SM-I/O-PLUS Extended I/O Interface £143.00
WXL1535 SM-I/O-LITE I/O plus incremental encoder input £78.00
WXL1536 SM-I/O-TIMER As I/O Lite plus Real Time Clock £95.00
WXL1537 SM-PELV Isolated I/O to NAMUR NE37 £164.00
WXL1538 SM-I/O-24VPROTECTED Over voltage protected I/O Solution Module £157.00
WXL1539 SM-I/O-120V Additional I/O conforming to IEC6 1131-2 £143.00
WXL1541 SM-I/O-32 Extended digital I/O adding 32 bi-directional I/O points £152.00
WXL1542 SM-I/O-32-BREAKOUTBOX I/O £101.00
WXL1543 SM-I/O-32-KIT I/O £265.00
WXL1585 SM-ENCODER-PLUS Additional Incremental Encoder Interface £145.00
WXL1586 SM-UNIV-ENCODER-PLUS Additional Universal Encoder Interface £228.00
WXL1587 SM-ENCODER-OUT-PLUS Encoder Output Plus £196.00
WXL1588 SM-SLM SLM £311.00
WXL1589 SM-RESOLVER Resolver £215.00
WXL1590 SM-EZMOTION EZMotion £759.00
WXL1591 CT-15-WAY-D-CNVTR 15-Way D-Type Connector £32.00
WXL1592 CT-15-WAY-ENC-CNVTR 15-Way D-Type Connector - Option £32.00
WXL1593 CT -COMMS-LEAD-RS232 Isolated Serial Comms Lead - RS232 £48.00
WXL1547 CT-COMMS-LEAD-USB Isolated Serial Comms Lead - USB £99.00
WXL1594 CT-RJ45-SPLITTERCABLE RJ45 Splitter Cable £32.00
WXL1595 SMARTCARD SmartCard £3.00
Mentor MP DC Drives
Mentor MP is Control Techniques 5th generation DC drive and integrates the control platform from the world’s leading
intelligent AC drive, Unidrive SP. This makes Mentor MP the most advanced DC drive available, giving optimum performance
and flexible system interfacing capability.
There are large numbers of DC motors in service throughout the world in various applications, the majority of which
are easily capable of providing continued service. Upgrading your drive allows you to maximise the motor performance,
enhance system reliability and interface digitally with modern control equipment using Ethernet and Field bus networks.
Downtime is minimised as only the drive needs to be replaced.
DC drive technology remains cost effective, efficient and is relatively simple to implement. For new solutions DC provides
many advantages, especially for regenerative and high power applications.
Keypads should be ordered for each drive as required, please refer to the MP options
Unparalleled flexibility through the integration of Control Techniques AC control platform on a DC drive
Maximum reliability achieved through unique protection system against poor industrial power
supplies and lightning strikes
Protected control circuits, galvanically isolated from the high voltage circuitry using unique patented
(pending) technology
System integration with modern communication networks including, Ethernet, EtherCAT and PROFIBUS
Easy replacement for Mentor II with the same dimensions, power connection locations and easy to
use software conversion tools
6, 12 and 24 pulse systems for reduced harmonics
RoHS compliant
Price Each
Order Code Product Code Power Current Max. Dimensions (H x W x D) 1+
WXL1596 MP25A4 9 25 370 x 250 x 222 mm £1766.00
WXL1597 MP45A4 15 45 370 x 250 x 222 mm £2042.00
WXL1598 MP75A4 27 75 370 x 250 x 222 mm £2287.00
WXL1599 MP105A4 38 105 370 x 250 x 251 mm £2709.00
WXL1600 MP155A4 56 155 370 x 250 x 251 mm £2866.00
WXL1601 MP210A4 75 210 370 x 250 x 251 mm £3785.00
WXL1602 MP350A4 125 350 423 x 450 x 301 mm £4352.00
WXL1603 MP420A4 150 420 423 x 450 x 301 mm £4741.00
WXL1604 MP550A4 200 550 423 x 450 x 301 mm £5893.00
WXL1605 MP700A4 250 700 423 x 450 x 301 mm £7195.00
WXL1606 MP825A4 300 825 423 x 450 x 301 mm £8879.00
WXL1607 MP900A4 340 900 423 x 450 x 301 mm £11846.00
WXL1608 MP1200A4 450 1200 1045 x 450 x 611 mm £13970.00
WXL1609 MP1850A4 700 1850 1045 x 450 x 611 mm £14950.00
MENTOR MP, Four Quadrant, 400V 3AC Supplied
Price Each
Order Code Product Code Power Current Max. Dimensions (H x W x D) 1+
WXL1610 MP25A4R 9 25 370 x 250 x 222 mm £2701.00
WXL1611 MP45A4R 15 45 370 x 250 x 222 mm £3038.00
WXL1612 MP75A4R 27 75 370 x 250 x 222 mm £3356.00
WXL1613 MP105A4R 38 105 370 x 250 x 251 mm £3827.00
WXL1614 MP155A4R 56 155 370 x 250 x 251 mm £4519.00
WXL1615 MP210A4R 75 210 370 x 250 x 251 mm £5736.00
WXL1616 MP350A4R 125 350 423 x 450 x 301 mm £6497.00
WXL1617 MP420A4R 150 420 423 x 450 x 301 mm £7582.00
WXL1618 MP550A4R 200 550 423 x 450 x 301 mm £8292.00
WXL1619 MP700A4R 250 700 423 x 450 x 301 mm £10353.00
WXL1620 MP825A4R 300 825 423 x 450 x 301 mm £12168.00
WXL1621 MP900A4R 340 900 423 x 450 x 301 mm £17110.00
WXL1622 MP1200A4R 450 1200 1505 x 450 x 611 mm £20251.00
WXL1623 MP1850A4R 700 1850 1505 x 450 x 611 mm £21606.00
MENTOR MP Options
Price Each
Order Code Product Code Description 1+
WXL1576 SM-KEYPAD LED Keypad £68.00
WXL1624 MP-LCD-KEYPAD LCD Keypad £184.00
WXL1625 FXMP25 Field controller £920.00
12
Drives & Soft Starters
Contact Brammer on 0870 240 2100 Drives & Soft Starters 285

WEG Variable Speed Drives
WEG CFW11, 3 Phase IP54
WEG CFW11, 3 Phase IP20
12
Drives & Soft Starters
1.5 to 400kW (1.5..90kW Heavy Duty listed)
380 - 480 V with integral RFI Filter to IEC61800-3
Symmetrically connected DC link inductors in compliance with IEC61000 -3 -12 standard
requirements regarding harmonics (no need for external line reactance)
Supplied with back lit graphic Keypad and Memory Module
Linear and Adjustable V/F Control Modes, Open and Closed Loop Vector Modes
Optimal / Dynamic Braking via integrated Brake Chopper
6 Digital Inputs / 3 Relay Outputs
2 Analogue Inputs / 2 Analogue Outputs
Additional Plug and Play expansion modules (I/O, encoder and communications module)
Intergrated Soft-PLC for customisation ( via IEC61131 -3 WEG WLP programming software)
Intelligent thermal management permits full protection of IGBTs, monitoring of heatsink and internal
air temperature
Normal Duty and Heavy Duty ratings to adapt optimally to all kinds of load
Comprehensive Drive and Motor Protections with fault and alarm warnings
Motor overload protection in compliance with IEC 60947 - 4 -2/UL 508 C
Oriented start -up facilitates initial user programming
Real time clock
TRACE / SCOPE function to assist with the start -up and problems diagnosis
USB Connectivity for programming and monitoring
PID Regulator
Order Code Product Code Power Current Max. Dimensions
(H x W x D)
Price Each
WXL1257 CFW110003T4OFAZ 1.5kW 3.6A 247 x 145 x 227 mm £550.00
WXL1259 CFW110005T4OFAZ 2.2kW 5A 247 x 145 x 227 mm £580.00
WXL1261 CFW110007T4OFAZ 2.2kW HD / 5.5A HD / 7A ND 247 x 145 x 227 mm £590.00
3kW ND
WXL1263 CFW110010T4OFAZ 3kW HD / 7A HD / 10A ND 247 x 145 x 227 mm £596.00
4kW ND
WXL1265 CFW110013T4OFAZ 4kW HD / 5.5kW 11A HD / 13.5A ND 247 x 145 x 227 mm £666.00
ND
WXL1267 CFW110017T4OFAZ 5.5kW HD / 13.5A HD / 17A ND 293 x 190 x 227 mm £768.00
7.5kW ND
WXL1269 CFW110024T4OFAZ 7.5kW HD / 19A HD / 24A ND 293 x 190 x 227 mm £860.00
11kW ND
WXL1271 CFW110031T4OFAZ 11kW HD / 25A HD / 31A ND 293 x 190 x 227 mm £1164.00
15kW ND
WXL1273 CFW110038T4OFAZ 15kW HD / 33A HD / 38A ND 378 x 220 x 293 mm £1346.00
18.5kW ND
WXL1275 CFW110045T4OFAZ 18.5kW HD / 38A HD / 45A ND 378 x 220 x 293 mm £1536.00
22kW ND
WXL1277 CFW110058T4OFAZ 22kW HD / 47A HD / 58.5A ND 378 x 220 x 293 mm £1860.00
30kW ND
WXL1279 CFW110070T4OFAZ 30kW HD / 61A HD / 70.5A ND 504 x 300 x 305 mm £2342.00
37kW ND
WXL1281 CFW110088T4OFAZ 37kW HD / 73A HD / 88A ND 504 x 300 x 305 mm £2620.00
45kW ND
WXL1845 CFW110105T4DBZ 45kW HD / 88A HD / 105A ND 620 x 334 x 358 mm £3358.00
55kW ND
WXL1846 CFW110142T4DBZ 55kW HD / 115A HD / 142A ND 620 x 334 x 358 mm £4138.00
75kW ND
WXL1847 CFW110180T4DBZ 75kW HD / 142A HD / 180A ND 620 x 334 x 358 mm £4808.00
90kW ND
WXL1848 CFW110211T4DBZ 90kW HD /
110kW ND
180A HD / 211A ND 620 x 334 x 358 mm £5300.00
1+
1.5 to 400kW (1.5..37kW Heavy Duty listed)
380 - 480 V with integral RFI Filter to IEC61800-3
Symmetrically connected DC link inductors in compliance with IEC61000 -3 -12 standard
requirements regarding harmonics (no need for external line reactance)
Supplied with back lit graphic Keypad and Memory Module
Linear and Adjustable V/F Control Modes, Open and Closed Loop Vector Modes
Optimal / Dynamic Braking via integrated Brake Chopper
6 Digital Inputs / 3 Relay Outputs
2 Analogue Inputs / 2 Analogue Outputs
Additional Plug and Play expansion modules (I/O, encoder and communications module)
Intergrated Soft-PLC for customisation ( via IEC61131 -3 WEG WLP programming software)
Intelligent thermal management permits full protection of IGBTs, monitoring of heatsink and internal
air temperature
Normal Duty and Heavy Duty ratings to adapt optimally to all kinds of load
Comprehensive Drive and Motor Protections with fault and alarm warnings
Motor overload protection in compliance with IEC 60947 - 4 -2/UL 508 C
Oriented start -up facilitates initial user programming
Real time clock
TRACE / SCOPE function to assist with the start -up and problems diagnosis
USB Connectivity for programming and monitoring
PID Regulator
Price Each
Order Code Product Code Power Current Max. Dimensions
(H x W x D)
WXL1256 CFW110003T4O54FAZ 1.5kW 3.6A 450 x 255 x 235 mm £644.00
WXL1258 CFW110005T4O54FAZ 2.2kW 5A 450 x 255 x 235 mm £662.00
WXL1260 CFW110007T4O54FAZ 2.2kW HD /
3kW ND
WXL1262 CFW110010T4O54FAZ 3kW HD /
4kW ND
WXL1264 CFW110013T4O54FAZ 4kW HD /
5.5kW ND
WXL1266 CFW110017T4O54FAZ 5.5kW HD /
7.5kW ND
WXL1268 CFW110024T4O54FAZ 7.5kW HD /
11kW ND
WXL1270 CFW110031T4O54FAZ 11kW HD /
15kW ND
WXL1272 CFW110038T4O54FAZ 15kW HD /
18.5kW ND
WXL1274 CFW110045T4O54FAZ 18.5kW HD /
22kW ND
WXL1276 CFW110058T4O54FAZ 22kW HD /
30kW ND
WXL1278 CFW110070T4O54FAZ 30kW HD /
37kW ND
WXL1280 CFW110088T4O54FAZ 37kW HD /
45kW ND
5.5A HD / 7A ND 450 x 255 x 235 mm £672.00
7A HD / 10A ND 450 x 255 x 235 mm £686.00
11A HD / 13.5A ND 450 x 255 x 235 mm £764.00
13.5A HD / 17A ND 450 x 255 x 235 mm £876.00
19A HD / 24A ND 450 x 255 x 235 mm £990.00
25A HD / 31A ND 450 x 255 x 235 mm £1280.00
33A HD / 38A ND 675 x 350 x 298 mm £1534.00
38A HD / 45A ND 675 x 350 x 298 mm £1722.00
47A HD / 58.5A ND 675 x 350 x 298 mm £2082.00
61A HD / 70.5A ND 675 x 350 x 298 mm £2456.00
73A HD / 88A ND 675 x 350 x 298 mm £2882.00
Note: HD = Heavy Duty, 150% overload for 60 Seconds. ND = Normal Duty, 110% overload for 60 seconds.
1+
Note: HD = Heavy Duty, 150% overload for 60 Seconds. ND = Normal Duty, 110% overload for 60 seconds.
286
Nationwide coverage, delivered locally same or next day – Tel: 0870 240 2100

WEG CFW700, 3 Phase IP20
Order Code Product Code Description 1+
WXL1091 11008100-ENC-01 Incremental encoder module, 5...12 VDC at
£128.00
100kHz, with encoder signal repeater
WXL1092 11008107-PROFDP-05 Profibus DP interface module £320.00
WXL1093 11008158-DEVICENET-05 DeviceNet interface module £376.00
WXL1085 10933688-ETHERNET/IP-05 EtherNet/IP interface module £376.00
WXL1094 11008911-PLC11-01 PLC functions, ladder programming, 9 x DI, 3 x
DO, 1 x Ain, 2 x Aout, 2 x encoder interfaces
£542.00
WEG CFW08 WASH IP66
1.5 to 18.5kW (Heavy Duty)
380 - 480 V with integral RFI Filter to IEC61800-3
Symmetrically connected DC link inductors in compliance with IEC61000 -3 -12 standard
requirements regarding harmonics (no need for external line reactance)
Supplied with back lit numerical keypad
Linear and Adjustable V/F Control Modes, Open and Closed Loop Vector Modes
Intergrated encoder input (5vdc)
Optimal / Dynamic Braking via integrated Brake Chopper
8 Digital Inputs / 1 Relay & 4 Digital Outputs
2 Analogue Inputs / 2 Analogue Outputs
Additional Plug and Play communications modules
Embedded RS485 Port with Modbus RTU Protocol as standard
Intergrated Soft-PLC for customisation ( via IEC61131 -3 WEG WLP programming software)
Intelligent thermal management permits full protection of IGBTs, monitoring of heatsink and internal
air temperature
Normal Duty and Heavy Duty ratings to adapt optimally to all kinds of load
Comprehensive Drive and Motor Protections with fault and alarm warnings
Motor overload protection in compliance with IEC 60947 - 4 -2/UL 508 C
Oriented start -up facilitates initial user programming
TRACE / SCOPE function to assist with the start -up and problems diagnosis
PID Regulator
Price Each
12
Drives & Soft Starters
Order Code Product Code Power Current Max. Dimensions
(HxWxD)
1+
WXL1849 CFW700A03P6T4DB20C3 1.5kW 3.6A HD 247 x 145 x 227 mm £454.00
WXL1850 CFW700A05P0T4DB20C3 2.2kW 5A HD 247 x 145 x 227 mm £478.00
WXL1851 CFW700A07P0T4DB20C3 2.2kW HD /
3kW ND
5.5A HD / 7A ND 247 x 145 x 227 mm £486.00
WXL1852 CFW700A10P0T4DB20C3 4kW 10A HD 247 x 145 x 227 mm £528.00
WXL1853 CFW700A13P5T4DB20C3 4kW HD /
5.5kW ND
WXL1854 CFW700B17P0T4DB20C3 5.5kW HD /
7.5kW ND
WXL1855 CFW700B24P0T4DB20C3 9.2kW HD /
11kW ND
WXL1856 CFW700B31P0T4DB20C3 11kW HD /
15kW ND
WXL1857 CFW700C38P0T4DB20C3 15kW HD /
18.5kW ND
WXL1858 CFW700C45P0T4DB20C3 18.5kW HD /
22kW ND
11A HD / 13.5A ND 247 x 145 x 227 mm £574.00
13.5A HD / 17A ND 293 x 190 x 227 mm £650.00
19A HD / 24A ND 293 x 190 x 227 mm £726.00
25A HD / 31A ND 293 x 190 x 227 mm £970.00
33A HD / 38A ND 378 x 220 x 293 mm £1136.00
38A HD / 45A ND 378 x 220 x 293 mm £1296.00
Note: HD = Heavy Duty, 150% overload for 60 Seconds. ND = Normal Duty, 110% overload for 60 seconds.
IP66 / NEMA 4X Washdown enclosure
1.5...2.2kW 230V 1AC input, 1.1...15kW 400V 3AC input
Buit-in EMC class A filter
Built-in membrane keypad
Brake chopper built in on all models
High starting torque, 150% overload capacity
V/F (Scalar) or SLVC
Operating range 0...300Hz
4 x Programmable digital inputs
2 x Programmable relay outputs
2 x Programmable analogue inputs
1 x Programmable analogue output
PID regulator
Communication modules and multi-pump control cards also available
Price Each
WEG CFW11 Accessories
Price Each
Order Code Product Code Description 1+
WXL1096 11010521-RHMIF-01 Frame for keypad remote assembly £18.00
WXL1095 11008912-MMF-01 Flash memory module £18.00
WXL1086 10950192-HMI-CAB-RS-1M 1m Remote keypad cable £16.00
WXL1088 10951226-HMI-CAB-RS-2M 2m Remote keypad cable £18.00
WXL1087 10951223-HMI-CAB-RS-3M 3m Remote keypad cable £20.00
WXL1089 10951227-HMI-CAB-RS-5M 5m Remote keypad cable £22.00
WXL1090 10951239-HMI-CAB-RS-10M 10m Remote keypad cable £30.00
Order
Code
Product Code Supply Power Current
Max.
Dimensions
(H x W x D)
WXL1249 CFW080073B2024EON4A1FAZ 230V 1AC 1.5kW 7.3A 265 x 165 x 216 mm £394.00
WXL1250 CFW080100B2024EON4A1FAZ 230V 1AC 2.2kW 10A 265 x 165 x 216 mm £430.00
WXL1246 CFW080027T3848EON4A1FAZ 400V 3AC 1.1kW 2.7A 265 x 165 x 216 mm £356.00
WXL1247 CFW080043T3848EON4A1FAZ 400V 3AC 1.5kW 4.3A 265 x 165 x 216 mm £414.00
WXL1248 CFW080065T3848EON4A1FAZ 400V 3AC 3kW 6.5A 265 x 165 x 216 mm £458.00
WXL1251 CFW080100T3848EON4A1FAZ 400V 3AC 4kW 10A 265 x 165 x 216 mm £510.00
WXL1252 CFW080130T3848EON4A1FAZ 400V 3AC 5.5kW 13A 340 x 215 x 216 mm £656.00
WXL1253 CFW080160T3848EON4A1FAZ 400V 3AC 7.5kW 16A 340 x 215 x 216 mm £752.00
WXL1254 CFW080240T3848EON4A1FAZ 400V 3AC 11kW 24A 340 x 215 x 216 mm £862.00
WXL1255 CFW080300T3848EON4A1FAZ 400V 3AC 15kW 30A 340 x 215 x 216 mm £1110.00
1+
Contact Brammer on 0870 240 2100 Drives & Soft Starters 287

Schneider Enclosures & Accessories
S3D IP66 Steel Wall Mounting Enclosures
Enclosures
Supplied with chassis plate
IP55 rating for single and double doors (2D) conforming to IEC
IK10 (plain door) resistance to external mechanical impact
Frame comes with perforated rails at the front for easy installation of accessories
Textured polyester powder paint finish, colour grey (RAL7035)
Door handles come with inserts as standard
Price Each
Order Code Product Code Dimensions (H x W x D) 1+
WXL1638 NSYSM1610302DP 1600 x 1000 x 300 mm £546.55
WXL1639 NSYSM1610402DP 1600 x 1000 x 400 mm £558.38
WXL1640 NSYSM1612302DP 1600 x 1200 x 300 mm £616.26
WXL1641 NSYSM1612402DP 1600 x 1200 x 400 mm £627.52
WXL1642 NSYSM16630P 1600 x 600 x 300 mm £384.27
WXL1643 NSYSM16640P 1600 x 600 x 400 mm £391.44
WXL1644 NSYSM1810502DP 1800 x 1000 x 500 mm £605.90
WXL1645 NSYSM1812402DP 1800 x 1200 x 400 mm £585.83
WXL1646 NSYSM1812502DP 1800 x 1200 x 500 mm £729.59
WXL1647 NSYSM1816402DP 1800 x 1600 x 400 mm £754.80
WXL1648 NSYSM1816502DP 1800 x 1600 x 500 mm £853.80
12
Drives & Soft Starters
Supplied with chassis plate
Plain door with plain galvanised chassis
Textured polyester powder paint finish, colour grey (RAL7035)
IP66 protection, IK10 external mechanical impact resistance
Door easily removable and reversible with double thickness 20cm return fold for excellent rigidity
Enclosure supplied as standard with 3mm double bar lock
Door handles supplied functions both as an operating key and as a tool for removing stud protective
caps
Price Each
Order Code Product Code Dimensions (H x W x D) 1+
WXL1626 NSYS3D3215P 300 x 200 x 150 mm £42.07
WXL1627 NSYS3D3315P 300 x 300 x 150 mm £44.92
WXL1628 NSYS3D3320P 300 x 300 x 200 mm £47.70
WXL1629 NSYS3D4315P 400 x 300 x 150 mm £49.59
WXL1630 NSYS3D4320P 400 x 300 x 200 mm £55.13
WXL1631 NSYS3D4420P 400 x 400 x 200 mm £60.11
WXL1632 NSYS3D5420P 500 x 400 x 200 mm £74.77
WXL1633 NSYS3D6420P 600 x 400 x 200 mm £77.88
WXL1634 NSYS3D6620P 600 x 600 x 200 mm £94.08
WXL1635 NSYS3D8625P 800 x 600 x 250 mm £139.12
SF Extendible IP55 Steel Floor Standing Enclosures
Enclosures
Accessories
Price Each
Order Code Product Code Description 1+
WXL1636 NSYAEFPFSC SWM steel wall fixing lugs (4) £4.98
WXL1637 NSYAEDL1242S3D S3D 1242E key handle £6.94
IP55 rating for single and double doors (2D) conforming to IEC
IK10 (plain door) resistance to external mechanical impact
18 fold profile, makes framework the strongest in the market
Textured polyester powder paint finish, colour grey (RAL7035)
Available with or without mounting plate
Door handle comes with lock insert as standard
Price Each
SM Compact IP55 Steel Floor Standing Enclosures
Enclosures
Order Code Product Code Description 1+
WXL1649 NSYSF16860 Without mount plate 1600 x 800 x 600 mm £346.82
WXL1650 NSYSF16860P With mount plate 1600 x 800 x 600 mm £398.48
WXL1651 NSYSF16880 Without mount plate 1600 x 800 x 800 mm £419.55
WXL1652 NSYSF16880P With mount plate 1600 x 800 x 800 mm £479.37
WXL1653 NSYSF181040 Without mount plate 1800 x 1000 x 400 mm £443.41
WXL1654 NSYSF1810402D Without mount plate, 2 doors, 1800 x 1000 x 400 mm £509.91
WXL1655 NSYSF1810402DP With mount plate, 2 doors, 1800 x 1000 x 400 mm £554.82
WXL1656 NSYSF181040P With mount plate 1800 x 1000 x 400 mm £490.31
WXL1657 NSYSF181050 Without mount plate 1800 x 1000 x 500 mm £452.65
WXL1658 NSYSF181050P With mount plate 1800 x 1000 x 500 mm £499.27
WXL1659 NSYSF181060 Without mount plate 1800 x 1000 x 600 mm £461.88
WXL1660 NSYSF1810602D Without mount plate, 2 doors, 1800 x 1000 x 600 mm £557.72
WXL1661 NSYSF1810602DP With mount plate, 2 doors, 1800 x 1000 x 600 mm £621.86
WXL1662 NSYSF181060P With mount plate 1800 x 1000 x 600 mm £508.23
WXL1663 NSYSF1812402D Without mount plate, 2 doors, 1800 x 1200 x 400 mm £551.34
WXL1664 NSYSF1812402DP With mount plate, 2 doors, 1800 x 1200 x 400 mm £610.20
288
90 Brammer Sales & Service Centres nationwide – Tel: 0870 240 2100

Order Code Product Code Description 1+
WXL1665 NSYSF1812502D Without mount plate, 2 doors, 1800 x 1200 x 500 mm £566.71
WXL1666 NSYSF1812502DP With mount plate, 2 doors, 1800 x 1200 x 500 mm £621.42
WXL1667 NSYSF1812602D Without mount plate, 2 doors, 1800 x 1200 x 600 mm £578.29
WXL1668 NSYSF1812602DP With mount plate, 2 doors, 1800 x 1200 x 600 mm £632.63
WXL1669 NSYSF18440 Without mount plate 1800 x 400 x 400 mm £321.83
WXL1670 NSYSF18450 Without mount plate 1800 x 400 x 500 mm £328.54
WXL1671 NSYSF18460 Without mount plate 1800 x 400 x 600 mm £335.24
WXL1672 NSYSF18640 Without mount plate 1800 x 600 x 400 mm £339.72
WXL1673 NSYSF18640P With mount plate 1800 x 600 x 400 mm £373.14
S3X IP66 Stainless Steel Wall Mounting Enclosures
Enclosures
Accessories
Price Each
Order Code Product Code Description 1+
WXL1674 NSY2SP124 2 std side panels 1200 x 400 mm £83.08
WXL1675 NSY2SP125 2 std side panels 1200 x 500 mm £84.81
WXL1676 NSY2SP126 2 std side panels 1200 x 600 mm £86.78
WXL1677 NSY2SP128 2 std side panels 1200 x 800 mm £90.00
WXL1678 NSY2SP144 2 std side panels 1400 x 400 mm £83.84
WXL1679 NSY2SP145 2 std side panels 1400 x 500 mm £84.42
WXL1680 NSY2SP146 2 std side panels 1400 x 600 mm £85.00
WXL1681 NSY2SP148 2 std side panels 1400 x 800 mm £91.75
WXL1682 NSY2SP164 2 std side panels 1600 x 400 mm £84.07
WXL1683 NSY2SP165 2 std side panels 1600 x 500 mm £85.81
WXL1684 NSY2SP166 2 std side panels 1600 x 600 mm £86.89
WXL1685 NSY2SP168 2 std side panels 1600 x 800 mm £95.63
WXL1686 NSY2SP184 2 std side panels 1800 x 400 mm £86.19
WXL1687 NSY2SP185 2 std side panels 1800 x 500 mm £94.91
WXL1688 NSY2SP186 2 std side panels 1800 x 600 mm £96.85
WXL1689 NSY2SP188 2 std side panels 1800 x 800 mm £100.71
WXL1690 NSY2SP204 2 std side panels 2000 x 400 mm £91.38
WXL1691 NSY2SP205 2 std side panels 2000 x 500 mm £100.97
WXL1692 NSYMP126 Galvanised mount plate 1200 x 600 mm £26.49
WXL1693 NSYMP128 Galvanised mount plate 1200 x 800 mm £34.40
WXL1694 NSYMP146 Galvanised mount plate 1400 x 600 mm £30.44
WXL1695 NSYMP148 Galvanised mount plate 1400 x 800 mm £39.67
WXL1696 NSYMP166 Galvanised mount plate 1600 x 600 mm £34.40
WXL1697 NSYMP168 Galvanised mount plate 1600 x 800 mm £44.93
WXL1698 NSYSPF6100 Front plinth 600 x 100 mm £32.00
WXL1699 NSYSPF6200 Front plinth 600 x 200 mm £57.59
WXL1700 NSYSPF8100 Front plinth 800 x 100 mm £33.69
WXL1701 NSYSPF8200 Front plinth 800 x 200 mm £60.62
WXL1702 NSYSPF10100 Front plinth 1000 x 100 mm £41.77
WXL1703 NSYSPF10200 Front plinth 1000 x 200 mm £75.18
WXL1704 NSYSPF12100 Front plinth 1200 x 100 mm £52.30
WXL1705 NSYSPF12200 Front plinth 1200 x 200 mm £94.13
WXL1706 NSYSPS6100 2 Plinth side panels 100 x 600 mm £11.08
WXL1707 NSYSPS6100SD 2 Plinth side panels 600 x 100 mm £10.59
WXL1708 NSYSPS6200 4 Plinth side panels 200 x 600 mm £16.92
WXL1709 NSYSPS6200SD 2 Plinth side panels 600 x 200 mm £16.44
WXL1710 NSYSPS10100 2 Plinth side panels 1000 x 100 mm £17.62
WXL1711 NSYSPS10200 4 Plinth side panels 1000 x 200 mm £29.07
WXL1712 NSYSPS12100 2 Plinth side panels 1200 x 100 mm £19.84
WXL1713 NSYSPS12200 4 Plinth side panels 1200 x 200 mm £33.52
WXL1714 NSYSFBK Standard coupling kit SF £15.38
Enclosures intended for industrial sectors where cleanliness hygiene and resistance to corrosion are
paramount, in such areas such as chemicals, petroleum, food and agricultural industries
Mono bloc enclosure are constructed of AISI304 stainless steel, thickness 1mm to 1.5mm. Scotch
Brite (AST) mechanical polishing of all surface, provides excellent resistance to corrosion
Polyurethane seal. IP66 rating, IK10 rating against external mechanical impact. Standard door
closure by 3mm double bar lock
Easy reversal of door opening direction by inversion of enclosure
Price Each
Order Code Product Code Dimensions (H x W x D) 1+
WXL1715 NSYS3X3215 300 x 200 x 150 mm £132.10
WXL1716 NSYS3X302515 300 x 250 x 150 mm £136.98
WXL1717 NSYS3X3315 300 x 300 x 150 mm £141.16
WXL1718 NSYS3X4315 400 x 300 x 150 mm £148.32
WXL1719 NSYS3X4320 400 x 300 x 200 mm £162.31
WXL1720 NSYS3X4420 400 x 400 x 200 mm £179.31
WXL1721 NSYS3X4620 400 x 600 x 200 mm £203.97
WXL1722 NSYS3X5420 500 x 400 x 200 mm £203.99
WXL1723 NSYS3X6420 600 x 400 x 200 mm £224.37
WXL1724 NSYS3X6625 600 x 600 x 250 mm £284.84
WXL1725 NSYS3X7525 700 x 500 x 250 mm £305.53
WXL1726 NSYS3X8625 800 x 600 x 250 mm £328.32
WXL1727 NSYS3X8830 800 x 800 x 300 mm £469.78
WXL1728 NSYS3X10830 1000 x 800 x 300 mm £522.64
WXL1729 NSYS3X101030 1000 x 1000 x 300 mm £708.19
WXL1730 NSYS3X12830 1200 x 800 x 300 mm £611.64
WXL1731 NSYS3X121030 1200 x 1000 x 300 mm £782.03
Accessories
Price Each
Order Code Product Code Description 1+
WXL1732 NSYTX2015 304L SS Canopy 200 x 150 mm £81.58
WXL1733 NSYTX2515 304L SS Canopy 250 x 150 mm £84.62
WXL1734 NSYTX3015 304L SS Canopy 300 x 150 mm £87.48
WXL1735 NSYMM32 Plain mount plate 300 x 200 mm £3.82
WXL1736 NSYMM33 Plain mount plate 300 x 300 mm £5.70
WXL1737 NSYMM36 Plain mount plate 300 x 600 mm £10.91
WXL1738 NSYMM43 Plain mount plate 400 x 300 mm £5.80
WXL1739 NSYMM44 Plain mount plate 400 x 400 mm £9.92
WXL1740 NSYMM48 Plain mount plate 400 x 800 mm £22.72
WXL1741 NSYMM53 Plain mount plate 500 x 300 mm £8.85
WXL1742 NSYMM54 Plain mount plate 500 x 400 mm £12.19
WXL1743 NSYMM55 Plain mount plate 500 x 500 mm £14.75
WXL1744 NSYMM64 Plain mount plate 600 x 400 mm £12.91
WXL1745 NSYMM65 Plain mount plate 600 x 500 mm £18.57
WXL1746 NSYMM66 Plain mount plate 600 x 600 mm £21.32
WXL1747 NSYMM75 Plain mount plate 700 x 500 mm £21.32
WXL1748 NSYMM76 Plain mount plate 700 x 600 mm £27.26
WXL1749 NSYMM86 Plain mount plate 800 x 600 mm £30.31
WXL1750 NSYMM88 Plain mount plate 800 x 800 mm £36.81
12
Drives & Soft Starters
Contact Brammer on 0870 240 2100 Drives & Soft Starters 289

PLM IP66 Thalassa Insulated GRP Wall Mounting
Enclosures
Enclosures
Order Code Product Code Description 1+
WXL1750 NSYMM88 Plain mount plate 800 x 800 mm £36.81
WXL1763 NSYDPLM200 Sliding support PLM43/54 £15.00
WXL1764 NSYDPLM250 Sliding support PLM64 £15.00
WXL1765 NSYDPLM300 Sliding support PLM75/86 £15.53
WXL1766 NSYDPLM350 Sliding support PLM108 £16.10
TBS IP66 Thalassa Industrial Boxes
Enclosures
12
Drives & Soft Starters
Self extinguishing mono bloc enclosure
Hot pressed moulded glass fibre reinforced polyester
IP66 protected conforming to EN60529.
Temperature resistance, -50 to +130 degrees
IK10 rating resistance to external mechanical impact
Closure device outside sealed zone, ensuring long term IP66 degree of protection
Integral top and bottom protective canopies for improved protection against splashing water
Price Each
Order Code Product Code Dimensions (H x W x D) 1+
WXL1751 NSYPLM43 430 x 330 x 200 mm £76.42
WXL1752 NSYPLM54 530 x 430 x 200 mm £101.83
WXL1753 NSYPLM64 647 x 436 x 250 mm £112.30
WXL1754 NSYPLM75 747 x 536 x 300 mm £172.64
WXL1755 NSYPLM86 847 x 636 x 300 mm £221.96
Accessories
Price Each
Order Code Product Code Description 1+
WXL1756 NSYPFPLM Wall mount fixing lugs for PLM3025…108 £3.49
WXL1757 NSYPFPLM32 Wall mount fixing lugs for PLM32 £3.72
WXL1758 NSYSFP300 Post fixing device for PLM43 £52.22
WXL1759 NSYSFP400 Post fixing device for PLM54/64 £52.22
WXL1760 NSYSFP500 Post fixing device for PLM75 £54.13
WXL1761 NSYSFP600 Post fixing device for PLM86 £54.13
WXL1762 NSYSFSPLM Vertical pedestal f PLM54/64 £218.72
WXL1735 NSYMM32 Plain mount plate 300 x 200 mm £3.82
WXL1736 NSYMM33 Plain mount plate 300 x 300 mm £5.70
WXL1737 NSYMM36 Plain mount plate 300 x 600 mm £10.91
WXL1738 NSYMM43 Plain mount plate 400 x 300 mm £5.80
WXL1739 NSYMM44 Plain mount plate 400 x 400 mm £9.92
WXL1740 NSYMM48 Plain mount plate 400 x 800 mm £22.72
WXL1741 NSYMM53 Plain mount plate 500 x 300 mm £8.85
WXL1742 NSYMM54 Plain mount plate 500 x 400 mm £12.19
WXL1743 NSYMM55 Plain mount plate 500 x 500 mm £14.75
WXL1744 NSYMM64 Plain mount plate 600 x 400 mm £12.91
WXL1745 NSYMM65 Plain mount plate 600 x 500 mm £18.57
WXL1746 NSYMM66 Plain mount plate 600 x 600 mm £21.32
WXL1747 NSYMM75 Plain mount plate 700 x 500 mm £21.32
WXL1748 NSYMM76 Plain mount plate 700 x 600 mm £27.26
WXL1749 NSYMM86 Plain mount plate 800 x 600 mm £30.31
IP66 rating conforming to IEC60529
IK07 (ABS) conforming to IEC62262
Opaque or transparent covers available
RAL7035 grey
They are self extinguishing industrial boxes conforming to IEC60695
Operating temperature -25 to +60 degrees
Price Each
Order Code Product Code Dimensions (H x W x D) Min. Order Qty 1+
WXL1767 NSYTBS775 65 x 65 x 47 mm 5 £2.43
WXL1768 NSYTBS1176 105 x 65 x 55 mm 5 £3.24
WXL1769 NSYTBS885 80 x 80 x 47 mm 5 £2.64
WXL1770 NSYTBS11116 105 x 105 x 55 mm 5 £3.91
WXL1771 NSYTBS1397 125 x 80 x 65 mm 2 £4.72
WXL1772 NSYTBS16128 150 x 105 x 55 mm 2 £7.35
WXL1773 NSYTBS19128 175 x 105 x 80 mm 2 £8.00
WXL1774 NSYTBS191210H 175 x 107 x 80 mm 2 £8.86
WXL1775 NSYTBS19168 175 x 150 x 80 mm 1 £11.37
WXL1776 NSYTBS191610H 225 x 175 x 80 mm 1 £11.68
WXL1777 NSYTBS24198 225 x 175 x 100 mm 1 £11.91
WXL1778 NSYTBS241910H 225 x 175 x 120 mm 1 £13.08
WXL1779 NSYTBS241912H 275 x 175 x 100 mm 1 £14.73
WXL1780 NSYTBS29248 275 x 225 x 80 mm 1 £21.61
WXL1781 NSYTBS292412H 275 x 225 x 120 mm 1 £23.05
WXL1782 NSYTBS292412 275 x 225 x 120 mm 1 £23.71
WXL1783 NSYTBS292416H 275 x 225 x 160 mm 1 £31.67
WXL1784 NSYTBS342912 325 x 275 x 160 mm 1 £33.57
WXL1785 NSYTBS342916H 325 x 275 x 160 mm 1 £41.81
For switching and
sensing devices, see our
Low Voltage Gear section
290
We work harder to save you money and downtime – Tel: 0870 240 2100

Thermal Management Systems
Ventilation Systems, Fans with Filters
Thermal Controls
RAL7035 as standard, with the option of changing to RAL7032
High protection rating of IP54
Broad range of accessories (IP55 & EMC covers, anti vandalism kit)
Price Each
Order Code Product Code Description Dimensions 1+
WXL1791 NSYCVF38M115PF Filterfan 38m3/h 115V IP54 92 x 92 mm £85.83
WXL1792 NSYCVF85M115PF Filterfan 85m3/h 115V IP54 125 x 125 mm £104.51
WXL1793 NSYCVF165M115PF Filterfan 165m3/h 115V IP54 125 x 125 mm £124.53
WXL1794 NSYCVF300M115PF Filterfan 300m3/h 115V IP54 125 x 125 mm £214.58
WXL1795 NSYCVF560M115PF Filterfan 560m3/h 115V IP54 223 x 223 mm £186.75
WXL1796 NSYCVF850M115PF Filterfan 850m3/h 115V IP54 223 x 223 mm £202.52
WXL1797 NSYCVF38M230PF Filterfan 38m3/h 230V IP54 291 x 291 mm £75.46
WXL1798 NSYCVF85M230PF Filterfan 85m3/h 230V IP54 292 x 291 mm £89.77
WXL1799 NSYCVF165M230PF Filterfan 165m3/h 230V IP54 293 x 291 mm £96.89
WXL1800 NSYCVF300M230PF Filterfan 300m3/h 230V IP54 294 x 291 mm £114.91
WXL1801 NSYCVF560M230PF Filterfan 560m3/h 230V IP54 295 x 291 mm £145.74
WXL1802 NSYCVF850M230PF Filterfan 850m3/h 230V IP54 296 x 291 mm £172.82
12
Drives & Soft Starters
Control of temperature, humidity or both
Devices suitable when internal exceeds the max (cooling action) or min value (heating)
Price Each
Order Code Product Code Description 1+
WXL1786 NSYCCOTHC Sim.Thermostat (NC Heat) Red (ºC) £20.28
WXL1787 NSYCCOTHO Sim.Thermostat (NO Vent.) Blue (ºC) £20.28
WXL1788 NSYCCOTH230VID Electronical Thermostat 230V £49.22
WXL1789 NSYCCOTHCF Simple Thermostat (NC Heat) (ºF) £24.60
WXL1790 NSYCCOTHOF Simple Thermostat (NO vent.) (ºF) £24.60
For Ducting hose,
see our Hose,
Tube and Ducting
section
Contact Brammer on 0870 240 2100 Drives & Soft Starters 291